Get Gentoo!
gentoo.org sites
gentoo.org Wiki Bugs Forums Packages
Planet Archives Sources
Infra Status
summaryrefslogtreecommitdiff
path: root/sys-apps/hal
diff options
context:
space:
mode:
Diffstat (limited to 'sys-apps/hal')
-rw-r--r--sys-apps/hal/ChangeLog8
-rw-r--r--sys-apps/hal/hal-0.5.10.ebuild276
-rw-r--r--sys-apps/hal/hal-0.5.11-r2.ebuild298
-rw-r--r--sys-apps/hal/hal-0.5.11-r3.ebuild298
-rw-r--r--sys-apps/hal/hal-0.5.11.ebuild290
-rw-r--r--sys-apps/hal/hal-0.5.7.1-r5.ebuild202
-rw-r--r--sys-apps/hal/hal-0.5.9-r1.ebuild249
-rw-r--r--sys-apps/hal/hal-0.5.9.1-r1.ebuild233
-rw-r--r--sys-apps/hal/hal-0.5.9.1-r2.ebuild228
9 files changed, 7 insertions, 2075 deletions
diff --git a/sys-apps/hal/ChangeLog b/sys-apps/hal/ChangeLog
index 4a978d1a966c..0c5afaba1a84 100644
--- a/sys-apps/hal/ChangeLog
+++ b/sys-apps/hal/ChangeLog
@@ -1,6 +1,12 @@
# ChangeLog for sys-apps/hal
# Copyright 1999-2008 Gentoo Foundation; Distributed under the GPL v2
-# $Header: /var/cvsroot/gentoo-x86/sys-apps/hal/ChangeLog,v 1.257 2008/12/23 20:43:00 cardoe Exp $
+# $Header: /var/cvsroot/gentoo-x86/sys-apps/hal/ChangeLog,v 1.258 2008/12/23 21:04:59 cardoe Exp $
+
+ 23 Dec 2008; Doug Goldstein <cardoe@gentoo.org> -hal-0.5.7.1-r5.ebuild,
+ -hal-0.5.9-r1.ebuild, -hal-0.5.9.1-r1.ebuild, -hal-0.5.9.1-r2.ebuild,
+ -hal-0.5.10.ebuild, -hal-0.5.11.ebuild, -hal-0.5.11-r2.ebuild,
+ -hal-0.5.11-r3.ebuild:
+ remove old versions that are no longer supported
23 Dec 2008; Doug Goldstein <cardoe@gentoo.org> hal-0.5.11-r1.ebuild,
hal-0.5.11-r2.ebuild, hal-0.5.11-r3.ebuild, hal-0.5.11-r4.ebuild:
diff --git a/sys-apps/hal/hal-0.5.10.ebuild b/sys-apps/hal/hal-0.5.10.ebuild
deleted file mode 100644
index b2ce1232d9df..000000000000
--- a/sys-apps/hal/hal-0.5.10.ebuild
+++ /dev/null
@@ -1,276 +0,0 @@
-# Copyright 1999-2008 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/sys-apps/hal/hal-0.5.10.ebuild,v 1.19 2008/12/22 21:44:12 cardoe Exp $
-
-inherit eutils linux-info autotools flag-o-matic
-
-PATCH_VER="0"
-
-DESCRIPTION="Hardware Abstraction Layer"
-HOMEPAGE="http://www.freedesktop.org/Software/hal"
-SRC_URI="http://hal.freedesktop.org/releases/${P}.tar.gz
- http://dev.gentoo.org/~compnerd/files/${PN}/${P}-gentoo-patches-${PATCH_VER}.tar.bz2"
-
-LICENSE="|| ( GPL-2 AFL-2.0 )"
-SLOT="0"
-KEYWORDS="~alpha ~amd64 ~hppa ~ia64 ~mips ~ppc ~sparc ~x86"
-
-KERNEL_IUSE="kernel_linux kernel_FreeBSD"
-IUSE="acpi apm crypt debug dell disk-partition doc laptop selinux ${KERNEL_IUSE}"
-
-RDEPEND=">=dev-libs/glib-2.6
- >=dev-libs/dbus-glib-0.61
- >=dev-libs/expat-1.95.8
- >=sys-apps/pciutils-2.2.7-r1
- >=dev-libs/libusb-0.1.10a
- >=dev-util/gperf-3.0.3
- sys-apps/usbutils
- virtual/eject
- amd64? ( >=sys-apps/dmidecode-2.7 )
- dell? ( >=sys-libs/libsmbios-0.13.4 )
- disk-partition? (
- || (
- ~sys-apps/parted-1.7.1
- ~sys-apps/parted-1.8.6
- ~sys-apps/parted-1.8.7
- )
- )
- ia64? ( >=sys-apps/dmidecode-2.7 )
- kernel_linux? (
- >=sys-fs/udev-111
- !>=sys-fs/udev-125
- >=sys-apps/util-linux-2.13
- >=sys-kernel/linux-headers-2.6.19
- crypt? ( >=sys-fs/cryptsetup-1.0.5 )
- )
- kernel_FreeBSD? ( dev-libs/libvolume_id )
- x86? ( >=sys-apps/dmidecode-2.7 )
- selinux? ( sys-libs/libselinux sec-policy/selinux-hal )"
-DEPEND="${RDEPEND}
- dev-util/pkgconfig
- >=dev-util/intltool-0.35
- doc? (
- app-doc/doxygen
- app-text/docbook-sgml-utils
- app-text/xmlto
- dev-libs/libxml2
- )"
-PDEPEND=">=app-misc/hal-info-20071011
- laptop? ( >=sys-power/pm-utils-0.99.3 )"
-
-## HAL Daemon drops privledges so we need group access to read disks
-HALDAEMON_GROUPS_LINUX="haldaemon,plugdev,disk,cdrom,cdrw,floppy,usb"
-HALDAEMON_GROUPS_FREEBSD="haldaemon,plugdev,operator"
-
-function check_hotplug_net() {
- local CONFIG_CHECK="~HOTPLUG ~NET"
- local WARNING_HOTPLUG="CONFIG_HOTPLUG:\tis not set (required for HAL)
-"
- local WARNING_NET="CONFIG_NET:\tis not set (required for HAL)\n"
- check_extra_config
-}
-
-function check_inotify() {
- local CONFIG_CHECK="~INOTIFY_USER"
- local WARNING_INOTIFY_USER="CONFIG_INOTIFY_USER:\tis not set (required for HAL)\n"
- check_extra_config
-}
-
-function check_acpi_proc() {
- local CONFIG_CHECK="~ACPI_PROCFS ~ACPI_PROC_EVENT"
- local WARNING_ACPI_PROCFS="CONFIG_ACPI_PROCFS:\tis not set (required for HAL)\n"
- local WARNING_ACPI_PROC_EVENT="CONFIG_ACPI_PROC_EVENT:\tis not set (required for HAL)\n"
- check_extra_config
-}
-
-pkg_setup() {
- if use kernel_linux ; then
- if [ -e "${ROOT}/usr/src/linux/.config" ] ; then
- kernel_is ge 2 6 19 || \
- ewarn "HAL requires a kernel version 2.6.19 or newer"
- if kernel_is lt 2 6 23 && use acpi ; then
- check_acpi_proc
- fi
- fi
-
- check_hotplug_net
- check_inotify
- fi
-
- # http://devmanual.gentoo.org/ebuild-writing/functions/
- # http://bugs.gentoo.org/show_bug.cgi?id=191605
-
- # Create groups for hotplugging and HAL
- enewgroup haldaemon
- enewgroup plugdev
-
- # HAL drops priviledges by default now ...
- # ... so we must make sure it can read disk/cdrom info (ie. be in ${HALDAEMON_GROUPS} groups)
- if use kernel_linux; then
- enewuser haldaemon -1 "-1" /dev/null ${HALDAEMON_GROUPS_LINUX}
- elif use kernel_FreeBSD; then
- enewuser haldaemon -1 "-1" /dev/null ${HALDAEMON_GROUPS_FREEBSD}
- fi
-
- # Make sure that the haldaemon user is in the ${HALDAEMON_GROUPS}
- # If users have a problem with this, let them file a bug
- if [[ ${ROOT} == / ]] ; then
- if use kernel_linux; then
- usermod -G ${HALDAEMON_GROUPS_LINUX} haldaemon
- elif use kernel_FreeBSD; then
- pw usermod haldaemon -G ${HALDAEMON_GROUPS_FREEBSD}
- fi
- fi
-}
-
-src_unpack() {
- unpack ${A}
- cd "${S}"
-
- EPATCH_MULTI_MSG="Applying Gentoo Patchset ..." \
- EPATCH_SUFFIX="patch" \
- EPATCH_SOURCE="${WORKDIR}/hal-0.5.10-patches/" \
- EPATCH_FORCE="yes" \
- epatch
-
- epatch "${FILESDIR}"/${P}-autotools.patch #212772
-
- # Hide recovery partitions
- epatch "${FILESDIR}/hal-0.5.9-hide-recovery-partitions.patch"
-
- # Enable plugdev support
- epatch "${FILESDIR}/96_plugdev_allow_send.patch"
-
- eautoreconf
-}
-
-src_compile() {
- local acpi="$(use_enable acpi)"
- local backend=
- local hardware=
-
- append-flags -rdynamic
-
- if use kernel_linux ; then
- backend="linux"
- elif use kernel_FreeBSD ; then
- backend="freebsd"
- else
- eerror "Invalid backend"
- fi
-
- if use kernel_linux ; then
- if use acpi ; then
- # Using IBM ACPI and Toshiba ACPI results in double notification as this
- # was merged into the Linux Kernel 2.6.22
- if kernel_is lt 2 6 22 ; then
- acpi="$acpi --enable-acpi-ibm --enable-acpi-toshiba"
- else
- acpi="$acpi --disable-acpi-ibm --disable-acpi-toshiba"
- fi
-
- acpi="$acpi --enable-acpi-proc --enable-acpi-acpid"
- else
- acpi="$acpi --disable-acpi-ibm --disable-acpi-toshiba"
- acpi="$acpi --disable-acpi-proc --disable-acpi-acpid"
- fi
-
- hardware="--with-cpufreq --with-usb-csr --with-keymaps"
- use arm && hardware="$hardware --enable-omap"
-
- if use dell ; then
- hardware="$hardware --with-dell-backlight"
- else
- hardware="$hardware --without-dell-backlight"
- fi
- else
- hardware="--without-cpufreq --without-usb-csr --without-keymaps"
- hardware="$hardware --disable-omap"
- hardware="$hardware --without-dell-backlight"
- hardware="$hardware --enable-acpi-ibm --enable-acpi-toshiba"
- fi
-
- econf --with-backend=${backend} \
- --with-os-type=gentoo \
- --with-pid-file=/var/run/hald.pid \
- --with-hwdata=/usr/share/misc \
- --with-socket-dir=/var/run/hald \
- --enable-umount-helper \
- --enable-man-pages \
- --disable-policy-kit \
- --disable-console-kit \
- --disable-acl-management \
- --enable-pci \
- --enable-sonypic \
- $(use_enable apm) \
- $(use_enable arm pmu) \
- $(use_enable arm omap) \
- $(use_enable debug verbose-mode) \
- $(use_enable disk-partition parted) \
- $(use_enable doc docbook-docs) \
- $(use_enable doc doxygen-docs) \
- --docdir=/usr/share/doc/${PF} \
- --localstatedir=/var \
- ${acpi} ${hardware} \
- || die "configure failed"
-
- emake || die "make failed"
-}
-
-src_install() {
- make DESTDIR="${D}" install || die
- dodoc AUTHORS ChangeLog NEWS README
-
- # hal umount for unclean unmounts
- exeinto /lib/udev/
- newexe "${FILESDIR}"/hal-unmount.dev hal_unmount
-
- # initscript
- newinitd "${FILESDIR}"/0.5.10-hald.rc hald
-
- # configuration
- cp "${FILESDIR}"/0.5.10-hald.conf "${WORKDIR}"/
-
- if use debug; then
- sed -e 's:HALD_VERBOSE="no":HALD_VERBOSE="yes":' \
- -i "${WORKDIR}"/0.5.10-hald.conf
- fi
- newconfd "${WORKDIR}"/0.5.10-hald.conf hald
-
- # We now create and keep /media here as both gnome-mount and pmount
- # use these directories, to avoid collision.
