path: root/sys-devel/gcc-config/files/gcc-config-1.3.8

#!/bin/bash
# Copyright 1999-2005 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
# $Header: /var/cvsroot/gentoo-x86/sys-devel/gcc-config/files/gcc-config-1.3.8,v 1.11 2005/04/09 18:37:48 vapier Exp $

trap ":" INT QUIT TSTP

source /sbin/functions.sh || {
	echo "$0: Could not source /sbin/functions.sh!"
	exit 1
}
umask 022

usage() {
cat << "USAGE_END"
Usage: gcc-config [options] [CC Profile]
Change the current cc/gcc profile, or give info about profiles.

Options:
  -O, --use-old              Use the old profile if one was selected.
  -P, --use-portage-chost    Only set to given profile if its CHOST is the 
                             same as that set for portage in /etc/make.conf
                             (or one of other portage config files...).
  -c, --get-current-profile  Print current used gcc profile.
  -l, --list-profiles        Print a list of available profiles.
  -E, --print-environ        Print environment that can be used to setup the
                             current gcc profile, or a specified one.
  -B, --get-bin-path         Print path where binaries of the given/current
                             profile are located.
  -L, --get-lib-path         Print path where libraries of the given/current
                             profile are located.
  -X, --get-stdcxx-incdir    Print path where g++ include files of the
                             given/current profile are located.

Profile names are of the form:  <CHOST>-<gcc version>
For example:                    i686-pc-linux-gnu-3.2.1
USAGE_END
	exit $1
}
[[ $# -lt 1 ]] && usage 1

find_path() {
	[[ -z $1 ]] && return 0

	local fullpath="$(type -P $1)"
	
	if [[ -x ${fullpath} ]] ; then
		echo "${fullpath}"
		return 0
	fi

	for x in /bin /sbin /usr/bin /usr/sbin /usr/local/bin /usr/local/sbin ; do
		if [[ -x ${x}/$1 ]] && [[ -r ${x}/$1 ]] ; then
			echo "${x}/$1"
			return 0
		fi
	done

	return 0
}

cmd_setup() {
	# Sourcing /etc/env.d/gcc/${CC_COMP} is going to mess up
	# PATH among things...
	CP="$(find_path cp)"
	RM="$(find_path rm)"
	MV="$(find_path mv)"
	LN="$(find_path ln)"
	CAT="$(find_path cat)"
	AWK="$(find_path gawk)"
	GREP="$(find_path grep)"
	FIND="$(find_path find)"
	CHMOD="$(find_path chmod)"
	TOUCH="$(find_path touch)"
	ENV_UPDATE="$(find_path env-update)"
}

get_real_chost() {
	[[ -n ${REAL_CHOST} ]] && return 0

	export REAL_CHOST="$(env -u CHOST portageq envvar CHOST)"

	if [[ -z ${REAL_CHOST} ]] ; then
		eerror "$0: Could not get portage CHOST!"
		return 1
	fi
}

is_cross_compiler() {
	get_real_chost
	[[ ${CC_COMP/${REAL_CHOST}} == ${CC_COMP} ]]
}

switch_profile() {
	local MY_LDPATH=
	local GCC_PROFILES=
	local OLD_CC_COMP=
	local GCC_BIN_PATH=

	if [[ "$(id -u)" -ne 0 ]] ; then
		eerror "$0: Must be root."
		exit 1
	fi

	ebegin "Switching to ${CC_COMP} compiler"

	# Sourcing /etc/env.d/gcc/${CC_COMP} is going to mess up
	# PATH among things...
	cmd_setup

	if ! is_cross_compiler ; then
		# Order our profiles to have the default first ...
		# We do this so that we can have them ordered with default
		# first in /etc/ld.so.conf, as the logical is that all
		# compilers for default CHOST will be used to compile stuff,
		# and thus we want all their lib paths in /etc/ld.so.conf ...
		get_real_chost
		GCC_PROFILES="$(${FIND} "${GCC_ENV_D}" -maxdepth 1 -name "${REAL_CHOST}-*" -a ! -name "${CC_COMP}")"
		GCC_PROFILES="${GCC_ENV_D}/${CC_COMP} ${GCC_PROFILES}"

		# Extract all LDPATH's for our CHOST
		MY_LDPATH=""
		for x in ${GCC_PROFILES} ; do
			if [[ -f ${x} ]] ; then
				source "${x}"

