sys-block/sas3ircu: don't require /boot mounted with USE=-uefi

If we're not installing UEFI files, there is no point in requiring /boot
to be mounted read-write.

Also fix typo thier=>their.

Signed-off-by: Jaco Kroon <jaco@uls.co.za>
Closes: https://github.com/gentoo/gentoo/pull/37226
Signed-off-by: Joonas Niilola <juippis@gentoo.org>

1 files changed, 100 insertions, 0 deletions

diff --git a/sys-block/sas3ircu/sas3ircu-16-r2.ebuild b/sys-block/sas3ircu/sas3ircu-16-r2.ebuild
new file mode 100644
index 000000000000..19b627edc362
--- /dev/null
+++ b/sys-block/sas3ircu/sas3ircu-16-r2.ebuild
@@ -0,0 +1,100 @@
+# Copyright 1999-2024 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=8
+
+MY_P="${PN^^}_P${PV}"
+
+DISTFILE_BIN="${MY_P}.zip"
+DISTFILE_DOC="SAS3_IR_UG.pdf"
+SRC_URI_BASE="https://docs.broadcom.com/docs-and-downloads/host-bus-adapters"
+
+inherit mount-boot secureboot
+
+DESCRIPTION="LSI MPT-SAS3 controller management tool"
+HOMEPAGE="https://www.broadcom.com/products/storage/host-bus-adapters/sas-9300-8e#downloads"
+SRC_URI="
+	${SRC_URI_BASE}/host-bus-adapters-common-files/sas_sata_12g_p${PV}/${DISTFILE_BIN}
+	https://docs.broadcom.com/docs/${DISTFILE_BIN}
+	doc? ( "${SRC_URI_BASE}/${DISTFILE_DOC}" )
+"
+S="${WORKDIR}/${MY_P}"
+
+LICENSE="LSI"
+SLOT="0"
+KEYWORDS="~amd64 ~arm64 ~ppc64 ~x86 ~x64-solaris"
+IUSE="doc uefi"
+RESTRICT="strip fetch mirror"
+
+BDEPEND="app-arch/unzip"
+
+QA_PREBUILT="opt/lsi/sas3ircu boot/efi/sas3ircu.efi"
+
+pkg_pretend() {
+	use uefi && mount-boot_pkg_pretend
+}
+
+pkg_nofetch() {
+	elog "Broadcom has a mandatory click-through license on their binaries."
+	elog "Please visit ${HOMEPAGE} and download ${DISTFILE_BIN} from the Mangement Software section."
+	elog "If the file has been moved again, the license form might be available at https://docs.broadcom.com/docs/${DISTFILE_BIN}"
+	elog "After downloading, move ${MY_P} into your DISTDIR directory"
+	if use doc; then
+		elog "Please also download 'SAS-3 Integrated RAID Configuration Utility User Guide' (${DISTFILE_DOC}) "
+		elog "and also place it into your DISTDIR directory"
+	fi
+	einfo "${SRC_URI}"
+}
+
+pkg_setup() {
+	use uefi && secureboot_pkg_setup
+}
+
+supportedcards() {
+	elog "This binary supports should support ALL cards, including, but not"
+	elog "limited to the following series:"
+	elog ""
+	elog "LSI SAS 3004"
+	elog "LSI SAS 3008"
+	elog "LSI SAS 3108"
+	elog "LSI SAS 3116"
+	elog "LSI SAS 3208"
+	elog "LSI SAS 3308"
+}
+
+src_install() {
+	# The second number is some sort of internal revision that is inconsistent between releases.
+	local DOCS=( IRCU_MPT_GEN3_Phase"${PV}".0-*.pdf "README_SAS3IRCU_P${PV}.txt" )
+	use doc && DOCS+=( "${DISTDIR}/${DISTFILE_DOC}" )
+
+	default
+
+	local ARCH
+	use amd64 && ARCH="x64"
+	use arm64 && ARCH="arm"
+	use ppc64 && ARCH="ppc64"
+	use x64-solaris && ARCH="solaris_x86"
+	use x86 && ARCH="x86"
+
+	exeinto /opt/lsi/
+	doexe sas3ircu_rel/sas3ircu/sas3ircu_linux_"${ARCH}"_rel/sas3ircu
+
+	if use uefi; then
+		if use amd64 || use arm64; then
+			exeinto /boot/efi/
+			doexe sas3ircu_rel/sas3ircu/sas3ircu_udk_uefi_"${ARCH}"_rel/sas3ircu.efi
+			secureboot_auto_sign --in-place
+		fi
+	fi
+
+	dodir /opt/bin
+	dosym ../lsi/sas3ircu /opt/bin/sas3ircu
+}
+
+pkg_preinst() {
+	use uefi && mount-boot_pkg_preinst
+}
+
+pkg_prerm() {
+	use uefi && mount-boot_pkg_prerm
+}