sci-libs/linux-gpib: Remove old

Package-Manager: Portage-2.3.89, Repoman-2.3.20
Signed-off-by: Andreas K. Hüttel <dilfridge@gentoo.org>

6 files changed, 0 insertions, 288 deletions

diff --git a/sci-libs/linux-gpib/Manifest b/sci-libs/linux-gpib/Manifest
index fa366720b807..c499d53193a8 100644
--- a/sci-libs/linux-gpib/Manifest
+++ b/sci-libs/linux-gpib/Manifest
@@ -1,4 +1,3 @@
 DIST gpib_firmware-2006-11-12.tar.gz 169357 BLAKE2B 05f1be78545e025d76e2b9819a5dcac5a6715dfbb6df5c6fbe8b78900adf8ca7b1c28db350674ff1dd9c77e24507e98b536ca1af8b558c9a46ef8c25034c9769 SHA512 164d6fcfb3af43933f0a16645276f7d527a7aa24ef311f6ae3dcd7f45c41f92c855cf221bc946772f43fc2f9524057abc34bbd7d805c89b33ed7e111bc6870af
-DIST linux-gpib-4.1.0.tar.gz 1529480 BLAKE2B b49df07f15d0f91b9d475052993421979d6776ef15aaa9b7e49632db9018f0cbd9ff38d12e2afa9e8027202e450dfc487ac9e2e6ab719086646d983cc41b3482 SHA512 037ed9e484a83caccb15d2d142eef6f1eec356ae972480ca7a676a318d3e9f844fc1911c1b30869b4bb14ef0b4cd10587a803426df9145966bafe22ca7316bd8
 DIST linux-gpib-4.2.0.tar.gz 1431440 BLAKE2B 7b6adf562963e0785f960c072f3f3d67cb91df9090205d8fecb0dc3170d3a1ac3719732919bae112e06b47387499ffe49a0144e72caa27ba39c85c8b98e56786 SHA512 1505c2c04f16bf7e92b9dd474f09edd242520a96f9e4d8eea88ebd44d0a82d653055155c1bfcde69da5355d609d400e3cb682da8aae83f59f1e565307a3fc4a7
 DIST linux-gpib-4.3.0.tar.gz 1375852 BLAKE2B e2daa444ddf4c0c34084f264247051d4ce1c8103d8ae5d91b02d4742131c1f92ded02775eb0f8b0ea29820e2ae7b61c3132c74084a876e86fbb4efaf11688773 SHA512 8db4eb6d606c68ffacc67988479684fec815fc552756a6c93466ef0dfc93368771bb551944e3afc31db83e72e464ec1fb289fdcf80b4a6be1617e734fe3b9d65
diff --git a/sci-libs/linux-gpib/files/linux-gpib-3.2.21-build.patch b/sci-libs/linux-gpib/files/linux-gpib-3.2.21-build.patch
deleted file mode 100644
index 86ce197ba821..000000000000
--- a/sci-libs/linux-gpib/files/linux-gpib-3.2.21-build.patch
+++ /dev/null
@@ -1,44 +0,0 @@
-diff -ruN linux-gpib-3.2.21.orig/drivers/Makefile.am linux-gpib-3.2.21/drivers/Makefile.am
---- linux-gpib-3.2.21.orig/drivers/Makefile.am	2014-12-13 11:27:55.000000000 +0100
-+++ linux-gpib-3.2.21/drivers/Makefile.am	2014-12-17 17:51:47.152588400 +0100
-@@ -28,39 +28,13 @@
- 		CC="$(LINUX_CC) -I@abs_top_srcdir@ -I@abs_top_srcdir@/drivers/gpib/include -I@abs_top_srcdir@/include" \
- 		SUBDIRS="$(GPIB_ABS_MODULE_SUBDIR)"
- 
--install-data-hook: device-file-check /etc/gpib.conf
-+install-data-hook: /etc/gpib.conf
- 	$(MAKE) -C $(LINUX_SRCDIR) V=1 modules_install\
- 		CC="$(LINUX_CC) -I@abs_top_srcdir@ -I@abs_top_srcdir@/driver/include -I@abs_top_srcdir@/include" \
- 		SUBDIRS="$(GPIB_ABS_MODULE_SUBDIR)" INSTALL_MOD_DIR="gpib"
--	$(DEPMOD) -a
--
--/dev/gpib0:
--	groupadd gpib || echo "group gpib exists"
--	for i in `seq 0 15`; \
--	do \
--		mknod -m u=rw,g=rw,o= /dev/gpib$${i} c $(IBMAJOR) $${i} || exit 1; \
--		chown root:gpib /dev/gpib$${i}; \
--	done
--
--.PHONY : device-file-check
--device-file-check: /dev/gpib0
--	@if [ ! -c /dev/gpib0 ]; then \
--		if [ -a /dev/gpib0 ]; then \
--			echo "A file or directory called /dev/gpib0 exists but it is not" \
--				"a character device.  Delete or move it and try again."; \
--			exit 1; \