- keepdir /media
-
- # We also need to create and keep /etc/fdi/{information,policy,preprobe}
- # or else hal bombs.
- keepdir /etc/hal/fdi/{information,policy,preprobe}
-
- # HAL stores it's fdi cache in /var/lib/cache/hald
- keepdir /var/lib/cache/hald
-
- # HAL keeps its unix socket here
- keepdir /var/run/hald
- keepdir /var/lib/hal
-}
-
-pkg_postinst() {
- # Despite what people keep changing this location. Either one works.. it doesn't matter
- # http://dev.gentoo.org/~plasmaroo/devmanual/ebuild-writing/functions/
-
- elog "The HAL daemon needs to be running for certain applications to"
- elog "work. Suggested is to add the init script to your start-up"
- elog "scripts, this should be done like this :"
- elog "\`rc-update add hald default\`"
- echo
- elog "Looking for automounting support? Add yourself to the plugdev group"
-
- elog "IF you have additional applications which consume ACPI events, you"
- elog "should consider installing acpid to allow applications to share ACPI"
- elog "events."
-
- elog "If you wish to use a non US layout, you may do so by executing:"
- elog "setxkbmap <layout> or by utilizing your Desktop Environment's"
- elog "Keyboard Layout Settings mechanism."
- elog "Under GNOME, this is gnome-keyboard-properties, and under KDE"
- elog "it is kxkb."
-}
diff --git a/sys-apps/hal/hal-0.5.11-r2.ebuild b/sys-apps/hal/hal-0.5.11-r2.ebuild
deleted file mode 100644
index 1b50a7c8a87c..000000000000
--- a/sys-apps/hal/hal-0.5.11-r2.ebuild
+++ /dev/null
@@ -1,298 +0,0 @@
-# Copyright 1999-2008 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/sys-apps/hal/hal-0.5.11-r2.ebuild,v 1.6 2008/12/23 20:43:00 cardoe Exp $
-
-inherit eutils linux-info autotools flag-o-matic
-
-PATCH_VERSION="2"
-
-DESCRIPTION="Hardware Abstraction Layer"
-HOMEPAGE="http://www.freedesktop.org/Software/hal"
-SRC_URI="http://hal.freedesktop.org/releases/${P/_/}.tar.bz2
- http://dev.gentoo.org/~compnerd/files/${PN}/${P}-gentoo-patches-${PATCH_VERSION}.tar.bz2"
-
-LICENSE="|| ( GPL-2 AFL-2.0 )"
-SLOT="0"
-KEYWORDS="~alpha ~amd64 ~hppa ~ia64 ~ppc ~sparc ~x86"
-
-KERNEL_IUSE="kernel_linux kernel_FreeBSD"
-IUSE="X acpi apm crypt debug dell disk-partition doc laptop selinux ${KERNEL_IUSE}"
-
-RDEPEND=">=dev-libs/dbus-glib-0.61
- >=dev-libs/glib-2.14
- >=dev-libs/expat-1.95.8
- >=dev-libs/libusb-0.1.10a
- >=sys-apps/pciutils-2.2.7-r1
- >=dev-util/gperf-3.0.3
- sys-apps/usbutils
- virtual/eject
- amd64? ( >=sys-apps/dmidecode-2.7 )
- dell? ( >=sys-libs/libsmbios-0.13.4 )
- disk-partition? ( >=sys-apps/parted-1.8.0 )
- ia64? ( >=sys-apps/dmidecode-2.7 )
- kernel_linux? (
- >=sys-fs/udev-117
- >=sys-apps/util-linux-2.13
- >=sys-kernel/linux-headers-2.6.19
- crypt? ( >=sys-fs/cryptsetup-1.0.5 )
- )
- kernel_FreeBSD? ( >=dev-libs/libvolume_id-0.77 )
- x86? ( >=sys-apps/dmidecode-2.7 )
- selinux? ( sys-libs/libselinux sec-policy/selinux-hal )"
-DEPEND="${RDEPEND}
- dev-util/pkgconfig
- >=dev-util/intltool-0.35
- X? ( >=dev-python/pyxf86config-0.3.34-r1 )
- doc? (
- app-text/xmlto
- dev-libs/libxml2
- dev-util/gtk-doc
- app-text/docbook-sgml-utils
- )"
-PDEPEND="|| ( =app-misc/hal-info-20080310 =app-misc/hal-info-20080508 )
- !gnome-extra/hal-device-manager
- laptop? ( >=sys-power/pm-utils-0.99.3 )"
-
-## HAL Daemon drops privledges so we need group access to read disks
-HALDAEMON_GROUPS_LINUX="haldaemon,plugdev,disk,cdrom,cdrw,floppy,usb"
-HALDAEMON_GROUPS_FREEBSD="haldaemon,plugdev,operator"
-
-function check_hotplug_net() {
- local CONFIG_CHECK="~HOTPLUG ~NET"
- local WARNING_HOTPLUG="CONFIG_HOTPLUG:\tis not set (required for HAL)\n"
- local WARNING_NET="CONFIG_NET:\tis not set (required for HAL)\n"
- check_extra_config
-}
-
-function check_inotify() {
- local CONFIG_CHECK="~INOTIFY_USER"
- local WARNING_INOTIFY_USER="CONFIG_INOTIFY_USER:\tis not set (required for HAL)\n"
- check_extra_config
-}
-
-function check_acpi_proc() {
- local CONFIG_CHECK="~ACPI_PROCFS ~ACPI_PROC_EVENT"
- local WARNING_ACPI_PROCFS="CONFIG_ACPI_PROCFS:\tis not set (required for HAL)\n"
- local WARNING_ACPI_PROC_EVENT="CONFIG_ACPI_PROC_EVENT:\tis not set (required for HAL)\n"
- check_extra_config
-}
-
-pkg_setup() {
- if use kernel_linux ; then
- if [[ -e "${ROOT}/usr/src/linux/.config" ]] ; then
- kernel_is ge 2 6 19 || ewarn "HAL requires a kernel version 2.6.19 or newer"
-
- if kernel_is lt 2 6 23 && use acpi ; then
- check_acpi_proc
- fi
- fi
-
- check_hotplug_net
- check_inotify
- fi
-
- # http://devmanual.gentoo.org/ebuild-writing/functions/
- # http://bugs.gentoo.org/show_bug.cgi?id=191605
-
- # Create groups for hotplugging and HAL
- enewgroup haldaemon
- enewgroup plugdev
-
- # HAL drops priviledges by default now ...
- # ... so we must make sure it can read disk/cdrom info (ie. be in ${HALDAEMON_GROUPS} groups)
- if use kernel_linux; then
- enewuser haldaemon -1 "-1" /dev/null ${HALDAEMON_GROUPS_LINUX}
- elif use kernel_FreeBSD; then
- enewuser haldaemon -1 "-1" /dev/null ${HALDAEMON_GROUPS_FREEBSD}
- fi
-
- # Make sure that the haldaemon user is in the ${HALDAEMON_GROUPS}
- # If users have a problem with this, let them file a bug
- if [[ ${ROOT} == / ]] ; then
- if use kernel_linux; then
- usermod -G ${HALDAEMON_GROUPS_LINUX} haldaemon
- elif use kernel_FreeBSD; then
- pw usermod haldaemon -G ${HALDAEMON_GROUPS_FREEBSD}
- fi
- fi
-}
-
-S="${WORKDIR}/${PF/-r*/}"
-
-src_unpack() {
- unpack ${A}
- cd "${S}"
-
- EPATCH_MULTI_MSG="Applying Gentoo Patchset ..." \
- EPATCH_SUFFIX="patch" \
- EPATCH_SOURCE="${WORKDIR}/${P}-patches/" \
- EPATCH_FORCE="yes" \
- epatch
-
- eautoreconf
-}
-
-src_compile() {
- local acpi="$(use_enable acpi)"
- local backend=
- local hardware=
-
- append-flags -rdynamic
-
- if use kernel_linux ; then
- backend="linux"
- elif use kernel_FreeBSD ; then
- backend="freebsd"
- else
- eerror "Invalid backend"
- fi
-
- if use kernel_linux ; then
- if use acpi ; then
- # Using IBM ACPI and Toshiba ACPI results in double notification as this
- # was merged into the Linux Kernel 2.6.22
- if kernel_is lt 2 6 22 ; then
- acpi="$acpi --enable-acpi-ibm --enable-acpi-toshiba"
- else
- acpi="$acpi --disable-acpi-ibm --disable-acpi-toshiba"
- fi
-
- acpi="$acpi --enable-acpi-proc --enable-acpi-acpid"
- else
- acpi="$acpi --disable-acpi-ibm --disable-acpi-toshiba"
- acpi="$acpi --disable-acpi-proc --disable-acpi-acpid"
- fi
-
- hardware="--with-cpufreq --with-usb-csr --with-keymaps"
- use arm && hardware="$hardware --with-omap"
-
- if use dell ; then
- hardware="$hardware --with-dell-backlight"
- else
- hardware="$hardware --without-dell-backlight"
- fi
-
- hardware="$hardware --enable-sonypic"
- else
- hardware="--without-cpufreq --without-usb-csr --without-keymaps"
- hardware="$hardware --without-omap"
- hardware="$hardware --without-dell-backlight"
- hardware="$hardware --enable-acpi-ibm --enable-acpi-toshiba"
- hardware="$hardware --disable-sonypic"
- fi
-
- econf --with-backend=${backend} \
- --with-os-type=gentoo \
- --with-pid-file=/var/run/hald.pid \
- --with-hwdata=/usr/share/misc \
- --with-socket-dir=/var/run/hald \
- --enable-umount-helper \
- --enable-man-pages \
- --disable-policy-kit \
- --disable-console-kit \
- --disable-acl-management \
- --enable-pci \
- $(use_enable apm) \
- $(use_enable arm pmu) \
- $(use_enable debug verbose-mode) \
- $(use_enable disk-partition parted) \
- $(use_enable doc docbook-docs) \
- $(use_enable doc gtk-doc) \
- --docdir=/usr/share/doc/${PF} \
- --localstatedir=/var \
- ${acpi} ${hardware} \
- || die "configure failed"
-
- emake || die "make failed"
-}
-
-src_install() {
- emake DESTDIR="${D}" install || die
- dodoc AUTHORS ChangeLog NEWS README || die "docs failed"
-
- # hal umount for unclean unmounts
- exeinto /lib/udev/
- newexe "${FILESDIR}/hal-unmount.dev" hal_unmount || die "udev helper failed"
-
- # initscript
- newinitd "${FILESDIR}/0.5.10-hald.rc" hald || die "init script failed"
-
- # configuration
- cp "${FILESDIR}/0.5.10-hald.conf" "${WORKDIR}/" || \
- die "failed to copy hald.conf"
-
- if use debug; then
- sed -e 's:HALD_VERBOSE="no":HALD_VERBOSE="yes":' \
- -i "${WORKDIR}/0.5.10-hald.conf" || die "failed to change verbose"
- fi
- newconfd "${WORKDIR}/0.5.10-hald.conf" hald
-
- if use X ; then
- # New Configuration Snippets
- dodoc "${WORKDIR}/${PN}-config-examples/"*.fdi || die
- dobin "${WORKDIR}/${PN}-config-examples/migrate-xorg-to-fdi.py" || die
-
- # Automagic conversion!
