3 files changed, 0 insertions, 525 deletions
diff --git a/net-wireless/hostapd/Manifest b/net-wireless/hostapd/Manifest
index 1497a6cf79d5..5e2d0c597715 100644
--- a/net-wireless/hostapd/Manifest
+++ b/net-wireless/hostapd/Manifest
@@ -1,3 +1,2 @@
-DIST hostapd-2.8.tar.gz 2169018 BLAKE2B 29e331d8ebb52732d2548734fe9ea55d8401826da7a35962705335da7d81232c785ffa89d77e8ee848148d82bea1d9141cc4d515706eebacb267754829cf7ed6 SHA512 5a352517470912bcb87755a592238eac2d814a7089d4ba1ecb7969f172dbb746a4e9a6c0d47c0d7c4a6a86b04b14ac39147d729fdf3163371c1067490a4897aa
 DIST hostapd-2.9.tar.gz 2244312 BLAKE2B 07308376dd1576313513fba815b220e4ab2f30ed1a402e24b5c8e62ded79c6d718ff47aad1a2222c9e46ffb7334580b556f19a8aef013eab34a8d61d708d2f01 SHA512 66c729380152db18b64520bda55dfa00af3b0264f97b5de100b81a46e2593571626c4bdcf900f0988ea2131e30bc8788f75d8489dd1f57e37fd56e8098e48a9c
 DIST net-wireless_hostapd_2.7-r2_extras.tar.xz 1820 BLAKE2B 5c4daf0e4fcf5ae0803cdbe2aabcc75e89b1e92048e8a01894d73639a16b049174b37eca6b6206c337a2874a6e6d5588d50fa5b8a4813e7f6c22bf02efca852f SHA512 65bc4634c8314280ceab44d1f5d6d62092f4bca48253f107b076211020f6f6502388490aee907f9910846a25ba2da7e4122bdb1873eb2b12bf94e867e3295f4c
diff --git a/net-wireless/hostapd/hostapd-2.8.ebuild b/net-wireless/hostapd/hostapd-2.8.ebuild
deleted file mode 100644
index 631b845e31aa..000000000000
--- a/net-wireless/hostapd/hostapd-2.8.ebuild
+++ /dev/null
@@ -1,262 +0,0 @@
-# Copyright 1999-2019 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI="6"
-
-inherit toolchain-funcs systemd savedconfig
-
-DESCRIPTION="IEEE 802.11 wireless LAN Host AP daemon"
-HOMEPAGE="http://w1.fi"
-EXTRAS_VER="2.7-r2"
-EXTRAS_NAME="${CATEGORY}_${PN}_${EXTRAS_VER}_extras"
-SRC_URI="https://dev.gentoo.org/~andrey_utkin/distfiles/${EXTRAS_NAME}.tar.xz"
-
-if [[ $PV == 9999 ]]; then
-	inherit git-r3
-	EGIT_REPO_URI="https://w1.fi/hostap.git"
-else
-	if [[ $PV =~ ^.*_p[0-9]{8}$ ]]; then
-		SRC_URI+=" https://dev.gentoo.org/~andrey_utkin/distfiles/${P}.tar.xz"
-	else
-		SRC_URI+=" https://w1.fi/releases/${P}.tar.gz"
-	fi
-	# Never stabilize snapshot ebuilds please
-	KEYWORDS="amd64 arm arm64 ~mips ppc x86"
-fi
-
-LICENSE="BSD"
-SLOT="0"
-IUSE="internal-tls ipv6 libressl logwatch netlink sqlite +wps +crda"
-
-DEPEND="
-	libressl? ( dev-libs/libressl:0= )
-	!libressl? (
-		internal-tls? ( dev-libs/libtommath )
-		!internal-tls? ( dev-libs/openssl:0=[-bindist] )
-	)
-	kernel_linux? (
-		dev-libs/libnl:3
-		crda? ( net-wireless/crda )
-	)
-	netlink? ( net-libs/libnfnetlink )
-	sqlite? ( >=dev-db/sqlite-3 )"
-
-RDEPEND="${DEPEND}"
