diff options
Diffstat (limited to 'media-tv/minisatip/files/minisatip.conf')
| -rw-r--r-- | media-tv/minisatip/files/minisatip.conf | 113 |
1 files changed, 113 insertions, 0 deletions
diff --git a/media-tv/minisatip/files/minisatip.conf b/media-tv/minisatip/files/minisatip.conf new file mode 100644 index 0000000..c8c8b94 --- /dev/null +++ b/media-tv/minisatip/files/minisatip.conf @@ -0,0 +1,113 @@ +#* -a x:y:z simulate x DVB-S2, y DVB-T2 and z DVB-C adapters on this box (0 means auto-detect) +# * eg: -a 1:2:3 +# - it will report 1 dvb-s2 device, 2 dvb-t2 devices and 3 dvb-c devices + +#* -b --buffers X:Y : set the app adapter buffer to X Bytes (default: 25004) and set the kernel DVB buffer to Y Bytes (default: 5775360) - both multiple of 188 +# * eg: -b 18800:18988 + +#* -c X: bandwidth capping for the output to the network [default: unlimited] +# * eg: -c 2048 (does not allow minisatip to send more than 2048KB/s to all remote servers) + +#* -d --diseqc ADAPTER1:COMMITTED1-UNCOMMITTED1[,ADAPTER2:COMMITTED2-UNCOMMITTED2[,...] +# * The first argument is the adapter number, second is the number of committed packets to send to a Diseqc 1.0 switch, third the number of uncommitted commands to sent to a Diseqc 1.1 switch +# The higher number between the committed and uncommitted will be sent first. +# * eg: -d 0:1-0 (which is the default for each adapter). +# - note: * as adapter means apply to all adapters +# - note: * before committed number enables fast-switch (only voltage/tone) + +#* -q --diseqc-timing ADAPTER1:BEFORE_CMD1-AFTER_CMD1-AFTER_REPEATED_CMD1-AFTER_SWITCH1-AFTER_BURST1-AFTER_TONE1[,...] +# * All timing values are in ms, default adapter values are: 15-54-15-15-15-0 +# - note: * as adapter means apply to all adapters + +#* -D --device-id DVC_ID: specify the device id (in case there are multiple SAT>IP servers in the network) +# * eg: -D 4 + +#* -Y --delsys ADAPTER1:DELIVERY_SYSTEM1[,ADAPTER2:DELIVERY_SYSTEM2[,..]] - specify the delivery system of the adapters +# * eg: --delsys 1:dvbt,2:dvbs +# - specifies adapter 1 as a DVBT device, adapter 2 as DVB-S, which overrides the system detection of the adapter + +#* --dmx-source ADAPTER1:FRONTENDX - specifies the frontend number specified as argument for DMX_SET_SOURCE +# * eg: --dmx-source 0:1 - enables DMX_SET_SOURCE ioctl call with parameter 1 for adapter 0 + +#* -e --enable-adapters list_of_enabled adapters: enable only specified adapters +# * eg: -e 0-2,5,7 (no spaces between parameters) +# - keep in mind that the first adapters are the local ones starting with 0 after that are the satip adapters +# if you have 3 local dvb cards 0-2 will be the local adapters, 3,4, ... will be the satip servers specified with argument -s + +#* -f foreground, otherwise run in background + +#* -g use syslog instead stdout for logging, multiple -g - print to stderr as well + +#* -i --priority prio: set the DVR thread priority to prio + +#* -l increases the verbosity (you can use multiple -l), logging to stdout in foreground mode or in /tmp/log when a daemon +# * eg: -l -l -l + +#* -L --lnb specifies the adapter and LNB parameters (low, high and switch frequency) +# * eg: -L *:9750-10600-11700 - sets all the adapters to use Universal LNB parameters (default) +# * eg: -L *:10750-10750-10750 - sets the parameters for Sky NZ LNB using 10750 Mhz +# * eg: -L 0:10750-10750-10750,1:9750-10600-11700 - adapter 0 has a SKY NZ LNB, adapter 1 has an Universal LNB + +#* -m xx: simulate xx as local mac address, generates UUID based on mac +# * eg: -m 001122334455 + +#* -o --dvbapi host:port - specify the hostname and port for the dvbapi server (oscam) +# * eg: -o 192.168.9.9:9000 +# 192.168.9.9 is the host where oscam is running and 9000 is the port configured in dvbapi section in oscam.conf + +#* -p url: specify playlist url using X_SATIPM3U header +# * eg: -p http://192.168.2.3:8080/playlist +# - this will add X_SATIPM3U tag into the satip description xml + +#* -r --remote-rtp remote_rtp_host: send the rtp stream to remote_rtp_host instead of the ip the connection comes from +# * eg: -r 192.168.7.9 + +#* -R --document-root directory: document root for the minisatip web page and images +# default gentoo install /usr/share/doc/minisatip-*/html + +#* -s --satip-servers DELSYS:host:port - specify the remote satip host and port with delivery system DELSYS, it is possible to use multiple -s +# * DELSYS - can be one of: dvbs, dvbs2, dvbt, dvbt2, dvbc, dvbc2, isdbt, atsc, dvbcb ( - DVBC_ANNEX_B ) [default: dvbs2] +# host - the server of the satip server +# port - rtsp port for the satip server [default: 554] +# eg: -s 192.168.1.2 -s dvbt:192.168.1.3:554 -s dvbc:192.168.1.4 +# - specifies 1 dvbs2 (and dvbs)satip server with address 192.168.1.2:554 +# - specifies 1 dvbt satip server with address 192.168.1.3:554 +# - specifies 1 dvbc satip server with address 192.168.1.4:554 + +#* -O --satip-tcp Use RTSP over TCP instead of UDP for data transport + +#* -S --slave ADAPTER1,ADAPTER2-ADAPTER4[,..] - specify slave adapters +# * Allows specifying bonded adapters (multiple adapters connected with a splitter to the same LNB) +# Only one adapter needs to be master all others needs to have this parameter specified +# eg: -S 1-2 +# - specifies adapter 1 to 2 as slave, in this case adapter 0 can be the master that controls the LNB +# - the slave adapter will not control the LNB polarity or band, but it will just change the internal frequency to tune to a different transponder +# - in this way the master will be responsible for changing the LNB polarity and band + +#* -t --cleanpsi clean the PSI from all CA information, the client will see the channel as clear if decrypted successfully + +#* -T --threads: enables/disable multiple threads (reduces memory consumptions) (default: ENABLED) + +#* -u --unicable unicable_string: defines the unicable adapters (A) and their slot (S), frequency (F) and optionally the PIN for the switch: +# * The format is: A1:S1-F1[-PIN][,A2:S2-F2[-PIN][,...]] +# eg: 2:0-1284[-1111] +# * When * character is used before frequency, force 13V only for setup + +#* -j --jess jess_string - same format as -u + +#* -w --http-host http_server[:port]: specify the host and the port (if not 80) where the xml file can be downloaded from [default: default_local_ip_address:8080] +# * eg: -w 192.168.1.1:8080 + +#* -x --http-port port: port for listening on http [default: 8080] +# * eg: -x 9090 + +#* -X --xml PATH: the path to the xml that is provided as part of the satip protocol +# * by default desc.xml is provided by minisatip without needing an additional file, +# however satip.xml is included if it needs to be customized + +#* -y --rtsp-port rtsp_port: port for listening for rtsp requests [default: 554] +# * eg: -y 5544 +# - changing this to a port > 1024 removes the requirement for minisatip to run as root + + +MINISATIP_PARAM="-a 1" |