1 files changed, 259 insertions, 0 deletions
diff --git a/net-print/hplip/hplip-3.10.2-r2.ebuild b/net-print/hplip/hplip-3.10.2-r2.ebuild
new file mode 100644
index 000000000000..495d20099a2e
--- /dev/null
+++ b/net-print/hplip/hplip-3.10.2-r2.ebuild
@@ -0,0 +1,259 @@
+# Copyright 1999-2010 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/net-print/hplip/hplip-3.10.2-r2.ebuild,v 1.1 2010/03/30 17:32:44 billie Exp $
+
+EAPI=2
+
+PYTHON_DEPEND="!minimal? 2"
+PYTHON_USE_WITH="threads xml"
+PYTHON_USE_WITH_OPT="!minimal"
+
+inherit fdo-mime linux-info python autotools
+
+DESCRIPTION="HP Linux Imaging and Printing System. Includes printer, scanner, fax drivers and service tools."
+HOMEPAGE="http://hplipopensource.com/hplip-web/index.html"
+SRC_URI="mirror://sourceforge/hplip/${P}.tar.gz"
+
+LICENSE="GPL-2"
+SLOT="0"
+KEYWORDS="~amd64 ~ppc ~ppc64 ~x86"
+
+# zeroconf does not work properly with >=cups-1.4. thus support for it is also disabled in hplip.
+IUSE="doc fax gtk +hpcups hpijs libnotify minimal -new-hpcups parport policykit qt4 scanner snmp static-ppds -udev-acl"
+
+COMMON_DEPEND="
+	media-libs/jpeg
+	hpijs? ( >=net-print/foomatic-filters-3.0.20080507[cups] )
+	udev-acl? ( >=sys-fs/udev-145[extras] )
+	snmp? (
+		net-analyzer/net-snmp
+		dev-libs/openssl
+	)
+	!minimal? (
+		net-print/cups
+		virtual/libusb:0
+		scanner? ( >=media-gfx/sane-backends-1.0.19-r1 )
+		fax? ( sys-apps/dbus )
+	)"
+
+DEPEND="${COMMON_DEPEND}
+	dev-util/pkgconfig"
+
+RDEPEND="${COMMON_DEPEND}
+	>=app-text/ghostscript-gpl-8.70
+	!static-ppds? ( || ( >=net-print/cups-1.4.0 net-print/cupsddk ) )
+	!minimal? (
+		dev-python/pygobject
+		kernel_linux? ( >=sys-fs/udev-114 )
+		scanner? (
+			gtk? ( media-gfx/xsane )
+			!gtk? ( || ( media-gfx/sane-frontends dev-python/imaging ) )
+		)
+		fax? (
+			dev-python/reportlab
+			dev-python/dbus-python
+		)
+		qt4? (
+			dev-python/PyQt4[dbus,X]
+			libnotify? (
+				dev-python/notify-python
+			)
+			policykit? (
+				sys-auth/policykit
+			)
+		)
+	)"
+
+CONFIG_CHECK="~PARPORT ~PPDEV"
+ERROR_PARPORT="Please make sure parallel port support is enabled in your kernel (PARPORT and PPDEV)."
+
+pkg_setup() {
+	if ! use minimal; then
+		python_set_active_version 2
+		python_pkg_setup
+	fi
+
+	! use qt4 && ewarn "You need USE=qt4 for the hplip GUI."
+
+	use scanner && ! use gtk && ewarn "You need USE=gtk for the scanner GUI."
+
+	if ! use hpcups && ! use hpijs ; then
+		ewarn "Installing neither hpcups (USE=-hpcups) nor hpijs (USE=-hpijs) driver,"
+		ewarn "which is probably not what you want."
+		ewarn "You will almost certainly not be able to print."
+		ewarn "Recommended USE flags: USE=\"hpcups -hpijs\")."
+	fi
+
+	if use minimal ; then
+		ewarn "Installing driver portions only, make sure you know what you are doing."
+		ewarn "Depending on the USE flags set for hpcups and/or hpijs the appropiate"
+		ewarn "drivers are installed."
+	else
+		use parport && linux-info_pkg_setup
+	fi
+}
+
+src_prepare() {
+	python_convert_shebangs -q -r 2 .
