Remove security vulnerable version for bug #271738

(Portage version: 2.2_rc33/cvs/Linux i686)

2 files changed, 4 insertions, 401 deletions

diff --git a/sys-devel/libperl/ChangeLog b/sys-devel/libperl/ChangeLog
index 2b513cabda61..1e0cb1878f97 100644
--- a/sys-devel/libperl/ChangeLog
+++ b/sys-devel/libperl/ChangeLog
@@ -1,6 +1,9 @@
 # ChangeLog for sys-devel/libperl
 # Copyright 1999-2009 Gentoo Foundation; Distributed under the GPL v2
-# $Header: /var/cvsroot/gentoo-x86/sys-devel/libperl/ChangeLog,v 1.138 2009/05/02 13:19:14 arfrever Exp $
+# $Header: /var/cvsroot/gentoo-x86/sys-devel/libperl/ChangeLog,v 1.139 2009/05/29 14:22:00 tove Exp $
+
+  29 May 2009; Torsten Veller <tove@gentoo.org> -libperl-5.8.8-r1.ebuild:
+  Remove security vulnerable version for bug #271738
 
   02 May 2009; Arfrever Frehtes Taifersar Arahesis <arfrever@gentoo.org>
   libperl-5.8.8-r2.ebuild:
diff --git a/sys-devel/libperl/libperl-5.8.8-r1.ebuild b/sys-devel/libperl/libperl-5.8.8-r1.ebuild
deleted file mode 100644
index b9e12fafc71b..000000000000
--- a/sys-devel/libperl/libperl-5.8.8-r1.ebuild
+++ /dev/null
@@ -1,400 +0,0 @@
-# Copyright 1999-2007 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/sys-devel/libperl/libperl-5.8.8-r1.ebuild,v 1.25 2008/05/10 10:46:43 grobian Exp $
-
-# The basic theory based on comments from Daniel Robbins <drobbins@gentoo.org>.
-#
-# We split the perl ebuild into libperl and perl.  The layout is as follows:
-#
-# libperl:
-#
-#  This is a slotted (SLOT=[0-9]*) ebuild, meaning we should be able to have a
-#  few versions that are not binary compadible installed.
-#
-#  How we get libperl.so multi-versioned, is by adding to the link command:
-#
-#    -Wl,-soname -Wl,libperl.so.`echo $(LIBPERL) | cut -d. -f3`
-#
-#  This gives us:
-#
-#    $(LIBPERL): $& perl$(OBJ_EXT) $(obj) $(LIBPERLEXPORT)
-#        $(LD) -o $@ $(SHRPLDFLAGS) perl$(OBJ_EXT) $(obj) \
-#              -Wl,-soname -Wl,libperl.so.`echo $(LIBPERL) | cut -d. -f3`
-#
-#  We then configure perl with LIBPERL set to:
-#
-#    LIBPERL="libperl.so.${SLOT}.`echo ${PV} | cut -d. -f1,2`"
-#
-#  Or with the variables defined in this ebuild:
-#
-#    LIBPERL="libperl.so.${PERLSLOT}.${SHORT_PV}"
-#
-#  The result is that our 'soname' is 'libperl.so.${PERLSLOT}' (at the time of
-#  writing this for perl-5.8.0, 'libperl.so.1'), causing all apps that is linked
-#  to libperl to link to 'libperl.so.${PERLSLOT}'.
-#
-#  If a new perl version, perl-z.y.z comes out that have a libperl not binary
-#  compatible with the previous version, we just keep the previous libperl
-#  installed, and all apps linked to it will still be able to use:
-#
-#    libperl.so.${PERLSLOT}'
-#
-#  while the new ones will link to:
-#
-#    libperl.so.$((PERLSLOT+1))'
-#
-# perl:
-#
-#  Not much to this one.  It compiles with a static libperl.a, and are unslotted
-#  (meaning SLOT=0).  We thus always have the latest *stable* perl version
-#  installed, with corrisponding version of libperl.  The perl ebuild will of
-#  course DEPEND on libperl.
-#
-# Martin Schlemmer <azarah@gentoo.org> (28 Dec 2002).
-
-IUSE="berkdb debug gdbm ithreads"
-
-inherit eutils flag-o-matic toolchain-funcs multilib
-
-# The slot of this binary compat version of libperl.so
-PERLSLOT="1"
-
-SHORT_PV="${PV%.*}"
-MY_P="perl-${PV/_rc/-RC}"
-S="${WORKDIR}/${MY_P}"
-DESCRIPTION="Larry Wall's Practical Extraction and Reporting Language"
-SRC_URI="mirror://cpan/src/${MY_P}.tar.bz2"
-HOMEPAGE="http://www.perl.org"
-SLOT="${PERLSLOT}"
-LIBPERL="libperl$(get_libname ${PERLSLOT}.${SHORT_PV})"
-LICENSE="|| ( Artistic GPL-2 )"
-KEYWORDS="alpha amd64 arm hppa ia64 m68k mips ppc ppc64 s390 sh sparc ~sparc-fbsd x86 ~x86-fbsd"
-
-# rac 2004.08.06
-
-# i am not kidding here. you will forkbomb yourself out of existence
-# because make check -n wants to make miniperl, which runs itself at
-# the very end to make sure it's working right. this behaves very
-# badly when you -n it, because it won't exist and will therefore try
-# to build itself again ad infinitum.
