6 files changed, 262 insertions, 0 deletions
diff --git a/net-misc/termpkg/files/termnetd.confd b/net-misc/termpkg/files/termnetd.confd
new file mode 100644
index 000000000000..4eb95a989d41
--- /dev/null
+++ b/net-misc/termpkg/files/termnetd.confd
@@ -0,0 +1,14 @@
+# Config file for /etc/init.d/termnetd
+
+# Set the configuration file to one other than the default of /etc/termnetd.conf
+#
+#CONFIG_FILE="/etc/termnetd.conf"
+
+# Sets the IP port to listen to for the control port (default = none).
+#
+#CONTROL_PORT=""
+
+# see the termnetd(1) manual page for additional options you can configure here
+#
+#EXTRA_OPTS=""
+
diff --git a/net-misc/termpkg/files/termnetd.initd b/net-misc/termpkg/files/termnetd.initd
new file mode 100644
index 000000000000..73d095c8717b
--- /dev/null
+++ b/net-misc/termpkg/files/termnetd.initd
@@ -0,0 +1,50 @@
+#!/sbin/runscript
+# Copyright 1999-2008 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/net-misc/termpkg/files/termnetd.initd,v 1.1 2008/09/23 19:34:00 sbriesen Exp $
+
+description="Terminal Server daemon (${RC_SVCNAME#*.})"
+description_reload="Reread configuration file and make the appropriate changes"
+extra_started_commands="reload"
+command="/usr/sbin/termnetd"
+name="termnetd"
+
+depend() {
+	use logger
+	need net
+}
+
+config_check() {
+	command_args="${EXTRA_OPTS}"
+	CONFIG_FILE_DEFAULT="/etc/termnetd.conf"
+
+	[ -z "${CONFIG_FILE}" ] && CONFIG_FILE="${CONFIG_FILE_DEFAULT}"
+	[ -n "${CONTROL_PORT}" ] && command_args="${command_args} -s ${CONTROL_PORT}"
+	[ "${CONFIG_FILE}" != "${CONFIG_FILE_DEFAULT}" ] && command_args="${command_args} -c ${CONFIG_FILE}"
+
+	if [ ! -f "${CONFIG_FILE}" ]; then
+		eerror "Please create ${CONFIG_FILE}"
+		eerror "Sample conf: ${CONFIG_FILE_DEFAULT}.dist"
+		return 1
+	fi
+	return 0
+}
+
+start() {
+	config_check || return ${?}
+	ebegin "Starting ${description}"
+	start-stop-daemon --start --quiet --exec "${command}" -- ${command_args}
+	eend ${?}
+}
+
+stop() {
+	ebegin "Stopping ${description}"
+	start-stop-daemon --stop --quiet --oknodo --exec "${command}" --name "${name}"
+	eend ${?}
+}
+
+reload() {
+	ebegin "Reloading ${description}"
+	start-stop-daemon --stop --signal HUP --oknodo --exec "${command}" --name "${name}"
+	eend ${?}
+}
diff --git a/net-misc/termpkg/files/termpkg-3.3-ttydforfax.diff b/net-misc/termpkg/files/termpkg-3.3-ttydforfax.diff
new file mode 100644
index 000000000000..0471fde13154
--- /dev/null
+++ b/net-misc/termpkg/files/termpkg-3.3-ttydforfax.diff
@@ -0,0 +1,28 @@
+--- termpkg-3.3/termnet/ttyd.c.orig	2005-09-29 08:59:05.000000000 -1000
++++ termpkg-3.3/termnet/ttyd.c	2005-09-29 08:51:33.000000000 -1000
+@@ -340,7 +340,10 @@
+                      char *cp;
+                      int x;
+                      for (cp = commbuf, x = 0; x < cnt; x++, cp++)
++if (isprint(*cp))
+                         syslog(LOG_DEBUG, "ttyd: Have net char 0x%x, |%c|", *cp, *cp);
++else
++syslog(LOG_DEBUG, "ttyd: Have net char 0x%x", *cp);
+                   }
+                   write(fd, commbuf, cnt);
+                }
+@@ -366,9 +369,13 @@
+                      char *cp;
+                      int x;
+                      for (cp = commbuf, x = 0; x < cnt; x++, cp++)
