diff options
Diffstat (limited to 'mail-mta/exim/exim-4.94.2-r9.ebuild')
| -rw-r--r-- | mail-mta/exim/exim-4.94.2-r9.ebuild | 661 |
1 files changed, 661 insertions, 0 deletions
diff --git a/mail-mta/exim/exim-4.94.2-r9.ebuild b/mail-mta/exim/exim-4.94.2-r9.ebuild new file mode 100644 index 000000000000..c62c296b2534 --- /dev/null +++ b/mail-mta/exim/exim-4.94.2-r9.ebuild @@ -0,0 +1,661 @@ +# Copyright 1999-2022 Gentoo Authors +# Distributed under the terms of the GNU General Public License v2 + +EAPI="7" + +inherit db-use toolchain-funcs pam systemd + +IUSE="arc berkdb +dane dcc +dkim dlfunc dmarc +dnsdb doc dovecot-sasl +dsn exiscan-acl gdbm gnutls idn ipv6 ldap lmtp maildir mbx +mysql nis pam perl pkcs11 postgres +prdr proxy radius redis sasl selinux +socks5 spf sqlite srs +srs-alt srs-native +ssl syslog tdb tcpd +tpda X" +REQUIRED_USE=" + arc? ( dkim spf ) + dane? ( ssl !gnutls ) + dmarc? ( dkim spf ) + dkim? ( ssl !gnutls ) + gnutls? ( ssl ) + pkcs11? ( ssl ) + spf? ( exiscan-acl ) + srs? ( + exiscan-acl + ^^ ( srs-alt srs-native ) + ) + || ( berkdb gdbm tdb ) +" +# NOTE on USE="gnutls dane", gnutls[dane] is masked in base, unmasked +# for x86 and amd64 only, due to this, repoman won't allow depending on +# gnutls[dane] for all else. Because we cannot express USE=dane when +# USE=gnutls is in effect only in package.use.mask, the only option we +# have left is to a) ignore the dependency (but that results in bug +# #661164) or b) mask the usage of USE=dane with USE=gnutls. Both are +# incorrect, but b) is the only "correct" view from repoman. +# We cannot express a required use for berkdb/gdbm/tdb correctly because +# berkdb and gdbm are both enabled in base profile + +SDIR=$([[ ${PV} == *_rc* ]] && echo /test + [[ ${PV} == *.*.*.* ]] && echo /fixes) +COMM_URI="https://downloads.exim.org/exim4${SDIR}" + +DESCRIPTION="A highly configurable, drop-in replacement for sendmail" +SRC_URI="${COMM_URI}/${P//_rc/-RC}.tar.xz + mirror://gentoo/system_filter.exim.gz + doc? ( ${COMM_URI}/${PN}-pdf-${PV//_rc/-RC}.tar.xz )" +HOMEPAGE="https://www.exim.org/" + +SLOT="0" +LICENSE="GPL-2" +KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~ppc ~ppc64 ~sparc ~x86 ~x86-solaris" + +COMMON_DEPEND=">=sys-apps/sed-4.0.5 + dev-libs/libpcre:= + tdb? ( sys-libs/tdb:= ) + !tdb? ( berkdb? ( >=sys-libs/db-3.2:= <sys-libs/db-6:= ) ) + !tdb? ( !berkdb? ( sys-libs/gdbm:= ) ) + idn? ( net-dns/libidn:= net-dns/libidn2:= ) + perl? ( dev-lang/perl:= ) + pam? ( sys-libs/pam ) + tcpd? ( sys-apps/tcp-wrappers ) + ssl? ( + gnutls? ( + net-libs/gnutls:0=[pkcs11?] + dev-libs/libtasn1 + ) + !gnutls? ( + dev-libs/openssl:0= + ) + ) + ldap? ( >=net-nds/openldap-2.0.7:= ) + elibc_glibc? ( + net-libs/libnsl:= + nis? ( + net-libs/libtirpc:= + >=net-libs/libnsl-1:= + ) + ) + mysql? ( dev-db/mysql-connector-c:= ) + postgres? ( dev-db/postgresql:= ) + sasl? ( >=dev-libs/cyrus-sasl-2.1.26-r2 ) + redis? ( dev-libs/hiredis:= ) + spf? ( >=mail-filter/libspf2-1.2.5-r1 ) + dmarc? ( mail-filter/opendmarc:= ) + srs? ( srs-alt? ( mail-filter/libsrs_alt ) ) + X? ( + x11-libs/libX11 + x11-libs/libXmu + x11-libs/libXt + x11-libs/libXaw + ) + sqlite? ( dev-db/sqlite ) + radius? ( net-dialup/freeradius-client ) + virtual/libcrypt:= + virtual/libiconv + " + # added X check for #57206 +BDEPEND="virtual/pkgconfig" +DEPEND="${COMMON_DEPEND}" +RDEPEND="${COMMON_DEPEND} + !mail-mta/courier + !mail-mta/esmtp + !mail-mta/msmtp[mta] + !mail-mta/netqmail + !mail-mta/nullmailer + !mail-mta/postfix + !mail-mta/sendmail + !mail-mta/opensmtpd + !mail-mta/ssmtp[mta] + >=net-mail/mailbase-0.00-r5 + virtual/logger + dcc? ( mail-filter/dcc ) + selinux? ( sec-policy/selinux-exim ) + " + +S=${WORKDIR}/${P//_rc/-RC} + +src_prepare() { + # Legacy patches which need a respin for -p1 + eapply -p0 "${FILESDIR}"/exim-4.14-tail.patch + eapply -p0 "${FILESDIR}"/exim-4.74-radius-db-ENV-clash.patch # 287426 + eapply "${FILESDIR}"/exim-4.93-as-needed-ldflags.patch # 352265, 391279 + eapply -p0 "${FILESDIR}"/exim-4.76-crosscompile.patch # 266591 + eapply "${FILESDIR}"/exim-4.69-r1.27021.patch + eapply "${FILESDIR}"/exim-4.94-localscan_dlopen.patch + eapply "${FILESDIR}"/exim-4.94.2-fix-crash-resolve.patch # 799368 upstr + eapply "${FILESDIR}"/exim-4.94-CVE-2022-3559.patch # 877607 upstr + + # for this reason we have a := dep on opendmarc, they changed their + # API in a minor release + if use dmarc && has_version ">=mail-filter/opendmarc-1.4" ; then + eapply "${FILESDIR}"/exim-4.94-opendmarc-1.4.patch + fi + + if use maildir ; then + eapply "${FILESDIR}"/exim-4.94-maildir.patch + else + eapply -p0 "${FILESDIR}"/exim-4.80-spool-mail-group.patch # 438606 + fi + + eapply_user + + # user Exim believes it should be + MAILUSER=mail + MAILGROUP=mail + if use prefix && [[ ${EUID} != 0 ]] ; then + MAILUSER=$(id -un) + MAILGROUP=$(id -gn) + fi +} + +src_configure() { + # general config and paths + + local aliases="${EPREFIX}/etc/mail/aliases" + sed -i \ + -e "/SYSTEM_ALIASES_FILE/s'SYSTEM_ALIASES_FILE'${aliases}'" \ + src/configure.default || die + + sed -i -e 's/^buildname=.*/buildname=exim-gentoo/' Makefile || die + + if use elibc_musl; then + sed -i -e 's/^LIBS = -lnsl/LIBS =/g' OS/Makefile-Linux || die + fi + + local conffile="${EPREFIX}/etc/exim/exim.conf" + sed -e "48i\CFLAGS=${CFLAGS}" \ + -e "s:BIN_DIRECTORY=/usr/exim/bin:BIN_DIRECTORY=${EPREFIX}/usr/sbin:" \ + -e "s;EXIM_USER=;EXIM_USER=ref:${MAILUSER};" \ + -e "s:CONFIGURE_FILE=.*$:CONFIGURE_FILE=${conffile}:" \ + -e "s:ZCAT_COMMAND=.*$:ZCAT_COMMAND=${EPREFIX}/bin/zcat:" \ + -e "s:COMPRESS_COMMAND=.