--		fi; \
--	fi
--	@ls -l /dev/gpib0 | grep -q "$(IBMAJOR)"; \
--	if [ $$? != 0 ]; then \
--		echo "/dev/gpib0 has the wrong major number. " \
--			"Delete your /dev/gpibX files and try again."; \
--		exit 1; \
--	fi
- 
- #should move this to util/templates Makefile.am when it exists
- /etc/gpib.conf:
--	$(INSTALL_DATA) -D $(top_srcdir)/util/templates/gpib.conf /etc/gpib.conf
- 
- #make sure compiled files, etc don't make it into distribution tarballs
- dist-hook:
diff --git a/sci-libs/linux-gpib/files/linux-gpib-4.0.3-reallydie.patch b/sci-libs/linux-gpib/files/linux-gpib-4.0.3-reallydie.patch
deleted file mode 100644
index e19f8d36755b..000000000000
--- a/sci-libs/linux-gpib/files/linux-gpib-4.0.3-reallydie.patch
+++ /dev/null
@@ -1,16 +0,0 @@
-Index: drivers/Makefile.am
-===================================================================
---- a/drivers/Makefile.am	(revision 1602)
-+++ b/drivers/Makefile.am	(working copy)
-@@ -15,10 +15,8 @@
- 
- -include $(top_srcdir)/util/linux_flags/flags
- 
--#ignore errors from kernel's make modules in all-local, to avoid failure of make install
--#on nfs filesystem with root_squash
- all-local:
--	-$(MAKE) -C $(LINUX_SRCDIR) V=1 modules\
-+	$(MAKE) -C $(LINUX_SRCDIR) V=1 modules\
- 		CC="$(LINUX_CC) -I@abs_top_srcdir@ -I@abs_top_srcdir@/drivers/gpib/include -I@abs_top_srcdir@/include" \
- 		SUBDIRS="$(GPIB_ABS_MODULE_SUBDIR)"
- 
diff --git a/sci-libs/linux-gpib/files/linux-gpib-4.0.4_rc2-kernel-4.11.0.patch b/sci-libs/linux-gpib/files/linux-gpib-4.0.4_rc2-kernel-4.11.0.patch
deleted file mode 100644
index c3a9764924c2..000000000000
--- a/sci-libs/linux-gpib/files/linux-gpib-4.0.4_rc2-kernel-4.11.0.patch
+++ /dev/null
@@ -1,10 +0,0 @@
---- linux-gpib-4.0.4rc2.orig/drivers/gpib/lpvo_usb_gpib/lpvo_usb_gpib.c 2016-06-22 09:48:47.000000000 +0100
-+++ linux-gpib-4.0.4rc2/drivers/gpib/lpvo_usb_gpib/lpvo_usb_gpib.c  2017-05-02 00:59:04.509950834 +0100
-@@ -37,6 +37,7 @@
- #include <linux/file.h>
- #include <linux/timer.h>
- #include <linux/delay.h>
-+#include <linux/sched/signal.h>
- #include <asm/uaccess.h>
-
- #include "gpibP.h"
diff --git a/sci-libs/linux-gpib/linux-gpib-4.1.0.ebuild b/sci-libs/linux-gpib/linux-gpib-4.1.0.ebuild
deleted file mode 100644
index eb8b21c8f17b..000000000000
--- a/sci-libs/linux-gpib/linux-gpib-4.1.0.ebuild
+++ /dev/null
@@ -1,216 +0,0 @@
-# Copyright 1999-2020 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=6
-
-PYTHON_COMPAT=( python2_7 )
-
-inherit linux-info readme.gentoo-r1 versionator eutils linux-mod autotools perl-functions python-single-r1 toolchain-funcs udev user
-
-MY_PV=${PV/_/}
-
-DESCRIPTION="Kernel module and driver library for GPIB (IEEE 488.2) hardware"
-HOMEPAGE="https://linux-gpib.sourceforge.io/"
-SRC_URI="mirror://sourceforge/linux-gpib/${PN}-${MY_PV}.tar.gz
-	firmware? ( https://linux-gpib.sourceforge.io/firmware/gpib_firmware-2006-11-12.tar.gz )
-"
-
-LICENSE="GPL-2"
-SLOT="0"
-KEYWORDS="amd64 ~arm ~x86"
-IUSE="isa pcmcia static debug guile perl php python tcl doc firmware"
-
-COMMONDEPEND="
-	sys-libs/readline:=
-	tcl? ( dev-lang/tcl:0= )
-	guile? ( dev-scheme/guile:12 )
-	perl? ( dev-lang/perl:= )