++if (isprint(*cp))
+                         syslog(LOG_DEBUG, "ttyd: Have key char 0x%x, |%c|", *cp, *cp);
++else
++syslog(LOG_DEBUG, "ttyd: Have key char 0x%x", *cp);
+                   }
+-                  inputTerminal(commbuf, cnt);
++//                  inputTerminal(commbuf, cnt);
++write(fileno(tnlout), commbuf, cnt);
+                }
+                else
+                   break;
diff --git a/net-misc/termpkg/files/termpkg-3.3.9.1-gcc43.diff b/net-misc/termpkg/files/termpkg-3.3.9.1-gcc43.diff
new file mode 100644
index 000000000000..8d17fc5dd8b9
--- /dev/null
+++ b/net-misc/termpkg/files/termpkg-3.3.9.1-gcc43.diff
@@ -0,0 +1,11 @@
+diff -Naur termpkg-3.3.orig/libtn/SocketIO.c termpkg-3.3/libtn/SocketIO.c
+--- termpkg-3.3.orig/libtn/SocketIO.c	2008-09-03 18:21:28.881220673 +0200
++++ termpkg-3.3/libtn/SocketIO.c	2008-09-03 18:23:29.106343243 +0200
+@@ -25,6 +25,7 @@
+ #endif
+ #include <sys/socket.h>
+ #include <netinet/in.h>
++#include <arpa/inet.h>
+ #include <fcntl.h>
+ #include <string.h>
+ #include <stdlib.h>
diff --git a/net-misc/termpkg/files/ttyd.confd b/net-misc/termpkg/files/ttyd.confd
new file mode 100644
index 000000000000..5b0e2b8c0002
--- /dev/null
+++ b/net-misc/termpkg/files/ttyd.confd
@@ -0,0 +1,63 @@
+# Configfile for /etc/init.d/ttyd
+
+# HINT: if you only need one virtual TTY, then you can use this config.
+# Otherwise you should use it as a template for specific configurations.
+# Just copy /etc/conf.d/ttyd to /etc/conf.d/ttyd.<foo> and symlink
+# /etc/init.d/ttyd to /etc/init.d/ttyd.<foo>
+
+
+# Master pseudo tty device to open and wait for a connection on.
+# For reference, in Linux the master pseudo tty devices are the
+# devices /dev/pty[a-ep-z][0-9a-f] and the slave devices are
+# /dev/tty[a-ep-z][0-9a-f].
+#
+PTY="/dev/ptyp0"
+
+# The host and port parameters specify the host and IP port to
+# connect to when the slave pseudo device is opened.
+#
+HOST="host.example.com"
+PORT=3000
+
+# The optional mode and user options specify the filesystem
+# permissions of the slave pseudo device. We set them right
+# after the ttyd daemon has started. After stopping, we reset
+# them to the permissions of the master pseudo device.
+#
+#MODE=660
+#USER="root:uucp"
+
+# Sets the initial baud-rate of the device (optional).
+#
+#BAUDRATE=115200
+
+# Optional port settings. Specified by a string of one of
+# more of the following concatenated together with no
+# intervening spaces:
+#
+# 8: 8 bits/character
+# 7: 7 bits/character
+# 6: 6 bits/character
+# 5: 5 bits/character
+# N: No parity
+# E: Even parity
+# O: Odd parity
+# C0: No hardware flow control
+# C1: Hardware flow control
+# S0: No software flow control
+# S1: Software flow control
+#
+#PORT_SETTINGS="8NC0"
+
+# You can create symlinks to the slave pseudo device, so you
+# have an easy to remember name for your virtual device. You
+# can add as many links as you want, if you blank-seperate the
+# names. All links *must* be relative and beneath to /dev.
+#
+#SYMLINK="ttyd/modem ttyNET0"
+
+# Some odd programs just don't work with symlinks, so you
+# can also create hardlinks (even in addition to symlinks).