-
-RESTRICT="test"
-
-DEPEND="berkdb? ( sys-libs/db )
-	gdbm? ( >=sys-libs/gdbm-1.8.0 )
-	elibc_FreeBSD? ( sys-freebsd/freebsd-mk-defs )"
-
-RDEPEND="
-	berkdb? ( sys-libs/db )
-	gdbm? ( >=sys-libs/gdbm-1.8.0 )"
-
-PDEPEND="~dev-lang/perl-${PV}"
-
-pkg_setup() {
-	# I think this should rather be displayed if you *have* 'ithreads'
-	# in USE if it could break things ...
-	if use ithreads
-	then
-		ewarn ""
-		ewarn "PLEASE NOTE: You are compiling perl-5.8 with"
-		ewarn "interpreter-level threading enabled."
-		ewarn "Threading is not supported by all applications "
-		ewarn "that compile against perl. You use threading at "
-		ewarn "your own discretion. "
-		ewarn ""
-		epause 10
-	fi
-}
-
-src_unpack() {
-
-	unpack ${A}
-
-	# Fix the build scripts to create libperl with a soname of ${SLOT}.
-	# We basically add:
-	#
-	#   -Wl,-soname -Wl,libperl.so.`echo $(LIBPERL) | cut -d. -f3`
-	#
-	# to the line that links libperl.so, and then set LIBPERL to:
-	#
-	#   LIBPERL=libperl.so.${SLOT}.`echo ${PV} | cut -d. -f1,2`
-	#
-	cd ${S};
-	epatch ${FILESDIR}/${PN}-create-libperl-soname.patch
-
-	# Configure makes an unwarranted assumption that /bin/ksh is a
-	# good shell. This patch makes it revert to using /bin/sh unless
-	# /bin/ksh really is executable. Should fix bug 42665.
-	# rac 2004.06.09
-	cd ${S}; epatch ${FILESDIR}/${PN}-noksh.patch
-
-	# we need the same @INC-inversion magic here we do in perl
-	cd ${S}; epatch ${FILESDIR}/${P}-reorder-INC.patch
-
-	# makedepend.SH contains a syntax error which is ignored by bash but causes
-	# dash to abort
-	epatch ${FILESDIR}/${P}-makedepend-syntax.patch
-
-	# On PA7200, uname -a contains a single quote and we need to
-	# filter it otherwise configure fails. See #125535.
-	epatch ${FILESDIR}/perl-hppa-pa7200-configure.patch
-
-	use amd64 && cd ${S} && epatch ${FILESDIR}/${P}-lib64.patch
-	[[ ${CHOST} == *-dragonfly* ]] && cd ${S} && epatch ${FILESDIR}/${P}-dragonfly-clean.patch
-	[[ ${CHOST} == *-freebsd* ]] && cd ${S} && epatch ${FILESDIR}/${P}-fbsdhints.patch
-	cd ${S}; epatch ${FILESDIR}/${P}-cplusplus.patch
-	has_version '>=sys-devel/gcc-4.2' && epatch ${FILESDIR}/${P}-gcc42-command-line.patch
-}
-
-myconf() {
-	myconf=( "${myconf[@]}" "$@" )
-}
-
-src_compile() {
-	declare -a myconf
-
-	# Perl has problems compiling with -Os in your flags
-	# some arches and -O do not mix :)
-	use arm && replace-flags -O? -O1
-	use ppc && replace-flags -O? -O1
-	use ia64 && replace-flags -O? -O1
-	# Perl has problems compiling with -Os in your flags with glibc
-	use elibc_uclibc || replace-flags "-Os" "-O2"
-	( gcc-specs-ssp && use ia64 ) && append-flags -fno-stack-protector
-	# This flag makes compiling crash in interesting ways
-	filter-flags "-malign-double"
-	# Fixes bug #97645