-
-S="${S}/${PN}"
-
-pkg_pretend() {
-	if use internal-tls; then
-		if use libressl; then
-			elog "libressl flag takes precedence over internal-tls"
-		else
-			ewarn "internal-tls implementation is experimental and provides fewer features"
-		fi
-	fi
-}
-
-src_unpack() {
-	# Override default one because we need the SRC_URI ones even in case of 9999 ebuilds
-	default
-	if [[ ${PV} == 9999 ]] ; then
-		git-r3_src_unpack
-	fi
-}
-
-src_prepare() {
-	# Allow users to apply patches to src/drivers for example,
-	# i.e. anything outside ${S}/${PN}
-	pushd ../ >/dev/null || die
-	default
-	popd >/dev/null || die
-
-	sed -i -e "s:/etc/hostapd:/etc/hostapd/hostapd:g" \
-		"${S}/hostapd.conf" || die
-}
-
-src_configure() {
-	local CONFIG="${S}/.config"
-
-	restore_config "${CONFIG}"
-	if [[ -f "${CONFIG}" ]]; then
-		default_src_configure
-		return 0
-	fi
-
-	# toolchain setup
-	echo "CC = $(tc-getCC)" > ${CONFIG}
-
-	# EAP authentication methods
-	echo "CONFIG_EAP=y" >> ${CONFIG}
-	echo "CONFIG_ERP=y" >> ${CONFIG}
-	echo "CONFIG_EAP_MD5=y" >> ${CONFIG}
-
-	if use internal-tls && ! use libressl; then
-		echo "CONFIG_TLS=internal" >> ${CONFIG}
-	else
-		# SSL authentication methods
-		echo "CONFIG_EAP_FAST=y" >> ${CONFIG}
-		echo "CONFIG_EAP_TLS=y" >> ${CONFIG}
-		echo "CONFIG_EAP_TTLS=y" >> ${CONFIG}
-		echo "CONFIG_EAP_MSCHAPV2=y" >> ${CONFIG}
-		echo "CONFIG_EAP_PEAP=y" >> ${CONFIG}
-		echo "CONFIG_TLSV11=y" >> ${CONFIG}
-		echo "CONFIG_TLSV12=y" >> ${CONFIG}
-		echo "CONFIG_EAP_PWD=y" >> ${CONFIG}
-	fi
-
-	if use wps; then
-		# Enable Wi-Fi Protected Setup
-		echo "CONFIG_WPS=y" >> ${CONFIG}
-		echo "CONFIG_WPS2=y" >> ${CONFIG}
-		echo "CONFIG_WPS_UPNP=y" >> ${CONFIG}
-		echo "CONFIG_WPS_NFC=y" >> ${CONFIG}
-		einfo "Enabling Wi-Fi Protected Setup support"
-	fi
-
-	echo "CONFIG_EAP_IKEV2=y" >> ${CONFIG}
-	echo "CONFIG_EAP_TNC=y" >> ${CONFIG}
-	echo "CONFIG_EAP_GTC=y" >> ${CONFIG}
-	echo "CONFIG_EAP_SIM=y" >> ${CONFIG}
-	echo "CONFIG_EAP_AKA=y" >> ${CONFIG}
-	echo "CONFIG_EAP_AKA_PRIME=y" >> ${CONFIG}
-	echo "CONFIG_EAP_EKE=y" >> ${CONFIG}
-	echo "CONFIG_EAP_PAX=y" >> ${CONFIG}
-	echo "CONFIG_EAP_PSK=y" >> ${CONFIG}
-	echo "CONFIG_EAP_SAKE=y" >> ${CONFIG}
-	echo "CONFIG_EAP_GPSK=y" >> ${CONFIG}
-	echo "CONFIG_EAP_GPSK_SHA256=y" >> ${CONFIG}
-
-	einfo "Enabling drivers: "
-
-	# drivers
-	echo "CONFIG_DRIVER_HOSTAP=y" >> ${CONFIG}
-	einfo "  HostAP driver enabled"
-	echo "CONFIG_DRIVER_WIRED=y" >> ${CONFIG}
-	einfo "  Wired driver enabled"
-	echo "CONFIG_DRIVER_NONE=y" >> ${CONFIG}
-	einfo "  None driver enabled"
-