- elog "Migrating xorg.conf Core Keyboard configuration to HAL FDI file..."
- "${WORKDIR}/${PN}-config-examples/migrate-xorg-to-fdi.py" 2> /dev/null > "${D}/etc/hal/fdi/policy/10-x11-input.fdi" || \
- ewarn "Failed to migrate your keyboard configuration."
- fi
-
- # We now create and keep /media here as both gnome-mount and pmount
- # use these directories, to avoid collision.
- keepdir /media
-
- # We also need to create and keep /etc/fdi/{information,policy,preprobe}
- # or else hal bombs.
- keepdir /etc/hal/fdi/{information,policy,preprobe}
-
- # HAL stores it's fdi cache in /var/lib/cache/hald
- keepdir /var/lib/cache/hald
-
- # HAL keeps its unix socket here
- keepdir /var/run/hald
- keepdir /var/lib/hal
-}
-
-pkg_postinst() {
- # Despite what people keep changing this location. Either one works.. it doesn't matter
- # http://dev.gentoo.org/~plasmaroo/devmanual/ebuild-writing/functions/
-
- elog "The HAL daemon needs to be running for certain applications to"
- elog "work. Suggested is to add the init script to your start-up"
- elog "scripts, this should be done like this :"
- elog "\`rc-update add hald default\`"
- echo
- elog "Looking for automounting support? Add yourself to the plugdev group"
- echo
- elog "IF you have additional applications which consume ACPI events, you"
- elog "should consider installing acpid to allow applications to share ACPI"
- elog "events."
- if use X ; then
- echo
- elog "If you wish to use a non US layout, you may do so by executing:"
- elog "setxkbmap <layout> or by utilizing your Desktop Environment's"
- elog "Keyboard Layout Settings mechanism."
- elog "Under GNOME, this is gnome-keyboard-properties, and under KDE"
- elog "it is kxkb."
- fi
- echo
- elog "In order have suspend/hibernate function with HAL or apps that use HAL"
- elog "(such as gnome-power-manager), you should build HAL with the laptop"
- elog "useflag which will install pm-utils."
- if use X ; then
- echo
- elog "X Input Hotplugging (if you build xorg-server with the HAL useflag)"
- elog "reads user specific configuration from /etc/hal/fdi/policy/."
- if [[ $(cat "${ROOT}etc/hal/fdi/policy/10-x11-input.fdi" | wc -c) -gt 0 ]]
- then
- elog "We have converted your existing xorg.conf rules and the FDI is stored"
- elog "at /etc/hal/fdi/policy/10-x11-input.fdi"
- fi
- elog "You should remove the Input sections from your xorg.conf once you have"
- elog "migrated the rules to a HAL fdi file."
- fi
-
- ebeep 5
- epause 5
-}
diff --git a/sys-apps/hal/hal-0.5.11-r3.ebuild b/sys-apps/hal/hal-0.5.11-r3.ebuild
deleted file mode 100644
index b1fe12fa3d57..000000000000
--- a/sys-apps/hal/hal-0.5.11-r3.ebuild
+++ /dev/null
@@ -1,298 +0,0 @@
-# Copyright 1999-2008 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/sys-apps/hal/hal-0.5.11-r3.ebuild,v 1.4 2008/12/23 20:43:00 cardoe Exp $
-
-inherit eutils linux-info autotools flag-o-matic
-
-PATCH_VERSION="3"
-
-DESCRIPTION="Hardware Abstraction Layer"
-HOMEPAGE="http://www.freedesktop.org/Software/hal"
-SRC_URI="http://hal.freedesktop.org/releases/${P/_/}.tar.bz2
- http://dev.gentoo.org/~compnerd/files/${PN}/${P}-gentoo-patches-${PATCH_VERSION}.tar.bz2"
-
-LICENSE="|| ( GPL-2 AFL-2.0 )"
-SLOT="0"
-KEYWORDS="~alpha ~amd64 ~hppa ~ia64 ~ppc ~sparc ~x86"
-
-KERNEL_IUSE="kernel_linux kernel_FreeBSD"
-IUSE="X acpi apm crypt debug dell disk-partition doc laptop selinux ${KERNEL_IUSE}"
-
-RDEPEND=">=dev-libs/dbus-glib-0.61
- >=dev-libs/glib-2.14
- >=dev-libs/expat-1.95.8
- >=dev-libs/libusb-0.1.10a
- >=sys-apps/pciutils-2.2.7-r1
- >=dev-util/gperf-3.0.3
- sys-apps/usbutils
- virtual/eject
- amd64? ( >=sys-apps/dmidecode-2.7 )
- dell? ( >=sys-libs/libsmbios-0.13.4 )
- disk-partition? ( >=sys-apps/parted-1.8.0 )
- ia64? ( >=sys-apps/dmidecode-2.7 )
- kernel_linux? (
- >=sys-fs/udev-117
- >=sys-apps/util-linux-2.13
- >=sys-kernel/linux-headers-2.6.19
- crypt? ( >=sys-fs/cryptsetup-1.0.5 )
- )
- kernel_FreeBSD? ( >=dev-libs/libvolume_id-0.77 )
- x86? ( >=sys-apps/dmidecode-2.7 )
- selinux? ( sys-libs/libselinux sec-policy/selinux-hal )"
-DEPEND="${RDEPEND}
- dev-util/pkgconfig
- >=dev-util/intltool-0.35
- X? ( >=dev-python/pyxf86config-0.3.34-r1 )
- doc? (
- app-text/xmlto
- dev-libs/libxml2
- dev-util/gtk-doc
- app-text/docbook-sgml-utils
- )"
-PDEPEND="|| ( =app-misc/hal-info-20080310 =app-misc/hal-info-20080508 )
- !gnome-extra/hal-device-manager
- laptop? ( >=sys-power/pm-utils-0.99.3 )"
-
-## HAL Daemon drops privledges so we need group access to read disks
-HALDAEMON_GROUPS_LINUX="haldaemon,plugdev,disk,cdrom,cdrw,floppy,usb"
-HALDAEMON_GROUPS_FREEBSD="haldaemon,plugdev,operator"
-
-function check_hotplug_net() {
- local CONFIG_CHECK="~HOTPLUG ~NET"
- local WARNING_HOTPLUG="CONFIG_HOTPLUG:\tis not set (required for HAL)\n"
- local WARNING_NET="CONFIG_NET:\tis not set (required for HAL)\n"
- check_extra_config
-}
-
-function check_inotify() {
- local CONFIG_CHECK="~INOTIFY_USER"
- local WARNING_INOTIFY_USER="CONFIG_INOTIFY_USER:\tis not set (required for HAL)\n"
- check_extra_config
-}
-
-function check_acpi_proc() {
- local CONFIG_CHECK="~ACPI_PROCFS ~ACPI_PROC_EVENT"
- local WARNING_ACPI_PROCFS="CONFIG_ACPI_PROCFS:\tis not set (required for HAL)\n"
- local WARNING_ACPI_PROC_EVENT="CONFIG_ACPI_PROC_EVENT:\tis not set (required for HAL)\n"
- check_extra_config
-}
-
-pkg_setup() {
- if use kernel_linux ; then
- if [[ -e "${ROOT}/usr/src/linux/.config" ]] ; then
- kernel_is ge 2 6 19 || ewarn "HAL requires a kernel version 2.6.19 or newer"
-
- if kernel_is lt 2 6 23 && use acpi ; then
- check_acpi_proc
- fi
- fi
-
- check_hotplug_net
- check_inotify
- fi
-
- # http://devmanual.gentoo.org/ebuild-writing/functions/
- # http://bugs.gentoo.org/show_bug.cgi?id=191605
-
- # Create groups for hotplugging and HAL
- enewgroup haldaemon
- enewgroup plugdev
-
- # HAL drops priviledges by default now ...
- # ... so we must make sure it can read disk/cdrom info (ie. be in ${HALDAEMON_GROUPS} groups)
- if use kernel_linux; then
- enewuser haldaemon -1 "-1" /dev/null ${HALDAEMON_GROUPS_LINUX}
- elif use kernel_FreeBSD; then
- enewuser haldaemon -1 "-1" /dev/null ${HALDAEMON_GROUPS_FREEBSD}
- fi
-
- # Make sure that the haldaemon user is in the ${HALDAEMON_GROUPS}
- # If users have a problem with this, let them file a bug
- if [[ ${ROOT} == / ]] ; then
- if use kernel_linux; then
- usermod -G ${HALDAEMON_GROUPS_LINUX} haldaemon
- elif use kernel_FreeBSD; then
- pw usermod haldaemon -G ${HALDAEMON_GROUPS_FREEBSD}
- fi
- fi
-}
-
-S="${WORKDIR}/${PF/-r*/}"
-
-src_unpack() {
- unpack ${A}
- cd "${S}"
-
- EPATCH_MULTI_MSG="Applying Gentoo Patchset ..." \
- EPATCH_SUFFIX="patch" \
- EPATCH_SOURCE="${WORKDIR}/${P}-patches/" \
- EPATCH_FORCE="yes" \
- epatch
-
- eautoreconf
-}
-
-src_compile() {
- local acpi="$(use_enable acpi)"
- local backend=
- local hardware=
-
- append-flags -rdynamic
-
- if use kernel_linux ; then
- backend="linux"
- elif use kernel_FreeBSD ; then
- backend="freebsd"
- else
- eerror "Invalid backend"
- fi
-
- if use kernel_linux ; then
- if use acpi ; then
- # Using IBM ACPI and Toshiba ACPI results in double notification as this
- # was merged into the Linux Kernel 2.6.22
- if kernel_is lt 2 6 22 ; then
- acpi="$acpi --enable-acpi-ibm --enable-acpi-toshiba"
- else
- acpi="$acpi --disable-acpi-ibm --disable-acpi-toshiba"
- fi
-
- acpi="$acpi --enable-acpi-proc --enable-acpi-acpid"
- else
- acpi="$acpi --disable-acpi-ibm --disable-acpi-toshiba"
- acpi="$acpi --disable-acpi-proc --disable-acpi-acpid"
- fi
-
- hardware="--with-cpufreq --with-usb-csr --with-keymaps"
- use arm && hardware="$hardware --with-omap"
-
- if use dell ; then
- hardware="$hardware --with-dell-backlight"
- else
- hardware="$hardware --without-dell-backlight"
- fi
-
- hardware="$hardware --enable-sonypic"
- else
- hardware="--without-cpufreq --without-usb-csr --without-keymaps"
- hardware="$hardware --without-omap"
- hardware="$hardware --without-dell-backlight"
- hardware="$hardware --enable-acpi-ibm --enable-acpi-toshiba"
- hardware="$hardware --disable-sonypic"
- fi
-
- econf --with-backend=${backend} \
- --with-os-type=gentoo \
- --with-pid-file=/var/run/hald.pid \
- --with-hwdata=/usr/share/misc \
- --with-socket-dir=/var/run/hald \
- --enable-umount-helper \
- --enable-man-pages \
- --disable-policy-kit \
- --disable-console-kit \
- --disable-acl-management \
- --enable-pci \
- $(use_enable apm) \
- $(use_enable arm pmu) \
- $(use_enable debug verbose-mode) \
- $(use_enable disk-partition parted) \
- $(use_enable doc docbook-docs) \
- $(use_enable doc gtk-doc) \
- --docdir=/usr/share/doc/${PF} \
- --localstatedir=/var \
- ${acpi} ${hardware} \
- || die "configure failed"
-
- emake || die "make failed"
-}
-
-src_install() {
- emake DESTDIR="${D}" install || die
- dodoc AUTHORS ChangeLog NEWS README || die "docs failed"
-
- # hal umount for unclean unmounts
- exeinto /lib/udev/
- newexe "${FILESDIR}/hal-unmount.dev" hal_unmount || die "udev helper failed"
-
- # initscript
- newinitd "${FILESDIR}/0.5.10-hald.rc" hald || die "init script failed"
-
- # configuration
- cp "${FILESDIR}/0.5.10-hald.conf" "${WORKDIR}/" || \
- die "failed to copy hald.conf"
-
- if use debug; then
- sed -e 's:HALD_VERBOSE="no":HALD_VERBOSE="yes":' \
- -i "${WORKDIR}/0.5.10-hald.conf" || die "failed to change verbose"
- fi
- newconfd "${WORKDIR}/0.5.10-hald.conf" hald
-
- if use X ; then
- # New Configuration Snippets
- dodoc "${WORKDIR}/${PN}-config-examples/"*.fdi || die
- dobin "${WORKDIR}/${PN}-config-examples/migrate-xorg-to-fdi.py" || die
-
- # Automagic conversion!
