app-admin/webmin: bump to 1.791, bug #577268

Version bump to 1.791, adds support for honouring cipher order.
Ebuild by maintainer PhobosK.

Gentoo-bug: 577268
Package-Manager: portage-2.2.28
Signed-off-by: Sam Jorna <wraeth@gentoo.org>

3 files changed, 749 insertions, 0 deletions

diff --git a/app-admin/webmin/Manifest b/app-admin/webmin/Manifest
index e5ae1da3bfd5..37464c1317fc 100644
--- a/app-admin/webmin/Manifest
+++ b/app-admin/webmin/Manifest
@@ -2,3 +2,5 @@ DIST webmin-1.770-minimal.tar.gz 2612198 SHA256 e976091dcf0a68dfb02d5633d09da2ce
 DIST webmin-1.770.tar.gz 28441983 SHA256 eb84f1adbb099d0a2e633fbc4ea4838d1ddbcc84135d6a897803fbd0284719ba SHA512 460d9e06379df8d950874906589938077fd0fc70ed12948a685c1386c9995538d92387e252373398319469406b8ef0daab67dabe8c71b2f1961a5d5cb6848a7f WHIRLPOOL 4556f51001d010b66c6af265904b3f634f7bccf1afeb74be6de0824fefb2a5b2a5508d751bfa4abcfd0cb8b670659474ecf4e564505e446ed36a737e4f100dc0
 DIST webmin-1.780-minimal.tar.gz 2624841 SHA256 d4f51fcc448a881d568a32dce1712f4feb1d15bccb05005117179b8a6488e403 SHA512 a0fc61c202d94419f52572a95df23f4dd54c3b0552ce96df356b13b529988cb4be02e5f1165fbd5fbe30921697baac8b229d8d587860e3adabcbe2a4bfb11806 WHIRLPOOL f8b94e16b041cef115cfa7a49fbb34d432f9f96b28959e3f161df9de5805d4a38d7a019479e96ee886dd6f4c21e5884864a69b923ec3b0ac92422c530a95249c
 DIST webmin-1.780.tar.gz 28578888 SHA256 eb2613a4f4525cbbd04435580a843cb2a454bcf2712301105657cc114beda40e SHA512 1d5552fc09e0a42218881d2d028b8e73deadfca36022a6212e540e8dbbd2ff5fe23883fc4d3b4d63abee0a2aee570ce9710e4e1b75c2cc28f70724502d6680d7 WHIRLPOOL 7ef76b9e3f64d01978aa281d7e57db37078bab4ec101faa115f51ebf43bc0823d8a8bfa925dff5d1a39b0b9aabdada2218d543b14d3961b1346de05c46137d4b
+DIST webmin-1.791-minimal.tar.gz 2635024 SHA256 d269fcccf0034edff44654fb40b83f63e3274f722a8f0d5b14f1fa9f74f49b00 SHA512 e8e7b43865399e918ef017d4d710b21cc7ce2f6566056faa82d756be29f038e07a20055978531f8785639c78339970fbfeabd4a4aa1fa4b331f3a344a78954d2 WHIRLPOOL e8380478edf6b994e03623a9a6b84f736a6c5efd1dbe0aac3905f85457d172a783af0231d4b3606d69c63129c4c4d3d80fa10608dd47374a01f45be7fd53b281
+DIST webmin-1.791.tar.gz 28800013 SHA256 e62148a2263c016a66e7c825c5cb124614268c1da1e0f0bee75cd060c3acfa9c SHA512 4ba19f057ee70bc0a283753a6c190bbae15f0e2af1650ef1656c7b94e07a6750203ef3b7190f7abd544b25988446df6b174bf06191426893bd4224e54451e771 WHIRLPOOL 2d739e1c3ba06b04086b7d20eb646f950aa8776b4fc41bc975cb160733e70a5c7a4de6f331c294bf168e3f8fd5009c72d617eab662078f6d901087b3cfc2db36
diff --git a/app-admin/webmin/files/gentoo-setup-1.791 b/app-admin/webmin/files/gentoo-setup-1.791
new file mode 100644
index 000000000000..680dfbb5303b
--- /dev/null
+++ b/app-admin/webmin/files/gentoo-setup-1.791
@@ -0,0 +1,438 @@
+#!/bin/sh
+# gentoo-setup.sh
+#
+# Version 1.2
+#
+# A modified original Webmin setup.sh script to comply with Gentoo specifics
+#
+# Modification done by: PhobosK <phobosk@kbfx.net>
+#
+# This script runs after the webmin archive is installed, and in the pkg_config() phase.