				# Handle LDPATH's that have multiple directories
				local old_IFS="${IFS}"
				export IFS=":"
				local sub_ldpath=
				for sub_ldpath in ${LDPATH} ; do
					if [[ -d ${sub_ldpath} ]] ; then
						if [[ ${MY_LDPATH/:${sub_ldpath}} == ${MY_LDPATH} ]] ; then
							MY_LDPATH="${MY_LDPATH}:${sub_ldpath}"
						fi
					fi
				done
				export IFS="${old_IFS}"
			fi
		done
		MY_LDPATH="${MY_LDPATH:1}" # trim leading :
	fi

	# Setup things properly again for this profile
	unset GCC_SPECS LDPATH
	source "${GCC_ENV_D}/${CC_COMP}"
	OLD_CC_COMP=$(get_current_profile)
	CTARGET="${CTARGET:-${REAL_CHOST}}"

	# What kind of env.d entry are we going to generate ?
	if is_cross_compiler ; then
		# Only keep PATH/ROOTPATH
		${AWK} '/^(PATH|ROOTPATH)=/ {print $0}' \
			"${GCC_ENV_D}/${CC_COMP}" > "${ENV_D}/05gcc-${CTARGET}"

		echo "CURRENT=${CC_COMP}" > "${GCC_ENV_D}/config-${CTARGET}"
	else
		# Pass all by default
		${AWK} '!/^(STDCXX_INCDIR|LDPATH|CC|CXX|CTARGET|GCCBITS|GCC_SPECS)=/ {print $0}' \
			"${GCC_ENV_D}/${CC_COMP}" > "${ENV_D}/05gcc"
		echo "LDPATH=\"${MY_LDPATH}\"" >> "${ENV_D}/05gcc"
		if [[ -n ${GCC_SPECS} ]] && [[ -e ${ROOT}/${GCC_SPECS} ]] ; then
			echo "GCC_SPECS=\"${GCC_SPECS}\"" >> "${ENV_D}/05gcc"
		else
			# People need to rebuild their gcc or setting GCC_SPECS to
			# "" will cause issues again :(
			if [[ ${ROOT} != "/" ]] ; then
				echo "GCC_SPECS=\"\"" >> "${ENV_D}/05gcc"
			else
				if ! GCC_SPECS="" /usr/bin/gcc -v &>/dev/null ; then
					echo
					ewarn "Your gcc has a bug with GCC_SPECS."
					ewarn "Please re-emerge gcc."
					ewarn "http://bugs.gentoo.org/show_bug.cgi?id=68395"
					echo
				else
					echo "GCC_SPECS=\"\"" >> "${ENV_D}/05gcc"
				fi
			fi
		fi

		echo "CURRENT=${CC_COMP}" > "${GCC_ENV_D}/config"
	fi

	# Save PATH
	GCC_BIN_PATH="${PATH}"
	# Fix environment
	source /etc/profile
	umask 022

	# Update the wrappers for this profile
	local native="gcc cpp cc c++ g++ f77 g77 gcj"
	is_cross_compiler && native=""
	for x in ${native} ${CTARGET}-{gcc,c++,g++,f77,g77,gcj} ; do
		# Make sure we have no stale wrappers
		${RM} -f "${ROOT}/usr/bin/${x}"
		[[ ${x:${#x}-3} == "gcc" || ${x:${#x}-3} == "g++" ]] \
			&& ${RM} -f "${ROOT}/usr/bin/${x}"{32,64}

		# Only install a wrapper if the binary exists ...
		# We want to figure out the 'reference file' for each 
		# wrapper (the binary we're 'wrapping') so that we can 
		# sync mtimes together.  This makes things like ccache
		# happy.  See Bug #70548 for more info.
		local ref=${ROOT}/${GCC_BIN_PATH}/${x}
		[[ ${x} == "cc" ]] && ref=${ROOT}/${GCC_BIN_PATH}/gcc
		if [[ -x ${ref} ]] ; then
			${CP} -f "${ROOT}/usr/lib/gcc-config/wrapper" \
			         "${ROOT}/usr/bin/${x}"
			touch -r "${ref}" "${ROOT}/usr/bin/${x}"

			# Install 32bit and 64bit wrappers if need be
			# This should probably get folded back into the wrapper ...
			if [[ ${x:${#x}-3} == "gcc" ]] || [[ ${x:${#x}-3} == "g++" ]] ; then
				for bits in ${GCCBITS} ; do
					echo "#!/bin/sh"$'\n'"exec ${x} -m${bits} \"\$@\"" \
						> "${ROOT}/usr/bin/${x}${bits}"
					chmod 755 "${ROOT}/usr/bin/${x}${bits}"
				done
			fi
		fi
	done
	# Only install cpp if switching to a native one
	if ! is_cross_compiler && [[ ${CTARGET} != *-solaris* ]] ; then
		${RM} -f "${ROOT}/lib/cpp"
		${CP} -f "${ROOT}/usr/lib/gcc-config/wrapper" "${ROOT}/lib/cpp"
	fi