- elog "Migrating xorg.conf Core Keyboard configuration to HAL FDI file..."
- "${WORKDIR}/${PN}-config-examples/migrate-xorg-to-fdi.py" 2> /dev/null > "${D}/etc/hal/fdi/policy/10-x11-input.fdi" || \
- ewarn "Failed to migrate your keyboard configuration."
- fi
-
- # We now create and keep /media here as both gnome-mount and pmount
- # use these directories, to avoid collision.
- keepdir /media
-
- # We also need to create and keep /etc/fdi/{information,policy,preprobe}
- # or else hal bombs.
- keepdir /etc/hal/fdi/{information,policy,preprobe}
-
- # HAL stores it's fdi cache in /var/lib/cache/hald
- keepdir /var/lib/cache/hald
-
- # HAL keeps its unix socket here
- keepdir /var/run/hald
- keepdir /var/lib/hal
-}
-
-pkg_postinst() {
- # Despite what people keep changing this location. Either one works.. it doesn't matter
- # http://dev.gentoo.org/~plasmaroo/devmanual/ebuild-writing/functions/
-
- elog "The HAL daemon needs to be running for certain applications to"
- elog "work. Suggested is to add the init script to your start-up"
- elog "scripts, this should be done like this :"
- elog "\`rc-update add hald default\`"
- echo
- elog "Looking for automounting support? Add yourself to the plugdev group"
- echo
- elog "IF you have additional applications which consume ACPI events, you"
- elog "should consider installing acpid to allow applications to share ACPI"
- elog "events."
- if use X ; then
- echo
- elog "If you wish to use a non US layout, you may do so by executing:"
- elog "setxkbmap <layout> or by utilizing your Desktop Environment's"
- elog "Keyboard Layout Settings mechanism."
- elog "Under GNOME, this is gnome-keyboard-properties, and under KDE"
- elog "it is kxkb."
- fi
- echo
- elog "In order have suspend/hibernate function with HAL or apps that use HAL"
- elog "(such as gnome-power-manager), you should build HAL with the laptop"
- elog "useflag which will install pm-utils."
- if use X ; then
- echo
- elog "X Input Hotplugging (if you build xorg-server with the HAL useflag)"
- elog "reads user specific configuration from /etc/hal/fdi/policy/."
- if [[ $(cat "${ROOT}etc/hal/fdi/policy/10-x11-input.fdi" | wc -c) -gt 0 ]]
- then
- elog "We have converted your existing xorg.conf rules and the FDI is stored"
- elog "at /etc/hal/fdi/policy/10-x11-input.fdi"
- fi
- elog "You should remove the Input sections from your xorg.conf once you have"
- elog "migrated the rules to a HAL fdi file."
- fi
-
- ebeep 5
- epause 5
-}
diff --git a/sys-apps/hal/hal-0.5.11.ebuild b/sys-apps/hal/hal-0.5.11.ebuild
deleted file mode 100644
index 0a404a7aa09d..000000000000
--- a/sys-apps/hal/hal-0.5.11.ebuild
+++ /dev/null
@@ -1,290 +0,0 @@
-# Copyright 1999-2008 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/sys-apps/hal/hal-0.5.11.ebuild,v 1.8 2008/12/22 21:44:12 cardoe Exp $
-
-inherit eutils linux-info autotools flag-o-matic
-
-PATCH_VERSION="0"
-
-DESCRIPTION="Hardware Abstraction Layer"
-HOMEPAGE="http://www.freedesktop.org/Software/hal"
-SRC_URI="http://hal.freedesktop.org/releases/${P/_/}.tar.gz
- http://dev.gentoo.org/~compnerd/files/${PN}/${P}-gentoo-patches-${PATCH_VERSION}.tar.bz2"
-
-LICENSE="|| ( GPL-2 AFL-2.0 )"
-SLOT="0"
-KEYWORDS="~alpha ~amd64 ~hppa ~ia64 ~sparc ~x86"
-
-KERNEL_IUSE="kernel_linux kernel_FreeBSD"
-IUSE="acpi apm crypt debug dell disk-partition doc laptop selinux ${KERNEL_IUSE}"
-
-RDEPEND=">=dev-libs/dbus-glib-0.61
- >=dev-libs/glib-2.14
- >=dev-libs/expat-1.95.8
- >=dev-libs/libusb-0.1.10a
- >=sys-apps/pciutils-2.2.7-r1
- >=dev-util/gperf-3.0.3
- sys-apps/usbutils
- virtual/eject
- amd64? ( >=sys-apps/dmidecode-2.7 )
- dell? ( >=sys-libs/libsmbios-0.13.4 )
- disk-partition? ( >=sys-apps/parted-1.8.0 )
- ia64? ( >=sys-apps/dmidecode-2.7 )
- kernel_linux? (
- >=sys-fs/udev-111
- !>=sys-fs/udev-125
- >=sys-apps/util-linux-2.13
- >=sys-kernel/linux-headers-2.6.19
- crypt? ( >=sys-fs/cryptsetup-1.0.5 )
- )
- kernel_FreeBSD? ( dev-libs/libvolume_id )
- x86? ( >=sys-apps/dmidecode-2.7 )
- selinux? ( sys-libs/libselinux sec-policy/selinux-hal )"
-DEPEND="${RDEPEND}
- dev-util/pkgconfig
- >=dev-util/intltool-0.35
- >=dev-python/pyxf86config-0.3.34-r1
- doc? (
- app-doc/doxygen
- app-text/docbook-sgml-utils
- app-text/xmlto
- dev-libs/libxml2
- )"
-PDEPEND="=app-misc/hal-info-20080310
- !gnome-extra/hal-device-manager
- laptop? ( >=sys-power/pm-utils-0.99.3 )"
-
-## HAL Daemon drops privledges so we need group access to read disks
-HALDAEMON_GROUPS_LINUX="haldaemon,plugdev,disk,cdrom,cdrw,floppy,usb"
-HALDAEMON_GROUPS_FREEBSD="haldaemon,plugdev,operator"
-
-function check_hotplug_net() {
- local CONFIG_CHECK="~HOTPLUG ~NET"
- local WARNING_HOTPLUG="CONFIG_HOTPLUG:\tis not set (required for HAL)\n"
- local WARNING_NET="CONFIG_NET:\tis not set (required for HAL)\n"
- check_extra_config
-}
-
-function check_inotify() {
- local CONFIG_CHECK="~INOTIFY_USER"
- local WARNING_INOTIFY_USER="CONFIG_INOTIFY_USER:\tis not set (required for HAL)\n"
- check_extra_config
-}
-
-function check_acpi_proc() {
- local CONFIG_CHECK="~ACPI_PROCFS ~ACPI_PROC_EVENT"
- local WARNING_ACPI_PROCFS="CONFIG_ACPI_PROCFS:\tis not set (required for HAL)\n"
- local WARNING_ACPI_PROC_EVENT="CONFIG_ACPI_PROC_EVENT:\tis not set (required for HAL)\n"
- check_extra_config
-}
-
-pkg_setup() {
- if use kernel_linux ; then
- if [[ -e "${ROOT}/usr/src/linux/.config" ]] ; then
- kernel_is ge 2 6 19 || ewarn "HAL requires a kernel version 2.6.19 or newer"
-
- if kernel_is lt 2 6 23 && use acpi ; then
- check_acpi_proc
- fi
- fi
-
- check_hotplug_net
- check_inotify
- fi
-
- # http://devmanual.gentoo.org/ebuild-writing/functions/
- # http://bugs.gentoo.org/show_bug.cgi?id=191605
-
- # Create groups for hotplugging and HAL
- enewgroup haldaemon
- enewgroup plugdev
-
- # HAL drops priviledges by default now ...