+# It does setup the various config files of Webmin depending on if it is
+# a new install, an upgrade or a reset.
+
+LANG=
+export LANG
+
+if [ -z ${wadir} ]; then
+	echo "You can't run this script outside of the 'emerge --config app-admin/webmin' command."
+	exit 1
+fi
+
+# All things we do is from the Webmin install dir - $wadir
+cd $wadir
+
+
+# Are we hard resetting everything?
+# If yes, we do:
+# 1. Run the specific Webmin $wadir/run-uninstalls.pl
+#	 It runs all uninstall.pl files in every module's folder.
+#	 They delete all the set specific Webmin cron jobs.
+#	 If bumping you should go through these files using the command:
+#	 find . -name uninstall.pl -exec cat {} \; -print
+# 2. Delete the whole /etc/webmin content, keeping only the gentoo .keep_* files
+if [ "$reset" = "hard" ]; then
+	echo "Running Webmin's specific uninstall procedures.. (Please ignore any possible errors)"
+	(WEBMIN_CONFIG=$config_dir WEBMIN_VAR=$var_dir LANG= "$wadir/run-uninstalls.pl")
+	echo "..done"
+	echo ""
+
+	echo "Deleting the content of user's config folder: $config_dir .."
+	find $config_dir ! -name '.keep_*' -delete 2>/dev/null
+	echo "..done"
+	echo ""
+fi
+
+
+# Are we soft resetting?
+# If yes we do:
+# - Delete the $config_dir/config file so we get new config values
+if [ "$reset" = "soft" ]; then
+	echo "Deleting the user's $config_dir/config file.."
+	if [ -f "$config_dir/config" ]; then
+		rm -f "$config_dir/config"
+	fi
+	echo "..done"
+	echo ""
+fi
+
+
+# Get all available modules of this version
+allmods=`echo */module.info | sed -e 's/\/module.info//g'`
+
+# Get current Webmin version
+ver=`cat "$wadir/version"`
+
+if [ -r "$config_dir/config" ]; then
+	upgrading=1
+fi
+
+
+# Check if upgrading from an old version
+if [ "$upgrading" = 1 ]; then
+	echo "Updating existant Webmin's config files.."
+
+	# Get current var path
+	if [ -r "$config_dir/var-path" ]; then
+		_var_dir=`cat $config_dir/var-path`
+		if [ -n ${_var_dir} ]; then
+			var_dir=${_var_dir}
+		fi
+	fi
+
+	# Get current perl path
+	if [ -r "$config_dir/perl-path" ]; then
+		_perl=`cat $config_dir/perl-path`
+		if [ -n ${_perl} ]; then
+			perl=${_perl}
+		fi
+	fi
+
+	# Get old os name and version
+	os_type=`grep "^os_type=" $config_dir/config | sed -e 's/os_type=//g'`
+	os_version=`grep "^os_version=" $config_dir/config | sed -e 's/os_version=//g'`
+	real_os_type=`grep "^real_os_type=" $config_dir/config | sed -e 's/real_os_type=//g'`
+	real_os_version=`grep "^real_os_version=" $config_dir/config | sed -e 's/real_os_version=//g'`
+
+	# Get port, ssl, no_ssl2, no_ssl3, ssl_redirect, no_sslcompression, ssl_honorcipherorder, no_tls1, no_tls1_1 and keyfile
+	port=`grep "^port=" $config_dir/miniserv.conf | sed -e 's/port=//g'`
+	ssl=`grep "^ssl=" $config_dir/miniserv.conf | sed -e 's/ssl=//g'`
+	no_ssl2=`grep "^no_ssl2=" $config_dir/miniserv.conf | sed -e 's/no_ssl2=//g'`
+	no_ssl3=`grep "^no_ssl3=" $config_dir/miniserv.conf | sed -e 's/no_ssl3=//g'`
+	ssl_redirect=`grep "^ssl_redirect=" $config_dir/miniserv.conf | sed -e 's/ssl_redirect=//g'`
+	ssl_honorcipherorder=`grep "^ssl_honorcipherorder=" $config_dir/miniserv.conf | sed -e 's/ssl_honorcipherorder=//g'`
+	no_sslcompression=`grep "^no_sslcompression=" $config_dir/miniserv.conf | sed -e 's/no_sslcompression=//g'`
+	no_tls1=`grep "^no_tls1=" $config_dir/miniserv.conf | sed -e 's/no_tls1=//g'`
+	no_tls1_1=`grep "^no_tls1_1=" $config_dir/miniserv.conf | sed -e 's/no_tls1_1=//g'`
+	keyfile=`grep "^keyfile=" $config_dir/miniserv.conf | sed -e 's/keyfile=//g'`
+
+	# Update ACLs
+	$perl "$wadir/newmods.pl" $config_dir $allmods
+
+	# Update miniserv.conf with new root directory, mime types file and server info
+	grep -v "^root=" $config_dir/miniserv.conf | grep -v "^mimetypes=" | grep -v "^server=" >$tempdir/$$.miniserv.conf
+	mv $tempdir/$$.miniserv.conf $config_dir/miniserv.conf
+	echo "root=$wadir" >> $config_dir/miniserv.conf
+	echo "mimetypes=$wadir/mime.types" >> $config_dir/miniserv.conf
+	echo "server=MiniServ/$ver" >> $config_dir/miniserv.conf
+	grep logout= $config_dir/miniserv.conf >/dev/null
+	if [ $? != "0" ]; then
+		echo "logout=$config_dir/logout-flag" >> $config_dir/miniserv.conf
+	fi
+
+	# Remove old cache of module infos
+	rm -f $config_dir/module.infos.cache
+	echo "..done"
+	echo ""
+else
+	# Create webserver's new config files
+	echo "Creating Webmin's new config files.."