-	einfo "  nl80211 driver enabled"
-	echo "CONFIG_DRIVER_NL80211=y" >> ${CONFIG}
-
-	# epoll
-	echo "CONFIG_ELOOP_EPOLL=y" >> ${CONFIG}
-
-	# misc
-	echo "CONFIG_DEBUG_FILE=y" >> ${CONFIG}
-	echo "CONFIG_PKCS12=y" >> ${CONFIG}
-	echo "CONFIG_RADIUS_SERVER=y" >> ${CONFIG}
-	echo "CONFIG_IAPP=y" >> ${CONFIG}
-	echo "CONFIG_IEEE80211R=y" >> ${CONFIG}
-	echo "CONFIG_IEEE80211W=y" >> ${CONFIG}
-	echo "CONFIG_IEEE80211N=y" >> ${CONFIG}
-	echo "CONFIG_IEEE80211AC=y" >> ${CONFIG}
-	echo "CONFIG_PEERKEY=y" >> ${CONFIG}
-	echo "CONFIG_RSN_PREAUTH=y" >> ${CONFIG}
-	echo "CONFIG_INTERWORKING=y" >> ${CONFIG}
-	echo "CONFIG_FULL_DYNAMIC_VLAN=y" >> ${CONFIG}
-	echo "CONFIG_HS20=y" >> ${CONFIG}
-	echo "CONFIG_WNM=y" >> ${CONFIG}
-	echo "CONFIG_FST=y" >> ${CONFIG}
-	echo "CONFIG_FST_TEST=y" >> ${CONFIG}
-	echo "CONFIG_ACS=y" >> ${CONFIG}
-
-	if use netlink; then
-		# Netlink support
-		echo "CONFIG_VLAN_NETLINK=y" >> ${CONFIG}
-	fi
-
-	if use ipv6; then
-		# IPv6 support
-		echo "CONFIG_IPV6=y" >> ${CONFIG}
-	fi
-
-	if use sqlite; then
-		# Sqlite support
-		echo "CONFIG_SQLITE=y" >> ${CONFIG}
-	fi
-
-	# If we are using libnl 2.0 and above, enable support for it
-	# Removed for now, since the 3.2 version is broken, and we don't
-	# support it.
-	if has_version ">=dev-libs/libnl-3.2"; then
-		echo "CONFIG_LIBNL32=y" >> .config
-	fi
-
-	# TODO: Add support for BSD drivers
-
-	default_src_configure
-}
-
-src_compile() {
-	emake V=1
-
-	if use libressl || ! use internal-tls; then
-		emake V=1 nt_password_hash
-		emake V=1 hlr_auc_gw
-	fi
-}
-
-src_install() {
-	insinto /etc/${PN}
-	doins ${PN}.{conf,accept,deny,eap_user,radius_clients,sim_db,wpa_psk}
-
-	fperms -R 600 /etc/${PN}
-
-	dosbin ${PN}
-	dobin ${PN}_cli
-
-	if use libressl || ! use internal-tls; then
-		dobin nt_password_hash hlr_auc_gw
-	fi
-
-	newinitd "${WORKDIR}/${EXTRAS_NAME}"/${PN}-init.d ${PN}
-	newconfd "${WORKDIR}/${EXTRAS_NAME}"/${PN}-conf.d ${PN}
-	systemd_dounit "${WORKDIR}/${EXTRAS_NAME}"/${PN}.service
-
-	doman ${PN}{.8,_cli.1}
-
-	dodoc ChangeLog README
-	use wps && dodoc README-WPS
-
-	docinto examples
-	dodoc wired.conf
-
-	if use logwatch; then
-		insinto /etc/log.d/conf/services/
-		doins logwatch/${PN}.conf
-
-		exeinto /etc/log.d/scripts/services/
-		doexe logwatch/${PN}
-	fi
-
-	save_config .config
-}
-
-pkg_postinst() {
-	einfo
-	einfo "If you are running openRC you need to follow this instructions:"
-	einfo "In order to use ${PN} you need to set up your wireless card"
-	einfo "for master mode in /etc/conf.d/net and then start"
-	einfo "/etc/init.d/${PN}."