- # ... so we must make sure it can read disk/cdrom info (ie. be in ${HALDAEMON_GROUPS} groups)
- if use kernel_linux; then
- enewuser haldaemon -1 "-1" /dev/null ${HALDAEMON_GROUPS_LINUX}
- elif use kernel_FreeBSD; then
- enewuser haldaemon -1 "-1" /dev/null ${HALDAEMON_GROUPS_FREEBSD}
- fi
-
- # Make sure that the haldaemon user is in the ${HALDAEMON_GROUPS}
- # If users have a problem with this, let them file a bug
- if [[ ${ROOT} == / ]] ; then
- if use kernel_linux; then
- usermod -G ${HALDAEMON_GROUPS_LINUX} haldaemon
- elif use kernel_FreeBSD; then
- pw usermod haldaemon -G ${HALDAEMON_GROUPS_FREEBSD}
- fi
- fi
-}
-
-S="${WORKDIR}/${PF/_/}"
-
-src_unpack() {
- unpack ${A}
- cd "${S}"
-
- EPATCH_MULTI_MSG="Applying Gentoo Patchset ..." \
- EPATCH_SUFFIX="patch" \
- EPATCH_SOURCE="${WORKDIR}/${P}-patches/" \
- EPATCH_FORCE="yes" \
- epatch
-
- eautoreconf
-}
-
-src_compile() {
- local acpi="$(use_enable acpi)"
- local backend=
- local hardware=
-
- append-flags -rdynamic
-
- if use kernel_linux ; then
- backend="linux"
- elif use kernel_FreeBSD ; then
- backend="freebsd"
- else
- eerror "Invalid backend"
- fi
-
- if use kernel_linux ; then
- if use acpi ; then
- # Using IBM ACPI and Toshiba ACPI results in double notification as this
- # was merged into the Linux Kernel 2.6.22
- if kernel_is lt 2 6 22 ; then
- acpi="$acpi --enable-acpi-ibm --enable-acpi-toshiba"
- else
- acpi="$acpi --disable-acpi-ibm --disable-acpi-toshiba"
- fi
-
- acpi="$acpi --enable-acpi-proc --enable-acpi-acpid"
- else
- acpi="$acpi --disable-acpi-ibm --disable-acpi-toshiba"
- acpi="$acpi --disable-acpi-proc --disable-acpi-acpid"
- fi
-
- hardware="--with-cpufreq --with-usb-csr --with-keymaps"
- use arm && hardware="$hardware --enable-omap"
-
- if use dell ; then
- hardware="$hardware --with-dell-backlight"
- else
- hardware="$hardware --without-dell-backlight"
- fi
- else
- hardware="--without-cpufreq --without-usb-csr --without-keymaps"
- hardware="$hardware --disable-omap"
- hardware="$hardware --without-dell-backlight"
- hardware="$hardware --enable-acpi-ibm --enable-acpi-toshiba"
- fi
-
- econf --with-backend=${backend} \
- --with-os-type=gentoo \
- --with-pid-file=/var/run/hald.pid \
- --with-hwdata=/usr/share/misc \
- --with-socket-dir=/var/run/hald \
- --enable-umount-helper \
- --enable-man-pages \
- --disable-policy-kit \
- --disable-console-kit \
- --disable-acl-management \
- --enable-pci \
- --enable-sonypic \
- $(use_enable apm) \
- $(use_enable arm pmu) \
- $(use_enable arm omap) \
- $(use_enable debug verbose-mode) \
- $(use_enable disk-partition parted) \
- $(use_enable doc docbook-docs) \
- $(use_enable doc doxygen-docs) \
- --docdir=/usr/share/doc/${PF} \
- --localstatedir=/var \
- ${acpi} ${hardware} \
- || die "configure failed"
-
- emake || die "make failed"
-}
-
-src_install() {
- make DESTDIR="${D}" install || die
- dodoc AUTHORS ChangeLog NEWS README
-
- # hal umount for unclean unmounts
- exeinto /lib/udev/
- newexe "${FILESDIR}/hal-unmount.dev" hal_unmount
-
- # initscript
- newinitd "${FILESDIR}/0.5.10-hald.rc" hald
-
- # configuration
- cp "${FILESDIR}/0.5.10-hald.conf" "${WORKDIR}/"
-
- if use debug; then
- sed -e 's:HALD_VERBOSE="no":HALD_VERBOSE="yes":' \
- -i "${WORKDIR}/0.5.10-hald.conf"
- fi
- newconfd "${WORKDIR}/0.5.10-hald.conf" hald
-
- # New Configuration Snippets
- dodoc "${WORKDIR}/${P}-extras/"*.fdi
- dobin "${WORKDIR}/${P}-extras/migrate-xorg-to-fdi.py"
-
- # Authomagic conversion!
- elog "Migrating xorg.conf Core Keyboard configuration to HAL FDI file..."
- "${WORKDIR}/${P}-extras/migrate-xorg-to-fdi.py" 2> /dev/null > "${D}/etc/hal/fdi/policy/10-x11-input.fdi"
-
- # We now create and keep /media here as both gnome-mount and pmount
- # use these directories, to avoid collision.
- keepdir /media
-
- # We also need to create and keep /etc/fdi/{information,policy,preprobe}
- # or else hal bombs.
- keepdir /etc/hal/fdi/{information,policy,preprobe}
-
- # HAL stores it's fdi cache in /var/lib/cache/hald
- keepdir /var/lib/cache/hald
-
- # HAL keeps its unix socket here
- keepdir /var/run/hald
- keepdir /var/lib/hal
-}
-
-pkg_postinst() {
- # Despite what people keep changing this location. Either one works.. it doesn't matter
- # http://dev.gentoo.org/~plasmaroo/devmanual/ebuild-writing/functions/
-
- elog "The HAL daemon needs to be running for certain applications to"
- elog "work. Suggested is to add the init script to your start-up"
- elog "scripts, this should be done like this :"
- elog "\`rc-update add hald default\`"
- echo
- elog "Looking for automounting support? Add yourself to the plugdev group"
- echo
- elog "IF you have additional applications which consume ACPI events, you"
- elog "should consider installing acpid to allow applications to share ACPI"
- elog "events."
- echo
- elog "If you wish to use a non US layout, you may do so by executing:"
- elog "setxkbmap <layout> or by utilizing your Desktop Environment's"
- elog "Keyboard Layout Settings mechanism."
- elog "Under GNOME, this is gnome-keyboard-properties, and under KDE"
- elog "it is kxkb."
- echo
- elog "In order have suspend/hibernate function with HAL or apps that use HAL"
- elog "(such as gnome-power-manager), you should build HAL with the laptop"
- elog "useflag which will install pm-utils."
- echo
- elog "X Input Hotplugging (if you build xorg-server with the HAL useflag)"
- elog "reads user specific configuration from /etc/hal/fdi/policy/."
- if [[ $(cat "${ROOT}etc/hal/fdi/policy/10-x11-input.fdi" | wc -c) -gt 0 ]]
- then
- elog "We have converted your existing xorg.conf rules and the FDI is stored"
- elog "at /etc/hal/fdi/policy/10-x11-input.fdi"
- fi
- elog "You should remove the Input sections from your xorg.conf once you have"
- elog "migrated the rules to a HAL fdi file."
-
- ebeep 5
- epause 5
-}
diff --git a/sys-apps/hal/hal-0.5.7.1-r5.ebuild b/sys-apps/hal/hal-0.5.7.1-r5.ebuild
deleted file mode 100644
index d955a9989c27..000000000000
--- a/sys-apps/hal/hal-0.5.7.1-r5.ebuild
+++ /dev/null
@@ -1,202 +0,0 @@
-# Copyright 1999-2008 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/sys-apps/hal/hal-0.5.7.1-r5.ebuild,v 1.21 2008/12/19 17:37:01 pva Exp $
-
-inherit eutils linux-info
-
-DESCRIPTION="Hardware Abstraction Layer"
-HOMEPAGE="http://www.freedesktop.org/Software/hal"
-SRC_URI="http://freedesktop.org/~david/dist/${P}.tar.gz"
-
-LICENSE="|| ( GPL-2 AFL-2.0 )"
-SLOT="0"
-KEYWORDS="alpha ~amd64 arm hppa ia64 ~ppc ppc64 sh sparc x86"
-IUSE="acpi crypt debug dmi doc pcmcia selinux"
-
-RDEPEND=">=dev-libs/glib-2.6
- >=dev-libs/dbus-glib-0.71
- >=sys-fs/udev-083
- >=sys-apps/util-linux-2.12r
- || ( >=sys-kernel/linux-headers-2.6 >=sys-kernel/mips-headers-2.6 )
- dev-libs/expat
- sys-apps/pciutils
- dev-libs/libusb
- virtual/eject
- dmi? ( >=sys-apps/dmidecode-2.7 )
- crypt? ( >=sys-fs/cryptsetup-1.0.5 )
- selinux? ( sys-libs/libselinux )"
-
-DEPEND="${RDEPEND}
- dev-util/pkgconfig
- >=dev-util/intltool-0.29
- doc? ( app-doc/doxygen app-text/docbook-sgml-utils )"
-
-## HAL Daemon drops privledges so we need group access to read disks
-HALDAEMON_GROUPS="haldaemon,plugdev,disk,cdrom,cdrw,floppy,usb"
-
-function check_uevent() {
- local CONFIG_CHECK="~KOBJECT_UEVENT"
- local WARNING_KOBJECT_UEVENT="CONFIG_KOBJECT_UEVENT:\tis not set (required for HAL)
-"
- check_extra_config
-}
-
-function check_hotplug_net() {
- local CONFIG_CHECK="~HOTPLUG ~NET"
- local WARNING_HOTPLUG="CONFIG_HOTPLUG:\tis not set (required for HAL)
-"
- local WARNING_NET="CONFIG_NET:\tis not set (required for HAL)
-"
- check_extra_config
-}
-
-function check_procfs() {
- local CONFIG_CHECK="~PROC_FS"
- local WARNING_PROC_FS="CONFIG_PROC_FS:\tis not set (required for HAL)
-"
- check_extra_config
-}
-
-pkg_setup() {
- if ! built_with_use --missing true sys-apps/pciutils hal ; then
- if built_with_use --missing false sys-apps/pciutils zlib ; then
- die "You MUST build sys-apps/pciutils without the zlib USE flag"
- fi
- fi
-
- if [ -e "${ROOT}/usr/src/linux/.config" ] ; then
- if kernel_is ge 2 6 16 ; then
- check_hotplug_net
- elif kernel_is eq 2 6 15 ; then
- check_uevent
- else
- ewarn "HAL requires a kernel version 2.6.15 or newer"
- fi
- fi
-
- use acpi && check_procfs
-
- if [ -d "${ROOT}/etc/hal/device.d" ]; then
- eerror "HAL 0.5.x will not run with the HAL 0.4.x series of"
- eerror "/etc/hal/device.d/ so please remove this directory"
- eerror "with rm -rf /etc/hal/device.d/ and then re-emerge."