+
+	echo $perl > $config_dir/perl-path
+	echo $var_dir > $config_dir/var-path
+
+	# Create a totally new conf file
+	cfile=$config_dir/miniserv.conf
+	echo "port=$port" > $cfile
+	echo "root=$wadir" >> $cfile
+	echo "mimetypes=$wadir/mime.types" >> $cfile
+	echo "addtype_cgi=internal/cgi" >> $cfile
+	echo "realm=Webmin Server" >> $cfile
+	echo "logfile=$var_dir/miniserv.log" >> $cfile
+	echo "errorlog=$var_dir/miniserv.error" >> $cfile
+	echo "pidfile=$pidfile" >> $cfile
+	echo "logtime=168" >> $cfile
+	echo "ppath=$ppath" >> $cfile
+	echo "ssl=$ssl" >> $cfile
+	echo "no_ssl2=$no_ssl2" >> $cfile
+	echo "no_ssl3=$no_ssl3" >> $cfile
+	echo "ssl_redirect=$ssl_redirect" >> $cfile
+	echo "ssl_honorcipherorder=$ssl_honorcipherorder" >> $cfile
+	echo "no_sslcompression=$no_sslcompression" >> $cfile
+	echo "no_tls1=$no_tls1" >> $cfile
+	echo "no_tls1_1=$no_tls1_1" >> $cfile
+	echo "keyfile=$keyfile" >> $cfile
+	echo "env_WEBMIN_CONFIG=$config_dir" >> $cfile
+	echo "env_WEBMIN_VAR=$var_dir" >> $cfile
+	echo "atboot=$atboot" >> $cfile
+	echo "logout=$config_dir/logout-flag" >> $cfile
+	echo "listen=10000" >> $cfile
+	echo "denyfile=\\.pl\$" >> $cfile
+	echo "log=1" >> $cfile
+	echo "blockhost_failures=5" >> $cfile
+	echo "blockhost_time=60" >> $cfile
+	echo "syslog=1" >> $cfile
+	echo "session=1" >> $cfile
+	echo "premodules=WebminCore" >> $cfile
+	echo "server=MiniServ/$ver" >> $cfile
+
+	# Append package-specific info to config file.
+	# miniserv-conf can be created by upstream or by us in src_install phase (see there).
+	if [ -f "$wadir/miniserv-conf" ]; then
+		cat "$wadir/miniserv-conf" >>$cfile
+	fi
+
+	# Create the default user allowed to login - root only
+	login="root"
+
+	if [ -r /etc/shadow ]; then
+		#crypt=`grep "^root:" /etc/shadow | cut -f 2 -d :`
+		crypt=x
+	else
+		crypt=`grep "^root:" /etc/passwd | cut -f 2 -d :`
+	fi
+
+	ufile=$config_dir/miniserv.users
+	echo "$login:$crypt:0" > $ufile
+	chmod 600 $ufile
+
+
+	echo "userfile=$ufile" >> $cfile
+	chmod 600 $cfile
+	echo "..done"
+	echo ""
+
+	echo "Creating access control file.."
+	afile=$config_dir/webmin.acl
+	echo "$login: $allmods" > $afile
+	chmod 600 $afile
+	echo "..done"
+	echo ""
+fi
+
+
+# Create start, stop, restart and reload Gentoo compliant Webmin scripts
+# We use sys-apps/openrc functions which is already pulled by sys-apps/baselayout
+# or systemctl if we run under systemd
+echo "Creating start and stop scripts.."
