net-analyzer/openvas-scanner: remove unused files

Signed-off-by: Michael Mair-Keimberger <mmk@levelnine.at>
Closes: https://github.com/gentoo/gentoo/pull/28823
Signed-off-by: Conrad Kostecki <conikost@gentoo.org>

8 files changed, 0 insertions, 319 deletions

diff --git a/net-analyzer/openvas-scanner/files/gvm-feed-sync-20.8.1.sh b/net-analyzer/openvas-scanner/files/gvm-feed-sync-20.8.1.sh
deleted file mode 100644
index 178f49eb0493..000000000000
--- a/net-analyzer/openvas-scanner/files/gvm-feed-sync-20.8.1.sh
+++ /dev/null
@@ -1,45 +0,0 @@
-#!/bin/sh
-# Copyright 1999-2021 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-# GVM cron script that updates feed.
-
-# Start to update FEED & First NVT.
-try=0
-until [ $try -ge 5 ]; do
-      greenbone-feed-sync --type GVMD_DATA --curl &>/dev/null && break
-      try=$[$try+1]
-      sleep 30
-done
-
-# Check status
-if [ $? -eq 0 ]; then
-   # Avoid your IP temporary banned because of multiple connection
-   sleep 5
-   # Try to update scapdata.
-   try=0
-   until [ $try -ge 5 ]; do
-         greenbone-feed-sync --type SCAP &>/dev/null && break
-         try=$[$try+1]
-         sleep 30
-   done
-
-   # Check status
-   if [ $? -eq 0 ]; then
-      # Avoid your IP temporary banned because of multiple connection
-      sleep 5
-      # Try to update certdata
-      try=0
-      until [ $try -ge 5 ]; do
-            greenbone-feed-sync --type CERT &>/dev/null && break
-            try=$[$try+1]
-            sleep 30
-      done
-
-       # Check status
-       if [ $? -eq 0 ]; then
-          exit 0
-          else
-             exit 1
-       fi
-   fi
-fi
diff --git a/net-analyzer/openvas-scanner/files/gvm-feed-sync.cron b/net-analyzer/openvas-scanner/files/gvm-feed-sync.cron
deleted file mode 100644
index 5563b92929b1..000000000000
--- a/net-analyzer/openvas-scanner/files/gvm-feed-sync.cron
+++ /dev/null
@@ -1 +0,0 @@
-0 2 * * * gvm [ -x /etc/gvm/gvm-feed-sync.sh ] && /bin/bash /etc/gvm/gvm-feed-sync.sh > /dev/null
diff --git a/net-analyzer/openvas-scanner/files/gvm-feed-sync.sh b/net-analyzer/openvas-scanner/files/gvm-feed-sync.sh
deleted file mode 100644
index ba21632a4d6c..000000000000
--- a/net-analyzer/openvas-scanner/files/gvm-feed-sync.sh
+++ /dev/null
@@ -1,45 +0,0 @@
-#!/bin/sh
-# Copyright 1999-2019 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-# GVM cron script that updates feed.
-
-# Start to update FEED & First NVT.
-try=0
-until [ $try -ge 5 ]; do
-      greenbone-nvt-sync --curl &>/dev/null && break
-      try=$[$try+1]
-      sleep 30
-done
-
-# Check status
-if [ $? -eq 0 ]; then
-   # Avoid your IP temporary banned because of multiple connection
-   sleep 5
-   # Try to update scapdata.