-	einfo
-	einfo "Example configuration:"
-	einfo
-	einfo "config_wlan0=( \"192.168.1.1/24\" )"
-	einfo "channel_wlan0=\"6\""
-	einfo "essid_wlan0=\"test\""
-	einfo "mode_wlan0=\"master\""
-	einfo
-	#if [ -e "${KV_DIR}"/net/mac80211 ]; then
-	#	einfo "This package now compiles against the headers installed by"
-	#	einfo "the kernel source for the mac80211 driver. You should "
-	#	einfo "re-emerge ${PN} after upgrading your kernel source."
-	#fi
-
-	if use wps; then
-		einfo "You have enabled Wi-Fi Protected Setup support, please"
-		einfo "read the README-WPS file in /usr/share/doc/${P}"
-		einfo "for info on how to use WPS"
-	fi
-}
diff --git a/net-wireless/hostapd/hostapd-2.9.ebuild b/net-wireless/hostapd/hostapd-2.9.ebuild
deleted file mode 100644
index 425e0b513fa2..000000000000
--- a/net-wireless/hostapd/hostapd-2.9.ebuild
+++ /dev/null
@@ -1,262 +0,0 @@
-# Copyright 1999-2019 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI="6"
-
-inherit toolchain-funcs systemd savedconfig
-
-DESCRIPTION="IEEE 802.11 wireless LAN Host AP daemon"
-HOMEPAGE="http://w1.fi"
-EXTRAS_VER="2.7-r2"
-EXTRAS_NAME="${CATEGORY}_${PN}_${EXTRAS_VER}_extras"
-SRC_URI="https://dev.gentoo.org/~andrey_utkin/distfiles/${EXTRAS_NAME}.tar.xz"
-
-if [[ $PV == 9999 ]]; then
-	inherit git-r3
-	EGIT_REPO_URI="https://w1.fi/hostap.git"
-else
-	if [[ $PV =~ ^.*_p[0-9]{8}$ ]]; then
-		SRC_URI+=" https://dev.gentoo.org/~andrey_utkin/distfiles/${P}.tar.xz"
-	else
-		SRC_URI+=" https://w1.fi/releases/${P}.tar.gz"
-	fi
-	# Never stabilize snapshot ebuilds please
-	KEYWORDS="amd64 arm ~arm64 ~mips ppc x86"
-fi
-
-LICENSE="BSD"
-SLOT="0"
-IUSE="internal-tls ipv6 libressl logwatch netlink sqlite +wps +crda"
-
-DEPEND="
-	libressl? ( dev-libs/libressl:0= )
-	!libressl? (
-		internal-tls? ( dev-libs/libtommath )
-		!internal-tls? ( dev-libs/openssl:0=[-bindist] )
-	)
-	kernel_linux? (
-		dev-libs/libnl:3
-		crda? ( net-wireless/crda )
-	)
-	netlink? ( net-libs/libnfnetlink )
-	sqlite? ( >=dev-db/sqlite-3 )"
-
-RDEPEND="${DEPEND}"
-
-S="${S}/${PN}"
-
-pkg_pretend() {
-	if use internal-tls; then
-		if use libressl; then
-			elog "libressl flag takes precedence over internal-tls"
-		else
-			ewarn "internal-tls implementation is experimental and provides fewer features"
-		fi
-	fi
-}
-
-src_unpack() {
-	# Override default one because we need the SRC_URI ones even in case of 9999 ebuilds
-	default
-	if [[ ${PV} == 9999 ]] ; then
-		git-r3_src_unpack
-	fi
-}
-
-src_prepare() {
-	# Allow users to apply patches to src/drivers for example,
-	# i.e. anything outside ${S}/${PN}
-	pushd ../ >/dev/null || die