-	use ppc && filter-flags -mpowerpc-gpopt
-	# Fixes bug #143895 on gcc-4.1.1
-	filter-flags "-fsched2-use-superblocks"
-
-	export LC_ALL="C"
-
-	case ${CHOST} in
-		*-freebsd*) osname="freebsd" ;;
-		*-dragonfly*) osname="dragonfly" ;;
-		*-netbsd*) osname="netbsd" ;;
-		*-openbsd*) osname="openbsd" ;;
-		*-darwin*) osname="darwin" ;;
-
-		*) osname="linux" ;;
-	esac
-
-	if use ithreads
-	then
-		einfo "using ithreads"
-		mythreading="-multi"
-		myconf -Dusethreads
-		myarch=${CHOST}
-		myarch="${myarch%%-*}-${osname}-thread"
-	else
-		myarch=${CHOST}
-		myarch="${myarch%%-*}-${osname}"
-	fi
-
-	local inclist=$(for v in $PERL_OLDVERSEN; do echo -n "$v $v/$myarch$mythreading "; done)
-
-	# allow either gdbm to provide ndbm (in <gdbm/ndbm.h>) or db1
-
-	myndbm='U'
-	mygdbm='U'
-	mydb='U'
-
-	if use gdbm
-	then
-		mygdbm='D'
-		myndbm='D'
-	fi
-	if use berkdb
-	then
-		mydb='D'
-		has_version '=sys-libs/db-1*' && myndbm='D'
-	fi
-
-	myconf "-${myndbm}i_ndbm" "-${mygdbm}i_gdbm" "-${mydb}i_db"
-
-	if use mips
-	then
-		# this is needed because gcc 3.3-compiled kernels will hang
-		# the machine trying to run this test - check with `Kumba
-		# <rac@gentoo.org> 2003.06.26
-		myconf -Dd_u32align
-	fi
-
-	if use debug
-	then
-		CFLAGS="${CFLAGS} -g"
-		myconf -DDEBUGGING
-	fi
-
-	if use sparc
-	then
-		myconf -Ud_longdbl
-	fi
-
-	if use alpha && "$(tc-getCC)" == "ccc"
-	then
-		ewarn "Perl will not be built with berkdb support, use gcc if you needed it..."
-		myconf -Ui_db -Ui_ndbm
-	fi
-
-	rm -f config.sh Policy.sh
-
-	[[ -n "${ABI}" ]] && myconf "-Dusrinc=$(get_ml_incdir)"
-
-	[[ ${ELIBC} == "FreeBSD" ]] && myconf "-Dlibc=/usr/$(get_libdir)/libc.a"
-
-	if [[ $(get_libdir) != "lib" ]] ; then
-		myconf "-Dlibpth=/usr/local/$(get_libdir) /$(get_libdir) /usr/$(get_libdir)"
-	fi
-
-	sh Configure -des \
-		-Darchname="${myarch}" \
-		-Dcccdlflags="-fPIC" \
-		-Dccdlflags="-rdynamic" \
-		-Dcc="$(tc-getCC)" \
-		-Dprefix="/usr" \
-		-Dvendorprefix="/usr" \
-		-Dsiteprefix="/usr" \
-		-Dlocincpth=" " \
-		-Doptimize="${CFLAGS}" \
-		-Duselargefiles \
-		-Duseshrplib \
-		-Dman3ext="3pm" \
-		-Dlibperl="${LIBPERL}" \
-		-Dd_dosuid \
-		-Dd_semctl_semun \
-		-Dcf_by="Gentoo" \
-		-Ud_csh \
-		"${myconf[@]}" || die "Unable to configure"
-
-	emake -j1 -f Makefile depend || die "Couldn't make libperl$(get_libname) depends"
-	emake -j1 -f Makefile LIBPERL=${LIBPERL} ${LIBPERL} || die "Unable to make libperl$(get_libname)"
-	mv ${LIBPERL} ${WORKDIR}
-}
-
-src_install() {
-
-	export LC_ALL="C"
-
-	if [ "${PN}" = "libperl" ]
-	then
-		dolib.so ${WORKDIR}/${LIBPERL}
-		dosym ${LIBPERL} /usr/$(get_libdir)/libperl$(get_libname ${PERLSLOT})
-	else
-		# Need to do this, else apps do not link to dynamic version of
-		# the library ...