+# Same rules apply as for symlinks.
+#
+#HARDLINK="ttyS5"
diff --git a/net-misc/termpkg/files/ttyd.initd b/net-misc/termpkg/files/ttyd.initd
new file mode 100644
index 000000000000..3302ea37bc9b
--- /dev/null
+++ b/net-misc/termpkg/files/ttyd.initd
@@ -0,0 +1,96 @@
+#!/sbin/runscript
+# Copyright 1999-2008 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/net-misc/termpkg/files/ttyd.initd,v 1.1 2008/09/23 19:34:00 sbriesen Exp $
+
+description="Remote Modem Utility (${RC_SVCNAME#*.})"
+command="/usr/sbin/ttyd"
+
+depend() {
+	use logger
+	need net
+}
+
+config_check() {
+	# sanitize PTY/TTY names
+	DEV_PTY="/dev/${PTY/\/dev\/}"
+	DEV_TTY="${DEV_PTY/\/pty//tty}"
+
+	# create command args
+	command_args="-d ${DEV_PTY}"
+	[ -n "${BAUDRATE}" ] && command_args="${command_args} -b ${BAUDRATE}"
+	[ -n "${PORT_SETTINGS}" ] && command_args="${command_args} -p ${PORT_SETTINGS}"
+	command_args="${command_args} ${HOST} ${PORT}"
+}
+
+device_check() {
+	if [ ! -e "${DEV_PTY}" ]; then
+		eerror "PTY doesn't exist: ${DEV_PTY}"
+		return 1
+	fi
+	if [ ! -e "${DEV_TTY}" ]; then
+		eerror "TTY doesn't exist: ${DEV_TTY}"
+		return 1
+	fi
+	return 0
+}
+
+linkrel() {  # <from> <to>
+	local LINK="${1%/*}/${2/\/dev\/}"
+	echo "${LINK/\/dev\/}" | sed "s:[^/]\+/:../:g"
+}
+
+setup_links() {
+	local LINK NODE
+	for LINK in ${SYMLINK}; do
+		NODE="/dev/${LINK/\/dev\/}"
+		mkdir -p -- "${NODE%/*}" && ln -snf -- $(linkrel "${NODE}" "${DEV_TTY}") "${NODE}"
+	done
+	for LINK in ${HARDLINK}; do
+		NODE="/dev/${LINK/\/dev\/}"
+		mkdir -p -- "${NODE%/*}" && ln -nf -- "${DEV_TTY}" "${NODE}"
+	done
+}
+
+unset_links() {
+	local LINK LIST=""
+	for LINK in ${SYMLINK} ${HARDLINK}; do
+		LIST="${LIST} /dev/${LINK/\/dev\/}"
+	done
+	[ -n "${LIST}" ] && rm -f -- ${LIST}
+}
+
+setup_perms() {
+	[ -n "${MODE}" ] && chmod "${MODE}" -- "${DEV_TTY}"
+	[ -n "${USER}" ] && chown "${USER}" -- "${DEV_TTY}"
+}
+
+unset_perms() {
+	[ -n "${USER}" ] && chown --reference "${DEV_PTY}" -- "${DEV_TTY}"
+	[ -n "${MODE}" ] && chmod --reference "${DEV_PTY}" -- "${DEV_TTY}"
+}
+
+start() {
+	config_check || return ${?}
+	device_check || return ${?}
+	ebegin "Starting ${description}"
+	start-stop-daemon --start --quiet --exec "${command}" -- ${command_args}
+	if eend ${?}; then
+		setup_perms
+		setup_links
+		return 0  # from here we never fail
+	fi
+}
+
+stop() {
+	config_check || return ${?}
+	# we can't use start-stop-daemon, because we don't have a pidfile
+	# *and* multiple processes can run at the same time. So we use
+	# pkill to identify *our* process via commandline args.
+	ebegin "Stopping ${description}"
+	/usr/bin/pkill -f "^${command} -d ${DEV_PTY} "
+	eend ${?}
+	unset_links
+	unset_perms
+	return 0  # never fail
+}