-	php? ( dev-lang/php:= )
-	python? ( ${PYTHON_DEPS} )
-	firmware? ( sys-apps/fxload )"
-RDEPEND="${COMMONDEPEND}"
-DEPEND="${COMMONDEPEND}
-	virtual/pkgconfig
-	doc? ( app-text/docbook-sgml-utils )
-	perl? ( virtual/perl-ExtUtils-MakeMaker )"
-
-REQUIRED_USE="python? ( ${PYTHON_REQUIRED_USE} )"
-
-PATCHES=(
-	"${FILESDIR}"/${PN}-3.2.21-build.patch
-	"${FILESDIR}"/${PN}-3.2.16-perl.patch
-	"${FILESDIR}"/${PN}-4.0.3-reallydie.patch
-)
-
-S=${WORKDIR}/${PN}-${MY_PV}
-
-pkg_setup() {
-	use perl && perl_set_version
-	use python && python_setup
-
-	linux-mod_pkg_setup
-
-	if kernel_is -lt 2 6 8; then
-		die "Kernel versions older than 2.6.8 are not supported."
-	fi
-
-	# https://sourceforge.net/p/linux-gpib/bugs/43/
-	if use pcmcia && kernel_is -ge 2 6 38; then
-		die "pcmcia support is broken on kernels newer 2.6.38"
-	fi
-}
-
-src_prepare() {
-	default
-	kernel_is ge 4 11 0 && eapply "${FILESDIR}"/${PN}-4.0.4_rc2-kernel-4.11.0.patch
-	eautoreconf
-}
-
-src_configure() {
-	set_arch_to_kernel
-	econf \
-		$(use_enable isa) \
-		$(use_enable pcmcia) \
-		$(use_enable static) \
-		$(use_enable debug driver-debug) \
-		$(use_enable guile guile-binding) \
-		$(use_enable perl perl-binding) \
-		$(use_enable php php-binding) \
-		$(use_enable python python-binding) \
-		$(use_enable tcl tcl-binding) \
-		$(use_enable doc documentation) \
-		--with-linux-srcdir=${KV_DIR}
-}
-
-src_compile() {
-	set_arch_to_kernel
-	FIRM_DIR=/usr/share/usb
-	emake \
-		DESTDIR="${D}" \
-		INSTALL_MOD_PATH="${D}" \
-		HOTPLUG_USB_CONF_DIR="${D}"/etc/hotplug/usb \
-		UDEV_RULES_DIR="${D}$(get_udevdir)"/rules.d \
-		USB_FIRMWARE_DIR="${D}"${FIRM_DIR} \
-		docdir=/usr/share/doc/${PF}/html
-}
-
-src_install() {
-	set_arch_to_kernel
-	FIRM_DIR=/usr/share/usb
-	emake \
-		DESTDIR="${D}" \
-		INSTALL_MOD_PATH="${D}" \
-		HOTPLUG_USB_CONF_DIR="${D}"/etc/hotplug/usb \
-		UDEV_RULES_DIR="${D}/$(get_udevdir)"/rules.d \
-		USB_FIRMWARE_DIR="${D}"${FIRM_DIR} \
-		docdir=/usr/share/doc/${PF}/html install
-
-	if use perl; then
-		einfo "Installing perl module"
-		cd "${S}"/language/perl || die
-		DESTDIR=${D} emake install
-		perl_fix_packlist
-		perl_delete_emptybsdir
-		cd "${S}" || die
-	fi
-
-	echo "KERNEL==\"gpib[0-9]*\",	MODE=\"0660\", GROUP=\"gpib\"" >> 99-gpib.rules
-	udev_dorules 99-gpib.rules
-
-	dodoc doc/linux-gpib.pdf ChangeLog AUTHORS README* NEWS
-
-	insinto /etc
-	newins util/templates/gpib.conf gpib.conf
-	newins util/templates/gpib.conf gpib.conf.example
-
-	if use pcmcia; then
-		dodir /etc/pcmcia
-		insinto /etc/pcmcia
-		doins "${S}"/etc/pcmcia/*
-	fi
-
-	if use firmware; then
-		insinto "${FIRM_DIR}"/agilent_82357a
-		doins "${WORKDIR}"/gpib_firmware-2006-11-12/agilent_82357a/*
-
-		insinto "${FIRM_DIR}"/ni_gpib_usb_b
-		doins "${WORKDIR}"/gpib_firmware-2006-11-12/ni_gpib_usb_b/*
-
-		insinto /usr/share/linux-gpib/hp_82341
-		# do not install precompiled generate_firmware
-		doins "${WORKDIR}"/gpib_firmware-2006-11-12/hp_82341/{*.bin,README}
-	fi
-
-	# fix rules files
-	local f
-	find "${D}$(get_udevdir)"/rules.d -type f -print0 | while read -rd '' f ; do
-		grep -q "${D}" "${f}" && einfo "File ${f} contains a temporary path, fixing."