+rm -f $config_dir/{start,stop,restart,reload}
+
+# The start script in /etc/webmin (Gentoo compliant)
+cat <<END >>"$config_dir/start"
+#!/bin/sh
+
+if [ ! -f "${pidfile}" ]; then
+	if [[ -d /run/systemd/system ]] ; then
+		systemctl start webmin.service
+	else
+		rc-service --ifexists -- webmin start
+	fi
+fi
+END
+
+# The stop script in /etc/webmin (Gentoo compliant)
+cat <<END >>"$config_dir/stop"
+#!/bin/sh
+
+if [[ -d /run/systemd/system ]] ; then
+	systemctl stop webmin.service
+else
+	rc-service --ifexists -- webmin --ifstarted stop
+fi
+END
+
+# The restart script in /etc/webmin (Gentoo compliant)
+cat <<END >>"$config_dir/restart"
+#!/bin/sh
+
+if [[ -d /run/systemd/system ]] ; then
+	systemctl try-restart webmin.service
+else
+	rc-service --ifexists -- webmin --ifstarted restart
+fi
+END
+
+# The reload script in /etc/webmin (Gentoo compliant)
+cat <<END >>"$config_dir/reload"
+#!/bin/sh
+
+if [[ -d /run/systemd/system ]] ; then
+	systemctl reload-or-try-restart webmin.service
+else
+	rc-service --ifexists -- webmin --ifstarted reload
+fi
+END
+
+chmod 755 $config_dir/{start,stop,restart,reload}
+echo "..done"
+echo ""
+
+
+if [ "$upgrading" = 1 ]; then
+	echo "Updating other config files.."
+else
+	echo "Copying other config files.."
+fi
+
+# This just copies and merges the Webmin's release config files, with user's in the /etc/webmin folder
+newmods=`$perl "$wadir/copyconfig.pl" "$os_type/$real_os_type" "$os_version/$real_os_version" "$wadir" $config_dir "" $allmods`
+if [ "$upgrading" != 1 ]; then
+	# Store the OS and version
+	echo "os_type=$os_type" >> $config_dir/config
+	echo "os_version=$os_version" >> $config_dir/config
+	echo "real_os_type=$real_os_type" >> $config_dir/config
+	echo "real_os_version=$real_os_version" >> $config_dir/config
+
+	# Turn on logging by default
+	echo "log=1" >> $config_dir/config
+
+	# Disallow unknown referers by default
+	echo "referers_none=1" >>$config_dir/config
+else
+	# one-off hack to set log variable in config from miniserv.conf
+	grep log= $config_dir/config >/dev/null
+	if [ "$?" = "1" ]; then
+		grep log= $config_dir/miniserv.conf >> $config_dir/config
+		grep logtime= $config_dir/miniserv.conf >> $config_dir/config
+		grep logclear= $config_dir/miniserv.conf >> $config_dir/config
+	fi
+
+	# Disallow unknown referers if not set
+	grep referers_none= $config_dir/config >/dev/null
+	if [ "$?" != "0" ]; then
+		echo "referers_none=1" >>$config_dir/config
+	fi
+fi
+echo $ver > $config_dir/version
+echo "..done"
+echo ""
+
+# Set passwd_ fields in miniserv.conf from global config
+for field in passwd_file passwd_uindex passwd_pindex passwd_cindex passwd_mindex; do
+	grep $field= $config_dir/miniserv.conf >/dev/null
+	if [ "$?" != "0" ]; then
+		grep $field= $config_dir/config >> $config_dir/miniserv.conf
+	fi
+done
+grep passwd_mode= $config_dir/miniserv.conf >/dev/null
+if [ "$?" != "0" ]; then
+	echo passwd_mode=0 >> $config_dir/miniserv.conf
+fi
+
+grep ssl_honorcipherorder= $config_dir/miniserv.conf >/dev/null
+if [ "$?" != "0" ]; then
+	echo ssl_honorcipherorder=1 >> $config_dir/miniserv.conf
+fi
+
+# Disable SSL compression to defeat BEAST attack
+grep no_sslcompression= $config_dir/miniserv.conf >/dev/null
+if [ "$?" != "0" ]; then
+	echo no_sslcompression=1 >> $config_dir/miniserv.conf
+fi
+
+# Tighten SSL security
+grep no_ssl2= $config_dir/miniserv.conf >/dev/null
+if [ "$?" != "0" ]; then
+	echo no_ssl2=1 >> $config_dir/miniserv.conf
+fi
+
+grep no_ssl3= $config_dir/miniserv.conf >/dev/null
+if [ "$?" != "0" ]; then
+	echo no_ssl3=1 >> $config_dir/miniserv.conf