*$:COMPRESS_COMMAND=${EPREFIX}/bin/gzip:" \ + src/EDITME > Local/Makefile || die + + # work on Local/Makefile from now on + cd Local + + cat >> Makefile <<- EOC + INFO_DIRECTORY=${EPREFIX}/usr/share/info + PID_FILE_PATH=${EPREFIX}/run/exim.pid + SPOOL_DIRECTORY=${EPREFIX}/var/spool/exim + HAVE_ICONV=yes + EOC + + # configure db implementation, Exim always needs one for its hints + # database, we prefer tdb and gdbm, since bdb is kind of getting + # less and less support + if use tdb ; then + cat >> Makefile <<- EOC + USE_TDB=yes + DBMLIB = -ltdb + EOC + sed -i -e 's:^USE_DB=yes:# USE_DB=yes:' Makefile || die + sed -i -e 's:^USE_GDBM=yes:# USE_GDBM=yes:' Makefile || die + elif use berkdb ; then + # use the "native" interfaces to the DBM and CDB libraries, support + # passwd and directory lookups by default + local DB_VERS="5.3 5.1 4.8 4.7 4.6 4.5 4.4 4.3 4.2 3.2" + cat >> Makefile <<- EOC + USE_DB=yes + # keep include in CFLAGS because exim.h -> dbstuff.h -> db.h + CFLAGS += -I$(db_includedir ${DB_VERS}) + DBMLIB = -l$(db_libname ${DB_VERS}) + EOC + sed -i -e 's:^USE_GDBM=yes:# USE_GDBM=yes:' Makefile || die + sed -i -e 's:^USE_TDB=yes:# USE_TDB=yes:' Makefile || die + else # must be gdbm via required_use + cat >> Makefile <<- EOC + USE_GDBM=yes + DBMLIB = -lgdbm + EOC + sed -i -e 's:^USE_DB=yes:# USE_DB=yes:' Makefile || die + sed -i -e 's:^USE_TDB=yes:# USE_TDB=yes:' Makefile || die + fi + + # if we use libiconv, now is the time to tell so + if use !elibc_glibc && use !elibc_musl ; then + cat >> Makefile <<- EOC + EXTRALIBS_EXIM=-liconv + EOC + fi + + # support for IPv6 + if use ipv6; then + cat >> Makefile <<- EOC + HAVE_IPV6=YES + EOC + fi + + # support i18n/IDNA + if use idn; then + cat >> Makefile <<- EOC + SUPPORT_I18N=yes + SUPPORT_I18N_2008=yes + EXTRALIBS_EXIM += -lidn -lidn2 + EOC + fi + + # + # mail storage formats + # + + # mailstore is Exim's traditional storage format + cat >> Makefile <<- EOC + SUPPORT_MAILSTORE=yes + EOC + + # mbox + if use mbx; then + cat >> Makefile <<- EOC + SUPPORT_MBX=yes + EOC + fi + + # maildir + if use maildir; then + cat >> Makefile <<- EOC + SUPPORT_MAILDIR=yes + EOC + fi + + # + # lookup methods + # + + # support passwd and directory lookups by default + cat >> Makefile <<- EOC + LOOKUP_CDB=yes + LOOKUP_PASSWD=yes + LOOKUP_DSEARCH=yes + EOC + + if ! use dnsdb; then + # DNSDB lookup is enabled by default + sed -i -e 's:^LOOKUP_DNSDB=yes:# LOOKUP_DNSDB=yes:' Makefile || die + fi + + if use ldap; then + cat >> Makefile <<- EOC + LOOKUP_LDAP=yes + LDAP_LIB_TYPE=OPENLDAP2 + LOOKUP_INCLUDE += -I"${EPREFIX}"/usr/include/ldap + LOOKUP_LIBS += -lldap -llber + EOC + fi + + if use mysql; then + cat >> Makefile <<- EOC + LOOKUP_MYSQL=yes + LOOKUP_INCLUDE += $(mysql_config --include) + LOOKUP_LIBS += $(mysql_config --libs) + EOC + fi + + if use nis; then + cat >> Makefile <<- EOC + LOOKUP_NIS=yes + LOOKUP_NISPLUS=yes + EOC + if use elibc_glibc ; then + cat >> Makefile <<- EOC + LOOKUP_INCLUDE += -I"${EPREFIX}"/usr/include/tirpc + LOOKUP_LIBS += -lnsl + EOC + fi + fi + + if use postgres; then + cat >> Makefile <<- EOC + LOOKUP_PGSQL=yes + LOOKUP_INCLUDE += -I$(pg_config --includedir) + LOOKUP_LIBS += -L$(pg_config --libdir) -lpq + EOC + fi + + if use sqlite; then + cat >> Makefile <<- EOC + LOOKUP_SQLITE=yes + LOOKUP_SQLITE_PC=sqlite3 + EOC + fi + + if use redis; then + cat >> Makefile <<- EOC + LOOKUP_REDIS=yes + LOOKUP_LIBS += -lhiredis + EOC + fi + + # Exim monitor, enabled by default, controlled via X USE-flag, + # disable if not requested, bug #46778 + if use X; then + cp ../exim_monitor/EDITME eximon.conf || die + cat >> Makefile <<- EOC + EXIM_MONITOR=eximon.bin + EOC + fi + + # + # features + # + + # content scanning support + if use exiscan-acl; then + cat >> Makefile <<- EOC + WITH_CONTENT_SCAN=yes + EOC + fi + + # DomainKeys Identified Mail, RFC4871 + if ! use dkim; then + # DKIM is enabled by default + cat >> Makefile <<- EOC + DISABLE_DKIM=yes + EOC + fi + + # Per-Recipient-Data-Response + if ! use prdr; then + # PRDR is enabled by default + cat >> Makefile <<- EOC + DISABLE_PRDR=yes + EOC + fi + + # Transport post-delivery actions + if use !tpda && use !dane; then + # EVENT is enabled by default + cat >> Makefile <<- EOC + DISABLE_EVENT=yes + EOC + fi + + # log to syslog + if use syslog; then + local eximlog="${EPREFIX}/var/log/exim/exim_%s.log" + sed -i \ + -e "s:LOG_FILE_PATH=${eximlog}:LOG_FILE_PATH=syslog:" \ + Makefile || die + cat >> Makefile <<- EOC + LOG_FILE_PATH=syslog + EOC + else + cat >> Makefile <<- EOC + LOG_FILE_PATH=${EPREFIX}/var/log/exim/exim_%s.log + EOC + fi + + # starttls support (ssl) + if use ssl; then + if use gnutls; then + echo "USE_GNUTLS=yes" >> Makefile + echo "USE_GNUTLS_PC=gnutls $(use dane && echo gnutls-dane)" \ + >> Makefile + use pkcs11 || echo "AVOID_GNUTLS_PKCS11=yes" >> Makefile + else + echo "USE_OPENSSL=yes" >> Makefile + echo "USE_OPENSSL_PC=openssl" >> Makefile + fi + else + echo "DISABLE_TLS=yes" >> Makefile + fi + + # TCP wrappers + if use tcpd; then + cat >> Makefile <<- EOC + USE_TCP_WRAPPERS=yes + EXTRALIBS_EXIM += -lwrap + EOC + fi + + # Light Mail Transport Protocol + if use lmtp; then + cat >> Makefile <<- EOC + TRANSPORT_LMTP=yes + EOC + fi + + # embedded Perl + if use perl; then + cat >> Makefile <<- EOC + EXIM_PERL=perl.o + EOC + fi + + # dlfunc + if use dlfunc; then + cat >> Makefile <<- EOC + EXPAND_DLFUNC=yes + HAVE_LOCAL_SCAN=yes + DLOPEN_LOCAL_SCAN=yes + EOC + fi + + # Proxy Protocol + if use proxy; then + cat >> Makefile <<- EOC + SUPPORT_PROXY=yes + EOC + fi + + # SOCKS5 (outbound) proxy support + if use socks5; then + cat >> Makefile <<- EOC + SUPPORT_SOCKS=yes + EOC + fi + + # DANE + if use !dane; then + # DANE is enabled by default + sed -i -e 's:^SUPPORT_DANE=yes:# SUPPORT_DANE=yes:' Makefile || die + fi + + # DMARC + if use dmarc; then + cat >> Makefile <<- EOC + SUPPORT_DMARC=yes + EXTRALIBS_EXIM += -lopendmarc + EOC + fi + + # Sender Policy Framework + if use spf; then + cat >> Makefile <<- EOC + SUPPORT_SPF=yes + EXTRALIBS_EXIM += -lspf2 + EOC + fi + + # + # experimental features + # + + # Authenticated Receive Chain + if use arc; then + echo "EXPERIMENTAL_ARC=yes">> Makefile + fi + + # Distributed Checksum Clearinghouse + if use dcc; then + echo "EXPERIMENTAL_DCC=yes">> Makefile + fi + + # Sender Rewriting Scheme + if use srs; then + # NOTE: we currently USE-default to srs-alt, because this is + # what USE=srs used to be. Eventually we want to rid ourselves + # of this external implementation. + if use srs-alt; then + # historical default, from 4.95 this becomes + # EXPERIMENTAL_SRS_ALT + cat >> Makefile <<- EOC + EXPERIMENTAL_SRS=yes + EXTRALIBS_EXIM += -lsrs_alt + EOC + fi + if use srs-native; then + # this one becomes SUPPORT_SRS in 4.95 + cat >> Makefile <<- EOC + EXPERIMENTAL_SRS_NATIVE=yes + EOC + fi + fi + + # Delivery Sender Notifications extra information in fail message + if use dsn; then + cat >> Makefile <<- EOC + EXPERIMENTAL_DSN_INFO=yes + EOC + fi + + # + # authentication (SMTP AUTH) + # + + # standard bits + cat >> Makefile <<- EOC + AUTH_SPA=yes + AUTH_CRAM_MD5=yes + AUTH_PLAINTEXT=yes + EOC + + # Cyrus SASL + if use sasl; then + cat >> Makefile <<- EOC + CYRUS_SASLAUTHD_SOCKET=${EPREFIX}/run/saslauthd/mux + AUTH_CYRUS_SASL=yes + AUTH_LIBS += -lsasl2 + EOC + fi + + # Dovecot + if use dovecot-sasl; then + cat >> Makefile <<- EOC + AUTH_DOVECOT=yes + EOC + fi + + # Pluggable Authentication Modules + if use pam; then + cat >> Makefile <<- EOC + SUPPORT_PAM=yes + AUTH_LIBS += -lpam + EOC + fi + + # Radius + if use radius; then + cat >> Makefile <<- EOC + RADIUS_CONFIG_FILE=${EPREFIX}/etc/radiusclient/radiusclient.conf + RADIUS_LIB_TYPE=RADIUSCLIENTNEW + AUTH_LIBS += -lfreeradius-client + EOC + fi +} + +src_compile() { + emake CC="$(tc-getCC)" HOSTCC="$(tc-getBUILD_CC)" \ + AR="$(tc-getAR) cq" RANLIB="$(tc-getRANLIB)" FULLECHO='' +} + +src_install() { + cd "${S}"/build-exim-gentoo || die + dosbin exim + if use X; then + dosbin eximon.bin + dosbin eximon + fi + fperms 4755 /usr/sbin/exim + + dosym exim /usr/sbin/sendmail + dosym exim /usr/sbin/rsmtp + dosym exim /usr/sbin/rmail + dosym ../sbin/exim /usr/bin/mailq + dosym ../sbin/exim /usr/bin/newaliases + dosym ../sbin/sendmail /usr/lib/sendmail + + for i in exicyclog exim_dbmbuild exim_dumpdb exim_fixdb exim_lock \ + exim_tidydb exinext exiwhat exigrep eximstats exiqsumm exiqgrep \ + convert4r3 convert4r4 exipick + do + dosbin $i + done + + dodoc -r "${S}"/doc/. + doman "${S}"/doc/exim.8 + use dsn && dodoc "${S}"/README.DSN + use doc && dodoc "${WORKDIR}"/${PN}-pdf-${PV//rc/RC}/doc/*.pdf + + # conf files + insinto /etc/exim + newins "${S}"/src/configure.default exim.conf.dist + if use exiscan-acl; then + newins "${S}"/src/configure.default exim.conf.exiscan-acl + fi + doins "${WORKDIR}"/system_filter.exim + doins "${FILESDIR}"/auth_conf.sub + + if use pam; then + pamd_mimic system-auth exim auth account + fi + + # headers, #436406 + if use dlfunc ; then + # fixup includes so they actually can be found when including + sed -i \ + -e '/#include "\(config\|store\|mytypes\).h"/s:"\(.\+\)":<exim/\1>:' \ + local_scan.h || die + insinto /usr/include/exim + doins {config,local_scan}.h ../src/{mytypes,store}.h + fi + + insinto /etc/logrotate.d + newins "${FILESDIR}/exim.logrotate" exim + + newinitd "${FILESDIR}"/exim.rc10 exim + newconfd "${FILESDIR}"/exim.confd exim + + systemd_dounit \ + "${FILESDIR}"/{exim.service,exim.socket,exim-submission.socket} + systemd_newunit \ + "${FILESDIR}"/exim_at.service 'exim@.service' + systemd_newunit \ + "${FILESDIR}"/exim-submission_at.service 'exim-submission@.service' + + diropts -m 0750 -o ${MAILUSER} -g ${MAILGROUP} + keepdir /var/log/${PN} +} + +pkg_postinst() { + if [[ ! -f ${EROOT}/etc/exim/exim.conf ]] ; then + einfo "${EROOT}/etc/exim/system_filter.exim is a sample system_filter." + einfo "${EROOT}/etc/exim/auth_conf.sub contains the configuration sub" + einfo "for using smtp auth." + einfo "Please create ${EROOT}/etc/exim/exim.conf from" + einfo " ${EROOT}/etc/exim/exim.conf.dist." + fi + if use dmarc ; then + einfo "DMARC support requires ${EROOT}/etc/exim/opendmarc.tlds" + einfo "you can populate this file with the contents downloaded from" + einfo " https://publicsuffix.org/list/public_suffix_list.dat" + fi + if use dcc ; then + einfo "DCC support is experimental, you can find some limited" + einfo "documentation at the bottom of this prerelease message:" + einfo " http://article.gmane.org/gmane.mail.exim.devel/3579" + fi + if use srs ; then + einfo "SRS support is experimental in this release of Exim" + if use srs-alt; then + elog "You are using libsrs_alt to implement SRS support." + elog "In future release of Exim, the native SRS implementation" + elog "(USE=srs-native) will become the default. Please prepare" + elog "your package.use or switch to USE=srs-native now." + fi + fi + use dsn && einfo "extra information in fail DSN message is experimental" + einfo + elog "Note that this release contains a tainted variable check that" + elog "is likely to break your configuration used with Exim 4.93 and before." + elog "Please check your transports for occurences of \$local_part, and" + elog "use a replacement like \$local_part_data where possible." +} |