-	default
-	popd >/dev/null || die
-
-	sed -i -e "s:/etc/hostapd:/etc/hostapd/hostapd:g" \
-		"${S}/hostapd.conf" || die
-}
-
-src_configure() {
-	local CONFIG="${S}/.config"
-
-	restore_config "${CONFIG}"
-	if [[ -f "${CONFIG}" ]]; then
-		default_src_configure
-		return 0
-	fi
-
-	# toolchain setup
-	echo "CC = $(tc-getCC)" > ${CONFIG}
-
-	# EAP authentication methods
-	echo "CONFIG_EAP=y" >> ${CONFIG}
-	echo "CONFIG_ERP=y" >> ${CONFIG}
-	echo "CONFIG_EAP_MD5=y" >> ${CONFIG}
-
-	if use internal-tls && ! use libressl; then
-		echo "CONFIG_TLS=internal" >> ${CONFIG}
-	else
-		# SSL authentication methods
-		echo "CONFIG_EAP_FAST=y" >> ${CONFIG}
-		echo "CONFIG_EAP_TLS=y" >> ${CONFIG}
-		echo "CONFIG_EAP_TTLS=y" >> ${CONFIG}
-		echo "CONFIG_EAP_MSCHAPV2=y" >> ${CONFIG}
-		echo "CONFIG_EAP_PEAP=y" >> ${CONFIG}
-		echo "CONFIG_TLSV11=y" >> ${CONFIG}
-		echo "CONFIG_TLSV12=y" >> ${CONFIG}
-		echo "CONFIG_EAP_PWD=y" >> ${CONFIG}
-	fi
-
-	if use wps; then
-		# Enable Wi-Fi Protected Setup
-		echo "CONFIG_WPS=y" >> ${CONFIG}
-		echo "CONFIG_WPS2=y" >> ${CONFIG}
-		echo "CONFIG_WPS_UPNP=y" >> ${CONFIG}
-		echo "CONFIG_WPS_NFC=y" >> ${CONFIG}
-		einfo "Enabling Wi-Fi Protected Setup support"
-	fi
-
-	echo "CONFIG_EAP_IKEV2=y" >> ${CONFIG}
-	echo "CONFIG_EAP_TNC=y" >> ${CONFIG}
-	echo "CONFIG_EAP_GTC=y" >> ${CONFIG}
-	echo "CONFIG_EAP_SIM=y" >> ${CONFIG}
-	echo "CONFIG_EAP_AKA=y" >> ${CONFIG}
-	echo "CONFIG_EAP_AKA_PRIME=y" >> ${CONFIG}
-	echo "CONFIG_EAP_EKE=y" >> ${CONFIG}
-	echo "CONFIG_EAP_PAX=y" >> ${CONFIG}
-	echo "CONFIG_EAP_PSK=y" >> ${CONFIG}
-	echo "CONFIG_EAP_SAKE=y" >> ${CONFIG}
-	echo "CONFIG_EAP_GPSK=y" >> ${CONFIG}
-	echo "CONFIG_EAP_GPSK_SHA256=y" >> ${CONFIG}
-
-	einfo "Enabling drivers: "
-
-	# drivers
-	echo "CONFIG_DRIVER_HOSTAP=y" >> ${CONFIG}
-	einfo "  HostAP driver enabled"
-	echo "CONFIG_DRIVER_WIRED=y" >> ${CONFIG}
-	einfo "  Wired driver enabled"
-	echo "CONFIG_DRIVER_NONE=y" >> ${CONFIG}
-	einfo "  None driver enabled"
-
-	einfo "  nl80211 driver enabled"
-	echo "CONFIG_DRIVER_NL80211=y" >> ${CONFIG}
-
-	# epoll
-	echo "CONFIG_ELOOP_EPOLL=y" >> ${CONFIG}
-
-	# misc
-	echo "CONFIG_DEBUG_FILE=y" >> ${CONFIG}
-	echo "CONFIG_PKCS12=y" >> ${CONFIG}
-	echo "CONFIG_RADIUS_SERVER=y" >> ${CONFIG}
-	echo "CONFIG_IAPP=y" >> ${CONFIG}
-	echo "CONFIG_IEEE80211R=y" >> ${CONFIG}
-	echo "CONFIG_IEEE80211W=y" >> ${CONFIG}
-	echo "CONFIG_IEEE80211N=y" >> ${CONFIG}
-	echo "CONFIG_IEEE80211AC=y" >> ${CONFIG}
-	echo "CONFIG_PEERKEY=y" >> ${CONFIG}
-	echo "CONFIG_RSN_PREAUTH=y" >> ${CONFIG}
-	echo "CONFIG_INTERWORKING=y" >> ${CONFIG}