+fi
+
+grep no_tls1= $config_dir/miniserv.conf >/dev/null
+if [ "$?" != "0" ]; then
+    echo no_tls1=1 >> $config_dir/miniserv.conf
+fi
+
+grep no_tls1_1= $config_dir/miniserv.conf >/dev/null
+if [ "$?" != "0" ]; then
+    echo no_tls1_1=1 >> $config_dir/miniserv.conf
+fi
+
+# Make Perl crypt MD5 the default
+grep md5pass= $config_dir/config >/dev/null
+if [ "$?" != "0" ]; then
+	echo md5pass=1 >> $config_dir/config
+fi
+
+# Set a special theme if none was set before
+if [ "$theme" = "" ]; then
+	theme=`cat "$wadir/defaulttheme" 2>/dev/null`
+fi
+oldthemeline=`grep "^theme=" $config_dir/config`
+oldtheme=`echo $oldthemeline | sed -e 's/theme=//g'`
+if [ "$theme" != "" ] && [ "$oldthemeline" = "" ] && [ -d "$wadir/$theme" ]; then
+	themelist=$theme
+fi
+
+# Set a special overlay if none was set before
+if [ "$overlay" = "" ]; then
+	overlay=`cat "$wadir/defaultoverlay" 2>/dev/null`
+fi
+if [ "$overlay" != "" ] && [ "$theme" != "" ] && [ -d "$wadir/$overlay" ]; then
+	themelist="$themelist $overlay"
+fi
+
+# Apply the theme and maybe overlay
+if [ "$themelist" != "" ]; then
+	echo "theme=$themelist" >> $config_dir/config
+	echo "preroot=$themelist" >> $config_dir/miniserv.conf
+fi
+
+# If the old blue-theme is still in use, change it (new in 1.730)
+oldtheme=`grep "^theme=" $config_dir/config | sed -e 's/theme=//g'`
+if [ "$oldtheme" = "blue-theme" ]; then
+   sed -i -e 's/theme=blue-theme/theme=gray-theme/g' $config_dir/config
+   sed -i -e 's/preroot=blue-theme/preroot=gray-theme/g' $config_dir/miniserv.conf
+fi
+
+# Set the product field in the global config
+grep product= $config_dir/config >/dev/null
+if [ "$?" != "0" ]; then
+	echo product=webmin >> $config_dir/config
+fi
+
+# If password delays are not specifically disabled, enable them
+grep passdelay= $config_dir/miniserv.conf >/dev/null
+if [ "$?" != "0" ]; then
+	echo passdelay=1 >> $config_dir/miniserv.conf
+fi
+
+
+echo "Changing ownership and permissions.."
+# Make all config dirs non-world-readable
+for m in $newmods; do
+	chown -R root:root $config_dir/$m
+	chmod -R og-rw $config_dir/$m
+done
+
+# Make miniserv config files non-world-readable
+for f in miniserv.conf miniserv.users; do
+	chown -R root:root $config_dir/$f
+	chmod -R og-rw $config_dir/$f
+done
+chmod +r $config_dir/version
+
+# Fix up bad permissions from some older installs
+for m in ldap-client ldap-server ldap-useradmin mailboxes mysql postgresql servers virtual-server; do
+	if [ -d "$config_dir/$m" ]; then
+		chown root:root $config_dir/$m
+		chmod og-rw $config_dir/$m
+		chmod og-rw $config_dir/$m/config 2>/dev/null
+	fi
+done
+echo "..done"
+echo ""
+
+
+# This executes all postinstall.pl for every module
+# If you do bump, you should look at the specific changes they do with this command in root folder:
+# find . -name postinstall.pl -exec cat {} \; -print
+# Generally they are safe to run 'cause they change only user's config in /etc/webmin
+# or setup some cron jobs
+if [ "$nopostinstall" = "" ]; then
+	echo "Running postinstall scripts.. (Please ignore any possible errors)"
+	(cd "$wadir" ; WEBMIN_CONFIG=$config_dir WEBMIN_VAR=$var_dir "$wadir/run-postinstalls.pl")
+	echo "..done"
+	echo ""
+fi
+
+# Enable background collection
+if [ "$upgrading" != 1 -a -r $config_dir/system-status/enable-collection.pl ]; then
+	echo "Enabling background status collection.. (Please ignore any possible errors)"
+	$config_dir/system-status/enable-collection.pl 5
+	echo "..done"
+	echo ""
+fi
diff --git a/app-admin/webmin/webmin-1.791.ebuild b/app-admin/webmin/webmin-1.791.ebuild
new file mode 100644