	# We need to make sure that libgcc_s.so / libunwind.so make it into /lib.
	# On many systems (x86/amd64/etc...), this will probably never matter, 
	# but on other systems (arm/mips/etc...), this is quite critical.
	# http://bugs.gentoo.org/show_bug.cgi?id=60190
	#
	# Don't copy the library if we're being called by portage because 
	# this may cause python to start segfaulting all over the place 
	# since on many arches, it uses libgcc_s.so.
	if [[ -z ${PORTAGE_CALLER} ]] && ! is_cross_compiler ; then
		for gcclib in gcc_s unwind ; do
			if [[ -e ${ROOT}/${LDPATH}/lib${gcclib}.so ]] ; then
				rm -f "${ROOT}"/lib/lib${gcclib}.so*
				cp -a "${ROOT}/${LDPATH}"/lib${gcclib}.so* "${ROOT}"/lib/
			fi
		done
	fi

	if [[ ${ROOT} == "/" ]] && [[ ${OLD_CC_COMP} != ${CC_COMP} ]] ; then
		${ENV_UPDATE} &>/dev/null
	fi

	eend 0

	if [[ ${ROOT} == "/" ]] && [[ ${OLD_CC_COMP} != ${CC_COMP} ]] ; then
		echo
		ewarn "If you intend to use the gcc from the new profile in an already"
		ewarn "running shell, please remember to do:"
		echo
		ewarn "  # source /etc/profile"
		echo
	fi

	return 0
}

get_current_profile() {
	local conf="${GCC_ENV_D}/config"
	[[ -n ${CTARGET} ]] && conf="${GCC_ENV_D}/config-${CTARGET}"

	if [[ ! -f ${conf} ]] ; then
		eerror "$0: No gcc profile is active!"
		return 1
	fi

	source "${conf}"

	if [[ -z ${CURRENT} ]] ; then
		eerror "$0: No gcc profile is active!"
		return 1
	fi

	echo "${CURRENT}"

	return 0
}

list_profiles() {
	local i=1

	if [[ ! -f ${GCC_ENV_D}/config ]] ; then
		eerror "$0: No gcc profile is active; please select one!"
	else
		get_current_profile >/dev/null
	fi

	if [[ ${ROOT} != "/" ]] ; then
		echo "Using gcc-config info in ${ROOT}"
	fi
	for x in "${GCC_ENV_D}"/* ; do
		if [[ -f ${x} ]] && [[ ${x/\/config} == ${x} ]] ; then
			x=${x##*/}
			[[ ${x} == ${CURRENT} ]] && x="${x} *"
			echo "[${i}] ${x}"
			i=$((i + 1))
		fi
	done
}

print_environ() {
	local OLDPATH="${PATH}"
	local ENV_CMD=
	local SET_ELEMENT=

	source "${GCC_ENV_D}/${CC_COMP}"

	case ${SHELL} in
		*/csh|*/tsch)
			ENV_CMD="setenv"
			SET_ELEMENT=" "
			;;
		*)
			ENV_CMD="export"
			SET_ELEMENT="="
			;;
	esac

	echo "${ENV_CMD} PATH${SET_ELEMENT}\"${PATH}:${OLDPATH}\""
}

get_bin_path() {
	if [[ -e ${GCC_ENV_D}/${CC_COMP} ]] ; then
		source "${GCC_ENV_D}/${CC_COMP}"
		echo "${PATH}"
	else
		echo "no-config"
		echo "${GCC_ENV_D}/${CC_COMP} doesnt exist" 1>&2
	fi

	return 0
}

get_lib_path() {
	if [[ -e ${GCC_ENV_D}/${CC_COMP} ]] ; then
		source "${GCC_ENV_D}/${CC_COMP}"
		echo "${LDPATH}"
	else
		echo "no-config"
		echo "${GCC_ENV_D}/${CC_COMP} doesnt exist" 1>&2
	fi

	return 0
}

get_stdcxx_incdir() {
	if [[ -e ${GCC_ENV_D}/${CC_COMP} ]] ; then
		source "${GCC_ENV_D}/${CC_COMP}"
		echo "${LDPATH}/include/${STDCXX_INCDIR}"
	else
		echo "no-config"
		echo "${GCC_ENV_D}/${CC_COMP} doesnt exist" 1>&2
	fi

	return 0
}

NEED_ACTION="yes"
DOIT="switch_profile"
CHECK_CHOST="no"