- eerror "This is due to configuration protection of /etc/"
- die "remove /etc/hal/device.d/"
- fi
-}
-
-src_unpack() {
- unpack ${A}
- cd "${S}"
-
- # handle ignored volumes properly
- epatch "${FILESDIR}"/${PN}-0.5.7.1-ignored-volumes.patch
-
- # Fix bash in hald scripts
- epatch "${FILESDIR}"/${PN}-0.5.7.1-hald-scripts.patch
-
- # probe partition table
- epatch "${FILESDIR}"/${PN}-0.5.7-part-table.patch
-
- # fix pmu support crash
- epatch "${FILESDIR}"/${PN}-0.5.7-pmu-fix.patch
-
- # unclean unmount
- epatch "${FILESDIR}"/${PN}-0.5.7-unclean-unmount-r1.patch
-
- # allow plugdev group people to mount
- epatch "${FILESDIR}"/${PN}-0.5.7-plugdev-allow-send.patch
-
- # rescan devices on resume
- epatch "${FILESDIR}"/${PN}-0.5.7.1-rescan-on-resume.patch
-
- # dbus deprecated dbus_connection_disconnect
- epatch "${FILESDIR}"/${PN}-0.5.7.1-dbus-close.patch
-
- # sr driver fix
- epatch "${FILESDIR}"/${PN}-0.5.7.1-sr-driver.patch
-
- # mounting autofs & subfs fixes
- epatch "${FILESDIR}"/${PN}-0.5.7.1-autofs-subfs.patch
-
- # iPod Nano detected as RAID fix
- epatch "${FILESDIR}"/${PN}-0.5.7.1-ipod-nano.patch
-
- # Floppies mounting fix
- epatch "${FILESDIR}"/${PN}-0.5.7.1-floppies-fix.patch
-
- # fix undeclared ctype.h so everyone can stop getting their panties in a
- # bundle
- epatch "${FILESDIR}"/${PN}-0.5.7.1-ctype-fix.patch
-
- # fix for dbus close/unref so we stop having errors from lshal about D-Bus
- epatch "${FILESDIR}"/${PN}-0.5.7.1-fix-dbus.patch
-
- # Fix for fdi issues with indirection problem in copy_property
- # All work by Martin "Parmus" Parm <parmus@diku.dk
- # passed upstream as fd.o bug #9849
- epatch "${FILESDIR}"/${PN}-0.5.7.1-indirection-fix.patch
-}
-
-src_compile() {
-
- econf \
- --with-doc-dir=/usr/share/doc/${PF} \
- --with-os-type=gentoo \
- --with-pid-file=/var/run/hald.pid \
- --with-hwdata=/usr/share/misc \
- --enable-hotplug-map \
- $(use_enable debug verbose-mode) \
- $(use_enable pcmcia pcmcia-support) \
- $(use_enable acpi acpi-proc) \
- $(use_enable doc docbook-docs) \
- $(use_enable doc doxygen-docs) \
- $(use_enable selinux) \
- || die "configure failed"
-
- emake || die "make failed"
-}
-
-src_install() {
- make DESTDIR="${D}" install || die
- dodoc AUTHORS ChangeLog NEWS README
-
- # remove dep on gnome-python
- mv "${D}"/usr/bin/hal-device-manager "${D}"/usr/share/hal/device-manager/
-
- # hal umount for unclean unmounts
- exeinto /lib/udev/
- newexe "${FILESDIR}"/hal-unmount.dev hal_unmount
-
- # initscript
- newinitd "${FILESDIR}"/0.5-hald.rc hald
-
- # We now create and keep /media here as both gnome-mount and pmount
- # use these directories, to avoid collision.
- dodir /media
- keepdir /media
-}
-
-pkg_postinst() {
- # Despite what people keep changing this location. Either one works.. it doesn't matter
- # http://dev.gentoo.org/~plasmaroo/devmanual/ebuild-writing/functions/
-
- # Create groups for hotplugging and HAL
- enewgroup haldaemon
- enewgroup plugdev
-
- # HAL drops priviledges by default now ...
- # ... so we must make sure it can read disk/cdrom info (ie. be in ${HALDAEMON_GROUPS} groups)
- enewuser haldaemon -1 "-1" /dev/null ${HALDAEMON_GROUPS}
-
- # Make sure that the haldaemon user is in the ${HALDAEMON_GROUPS}
- # If users have a problem with this, let them file a bug
- usermod -G ${HALDAEMON_GROUPS} haldaemon
-
- elog "The HAL daemon needs to be running for certain applications to"
- elog "work. Suggested is to add the init script to your start-up"
- elog "scripts, this should be done like this :"
- elog "\`rc-update add hald default\`"
- echo
- elog "Looking for automounting support? Add yourself to the plugdev group"
-}
diff --git a/sys-apps/hal/hal-0.5.9-r1.ebuild b/sys-apps/hal/hal-0.5.9-r1.ebuild
deleted file mode 100644
index ff4d4409862c..000000000000
--- a/sys-apps/hal/hal-0.5.9-r1.ebuild
+++ /dev/null
@@ -1,249 +0,0 @@
-# Copyright 1999-2008 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/sys-apps/hal/hal-0.5.9-r1.ebuild,v 1.23 2008/12/19 17:37:01 pva Exp $
-
-inherit eutils linux-info autotools flag-o-matic
-
-DESCRIPTION="Hardware Abstraction Layer"
-HOMEPAGE="http://www.freedesktop.org/Software/hal"
-SRC_URI="http://people.freedesktop.org/~david/dist/${P}.tar.gz"
-
-LICENSE="|| ( GPL-2 AFL-2.0 )"
-SLOT="0"
-KEYWORDS="amd64 arm ~hppa ia64 -mips ppc -ppc64 sh ~sparc x86 ~x86-fbsd"
-
-KERNEL_IUSE="kernel_linux kernel_FreeBSD"
-IUSE="acpi crypt debug dell disk-partition doc pcmcia selinux ${KERNEL_IUSE}"
-
-RDEPEND=">=dev-libs/glib-2.6
- >=dev-libs/dbus-glib-0.61
- kernel_linux? ( >=sys-fs/udev-104 )
- kernel_linux? ( >=sys-apps/util-linux-2.12r-r1 )
- kernel_linux? ( >=sys-kernel/linux-headers-2.6.17 )
- kernel_FreeBSD? ( dev-libs/libvolume_id )
- >=dev-libs/expat-1.95.8
- >=sys-apps/pciutils-2.2.3
- >=dev-libs/libusb-0.1.10a
- sys-apps/usbutils
- virtual/eject
- amd64? ( >=sys-apps/dmidecode-2.7 )
- x86? ( >=sys-apps/dmidecode-2.7 )
- ia64? ( >=sys-apps/dmidecode-2.7 )
- dell? ( >=sys-libs/libsmbios-0.13.4 )
- disk-partition? ( <=sys-apps/parted-1.8.6 )
- kernel_linux? ( crypt? ( >=sys-fs/cryptsetup-1.0.5 ) )
- selinux? ( sys-libs/libselinux
- sec-policy/selinux-hal )"
-# pam? ( sys-auth/consolekit )"
-
-DEPEND="${RDEPEND}
- dev-util/pkgconfig
- >=dev-util/intltool-0.35
- doc? ( app-doc/doxygen
- app-text/docbook-sgml-utils
- app-text/xmlto )"
-
-PDEPEND="app-misc/hal-info"
-
-## HAL Daemon drops privledges so we need group access to read disks
-HALDAEMON_GROUPS_LINUX="haldaemon,plugdev,disk,cdrom,cdrw,floppy,usb"
-HALDAEMON_GROUPS_FREEBSD="haldaemon,plugdev,operator"
-
-function check_hotplug_net() {
- local CONFIG_CHECK="~HOTPLUG ~NET"
- local WARNING_HOTPLUG="CONFIG_HOTPLUG:\tis not set (required for HAL)
-"
- local WARNING_NET="CONFIG_NET:\tis not set (required for HAL)
-"
- check_extra_config
-}
-
-function check_inotify() {
- local CONFIG_CHECK="~INOTIFY_USER"
- local WARNING_INOTIFY_USER="CONFIG_INOTIFY_USER:\tis not set (required for HAL)
-"
- check_extra_config
-}
-
-function check_procfs() {
- local CONFIG_CHECK="~PROC_FS"
- local WARNING_PROC_FS="CONFIG_PROC_FS:\tis not set (required for HAL)
-"
- check_extra_config
-}
-
-pkg_setup() {
- if ! built_with_use --missing true sys-apps/pciutils hal ; then
- if built_with_use --missing false sys-apps/pciutils zlib ; then
- die "You MUST build sys-apps/pciutils without the zlib USE flag"
- fi
- fi
-
- if use kernel_linux ; then
- if [ -e "${ROOT}/usr/src/linux/.config" ] ; then
- kernel_is ge 2 6 17 || \
- ewarn "HAL requires a kernel version 2.6.17 or newer"
- fi
-
- check_hotplug_net
- check_inotify
- use acpi && check_procfs
- fi
-
- if [[ -d ${ROOT}/etc/hal/device.d ]]; then
- eerror "HAL 0.5.x will not run with the HAL 0.4.x series of"
- eerror "/etc/hal/device.d/ so please remove this directory"
- eerror "with rm -rf /etc/hal/device.d/ and then re-emerge."
- eerror "This is due to configuration protection of /etc/"
- die "remove /etc/hal/device.d/"
- fi
-}
-
-src_unpack() {
- unpack ${A}
- cd "${S}"
-
- # Patches accepted upstream
- epatch "${FILESDIR}/${PV}/01_luks_mount_fix.patch"
- epatch "${FILESDIR}/${PV}/02_acpi_repeated_property_change.patch"
- epatch "${FILESDIR}/${PV}/03_crasher_fix_fail_to_return_value.patch"
- epatch "${FILESDIR}/${PV}/04_cache_regen_return_fix.patch"
- epatch "${FILESDIR}/${PV}/05_freebsd_partutil_make_fix.patch"
- epatch "${FILESDIR}/${PV}/06_freebsd_backend_fix.patch"
- epatch "${FILESDIR}/${PV}/07_malloc_h_for_stdlib_h.patch"
- epatch "${FILESDIR}/${PV}/08_contains_not_fdi_directive.patch"
- epatch "${FILESDIR}/${PV}/09_hald_addon_keyboard_start_one.patch"
- epatch "${FILESDIR}/${PV}/10_freebsd_storage_reprobe_fix.patch"
- epatch "${FILESDIR}/${PV}/11_hal_fix_segfault_probe_volume.patch"
- epatch "${FILESDIR}/${PV}/12_hal_fix-vol_label_probe_volume.patch"
- epatch "${FILESDIR}/${PV}/13_detect_newer_macbooks.patch"
- epatch "${FILESDIR}/${PV}/14_ntfs_allows_utf8.patch"
- epatch "${FILESDIR}/${PV}/15_spec_fdi_matching.patch"
- epatch "${FILESDIR}/${PV}/16_dev_root_is_mounted.patch"
- epatch "${FILESDIR}/${PV}/18_hal_fix_info.category_for_laptop_panel_v2.patch"
- epatch "${FILESDIR}/${PV}/19_hald_runner_catch_dbus_disconnect.patch"
-
- # Gentoo patchset
- epatch "${FILESDIR}/${PV}/95_gentoo_man_page.patch"
- epatch "${FILESDIR}/${PV}/96_plugdev_allow_send.patch"
- epatch "${FILESDIR}/${PV}/97_ignore_fixed_drives.patch"
- epatch "${FILESDIR}/${PV}/98_hald_cache_test_path.patch"
-
- eautoreconf
-}
-
-src_compile() {
- local backend=""
- local acpi=""
-
- # TODO :: policykit should have a pam useflag
- append-flags -rdynamic
-
- if use kernel_linux ; then
- backend="linux"
- use acpi && acpi="--enable-acpi-toshiba --enable-acpi-ibm"
- elif use kernel_FreeBSD ; then
- backend="freebsd"
- else
- eerror "Invalid backend"
- fi
-
- if ! use acpi ; then
- acpi="--disable-acpi-proc --disable-acpi-acpid"
- fi
-
- econf --disable-policy-kit \
- --docdir=/usr/share/doc/${PF} \
- --with-os-type=gentoo \
- --with-pid-file=/var/run/hald.pid \
- --with-socket-dir=/var/run/hald \
- --with-hwdata=/usr/share/misc \
- --enable-hotplug-map \
- --enable-man-pages \
- --with-backend=${backend} \
- $(use_enable debug verbose-mode) \
- $(use_with dell dell-backlight) \
- $(use_enable disk-partition parted) \
- $(use_enable pcmcia pcmcia-support) \
- $(use_enable doc docbook-docs) \
- $(use_enable doc doxygen-docs) \
- $(use_enable selinux) \
- --disable-console-kit \
- ${acpi} \
- || die "configure failed"
-#$(use_enable pam console-kit)
-
- emake || die "make failed"
-}
-
-src_install() {
- make DESTDIR="${D}" install || die
- dodoc AUTHORS ChangeLog NEWS README
-
- # remove dep on gnome-python
- mv "${D}"/usr/bin/hal-device-manager "${D}"/usr/share/hal/device-manager/
-
- # hal umount for unclean unmounts
- exeinto /lib/udev/
- newexe "${FILESDIR}"/hal-unmount.dev hal_unmount
-
- # initscript
- newinitd "${FILESDIR}"/0.5.9-hald.rc hald
- cp "${FILESDIR}"/0.5.9-hald.conf "${WORKDIR}"/
-# if use pam; then
-# sed -e 's:RC_NEED="":RC_NEED="consolekit":' -i "${WORKDIR}"/0.5.9-hald.conf
-# fi
- if use debug; then
- sed -e 's:HALD_VERBOSE="no":HALD_VERBOSE="yes":' \
- -i "${WORKDIR}"/0.5.9-hald.conf
- fi
- newconfd "${WORKDIR}"/0.5.9-hald.conf hald
-
- # We now create and keep /media here as both gnome-mount and pmount
- # use these directories, to avoid collision.