-		local coredir="/usr/$(get_libdir)/perl5/${PV}/${myarch}${mythreading}/CORE"
-		dodir ${coredir}
-		dosym ../../../../../$(get_libdir)/${LIBPERL} ${coredir}/${LIBPERL}
-		dosym ../../../../../$(get_libdir)/${LIBPERL} ${coredir}/libperl$(get_libname ${PERLSLOT})
-		dosym ../../../../../$(get_libdir)/${LIBPERL} ${coredir}/libperl$(get_libname)
-
-		# Fix for "stupid" modules and programs
-		dodir /usr/$(get_libdir)/perl5/site_perl/${PV}/${myarch}${mythreading}
-
-		make DESTDIR="${D}" \
-			INSTALLMAN1DIR="${D}/usr/share/man/man1" \
-			INSTALLMAN3DIR="${D}/usr/share/man/man3" \
-			install || die "Unable to make install"
-
-		cp -f utils/h2ph utils/h2ph_patched
-
-		LD_LIBRARY_PATH=. ./perl -Ilib utils/h2ph_patched \
-			-a -d ${D}/usr/$(get_libdir)/perl5/${PV}/${myarch}${mythreading} <<EOF
-asm/termios.h
-syscall.h
-syslimits.h
-syslog.h
-sys/ioctl.h
-sys/socket.h
-sys/time.h
-wait.h
-EOF
-
-		# This is to fix a missing c flag for backwards compat
-		for i in `find ${D}/usr/$(get_libdir)/perl5 -iname "Config.pm"`;do
-			sed -e "s:ccflags=':ccflags='-DPERL5 :" \
-			    -e "s:cppflags=':cppflags='-DPERL5 :" \
-				${i} > ${i}.new &&\
-				mv ${i}.new ${i} || die "Sed failed"
-		done
-
-		# A poor fix for the miniperl issues
-		dosed 's:./miniperl:/usr/bin/perl:' /usr/$(get_libdir)/perl5/${PV}/ExtUtils/xsubpp
-		fperms 0444 /usr/$(get_libdir)/perl5/${PV}/ExtUtils/xsubpp
-		dosed 's:./miniperl:/usr/bin/perl:' /usr/bin/xsubpp
-		fperms 0755 /usr/bin/xsubpp
-
-		./perl installman \
-			--man1dir="${D}/usr/share/man/man1" --man1ext='1' \
-			--man3dir="${D}/usr/share/man/man3" --man3ext='3'
-
-		# This removes ${D} from Config.pm and .packlist
-		for i in `find ${D} -iname "Config.pm"` `find ${D} -iname ".packlist"`;do
-			einfo "Removing ${D} from ${i}..."
-			sed -e "s:${D}::" ${i} > ${i}.new &&\
-				mv ${i}.new ${i} || die "Sed failed"
-		done
-	fi
-
-	dodoc Changes* Artistic Copying README Todo* AUTHORS
-
-	if [ "${PN}" = "perl" ]
-	then
-		# HTML Documentation
-		# We expect errors, warnings, and such with the following.
-
-		dodir /usr/share/doc/${PF}/html
-		./perl installhtml \
-			--podroot='.' \
-			--podpath='lib:ext:pod:vms' \
-			--recurse \
-			--htmldir="${D}/usr/share/doc/${PF}/html" \
-			--libpods='perlfunc:perlguts:perlvar:perlrun:perlop'
-	fi
-}
-
-pkg_postinst() {
-
-	# Make sure we do not have stale/invalid libperl.so 's ...
-	if [ -f "${ROOT}usr/$(get_libdir)/libperl$(get_libname)" -a ! -L "${ROOT}usr/$(get_libdir)/libperl$(get_libname)" ]
-	then
-		mv -f ${ROOT}usr/$(get_libdir)/libperl$(get_libname) ${ROOT}usr/$(get_libdir)/libperl$(get_libname).old
-	fi
-
-	# Next bit is to try and setup the /usr/lib/libperl.so symlink
-	# properly ...
-	local libnumber="`ls -1 ${ROOT}usr/$(get_libdir)/libperl$(get_libname ?.*) | grep -v '\.old' | wc -l`"
-	if [ "${libnumber}" -eq 1 ]
-	then
-		# Only this version of libperl is installed, so just link libperl.so
-		# to the *soname* version of it ...
-		ln -snf libperl$(get_libname ${PERLSLOT}) ${ROOT}usr/$(get_libdir)/libperl$(get_libname)
-	else
-		if [ -x "${ROOT}/usr/bin/perl" ]
-		then
-			# OK, we have more than one version .. first try to figure out
-			# if there are already a perl installed, if so, link libperl.so
-			# to that *soname* version of libperl.so ...
-			local perlversion="`${ROOT}/usr/bin/perl -V:version | cut -d\' -f2 | cut -d. -f1,2`"
-
-			cd ${ROOT}usr/$(get_libdir)
-			# Link libperl.so to the *soname* versioned lib ...
-			ln -snf `echo libperl$(get_libname ?.${perlversion}) | cut -d.  -f1,2,3` libperl$(get_libname)
-		else
-			local x latest
-
-			# Nope, we are not so lucky ... try to figure out what version
-			# is the latest, and keep fingers crossed ...
-			for x in `ls -1 ${ROOT}usr/$(get_libdir)/libperl$(get_libname ?.*)`
-			do
-				latest="${x}"
-			done
-
-			cd ${ROOT}usr/$(get_libdir)
-			# Link libperl.so to the *soname* versioned lib ...
-			ln -snf `echo ${latest##*/} | cut -d. -f1,2,3` libperl$(get_libname)
-		fi
-	fi
-}