diff options
author | 2024-05-17 10:19:31 +0200 | |
---|---|---|
committer | 2024-05-17 10:19:31 +0200 | |
commit | c64a05c51a237c6011b0d57d3739cb27e1927f3d (patch) | |
tree | 87039cb89479e365c7a3d0b5e6f2adebf7bd5fdc | |
parent | 2024-05-09-python3-12: Add (diff) | |
download | gentoo-news-c64a05c51a237c6011b0d57d3739cb27e1927f3d.tar.gz gentoo-news-c64a05c51a237c6011b0d57d3739cb27e1927f3d.tar.bz2 gentoo-news-c64a05c51a237c6011b0d57d3739cb27e1927f3d.zip |
2024-05-17-dracut-ext-kmods: add news item
Signed-off-by: Andrew Ammerlaan <andrewammerlaan@gentoo.org>
-rw-r--r-- | 2024-05-17-dracut-ext-kmods/2024-05-17-dracut-ext-kmods.en.txt | 106 |
1 files changed, 106 insertions, 0 deletions
diff --git a/2024-05-17-dracut-ext-kmods/2024-05-17-dracut-ext-kmods.en.txt b/2024-05-17-dracut-ext-kmods/2024-05-17-dracut-ext-kmods.en.txt new file mode 100644 index 0000000..ff2bdf6 --- /dev/null +++ b/2024-05-17-dracut-ext-kmods/2024-05-17-dracut-ext-kmods.en.txt @@ -0,0 +1,106 @@ +Title: Changes to dracut kernel module/microcode handling +Author: Andrew Ammerlaan <andrewammerlaan@gentoo.org> +Posted: 2024-05-17 +Revision: 1 +News-Item-Format: 2.0 +Display-If-Installed: sys-kernel/dracut +Display-If-Installed: virtual/dist-kernel +Display-If-Installed: sys-kernel/linux-firmware +Display-If-Installed: sys-firmware/intel-microcode + + +Impact +==================== + +Several changes were made regarding out-of-tree kernel modules, CPU +microcode, and how these are handled in initial RAM file systems +(initramfs) generated by sys-kernel/dracut for distribution kernels. +Depending on the local Dracut and USE flag configuration, some +configuration adjustments may be required as a result of these changes. + +Background (the problem) +==================== + +Previously Dracut implicitly included all out-of-tree kernel modules +it could find. This leads to several problems: +- It unnecessarily increases the size of the initramfs +- It creates a bit of a mess when using distribution kernels, consider + the following: + 1) Distribution kernel is upgraded + 2) Initramfs for the new kernel is generated, it does not include + any out-of-tree kernel modules. + 3) Portage triggers rebuild of the out-of-tree kernel modules + 4) If zfs is installed, its rebuild will trigger an initramfs + re-installation. Otherwise no rebuild is triggered. + Problem: What is and is not included in the initramfs is now + ambiguous. It depends on the emerge order of the kernel modules + when zfs is used. And will completely change if at some later stage + regeneration of the initramfs is triggered manually via e.g.: + emerge --config sys-kernel/gentoo-kernel + As a result, Dracut's "--reproducible" setting is not working. And + the functionality of the initramfs may change (seemingly) at random. + +Background (the fix) +==================== + +Several things have been changed: +- Out-of-tree kernel modules installed by portage are explicitly omitted + from the initramfs generated by Dracut by default. +- Packages that install a kernel module for which it might make sense to + have it in the initramfs, have gained the "initramfs" USE flag. When + this flag is enabled, Dracut is instructed to include the installed + kernel modules. Packages for which it is essential that its kernel + modules are included in the initramfs have this new flag enabled + by default. +- When distribution kernels are used (USE=dist-kernel), and a module + that should be in the initramfs is installed (USE=initramfs) the + initramfs is always re-generated. +- The packages installing CPU microcode (sys-kernel/linux-firmware + and sys-firmware/intel-microcode) have been adjusted to mirror the + above changes for out-of-tree kernel modules. Both packages + have gained the "dist-kernel" USE flag, and the "initramfs" flag is + now enabled by default. When both flags are enabled, Dracut is + configured to include the installed microcode in the initramfs, and + then the initramfs is regenerated. When the "dist-kernel" flag is + disabled, the "initramfs" flag behaves as it previously did. + +User Action Required +==================== + +Users should double check two things: +1) Please ensure that you are *not* globally enabling or disabling + the "initramfs" USE flag. Enabling it globally might result in an + unnecessarily large initramfs. Disabling it globally might result + in missing functionality in the initramfs. Which could lead to boot + failure if, for example, the zfs module is missing while the root + partition is a zfs. +2) Any add_drivers, or omit_drivers lines in /etc/dracut.conf or + /etc/dracut.conf.d/* may override the Dracut configuration snippets + installed by the kernel module packages in + /usr/lib/dracut/dracut.conf.d. Please review your Dracut + configuration files to ensure that you are not unintentionally + overriding the settings set by Portage. + +Frequently Asked Questions +==================== + +A package installing a kernel module I would like in my initramfs has +not gained the "initramfs" USE flag. How do I proceed? + + Please report a new bug on bugs.gentoo.org, requesting that the + package maintainer consider adding support to the package for + including the modules in the initramfs. In the meantime you can + locally override the configuration provided by the package (see + below). Note though that when distribution kernels are used, + regeneration of the initramfs must be triggered manually via e.g.: + emerge --config sys-kernel/gentoo-kernel + +How do I override the provided Dracut configuration snippets to +include/exclude a custom list of modules? + + To override the provided configuration snippet, create a new file + /etc/dracut.conf.d/10-PACKAGENAME.conf, replacing PACKAGENAME with + the name of the package providing the module. Add to this file: + omit_drivers+=" my list of drivers to omit " + and/or + add_drivers+=" my list of drivers to include " |