- keepdir /media
-
- # We also need to create and keep /etc/fdi/{information,policy,preprobe}
- # or else hal bombs.
- keepdir /etc/hal/fdi/{information,policy,preprobe}
-
- # HAL stores it's fdi cache in /var/lib/cache/hald
- keepdir /var/lib/cache/hald
-
- # HAL keeps its unix socket here
- keepdir /var/run/hald
-}
-
-pkg_postinst() {
- # Despite what people keep changing this location. Either one works.. it doesn't matter
- # http://dev.gentoo.org/~plasmaroo/devmanual/ebuild-writing/functions/
-
- # Create groups for hotplugging and HAL
- enewgroup haldaemon
- enewgroup plugdev
-
- # HAL drops priviledges by default now ...
- # ... so we must make sure it can read disk/cdrom info (ie. be in ${HALDAEMON_GROUPS} groups)
- if use kernel_linux; then
- enewuser haldaemon -1 "-1" /dev/null ${HALDAEMON_GROUPS_LINUX}
- elif use kernel_FreeBSD; then
- enewuser haldaemon -1 "-1" /dev/null ${HALDAEMON_GROUPS_FREEBSD}
- fi
-
- # Make sure that the haldaemon user is in the ${HALDAEMON_GROUPS}
- # If users have a problem with this, let them file a bug
- if [[ ${ROOT} == / ]] ; then
- if use kernel_linux; then
- usermod -G ${HALDAEMON_GROUPS_LINUX} haldaemon
- elif use kernel_FreeBSD; then
- pw usermod haldaemon -G ${HALDAEMON_GROUPS_FREEBSD}
- fi
- fi
-
- elog "The HAL daemon needs to be running for certain applications to"
- elog "work. Suggested is to add the init script to your start-up"
- elog "scripts, this should be done like this :"
- elog "\`rc-update add hald default\`"
- echo
- elog "Looking for automounting support? Add yourself to the plugdev group"
-}
diff --git a/sys-apps/hal/hal-0.5.9.1-r1.ebuild b/sys-apps/hal/hal-0.5.9.1-r1.ebuild
deleted file mode 100644
index d1767e5ab2e3..000000000000
--- a/sys-apps/hal/hal-0.5.9.1-r1.ebuild
+++ /dev/null
@@ -1,233 +0,0 @@
-# Copyright 1999-2008 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/sys-apps/hal/hal-0.5.9.1-r1.ebuild,v 1.15 2008/12/19 17:37:01 pva Exp $
-
-inherit eutils linux-info autotools flag-o-matic
-
-DESCRIPTION="Hardware Abstraction Layer"
-HOMEPAGE="http://www.freedesktop.org/Software/hal"
-SRC_URI="http://people.freedesktop.org/~david/dist/${P}.tar.gz"
-
-LICENSE="|| ( GPL-2 AFL-2.0 )"
-SLOT="0"
-KEYWORDS="alpha ~amd64 ~arm hppa ~ia64 -mips ~ppc -ppc64 ~sh sparc ~x86 ~x86-fbsd"
-
-KERNEL_IUSE="kernel_linux kernel_FreeBSD"
-IUSE="acpi crypt debug dell disk-partition doc pcmcia selinux ${KERNEL_IUSE}"
-
-RDEPEND=">=dev-libs/glib-2.6
- >=dev-libs/dbus-glib-0.61
- kernel_linux? ( >=sys-fs/udev-104 )
- kernel_linux? ( >=sys-apps/util-linux-2.12r-r1 )
- kernel_linux? ( >=sys-kernel/linux-headers-2.6.17 )
- kernel_FreeBSD? ( dev-libs/libvolume_id )
- >=dev-libs/expat-1.95.8
- >=sys-apps/pciutils-2.2.3
- >=dev-libs/libusb-0.1.10a
- sys-apps/usbutils
- virtual/eject
- amd64? ( >=sys-apps/dmidecode-2.7 )
- x86? ( >=sys-apps/dmidecode-2.7 )
- ia64? ( >=sys-apps/dmidecode-2.7 )
- dell? ( >=sys-libs/libsmbios-0.13.4 )
- disk-partition? ( <=sys-apps/parted-1.8.7 )
- kernel_linux? ( crypt? ( >=sys-fs/cryptsetup-1.0.5 ) )
- selinux? ( sys-libs/libselinux
- sec-policy/selinux-hal )"
-# pam? ( sys-auth/consolekit )"
-
-DEPEND="${RDEPEND}
- dev-util/pkgconfig
- >=dev-util/intltool-0.35
- doc? ( app-doc/doxygen
- app-text/docbook-sgml-utils
- app-text/xmlto )"
-
-PDEPEND="app-misc/hal-info"
-
-## HAL Daemon drops privledges so we need group access to read disks
-HALDAEMON_GROUPS_LINUX="haldaemon,plugdev,disk,cdrom,cdrw,floppy,usb"
-HALDAEMON_GROUPS_FREEBSD="haldaemon,plugdev,operator"
-
-function check_hotplug_net() {
- local CONFIG_CHECK="~HOTPLUG ~NET"
- local WARNING_HOTPLUG="CONFIG_HOTPLUG:\tis not set (required for HAL)
-"
- local WARNING_NET="CONFIG_NET:\tis not set (required for HAL)
-"
- check_extra_config
-}
-
-function check_inotify() {
- local CONFIG_CHECK="~INOTIFY_USER"
- local WARNING_INOTIFY_USER="CONFIG_INOTIFY_USER:\tis not set (required for HAL)
-"
- check_extra_config
-}
-
-function check_procfs() {
- local CONFIG_CHECK="~PROC_FS"
- local WARNING_PROC_FS="CONFIG_PROC_FS:\tis not set (required for HAL)
-"
- check_extra_config
-}
-
-pkg_setup() {
- if ! built_with_use --missing true sys-apps/pciutils hal ; then
- if built_with_use --missing false sys-apps/pciutils zlib ; then
- die "You MUST build sys-apps/pciutils without the zlib USE flag"
- fi
- fi
-
- if use kernel_linux ; then
- if [ -e "${ROOT}/usr/src/linux/.config" ] ; then
- kernel_is ge 2 6 17 || \
- ewarn "HAL requires a kernel version 2.6.17 or newer"
- fi
-
- check_hotplug_net
- check_inotify
- use acpi && check_procfs
- fi
-
- if [[ -d ${ROOT}/etc/hal/device.d ]]; then
- eerror "HAL 0.5.x will not run with the HAL 0.4.x series of"
- eerror "/etc/hal/device.d/ so please remove this directory"
- eerror "with rm -rf /etc/hal/device.d/ and then re-emerge."
- eerror "This is due to configuration protection of /etc/"
- die "remove /etc/hal/device.d/"
- fi
-}
-
-src_unpack() {
- unpack ${A}
- cd "${S}"
-
- # Gentoo patchset
- epatch "${FILESDIR}/0.5.9/07_malloc_h_for_stdlib_h.patch"
- epatch "${FILESDIR}/0.5.9/23_runner_64bit_values.patch"
- epatch "${FILESDIR}/0.5.9/24_libparted_1_8_7.patch"
- #epatch ${FILESDIR}/0.5.9/95_gentoo_man_page.patch
- epatch "${FILESDIR}/0.5.9/96_plugdev_allow_send.patch"
- epatch "${FILESDIR}/0.5.9/97_ignore_fixed_drives.patch"
- epatch "${FILESDIR}/0.5.9/98_hald_cache_test_path.patch"
- epatch "${FILESDIR}/0.5.9/99_sun_disklabel_ignore.patch"
-
- eautoreconf
-}
-
-src_compile() {
- local backend=""
- local acpi=""
-
- # TODO :: policykit should have a pam useflag
- append-flags -rdynamic
-
- if use kernel_linux ; then
- backend="linux"
- use acpi && acpi="--enable-acpi-toshiba --enable-acpi-ibm"
- elif use kernel_FreeBSD ; then
- backend="freebsd"
- else
- eerror "Invalid backend"
- fi
-
- if ! use acpi ; then
- acpi="--disable-acpi-proc --disable-acpi-acpid"
- fi
-
- econf --disable-policy-kit \
- --docdir=/usr/share/doc/${PF} \
- --with-os-type=gentoo \
- --with-pid-file=/var/run/hald.pid \
- --with-socket-dir=/var/run/hald \
- --with-hwdata=/usr/share/misc \
- --enable-hotplug-map \
- --enable-man-pages \
- --with-backend=${backend} \
- $(use_enable debug verbose-mode) \
- $(use_with dell dell-backlight) \
- $(use_enable disk-partition parted) \
- $(use_enable pcmcia pcmcia-support) \
- $(use_enable doc docbook-docs) \
- $(use_enable doc doxygen-docs) \
- $(use_enable selinux) \
- --disable-console-kit \
- ${acpi} \
- || die "configure failed"
-#$(use_enable pam console-kit)
-
- emake || die "make failed"
-}
-
-src_install() {
- make DESTDIR="${D}" install || die
- dodoc AUTHORS ChangeLog NEWS README
-
- # remove dep on gnome-python
- mv "${D}"/usr/bin/hal-device-manager "${D}"/usr/share/hal/device-manager/
-
- # hal umount for unclean unmounts
- exeinto /lib/udev/
- newexe "${FILESDIR}"/hal-unmount.dev hal_unmount
-
- # initscript
- newinitd "${FILESDIR}"/0.5.9-hald.rc hald
- cp "${FILESDIR}"/0.5.9-hald.conf "${WORKDIR}"/
-# if use pam; then
-# sed -e 's:RC_NEED="":RC_NEED="consolekit":' -i "${WORKDIR}"/0.5.9-hald.conf
-# fi
- if use debug; then
- sed -e 's:HALD_VERBOSE="no":HALD_VERBOSE="yes":' \
- -i "${WORKDIR}"/0.5.9-hald.conf
- fi
- newconfd "${WORKDIR}"/0.5.9-hald.conf hald
-
- # We now create and keep /media here as both gnome-mount and pmount
- # use these directories, to avoid collision.
- keepdir /media
-
- # We also need to create and keep /etc/fdi/{information,policy,preprobe}
- # or else hal bombs.