index 000000000000..8e25d1b8e6c7
--- /dev/null
+++ b/app-admin/webmin/webmin-1.791.ebuild
@@ -0,0 +1,309 @@
+# Copyright 1999-2016 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Id$
+
+EAPI="5"
+
+inherit eutils pam ssl-cert systemd
+
+DESCRIPTION="A web-based Unix systems administration interface"
+HOMEPAGE="http://www.webmin.com/"
+SRC_URI="minimal? ( mirror://sourceforge/webadmin/${P}-minimal.tar.gz )
+	!minimal? ( mirror://sourceforge/webadmin/${P}.tar.gz )"
+
+LICENSE="BSD GPL-2"
+SLOT="0"
+
+KEYWORDS="~amd64 ~x86"
+
+# NOTE: The ssl flag auto added by ssl-cert eclass is not used actually
+# because openssl is forced by dev-perl/Net-SSLeay
+IUSE="minimal +ssl mysql postgres ldap"
+REQUIRED_USE="minimal? ( !mysql !postgres !ldap )"
+
+# All the required perl modules can be found easily using (in Webmin's root src dir):
+# find . -name cpan_modules.pl -exec grep "::" {} \;
+# NOTE: If Webmin doesn't find the required perl modules, it offers(runtime) the user
+# to install them using the in-built cpan module, and this will mess up perl on the system
+# That's why some modules are forced without a use flag
+# NOTE: pam, ssl and dnssec-tools deps are forced for security and Gentoo compliance installation reasons
+DEPEND="virtual/perl-MIME-Base64
+	virtual/perl-Socket
+	virtual/perl-Sys-Syslog
+	virtual/perl-Time-HiRes
+	virtual/perl-Time-Local
+	dev-perl/Authen-Libwrap
+	dev-perl/IO-Tty
+	dev-perl/MD5
+	dev-perl/Net-SSLeay
+	dev-perl/Authen-PAM
+	dev-perl/Sys-Hostname-Long
+	>=net-dns/dnssec-tools-1.13
+	!minimal? (
+		mysql? ( dev-perl/DBD-mysql )
+		postgres? ( dev-perl/DBD-Pg )
+		ldap? ( dev-perl/perl-ldap )
+		dev-perl/XML-Generator
+		dev-perl/XML-Parser
+	)"
+RDEPEND="${DEPEND}"
+
+src_prepare() {
+	local perl="$( which perl )"
+
+	# Remove the unnecessary and incompatible files
+	rm -rf acl/Authen-SolarisRBAC-0.1*
+	if ! use minimal ; then
+		rm -rf {format,{bsd,hpux,sgi}exports,zones,rbac}
+		rm -f mount/{free,net,open}bsd-mounts*
+		rm -f mount/macos-mounts*
+	fi
+
+	# For security reasons remove the SSL certificate that comes with Webmin
+	# We will create our own later
+	rm -f miniserv.pem
+
+	# Remove the Webmin setup scripts to avoid Webmin in runtime to mess up config
+	# We will use our own later
+	rm -f setup.{sh,pl}
+
+	# Set the installation type/mode to Gentoo
+	echo "gentoo" > install-type
+
+	# Fix the permissions of the install files
+	chmod -R og-w "${S}"
+
+	# Since we should not modify any files after install
+	# we set the perl path in all cgi and pl files here using Webmin's routines
+	# The pl file is Prefix safe and works only on provided input, no other filesystem files
+	ebegin "Fixing perl path in source files"
+	(find "${S}" -name '*.cgi' -print ; find "${S}" -name '*.pl' -print) | $perl "${S}"/perlpath.pl $perl -
+	eend $?
+}
+
+src_install() {
+	# Create config dir and keep
+	diropts -m0755
+	dodir /etc/webmin
+	keepdir /etc/webmin
+
+	# Create install dir
+	# Third party modules installed through Webmin go here too, so keep
+	dodir /usr/libexec/webmin
+	keepdir /usr/libexec/webmin
+
+	# Copy our own setup script to installation folder
+	insinto /usr/libexec/webmin
+	newins "${FILESDIR}"/gentoo-setup-${PV} gentoo-setup.sh
+	fperms 0744 /usr/libexec/webmin/gentoo-setup.sh
+
+	# This is here if we ever want in future ebuilds to add some specific
+	# config values in the /etc/webmin/miniserv.conf
+	# The format of this file should be the same as the one of miniserv.conf:
+	# var=value
+	#
+	# Uncomment it if you use such file. Before that check if upstream
+	# has this file in root dir too.