-		sed -i -e "s:${D}:/:g" "${f}"
-	done
-
-	DOC_CONTENTS="
-You need to run the 'gpib_config' utility to setup the driver before
-you can use it. In order to do it automatically you can add to your
-start script something like this (supposing the appropriate driver
-is loaded on the startup):
-\n
-		gpib_config --minor 0
-\n
-To give a user access to the computer's gpib board you will have to add
-them to the group 'gpib' or, you could change the permissions on the device
-files /dev/gpib[0-15] to something you like better, using 'chmod'
-\n
-Edit /etc/gpib.conf to match your interface board, and any devices you wish
-to open via ibfind().  See the documentation in /usr/share/linux-gpib/html for
-more information.
-\n
-"
-
-	if use pcmcia; then
-		DOC_CONTENTS+='
-For PCMCIA cards:\n
-All files needed for a PCMCIA board were copied to /etc/pcmcia.
-You may wish to edit the options passed to the gpib_config call in the
-/etc/pcmcia/linux-gpib-pcmcia script.
-You may need to send a SIGHUP signal to the cardmgr daemon to force it
-to reload the files in /etc/pcmcia \(alternatively you could use your
-pcmcia init.d script to restart the cardmgr, or you could just reboot\).
-The driver module will be loaded as needed by the cardmgr.
-
-'
-	fi
-
-	if use firmware; then
-		DOC_CONTENTS+='
-For Agilent \(HP\) 82341C and 82341D cards:
-The firmware for these boards is uploaded by passing the appropriate
-firmware file from /usr/share/linux-gpib/hp_82341 directory to
-gpib_config using the -I or --init-data command line option. Example:\n
-gpib_config --minor 0 --init-data /usr/share/linux-gpib/hp_82341/hp_82341c_fw.bin
-'
-	fi
-
-	readme.gentoo_create_doc
-}
-
-pkg_preinst() {
-	linux-mod_pkg_preinst
-	use perl && perl_set_version
-	enewgroup gpib
-}
-
-pkg_postinst() {
-	linux-mod_pkg_postinst
-	readme.gentoo_print_elog
-
-	local v
-		for v in ${REPLACING_VERSIONS}; do
-		if ! version_is_at_least 3.2.21-r1 ${v}; then
-			ewarn "sci-libs/linux-gpib-3.2.21-r1 introduces incompatible changes to the kernel"
-			ewarn "interface. You may need to reboot to make sure the newly built driver modules"
-			ewarn "are used (some of the driver modules cannot be unloaded)."
-			ewarn "If you do not do this, every gpib call will just result in an error message."
-			break
-		fi
-	done
-}
diff --git a/sci-libs/linux-gpib/metadata.xml b/sci-libs/linux-gpib/metadata.xml
index 18c6ece75d7b..0943a596eef1 100644
--- a/sci-libs/linux-gpib/metadata.xml
+++ b/sci-libs/linux-gpib/metadata.xml
@@ -11,7 +11,6 @@
   </maintainer>
   <use>
     <flag name="firmware">Install firmware</flag>
-    <flag name="isa">Build ISA kernel modules; from 3.12 on the setting is ignored and the decision based on the kernel configuration</flag>
   </use>
   <upstream>
     <remote-id type="sourceforge">linux-gpib</remote-id>