-   try=0
-   until [ $try -ge 5 ]; do
-         greenbone-scapdata-sync &>/dev/null && break
-         try=$[$try+1]
-         sleep 30
-   done
-
-   # Check status
-   if [ $? -eq 0 ]; then
-      # Avoid your IP temporary banned because of multiple connection
-      sleep 5
-      # Try to update certdata
-      try=0
-      until [ $try -ge 5 ]; do
-            greenbone-certdata-sync &>/dev/null && break
-            try=$[$try+1]
-            sleep 30
-      done
-
-       # Check status
-       if [ $? -eq 0 ]; then
-          exit 0
-          else
-             exit 1
-       fi
-   fi
-fi
diff --git a/net-analyzer/openvas-scanner/files/openvassd-daemon.conf b/net-analyzer/openvas-scanner/files/openvassd-daemon.conf
deleted file mode 100644
index 6bb70d165355..000000000000
--- a/net-analyzer/openvas-scanner/files/openvassd-daemon.conf
+++ /dev/null
@@ -1,17 +0,0 @@
-# OpenVAS Scanner command args
-
-# e.g --foreground
-OPENVAS_SCANNER_OPTIONS=""
-
-# Scanner listen socket
-OPENVAS_SCANNER_LISTEN_SOCKET="--unix-socket=/var/run/openvassd.sock" 
-
-# Scanner listen owner
-OPENVAS_SCANNER_LISTEN_OWNER="--listen-owner=gvm"
-
-# Scanner listen group
-OPENVAS_SCANNER_LISTEN_GROUP="--listen-group=gvm"
-
-# Scanner listen mode
-OPENVAS_SCANNER_LISTEN_MODE="--listen-mode=755"
-
diff --git a/net-analyzer/openvas-scanner/files/openvassd.gvm.conf b/net-analyzer/openvas-scanner/files/openvassd.gvm.conf
deleted file mode 100644
index 5dfb8b527454..000000000000
--- a/net-analyzer/openvas-scanner/files/openvassd.gvm.conf
+++ /dev/null
@@ -1,124 +0,0 @@
-# You can get detailed informations from https://linux.die.net/man/8/openvassd
-# Configuration file of the OpenVAS Security Scanner
-# Every line starting with a '#' is a comment
-
-[Misc]
-
-# Path to the security checks folder:
-plugins_folder = /var/lib/openvas/plugins
-
-# Path to OpenVAS caching folder:
-cache_folder = /var/cache/openvas
-
-# Path to OpenVAS include directories:
-# (multiple entries are separated with colon ':')
-include_folders = /var/lib/openvas/plugins
-
-# Config File
-config_file = /etc/openvas/openvassd.conf
-
-# Maximum number of simultaneous hosts tested :
-max_hosts = 30
-
-# Maximum number of simultaneous checks against each host tested :
-max_checks = 10
-
-# Niceness. If set to 'yes', openvassd will renice itself to 10.
-be_nice = no
-
-# Log file (or 'syslog') :
-logfile = /var/log/gvm/openvassd.log
-
-# Shall we log every details of the attack ? (disk intensive)
-log_whole_attack = no
-
-# Log the name of the plugins that are loaded by the server ?
-log_plugins_name_at_load = no
-
-# Dump file for debugging output, use `-' for stdout
-dumpfile = /var/log/gvm/openvassd.dump
-
-# Rules file :
-rules = /etc/openvas/openvassd.rules
-
-# CGI paths to check for (cgi-bin:/cgi-aws:/ can do)
-cgi_path = /cgi-bin:/scripts
-
-# Range of the ports the port scanners will scan :
-# 'default' means that OpenVAS will scan ports found in its
-# services file.
-port_range = default
-
-# Optimize the test (recommended) :
-# Turn off for push hard but increase false positive and slow down scans
-optimize_test = yes
-
-# Optimization :
-# Read timeout for the sockets of the tests :
-checks_read_timeout = 5
-
-# Ports against which two plugins should not be run simultaneously :
-# non_simult_ports = Services/www, 139, Services/finger
-non_simult_ports = 139, 445
-
-# Maximum lifetime of a plugin (in seconds) :
-plugins_timeout = 320
-
-# Safe checks rely on banner grabbing & If enabled push harder to target:
-safe_checks = yes
-
-# Automatically activate the plugins that are depended on
-auto_enable_dependencies = yes
-
-# Do not echo data from plugins which have been automatically enabled
-silent_dependencies = no
-
-# Designate hosts by MAC address, not IP address (useful for DHCP networks)
-use_mac_addr = no
-
-
-#--- Knowledge base saving (can be configured by the client) :
-# Save the knowledge base on disk :
-save_knowledge_base = no
-
-# Restore the KB for each test :
-kb_restore = no
-
-# Only test hosts whose KB we do not have :
-only_test_hosts_whose_kb_we_dont_have = no
-
-# Only test hosts whose KB we already have :
-only_test_hosts_whose_kb_we_have = no
-
-# KB test replay :
-kb_dont_replay_scanners = no
-kb_dont_replay_info_gathering = no
-kb_dont_replay_attacks = no
-kb_dont_replay_denials = no
-kb_max_age = 864000
-#--- end of the KB section
-
-# Redis socket default setting
-db_address = /tmp/redis.sock
-
-# If this option is set, OpenVAS will not scan a network incrementally
-# (10.0.0.1, then 10.0.0.2, 10.0.0.3 and so on..) but will attempt to
-# slice the workload throughout the whole network (ie: it will scan
-# 10.0.0.1, then 10.0.0.127, then 10.0.0.2, then 10.0.0.128 and so on...