- keepdir /etc/hal/fdi/{information,policy,preprobe}
-
- # HAL stores it's fdi cache in /var/lib/cache/hald
- keepdir /var/lib/cache/hald
-
- # HAL keeps its unix socket here
- keepdir /var/run/hald
-}
-
-pkg_postinst() {
- # Despite what people keep changing this location. Either one works.. it doesn't matter
- # http://dev.gentoo.org/~plasmaroo/devmanual/ebuild-writing/functions/
-
- # Create groups for hotplugging and HAL
- enewgroup haldaemon
- enewgroup plugdev
-
- # HAL drops priviledges by default now ...
- # ... so we must make sure it can read disk/cdrom info (ie. be in ${HALDAEMON_GROUPS} groups)
- if use kernel_linux; then
- enewuser haldaemon -1 "-1" /dev/null ${HALDAEMON_GROUPS_LINUX}
- elif use kernel_FreeBSD; then
- enewuser haldaemon -1 "-1" /dev/null ${HALDAEMON_GROUPS_FREEBSD}
- fi
-
- # Make sure that the haldaemon user is in the ${HALDAEMON_GROUPS}
- # If users have a problem with this, let them file a bug
- if [[ ${ROOT} == / ]] ; then
- if use kernel_linux; then
- usermod -G ${HALDAEMON_GROUPS_LINUX} haldaemon
- elif use kernel_FreeBSD; then
- pw usermod haldaemon -G ${HALDAEMON_GROUPS_FREEBSD}
- fi
- fi
-
- elog "The HAL daemon needs to be running for certain applications to"
- elog "work. Suggested is to add the init script to your start-up"
- elog "scripts, this should be done like this :"
- elog "\`rc-update add hald default\`"
- echo
- elog "Looking for automounting support? Add yourself to the plugdev group"
-}
diff --git a/sys-apps/hal/hal-0.5.9.1-r2.ebuild b/sys-apps/hal/hal-0.5.9.1-r2.ebuild
deleted file mode 100644
index 4ed7b01b15d4..000000000000
--- a/sys-apps/hal/hal-0.5.9.1-r2.ebuild
+++ /dev/null
@@ -1,228 +0,0 @@
-# Copyright 1999-2008 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/sys-apps/hal/hal-0.5.9.1-r2.ebuild,v 1.8 2008/12/19 17:37:01 pva Exp $
-
-inherit eutils linux-info autotools flag-o-matic
-
-DESCRIPTION="Hardware Abstraction Layer"
-HOMEPAGE="http://www.freedesktop.org/Software/hal"
-SRC_URI="http://people.freedesktop.org/~david/dist/${P}.tar.gz
- http://dev.gentoo.org/~cardoe/files/hal/${PN}-${PVR}.tar.bz2"
-
-LICENSE="|| ( GPL-2 AFL-2.0 )"
-SLOT="0"
-KEYWORDS="~alpha ~amd64 ~arm ~hppa ~ia64 -mips ~ppc -ppc64 ~sh ~sparc ~x86 ~x86-fbsd"
-
-KERNEL_IUSE="kernel_linux kernel_FreeBSD"
-IUSE="acpi crypt debug dell disk-partition doc pcmcia selinux ${KERNEL_IUSE}"
-
-RDEPEND=">=dev-libs/glib-2.6
- >=dev-libs/dbus-glib-0.61
- kernel_linux? ( >=sys-fs/udev-104 )
- kernel_linux? ( >=sys-apps/util-linux-2.12r-r1 )
- kernel_linux? ( >=sys-kernel/linux-headers-2.6.17 )
- kernel_FreeBSD? ( dev-libs/libvolume_id )
- >=dev-libs/expat-1.95.8
- >=sys-apps/pciutils-2.2.3
- >=dev-libs/libusb-0.1.10a
- sys-apps/usbutils
- virtual/eject
- amd64? ( >=sys-apps/dmidecode-2.7 )
- x86? ( >=sys-apps/dmidecode-2.7 )
- ia64? ( >=sys-apps/dmidecode-2.7 )
- dell? ( >=sys-libs/libsmbios-0.13.4 )
- disk-partition? ( <=sys-apps/parted-1.8.7 )
- kernel_linux? ( crypt? ( >=sys-fs/cryptsetup-1.0.5 ) )
- selinux? ( sys-libs/libselinux
- sec-policy/selinux-hal )"
-# pam? ( sys-auth/consolekit )"
-
-DEPEND="${RDEPEND}
- dev-util/pkgconfig
- >=dev-util/intltool-0.35
- doc? ( app-doc/doxygen
- app-text/docbook-sgml-utils
- app-text/xmlto )"
-
-PDEPEND="app-misc/hal-info"
-
-## HAL Daemon drops privledges so we need group access to read disks
-HALDAEMON_GROUPS_LINUX="haldaemon,plugdev,disk,cdrom,cdrw,floppy,usb"
-HALDAEMON_GROUPS_FREEBSD="haldaemon,plugdev,operator"
-
-function check_hotplug_net() {
- local CONFIG_CHECK="~HOTPLUG ~NET"
- local WARNING_HOTPLUG="CONFIG_HOTPLUG:\tis not set (required for HAL)
-"
- local WARNING_NET="CONFIG_NET:\tis not set (required for HAL)
-"
- check_extra_config
-}
-
-function check_inotify() {
- local CONFIG_CHECK="~INOTIFY_USER"
- local WARNING_INOTIFY_USER="CONFIG_INOTIFY_USER:\tis not set (required for HAL)
-"
- check_extra_config
-}
-
-function check_procfs() {
- local CONFIG_CHECK="~PROC_FS"
- local WARNING_PROC_FS="CONFIG_PROC_FS:\tis not set (required for HAL)
-"
- check_extra_config
-}
-
-pkg_setup() {
- if ! built_with_use --missing true sys-apps/pciutils hal ; then
- if built_with_use --missing false sys-apps/pciutils zlib ; then
- die "You MUST build sys-apps/pciutils without the zlib USE flag"
- fi
- fi
-
- if use kernel_linux ; then
- if [ -e "${ROOT}/usr/src/linux/.config" ] ; then
- kernel_is ge 2 6 17 || \
- ewarn "HAL requires a kernel version 2.6.17 or newer"
- fi
-
- check_hotplug_net
- check_inotify
- use acpi && check_procfs
- fi
-
- if [[ -d ${ROOT}/etc/hal/device.d ]]; then
- eerror "HAL 0.5.x will not run with the HAL 0.4.x series of"
- eerror "/etc/hal/device.d/ so please remove this directory"
- eerror "with rm -rf /etc/hal/device.d/ and then re-emerge."
- eerror "This is due to configuration protection of /etc/"
- die "remove /etc/hal/device.d/"
- fi
-}
-
-src_unpack() {
- unpack ${A}
- cd "${S}"
-
- EPATCH_SUFFIX="patch" \
- EPATCH_FORCE="yes" \
- epatch "${WORKDIR}"/hal-patches
-
- eautoreconf
-}
-
-src_compile() {
- local backend=""
- local acpi=""
-
- # TODO :: policykit should have a pam useflag
- append-flags -rdynamic
-
- if use kernel_linux ; then
- backend="linux"
- use acpi && acpi="--enable-acpi-toshiba --enable-acpi-ibm"
- elif use kernel_FreeBSD ; then
- backend="freebsd"
- else
- eerror "Invalid backend"
- fi
-
- if ! use acpi ; then
- acpi="--disable-acpi-proc --disable-acpi-acpid"
- fi
-
- econf --disable-policy-kit \
- --docdir=/usr/share/doc/${PF} \
- --with-os-type=gentoo \
- --with-pid-file=/var/run/hald.pid \
- --with-socket-dir=/var/run/hald \
- --with-hwdata=/usr/share/misc \
- --enable-hotplug-map \
- --enable-man-pages \
- --with-backend=${backend} \
- $(use_enable debug verbose-mode) \
- $(use_with dell dell-backlight) \
- $(use_enable disk-partition parted) \
- $(use_enable pcmcia pcmcia-support) \
- $(use_enable doc docbook-docs) \
- $(use_enable doc doxygen-docs) \
- $(use_enable selinux) \
- --disable-console-kit \
- ${acpi} \
- || die "configure failed"
-#$(use_enable pam console-kit)
-
- emake || die "make failed"
-}
-
-src_install() {
- make DESTDIR="${D}" install || die
- dodoc AUTHORS ChangeLog NEWS README
-
- # remove dep on gnome-python
- mv "${D}"/usr/bin/hal-device-manager "${D}"/usr/share/hal/device-manager/
-
- # hal umount for unclean unmounts
- exeinto /lib/udev/
- newexe "${FILESDIR}"/hal-unmount.dev hal_unmount
-
- # initscript
- newinitd "${FILESDIR}"/0.5.9-hald.rc hald
- cp "${FILESDIR}"/0.5.9-hald.conf "${WORKDIR}"/
-# if use pam; then
-# sed -e 's:RC_NEED="":RC_NEED="consolekit":' -i "${WORKDIR}"/0.5.9-hald.conf
-# fi
- if use debug; then
- sed -e 's:HALD_VERBOSE="no":HALD_VERBOSE="yes":' \
- -i "${WORKDIR}"/0.5.9-hald.conf
- fi
- newconfd "${WORKDIR}"/0.5.9-hald.conf hald
-
- # We now create and keep /media here as both gnome-mount and pmount
- # use these directories, to avoid collision.
- keepdir /media
-
- # We also need to create and keep /etc/fdi/{information,policy,preprobe}
- # or else hal bombs.
- keepdir /etc/hal/fdi/{information,policy,preprobe}
-
- # HAL stores it's fdi cache in /var/lib/cache/hald
- keepdir /var/lib/cache/hald
-
- # HAL keeps its unix socket here
- keepdir /var/run/hald
-}
-
-pkg_postinst() {
- # Despite what people keep changing this location. Either one works.. it doesn't matter
- # http://dev.gentoo.org/~plasmaroo/devmanual/ebuild-writing/functions/
-
- # Create groups for hotplugging and HAL
- enewgroup haldaemon
- enewgroup plugdev
-
- # HAL drops priviledges by default now ...
- # ... so we must make sure it can read disk/cdrom info (ie. be in ${HALDAEMON_GROUPS} groups)
- if use kernel_linux; then
- enewuser haldaemon -1 "-1" /dev/null ${HALDAEMON_GROUPS_LINUX}
- elif use kernel_FreeBSD; then
- enewuser haldaemon -1 "-1" /dev/null ${HALDAEMON_GROUPS_FREEBSD}
- fi
-
- # Make sure that the haldaemon user is in the ${HALDAEMON_GROUPS}
- # If users have a problem with this, let them file a bug
- if [[ ${ROOT} == / ]] ; then
- if use kernel_linux; then
- usermod -G ${HALDAEMON_GROUPS_LINUX} haldaemon
- elif use kernel_FreeBSD; then
- pw usermod haldaemon -G ${HALDAEMON_GROUPS_FREEBSD}
- fi
- fi
-
- elog "The HAL daemon needs to be running for certain applications to"
- elog "work. Suggested is to add the init script to your start-up"
- elog "scripts, this should be done like this :"
- elog "\`rc-update add hald default\`"
- echo
- elog "Looking for automounting support? Add yourself to the plugdev group"
-}