+
+	# Do not install desktop files if there is no gui
+	# Upstream bug: https://bugs.launchpad.net/hplip/+bug/452113
+	epatch "${FILESDIR}"/${PN}-3.9.10-desktop.patch
+
+	# Browser detection through xdg-open
+	# Upstream bug: https://bugs.launchpad.net/hplip/+bug/482674
+	epatch "${FILESDIR}"/${PN}-3.9.10-browser.patch
+
+	# Use cups-config when checking for cupsddk
+	# Upstream bug: https://bugs.launchpad.net/hplip/+bug/483136
+	epatch "${FILESDIR}"/${PN}-3.9.12-cupsddk.patch
+
+	# Htmldocs are not installed under docdir/html so enable htmldir configure switch
+	# Upstream bug: https://bugs.launchpad.net/hplip/+bug/483217
+	epatch "${FILESDIR}"/${PN}-3.9.10-htmldir.patch
+
+	# Increase systray check timeout for slower machines
+	# Upstream bug: https://bugs.launchpad.net/hplip/+bug/335662
+	epatch "${FILESDIR}"/${PN}-3.9.12-systray.patch
+
+	# Make hp-plugin work if gui_mode is disabled
+	# Upstream bug: https://bugs.launchpad.net/hplip/+bug/399522
+	epatch "${FILESDIR}"/${P}-plugin.patch
+
+	# SYSFS deprecated but kept upstream for compatibility reasons
+	# Upstream bug: https://bugs.launchpad.net/hplip/+bug/346390
+	epatch "${FILESDIR}"/${P}-udev-attrs.patch
+
+	# Force recognition of Gentoo distro by hp-check
+	sed -i \
+		-e "s:file('/etc/issue', 'r').read():'Gentoo':" \
+		installer/core_install.py || die
+
+	# Use system foomatic-rip for hpijs driver instead of foomatic-rip-hplip
+	# The hpcups driver does not use foomatic-rip
+	local i
+	for i in ppd/hpijs/*.ppd.gz
+	do
+		rm -f ${i}.temp
+		gunzip -c ${i} | sed 's/foomatic-rip-hplip/foomatic-rip/g' | gzip > ${i}.temp || die
+		mv ${i}.temp ${i}
+	done
+
+	eautoreconf
+}
+
+src_configure() {
+	local gui_build myconf drv_build minimal_build
+
+	if use qt4 ; then
+		gui_build="--enable-gui-build --enable-qt4 --disable-qt3"
+		if use policykit ; then
+			myconf="--enable-policykit"
+		else
+			myconf="--disable-policykit"
+		fi
+	else
+		gui_build="--disable-gui-build --disable-qt3 --disable-qt4"
+	fi
+
+	if use fax || use qt4 ; then
+		myconf="${myconf} --enable-dbus-build"
+	else
+		myconf="${myconf} --disable-dbus-build"
+	fi
+
+	if use hpcups ; then
+		drv_build="$(use_enable hpcups hpcups-install)"
+		if use static-ppds ; then
+			drv_build="${drv_build} --enable-cups-ppd-install"
+			drv_build="${drv_build} --disable-cups-drv-install"
+		else
+			drv_build="${drv_build} --enable-cups-drv-install"
+			drv_build="${drv_build} --disable-cups-ppd-install"
+		fi
+	else
+		drv_build="--disable-hpcups-install --disable-cups-drv-install"
+		drv_build="${drv_build} --disable-cups-ppd-install"
+	fi
+
+	if use hpijs ; then
+		drv_build="${drv_build} $(use_enable hpijs hpijs-install)"
+		if use static-ppds ; then
+			drv_build="${drv_build} --enable-foomatic-ppd-install"
+			drv_build="${drv_build} --disable-foomatic-drv-install"
+		else
+			drv_build="${drv_build} --enable-foomatic-drv-install"
+			drv_build="${drv_build} --disable-foomatic-ppd-install"
+		fi
+	else
+		drv_build="${drv_build} --disable-hpijs-install"
+		drv_build="${drv_build} --disable-foomatic-drv-install"
+		drv_build="${drv_build} --disable-foomatic-ppd-install"
+	fi
+
+	if use minimal ; then
+		if use hpijs ; then
+			minimal_build="--enable-hpijs-only-build"
+		else
+			minimal_build="--disable-hpijs-only-build"
+		fi
+		if use hpcups ; then
+			minimal_build="${minimal_build} --enable-hpcups-only-build"
+		else
+			minimal_build="${minimal_build} --disable-hpcups-only-build"
+		fi
+	fi
+
+	econf \
+		--disable-dependency-tracking \
+		--disable-cups11-build \
+		--disable-lite-build \
+		--disable-foomatic-rip-hplip-install \
+		--disable-shadow-build \
+		--with-cupsbackenddir=$(cups-config --serverbin)/backend \
+		--with-cupsfilterdir=$(cups-config --serverbin)/filter \
+		--with-htmldir=/usr/share/doc/${P}/html \
+		${gui_build} \
+		${myconf} \
+		${drv_build} \
+		${minimal_build} \
+		$(use_enable new-hpcups new-hpcups) \
+		$(use_enable doc doc-build) \
+		$(use_enable fax fax-build) \
+		$(use_enable parport pp-build) \
+		$(use_enable scanner scan-build) \
+		$(use_enable snmp network-build) \
+		$(use_enable udev-acl udev-acl-rules)
+}
+
+src_install() {
+	emake DESTDIR="${D}" install || die
+
+	# Installed by sane-backends
+	# Gentoo Bug: #201023
+	rm -f "${D}"/etc/sane.d/dll.conf || die
+}
+
+pkg_postinst() {
+	use !minimal && python_mod_optimize /usr/share/${PN}
+	fdo-mime_desktop_database_update
+
+	elog "You should run hp-setup as root if you are installing hplip for the first time,"
+	elog "and may also need to run it if you are upgrading from an earlier version."
+	elog
+	elog "If your device is connected using USB, users will need to be in the lp group to"
+	elog "access it."
+	elog
+	elog "This release doesn't use an init script anymore, so you should probably do a"
+	elog "'rc-update del hplip' if you are updating from an old version."
+	elog
+	elog "Starting with versions of hplip >=3.9.8 mDNS is the default network search"
+	elog "mechanism. To make use of it you need to activate the zeroconf flag on cups."
+	elog "If you prefer the SLP method you have to choose this when configuring the"
+	elog "device."
+}
+
+pkg_postrm() {
+	use !minimal && python_mod_cleanup /usr/share/${PN}
+	fdo-mime_desktop_database_update
+}