diff options
Diffstat (limited to 'request/request.conf')
| -rw-r--r-- | request/request.conf | 288 |
1 files changed, 0 insertions, 288 deletions
diff --git a/request/request.conf b/request/request.conf deleted file mode 100644 index 61dac25..0000000 --- a/request/request.conf +++ /dev/null @@ -1,288 +0,0 @@ -[folders] -# DISTFILES_DIR -# Define a dir to store distfiles -# Default: -# distfiles_dir=./distfiles -distfiles_dir=./distfiles - -# SEGMENTS_DIR -# Define a dir to store distfiles' segments -# Default: -# segments_dir=./tmp -segments_dir=./tmp - -[pkg_list] -# PKG_LIST_DIR -# Define a dir with pkg.list file -# Default: -# pkg_list_dir=./ -pkg_list_dir=./ - -# SYNOPSIS: del_pkg_list_when_dld_finished=0 | 1 -# - If del_pkg_list_when_dld_finished set to 1: -# Segget deletes pkg.list file, after all distfiles were successfuly fetched. -# Default: -# del_pkg_list_when_dld_finished=1 -del_pkg_list_when_dld_finished=1 - -[portage] -# SYNOPSIS: fetch_only=0 | 1 -# NOT IMPLEMENTED YET: fetch_only=0 - -[distfiles] -# MAX_CONNECTION_NUM_PER_DISTFILE -# Each distfile can have up to max_connection_num_per_distfile simultaneous -# connections. -# Minimum value: 1 -# Maximum value: 20 -# Default: -# max_connection_num_per_distfile=3 -max_connection_num_per_distfile=3 - -[segments] -# MAX_SEGMENT_SIZE -# Define maximum segment size in bytes. -# Minimum value: 10000 -# Maximum value: 10000000 -# Default: -# max_segment_size=500000 -max_segment_size=500000 - -# SYNOPSIS: resume_on=0 | 1 -# - If resume_on set to 1: -# Before starting downloading a segment segget checks whether this segment is -# already downloaded, checks segments size and if size mathces considers this -# segment to be downloaded and skips downloading process. -# - If resume_on set to 0: -# Segget always starts new fetch for a segment regardless of the fact whether it -# is downloaded or not. -# Default: -# resume_on=1 -resume_on=1 - -# MAX_TRIES -# If segment download was unsuccessful, new attempts are made. When attempts -# number reaches max_tries, segment gets FAILED status and error logged to error_log -# Minimum value: 1 -# Maximum value: -1 (for no limit) -# Default: -# max_tries=10 -max_tries=10 - -[connections] -# MAX_CONNECTIONS -# Define maximum number of connections -# Minimum value: 1 -# Maximum value: 20 -# Default: -# max_connections=10 -max_connections=10 - -# CURRENT_SPEED_TIME_INTERVAL_MSECS -# segget transfers may have bursty nature of their traffic. Therefore, while -# measuring current speed, segget actually calculates average speed during -# current_speed_time_interval_msecs time interval, defined in milliseconds. -# Minimum value: 100 -# Maximum value: 60000 -# Default: -# current_speed_time_interval_msecs=1000 -current_speed_time_interval_msecs=1000 - -# NOT IMPLEMENTED YET: max_total_speed=50000 - -[mirrors] -# MAX_CONNECTIONS_NUM_PER_MIRROR -# Define how many simultaneous downloads from one mirror segget is allowed to -# have. While choosing a mirror segget will skip mirrors with -# max_connections_num_per_mirror active downloads. -# Minimum value: 1 -# Maximum value: 10 -# Default: -# max_connections_num_per_mirror=1 -max_connections_num_per_mirror=1 - -# SYNOPSIS: collect_benchmark_stats_on=0 | 1 -# - If set to 1, stats on mirrors performance will be collected. -# default: -# collect_benchmark_stats_on=1 (Note: at the moment can NOT be changed) -collect_benchmark_stats_on=1 - -# SYNOPSIS: use_benchmark_stats=0 | 1 -# If use_benchmark_stats=1 statistics on mirrors is used to rate them -# and therefore improve performance. -# Each time connection from a particular mirror closes mirror->dld_time, -# and mirror->dld_size get increased (in case of unsuccessful connection -# only time gets increased), so avg speed for a mirror can be -# calculated: -# -# mirror->avg_speed=mirror->dld_size/mirror->dld_time. (1) -# -# When new segment is going to be started segget goes through the list of -# the mirrors distfile/segment has, and asks each mirror for self_rating: -# -# "ulong self_rating=mirror->mirror_on_the_wall();". -# -# This way segget chooses a mirror with the best self_rating. To calculate -# self_rating mirrors use the following formula: -# -# self_rating=dld_time/dld_size*honesty. (2) -# -# So mirrors actually say how bad they are. -# Even mirrors can have critical times, so to give mirrors another chance -# honesty was added to the formula (2). honesty can get values in -# interval (0,1]. Each time connection from a mirror opens or closes mirror -# sets its honesty=1. If mirror was asked for self_evaluation with -# mirror->mirror_on_the_wall(), but wasn't chosen its honesty decreases -# somewhat (see [mirror].benchmark_oblivion option), so next time it will -# lie little bit more about how bad it's. -# Default: -# use_benchmark_results=1 -# ***Note: at the moment use_benchmark_results can NOT be set to 0 -use_benchmark_stats=1 - -# BENCHMARK_OBLIVION -# benchmark_oblivion option allows to adjust how fast segget "forgets" -# benchmarking statistics on mirrors performance. -# Each time mirror->mirror_on_the_wall() called, mirror decreases its -# honesty (to have more chances next time) using the following formula: -# -# honesty=honesty*100/(100+settings.benchmark_oblivion) (3) -# -# Therefore, setting benchmark_oblivion=100 will make mirror look twice -# less bad next time mirror->mirror_on_the_wall() called. -# Minimum value: 0 (Beware: setting to 0, will can exclude unlucky mirrors) -# Maximum value: 1000 -# Default: -# benchmark_oblivion=5 -benchmark_oblivion=5 - -[provide_mirror_to_others] -# PROVIDE_MIRROR_DIR -# Define a dir for making symlinks to downloaded distfiles. This dir can be -# used to provide local mirror for other hosts (with help of Apache, vsftp, etc). -# If set to none, segget will not make symlinks. -# Default: -# provide_mirror_dir=none -provide_mirror_dir=./provide_mirror_dir - -# SYNOPSIS: PROVIDE_MIRROR_FILES_RESTRICT_LIST_ON= 0 | 1 -# If PROVIDE_MIRROR_DIR=none this option will be ignored. -# - If set to 1, segget will compare distfile name with the list of forbiden -# patterns from the restricted.conf file. If distfile name contains any of the -# patterns, no symlink will be provided to this distfile. -# Default: -# provide_mirror_files_restrict_list_on=0 -provide_mirror_files_restrict_list_on=0 - -[provide_proxy_fetcher_to_others] -# PROVIDE_PROXY_FETCHER_IP -# Define an ip address segget will use to provide access for tuiclients. -# The parameter should be a string holding your host dotted IP address. -# Default: -# provide_proxy_fetcher_ip=none -provide_proxy_fetcher_ip=127.0.0.1 - -# PROVIDE_PROXY_FETCHER_PORT -# Define a port segget will use to provide access for tuiclients. -# The parameter should be an integer. -# Minimum value: 1 -# Maximum value: 65535 -# Default: -# provide_proxy_fetcher_port=3131 -provide_proxy_fetcher_port=3130 - -[networks] -# NETWORK0_PRIORITY -# Define priority as a value in range from lowest 0 to highest 10. -# Segget tries to use networks with higher priority levels first, and in case of -# failure will switch to networks with lower priority levels. -# Segget will NOT use network if its priority level set to 0. Therefore at least -# one network must have priority level higher than 0. -# Networks with local mirrors usually would have higher priority than that of -# networks with remote mirrors. -# Segget can have up to 10 networks (from network0 to network9). -# Settings for each network should be defined in network#.conf file, where -# instead of # should be network number. For network0 it's network0.conf -# Default: -# network0_priority=10 -# network1_priority=0 -# network2_priority=0 -# network3_priority=0 -# network4_priority=0 -# network5_priority=0 -# network6_priority=0 -# network7_priority=0 -# network8_priority=0 -# network9_priority=0 -network0_priority=0 -network1_priority=0 -network2_priority=0 -network3_priority=0 -network4_priority=7 -network5_priority=0 -network6_priority=0 -network7_priority=0 -network8_priority=0 -network9_priority=0 - -[schedule] - -[user-data] -# USER_AGENT -# Set the User-Agent: header in the http request sent to the remote server. -# This can be used to fool servers or scripts. -# Default: -# user_agent=segget -user_agent=segget - -# Specify the user and password for authentication on a ftp servers. -# NOT IMPLEMENTED YET: ftp-user=anonymous -# NOT IMPLEMENTED YET: ftp-password=me@mail.ru - -[ui_server] -# tuiclient monitors segget's activity by establishing tcp connection -# with segget daemon (ui_server part of it). - -# UI_IP -# Define an ip address segget will use to provide access for tuiclients. -# The parameter should be a string holding your host dotted IP address. -# Default: -# ui_ip=127.0.0.1 -ui_ip=127.0.0.1 - -# UI_PORT -# Define a port segget will use to provide access for tuiclients. -# The parameter should be an integer. -# Minimum value: 1 -# Maximum value: 65535 -# Default: -# ui_port=9999 -ui_port=9999 - -[logs] -# LOGS_DIR -# Define a dir to store log files. -# Default: -# logs_dir=./logs -logs_dir=/home/mona/idfetcha/logs - -# GENERAL_LOG_FILE -# Define a file name to store general log. -# Set to none to disable loggin. -# Default: -# general_log_file=segget.log -general_log_file=segget.log - -# ERROR_LOG_FILE -# Define a file name to store error log. -# Set to none to disable loggin. -# Default: -# error_log_file=segget.log -error_log_file=error.log - -# DEBUG_LOG_FILE -# Define a file name to store debug log. -# Set to none to disable loggin. -# Default: -# debug_log_file=segget.log -debug_log_file=debug.log
\ No newline at end of file |