-slice_network_addresses = no
-
-# Should consider all the NASL scripts as being signed ? (unsafe if set to 'yes')
-nasl_no_signature_check = yes
-
-#Certificates
-cert_file=/var/lib/gvm/CA/servercert.pem
-key_file=/var/lib/gvm/private/CA/serverkey.pem
-ca_file=/var/lib/gvm/CA/cacert.pem
-
-# If you decide to protect your private key with a password,
-# uncomment and change next line
-# pem_password=password
-# If you want to force the use of a client certificate, uncomment next line
-# force_pubkey_auth = yes
-
-#end.
diff --git a/net-analyzer/openvas-scanner/files/openvassd.init b/net-analyzer/openvas-scanner/files/openvassd.init
deleted file mode 100644
index 9bd7332134fc..000000000000
--- a/net-analyzer/openvas-scanner/files/openvassd.init
+++ /dev/null
@@ -1,14 +0,0 @@
-#!/sbin/openrc-run
-# Copyright 1999-2019 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-name="Open Vulnerability Assessment Scanner"
-command="/usr/bin/openvassd"
-command_args="${OPENVAS_SCANNER_OPTIONS} ${OPENVAS_SCANNER_LISTEN_SOCKET} ${OPENVAS_SCANNER_LISTEN_OWNER} ${OPENVAS_SCANNER_LISTEN_GROUP} ${OPENVAS_SCANNER_LISTEN_MODE}"
-pidfile="/run/openvassd.pid"
-command_background="true"
-
-depend() {
-	after bootmisc
-	need localmount net redis
-}
diff --git a/net-analyzer/openvas-scanner/files/openvassd.service b/net-analyzer/openvas-scanner/files/openvassd.service
deleted file mode 100644
index b7d7df8bbab0..000000000000
--- a/net-analyzer/openvas-scanner/files/openvassd.service
+++ /dev/null
@@ -1,16 +0,0 @@
-[Unit]
-Description=Open Vulnerability Assessment Scanner
-After=network.target
-After=redis.service
-Before=gvmd.service
-Requires=redis.service
-
-[Service]
-Type=forking
-EnvironmentFile=-/etc/openvas/sysconfig/openvassd-daemon.conf
-ExecStart=/usr/bin/openvassd $OPENVAS_SCANNER_OPTIONS $OPENVAS_SCANNER_LISTEN_SOCKET $OPENVAS_SCANNER_LISTEN_OWNER $OPENVAS_SCANNER_LISTEN_GROUP $OPENVAS_SCANNER_LISTEN_MODE
-Restart=on-failure
-RestartSec=10
-
-[Install]
-WantedBy=multi-user.target
diff --git a/net-analyzer/openvas-scanner/files/redis.conf.example b/net-analyzer/openvas-scanner/files/redis.conf.example
deleted file mode 100644
index 6a41211aaae8..000000000000
--- a/net-analyzer/openvas-scanner/files/redis.conf.example
+++ /dev/null
@@ -1,57 +0,0 @@
-bind 127.0.0.1
-protected-mode yes
-port 0
-tcp-backlog 511
-unixsocket /tmp/redis.sock
-unixsocketperm 700
-timeout 0
-tcp-keepalive 300
-daemonize no
-supervised no
-pidfile /run/redis/redis.pid
-loglevel notice
-logfile /var/log/redis/redis.log
-databases 16
-always-show-logo yes
-stop-writes-on-bgsave-error yes
-rdbcompression yes
-rdbchecksum yes
-dbfilename dump.rdb
-dir /var/lib/redis/
-slave-serve-stale-data yes
-slave-read-only yes
-repl-diskless-sync no
-repl-diskless-sync-delay 5
-repl-disable-tcp-nodelay no
-slave-priority 100
-lazyfree-lazy-eviction no
-lazyfree-lazy-expire no
-lazyfree-lazy-server-del no
-slave-lazy-flush no
-appendonly no
-appendfilename "appendonly.aof"
-appendfsync everysec
-no-appendfsync-on-rewrite no
-auto-aof-rewrite-percentage 100
-auto-aof-rewrite-min-size 64mb
-aof-load-truncated yes
-aof-use-rdb-preamble no
-lua-time-limit 5000
-slowlog-log-slower-than 10000
-slowlog-max-len 128
-latency-monitor-threshold 0
-notify-keyspace-events ""
-hash-max-ziplist-entries 512
-hash-max-ziplist-value 64
-list-max-ziplist-size -2
-list-compress-depth 0
-set-max-intset-entries 512
-zset-max-ziplist-entries 128
-zset-max-ziplist-value 64
-hll-sparse-max-bytes 3000
-activerehashing yes
-client-output-buffer-limit normal 0 0 0
-client-output-buffer-limit slave 256mb 64mb 60
-client-output-buffer-limit pubsub 32mb 8mb 60
-hz 10
-aof-rewrite-incremental-fsync yes