CC_COMP=
[[ -z ${ROOT} ]] && ROOT="/"
[[ ${ROOT:-1} != "/" ]] && ROOT="${ROOT}/"
ENV_D="${ROOT}etc/env.d"
GCC_ENV_D="${ENV_D}/gcc"

for x in "$@" ; do
	case "${x}" in
		# Only use specified compiler if one is not already selected.
		-O|--use-old)
			if get_current_profile &>/dev/null ; then
				CC_COMP="$(get_current_profile)"
			fi
			;;
		-P|--use-portage-chost)
			CHECK_CHOST="yes"
			;;
		-c|--get-current-profile)
			if [[ ${NEED_ACTION} == "yes" ]] ; then
				NEED_ACTION="no"
				DOIT="get_current_profile"
			fi
			;;
		-l|--list-profiles)
			if [[ ${NEED_ACTION} == "yes" ]] ; then
				NEED_ACTION="no"
				DOIT="list_profiles"
			fi
			;;
		-E|--print-environ)
			if [[ ${NEED_ACTION} == "yes" ]] ; then
				NEED_ACTION="no"
				DOIT="print_environ"
			fi
			;;
		-B|--get-bin-path)
			if [[ ${NEED_ACTION} == "yes" ]] ; then
				NEED_ACTION="no"
				DOIT="get_bin_path"
			fi
			;;
		-L|--get-lib-path)
			if [[ ${NEED_ACTION} == "yes" ]] ; then
				NEED_ACTION="no"
				DOIT="get_lib_path"
			fi
			;;
		-X|--get-stdcxx-incdir)
			if [[ ${NEED_ACTION} == "yes" ]] ; then
				NEED_ACTION="no"
				DOIT="get_stdcxx_incdir"
			fi
			;;
		-h|--help)
			usage 0
			exit 0
			;;
		-v|--version)
			echo "gcc-config-PORTAGE-VERSION"
			exit 0
			;;
		-*)
			eerror "$0: Invalid switch!  Run $0 without parameters for help."
			exit 1
			;;
		*)
			if [[ -z ${CC_COMP} ]] ; then
				if [[ -z $(echo ${x} | tr -d '[:digit:]') ]] ; then
					# User gave us a # representing the profile
					i=1
					for y in "${GCC_ENV_D}"/* ; do
						[[ ${y/\/config} != ${y} ]] && continue

						if [[ -f ${y} ]] && [[ ${x} == ${i} ]] ; then
							CC_COMP="${y##*/}"
							break
						fi
						i=$((i + 1))
					done
				else
					# User gave us a full HOST-gccver
					x=${x##*/}
					if [[ ! -f ${GCC_ENV_D}/${x} ]] ; then
						eerror "$0: Could not locate '$x' in '${GCC_ENV_D}/'!"
						exit 1
					fi
					CC_COMP="${x}"
				fi
			else
				eerror "$0: Too many arguments!  Run $0 without parameters for help."
				exit 1
			fi
			;;
	esac
done

if [[ ${DOIT} == "switch_profile" ]] && [[ -z ${CC_COMP} ]] ; then
	usage 1
fi

if [[ -z ${CC_COMP} ]] ; then
	if get_current_profile &>/dev/null
	then
		CC_COMP="$(get_current_profile)"
	else
		list_profiles
		exit 1
	fi
fi

CC_COMP_NO_SPECS=$(echo ${CC_COMP} | awk -F- '{ print $1"-"$2"-"$3"-"$4"-"$5 }')

GCC_LIB=$(source "${GCC_ENV_D}/${CC_COMP}" 
	cmd_setup
	echo ${LDPATH} | ${AWK} -F/ '{ print  "/"$2"/"$3"/"$4"/" }')

if [[ ! -d ${ROOT}/${GCC_LIB}/${CC_COMP_NO_SPECS%-*}/${CC_COMP_NO_SPECS##*-} ]] || \
   [[ ! -f ${GCC_ENV_D}/${CC_COMP} ]]
then
	eerror "$0: Profile does not exist or invalid setting for ${GCC_ENV_D}/${CC_COMP}" 1>&2
	#exit 1
fi

if [[ ${CHECK_CHOST} == "yes" ]] ; then
	# Chosen CHOST are not the same as the real CHOST according to
	# make.conf, and --use-portage-chost option was given, so do nothing
	get_real_chost
	[[ ${CC_COMP%-*} != ${REAL_CHOST} ]] && exit 0
fi

eval ${DOIT}


# vim:ts=4