+	#newins "${FILESDIR}/miniserv-conf" miniserv-conf
+
+	# Create the log dir and keep
+	diropts -m0700
+	dodir /var/log/webmin
+	keepdir /var/log/webmin
+
+	# Create the init.d file and put the neccessary variables there
+	newinitd "${FILESDIR}"/init.d.webmin webmin
+	sed -i \
+		-e "s:%exe%:${EROOT}usr/libexec/webmin/miniserv.pl:" \
+		-e "s:%pid%:${EROOT}var/run/webmin.pid:" \
+		-e "s:%conf%:${EROOT}etc/webmin/miniserv.conf:" \
+		-e "s:%config%:${EROOT}etc/webmin/config:" \
+		-e "s:%perllib%:${EROOT}usr/libexec/webmin:" \
+		"${ED}etc/init.d/webmin" \
+		|| die "Failed to patch the webmin init file"
+
+	# Create the systemd service file and put the neccessary variables there
+	systemd_newunit "${FILESDIR}"/webmin.service webmin.service
+	sed -i \
+		-e "s:%exe%:${EROOT}usr/libexec/webmin/miniserv.pl:" \
+		-e "s:%pid%:${EROOT}var/run/webmin.pid:" \
+		-e "s:%conf%:${EROOT}etc/webmin/miniserv.conf:" \
+		-e "s:%config%:${EROOT}etc/webmin/config:" \
+		-e "s:%perllib%:${EROOT}usr/libexec/webmin:" \
+		"${ED}$(_systemd_get_systemunitdir)/webmin.service" \
+		|| die "Failed to patch the webmin systemd service file"
+
+	# Setup pam
+	pamd_mimic system-auth webmin auth account session
+
+	# Copy files to installation folder
+	ebegin "Copying install files to destination"
+	cp -pPR "${S}"/* "${ED}usr/libexec/webmin"
+	eend $?
+}
+
+pkg_preinst() {
+	# First stop service if running so Webmin to not messup our config
+	ebegin "Stopping any running Webmin instance prior merging"
+	if systemd_is_booted ; then
+		systemctl stop webmin.service 2>/dev/null
+	else
+		rc-service --ifexists -- webmin --ifstarted stop
+	fi
+	eend $?
+}
+
+pkg_postinst() {
+	# Run pkg_config phase first - non interactively
+	export INTERACTIVE="no"
+	pkg_config
+	# Every next time pkg_config should be interactive
+	INTERACTIVE="yes"
+
+	ewarn
+	ewarn "Bare in mind that not all Webmin modules are Gentoo tweaked and may have some issues."
+	ewarn "Always be careful when using modules that modify init entries, do update of webmin, install CPAN modules etc."
+	ewarn "To avoid problems, please before using any module, look at its configuration options first."
+	ewarn "(Usually there is a link at top in the right pane of Webmin for configuring the module.)"
+	ewarn
+	if systemd_is_booted ; then
+		elog "- To make Webmin start at boot time, run: 'systemctl enable webmin.service'"
+	else
+		elog "- To make Webmin start at boot time, run: 'rc-update add webmin default'"
+	fi
+	elog "- The default URL to connect to Webmin is: https://localhost:10000"
+	elog "- The default user that can login is: root"
+	elog "- To reconfigure Webmin in case of problems run 'emerge --config app-admin/webmin'"
+}
+
+pkg_prerm() {
+	# First stop service if running - we do not want Webmin to mess up config
+	ebegin "Stopping any running Webmin instance prior unmerging"
+	if systemd_is_booted ; then
+		systemctl stop webmin.service 2>/dev/null
+	else
+		rc-service --ifexists -- webmin --ifstarted stop
+	fi
+	eend $?
+}
+
+pkg_postrm() {
+	# If removing webmin completely, remind the user for the Webmin's own cron jobs.
+	if [[ ! ${REPLACED_BY_VERSION} ]]; then
+		ewarn
+		ewarn "You have uninstalled Webmin, so have in mind that all cron jobs scheduled"
+		ewarn "by Webmin for its own modules, are left active and they will fail when Webmin is missing."
+		ewarn "To fix this just disable them if you intend to use Webmin again,"
+		ewarn "OR delete them if not."
