sci-misc/linuxcnc: treeclean

Bug: https://bugs.gentoo.org/587090
Signed-off-by: Julien Roy <julien@jroy.ca>

2 files changed, 0 insertions, 141 deletions

diff --git a/sci-misc/linuxcnc/linuxcnc-9999.ebuild b/sci-misc/linuxcnc/linuxcnc-9999.ebuild
deleted file mode 100644
index f3cb10abf..000000000
--- a/sci-misc/linuxcnc/linuxcnc-9999.ebuild
+++ /dev/null
@@ -1,126 +0,0 @@
-# Copyright 1999-2024 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=8
-
-PYTHON_COMPAT=( python3_10 )
-PYTHON_REQUIRED_USE="tk"
-
-inherit autotools desktop git-r3 python-single-r1
-
-DESCRIPTION="LinuxCNC"
-HOMEPAGE="http://linuxcnc.org/"
-#SRC_URI="https://downloads.sourceforge.net/gentoocnc/distfiles/${P}.tar.gz"
-#SRC_URI="https://github.com/LinuxCNC/linuxcnc/archive/2.7.zip"
-EGIT_REPO_URI="https://github.com/LinuxCNC/linuxcnc.git https://gitclone.com/github.com/LinuxCNC/linuxcnc.git"
-S="${WORKDIR}"/linuxcnc-9999/src
-
-LICENSE="LGPL-3"
-SLOT="9999"
-IUSE="+gtk modbus rt simulator usb +X"
-# TODO: add shmdrv use flag
-
-DEPEND="
-	${PYTHON_DEPS}
-
-	dev-lang/tcl
-	dev-lang/tk
-	dev-tcltk/bwidget
-	dev-tcltk/tclx
-	dev-tcltk/tkimg
-	media-gfx/graphviz
-	media-libs/mesa
-	net-firewall/iptables
-	sys-devel/gettext
-	sys-process/procps
-	sys-process/psmisc
-	x11-libs/libXinerama
-	x11-apps/mesa-progs
-	virtual/glu
-	virtual/opengl
-
-	$(python_gen_cond_dep '
-		dev-libs/boost[python,${PYTHON_USEDEP}]
-		dev-python/configobj[${PYTHON_USEDEP}]
-		dev-python/lxml[${PYTHON_USEDEP}]
-		dev-python/numpy[${PYTHON_USEDEP}]
-		dev-python/pillow[tk,${PYTHON_USEDEP}]
-		dev-python/pygobject[${PYTHON_USEDEP}]
-		dev-python/pyopengl[${PYTHON_USEDEP}]
-	')
-
-	|| (
-		net-analyzer/openbsd-netcat
-		net-analyzer/netcat
-	)
-
-	modbus? ( <dev-libs/libmodbus-3.1 )
-	gtk? ( x11-libs/gtk+ )
-	rt? ( sys-kernel/rt-sources )
-	usb? ( virtual/libusb )
-	X? (
-		x11-libs/libXaw
-		$(python_gen_cond_dep 'dev-python/python-xlib[${PYTHON_USEDEP}]')
-	)
-"
-RDEPEND="
-	${DEPEND}
-	$(python_gen_cond_dep 'dev-python/yapps[${PYTHON_USEDEP}]')
-"
-
-RESTRICT="bindist"
-REQUIRED_USE="
-	${PYTHON_REQUIRED_USE}
-	rt? ( !simulator )
-"
-
-src_prepare() {
-	default
-	eautoreconf
-}
-
-src_configure() {
-	local myconf=(
-		--enable-non-distributable=yes
-		--with-boost-python=boost_python310
-		--with-kernel-headers=/usr/src/linux/
-		--with-python="${PYTHON}"
-		$(use_with modbus libmodbus)
-	)
-	use gtk || myconf+=( "--disable-gtk" )
-	use rt && myconf+=( "--with-rt-preempt" )
-	use simulator && myconf+=( "--with-realtime=uspace" )
-	use usb || myconf+=( "--without-libusb-1.0" )
-#	use rtai && myconf+=( "--with-realtime=${EPREFIX}/usr/realtime" "--with-module-dir=${EPREFIX}/usr/$(get_libdir)/linuxcnc/rtai/" )
-	use X && myconf+=( "--with-x" )
-
-	econf "${myconf[@]}"
-}
-
-src_install() {
-	emake DESTDIR="${D}" install
-
-	local envd="${T}/51linuxcnc"
-	cat > "${envd}" <<-EOF
-		LDPATH="${EPREFIX}/usr/$(get_libdir)/linuxcnc"
-	EOF
-	doenvd "${envd}"
-
-	insinto "/usr/share/linuxcnc/"
-	doins Makefile.inc
-
-	insinto "/etc/linuxcnc/"
-	doins "../scripts/rtapi.conf"
-
-	insinto "/usr/bin/"
-	doins "../scripts/rip-environment"
-
-	doicon "../linuxcncicon.png"
-	make_desktop_entry linuxcnc LinuxCNC linuxcnc 'Science;Robotics'
-}
-
-pkg_postinst() {
-	elog "Opening machine configuration files from older Versions can crash the application as it cannot load old named modules, e.g. probe_parport.so not found"
-	elog "This is not a Gentoo- or build related error. It looks like linuxcnc 2.8 will have some kind of converter for them."
-	elog "If you created them with stepconf. You can just open the stepconf file and create them new. Don't forget to backup any manual changes (e.g. backlash!) from the .hal and .ini files and make them again."
-}
diff --git a/sci-misc/linuxcnc/metadata.xml b/sci-misc/linuxcnc/metadata.xml
deleted file mode 100644
index df6ba9929..000000000
--- a/sci-misc/linuxcnc/metadata.xml
+++ /dev/null
@@ -1,15 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!DOCTYPE pkgmetadata SYSTEM "https://www.gentoo.org/dtd/metadata.dtd">
-<pkgmetadata>
-	<maintainer type="person">
-		<email>jack9603301@163.com</email>
-		<name>Chunhui Ouyang</name>
-	</maintainer>
-	<use>
-		<flag name="rt">Build with RT_PREEMPT threads modules</flag>
-		<flag name="simulator">Build with posix threads (no realtime)</flag>
-		<flag name="modbus">Build modbus libraries</flag>
-		<!--<flag name="xenomai">Build with xenomai userland threads</flag>-->
-		<!--<flag name="rtai">Build with realtime threads support</flag>-->
-	</use>
-</pkgmetadata>