-	echo "CONFIG_FULL_DYNAMIC_VLAN=y" >> ${CONFIG}
-	echo "CONFIG_HS20=y" >> ${CONFIG}
-	echo "CONFIG_WNM=y" >> ${CONFIG}
-	echo "CONFIG_FST=y" >> ${CONFIG}
-	echo "CONFIG_FST_TEST=y" >> ${CONFIG}
-	echo "CONFIG_ACS=y" >> ${CONFIG}
-
-	if use netlink; then
-		# Netlink support
-		echo "CONFIG_VLAN_NETLINK=y" >> ${CONFIG}
-	fi
-
-	if use ipv6; then
-		# IPv6 support
-		echo "CONFIG_IPV6=y" >> ${CONFIG}
-	fi
-
-	if use sqlite; then
-		# Sqlite support
-		echo "CONFIG_SQLITE=y" >> ${CONFIG}
-	fi
-
-	# If we are using libnl 2.0 and above, enable support for it
-	# Removed for now, since the 3.2 version is broken, and we don't
-	# support it.
-	if has_version ">=dev-libs/libnl-3.2"; then
-		echo "CONFIG_LIBNL32=y" >> .config
-	fi
-
-	# TODO: Add support for BSD drivers
-
-	default_src_configure
-}
-
-src_compile() {
-	emake V=1
-
-	if use libressl || ! use internal-tls; then
-		emake V=1 nt_password_hash
-		emake V=1 hlr_auc_gw
-	fi
-}
-
-src_install() {
-	insinto /etc/${PN}
-	doins ${PN}.{conf,accept,deny,eap_user,radius_clients,sim_db,wpa_psk}
-
-	fperms -R 600 /etc/${PN}
-
-	dosbin ${PN}
-	dobin ${PN}_cli
-
-	if use libressl || ! use internal-tls; then
-		dobin nt_password_hash hlr_auc_gw
-	fi
-
-	newinitd "${WORKDIR}/${EXTRAS_NAME}"/${PN}-init.d ${PN}
-	newconfd "${WORKDIR}/${EXTRAS_NAME}"/${PN}-conf.d ${PN}
-	systemd_dounit "${WORKDIR}/${EXTRAS_NAME}"/${PN}.service
-
-	doman ${PN}{.8,_cli.1}
-
-	dodoc ChangeLog README
-	use wps && dodoc README-WPS
-
-	docinto examples
-	dodoc wired.conf
-
-	if use logwatch; then
-		insinto /etc/log.d/conf/services/
-		doins logwatch/${PN}.conf
-
-		exeinto /etc/log.d/scripts/services/
-		doexe logwatch/${PN}
-	fi
-
-	save_config .config
-}
-
-pkg_postinst() {
-	einfo
-	einfo "If you are running openRC you need to follow this instructions:"
-	einfo "In order to use ${PN} you need to set up your wireless card"
-	einfo "for master mode in /etc/conf.d/net and then start"
-	einfo "/etc/init.d/${PN}."
-	einfo
-	einfo "Example configuration:"
-	einfo
-	einfo "config_wlan0=( \"192.168.1.1/24\" )"
-	einfo "channel_wlan0=\"6\""
-	einfo "essid_wlan0=\"test\""
-	einfo "mode_wlan0=\"master\""
-	einfo
-	#if [ -e "${KV_DIR}"/net/mac80211 ]; then
-	#	einfo "This package now compiles against the headers installed by"
-	#	einfo "the kernel source for the mac80211 driver. You should "
-	#	einfo "re-emerge ${PN} after upgrading your kernel source."
-	#fi
-
-	if use wps; then
-		einfo "You have enabled Wi-Fi Protected Setup support, please"
-		einfo "read the README-WPS file in /usr/share/doc/${P}"
-		einfo "for info on how to use WPS"
-	fi
-}