+		ewarn
+	fi
+}
+
+pkg_config(){
+	# First stop service if running
+	ebegin "Stopping any running Webmin instance"
+	if systemd_is_booted ; then
+		systemctl stop webmin.service 2>/dev/null
+	else
+		rc-service --ifexists -- webmin --ifstarted stop
+	fi
+	eend $?
+
+	# Next set the default reset variable to 'none'
+	# reset/_reset can be:
+	# 'none' - does not reset anything, just upgrades if a conf is present
+	#		   OR installs new conf if a conf is missing
+	# 'soft' - deletes only $config_dir/config file and thus resetting most
+	#		  conf values to their defaults. Keeps the specific Webmin cron jobs
+	# 'hard' - deletes all files in $config_dir (keeping the .keep_* Gentoo file)
+	#		  and thus resetting all Webmin. Deletes the specific Webmin cron jobs too.
+	local _reset="none"
+
+	# If in interactive mode ask user what should we do
+	if [[ "${INTERACTIVE}" = "yes" ]]; then
+		einfo
+		einfo "Please enter the number of the action you would like to perform?"
+		einfo
+		einfo "1. Update configuration"
+		einfo "   (keeps old config options and adds the new ones)"
+		einfo "2. Soft reset configuration"
+		einfo "   (keeps some old config options, the other options are set to default)"
+		ewarn "   All Webmin users will be reset"
+		einfo "3. Hard reset configuration"
+		einfo "   (all options including module options are set to default)"
+		ewarn "   You will lose all Webmin configuration options you have done till now"
+		einfo "4. Exit this configuration utility (default)"
+		while [ "$correct" != "true" ] ; do
+			read answer
+			if [[ "$answer" = "1" ]] ; then
+				_reset="none"
+				correct="true"
+			elif [[ "$answer" = "2" ]] ; then
+				_reset="soft"
+				correct="true"
+			elif  [[ "$answer" = "3" ]] ; then
+				_reset="hard"
+				correct="true"
+			elif  [ "$answer" = "4" -o "$answer" = "" ] ; then
+				die "User aborted configuration."
+			else
+				echo "Answer not recognized. Enter a number from 1 to 4"
+			fi
+		done
+
+		if [[ "$_reset" = "hard" ]]; then
+			while [ "$sure" != "true" ] ; do
+				ewarn "You will lose all Webmin configuration options you have done till now."
+				ewarn "Are you sure you want to do this? (y/n)"
+				read answer
+				if [[ $answer =~ ^[Yy]([Ee][Ss])?$ ]] ; then
+					sure="true"
+				elif [[ $answer =~ ^[Nn]([Oo])?$ ]] ; then
+					die "User aborted configuration."
+				else
+					echo "Answer not recognized. Enter 'y' or 'n'"
+				fi
+			done
+		fi
+	fi
+
+	export reset=$_reset
+
+	# Create ssl certificate for Webmin if there is not one in the proper place
+	if [[ ! -e "${EROOT}etc/ssl/webmin/server.pem" ]]; then
+		SSL_ORGANIZATION="${SSL_ORGANIZATION:-Webmin Server}"
+		SSL_COMMONNAME="${SSL_COMMONNAME:-*}"
+		install_cert "${EROOT}/etc/ssl/webmin/server"
+	fi
+
+	# Ensure all paths passed to the setup script use EROOT
+	export wadir="${EROOT}usr/libexec/webmin"
+	export config_dir="${EROOT}etc/webmin"
+	export var_dir="${EROOT}var/log/webmin"
+	export tempdir="${T}"
+	export pidfile="${EROOT}var/run/webmin.pid"
+	export perl="$( which perl )"
+	export os_type='gentoo-linux'
+	export os_version='*'
+	export real_os_type='Gentoo Linux'
+	export real_os_version='Any version'
+	# Forcing 'ssl', 'no_ssl2', 'no_ssl3', 'ssl_redirect', 'no_sslcompression',
+	# 'ssl_honorcipherorder', 'no_tls1' and 'no_tls1_1' for tightening security
+	export ssl=1
+	export no_ssl2=1
+	export no_ssl3=1
+	export ssl_redirect=1
+	export ssl_honorcipherorder=1
+	export no_sslcompression=1
+	export no_tls1=1
+	export no_tls1_1=1
+	export keyfile="${EROOT}etc/ssl/webmin/server.pem"
+	export port=10000
+
+	export atboot=0
+
+	einfo "Executing Webmin's configure script"
+	$wadir/gentoo-setup.sh
+
+	einfo "Configuration of Webmin done"
+}