Sanitize kernel version test

(Portage version: 2.1.10.39/cvs/Linux x86_64)

3 files changed, 7 insertions, 172 deletions

diff --git a/sci-libs/linux-gpib/ChangeLog b/sci-libs/linux-gpib/ChangeLog
index 7491da1dab6e..7a2baa929e06 100644
--- a/sci-libs/linux-gpib/ChangeLog
+++ b/sci-libs/linux-gpib/ChangeLog
@@ -1,6 +1,10 @@
 # ChangeLog for sci-libs/linux-gpib
 # Copyright 1999-2011 Gentoo Foundation; Distributed under the GPL v2
-# $Header: /var/cvsroot/gentoo-x86/sci-libs/linux-gpib/ChangeLog,v 1.3 2011/08/14 11:22:30 dilfridge Exp $
+# $Header: /var/cvsroot/gentoo-x86/sci-libs/linux-gpib/ChangeLog,v 1.4 2011/11/30 01:18:46 dilfridge Exp $
+
+  30 Nov 2011; Andreas K. Huettel <dilfridge@gentoo.org>
+  -linux-gpib-3.2.16.ebuild, linux-gpib-3.2.16-r1.ebuild:
+  Sanitize kernel version test
 
 *linux-gpib-3.2.16-r1 (14 Aug 2011)
 
diff --git a/sci-libs/linux-gpib/linux-gpib-3.2.16-r1.ebuild b/sci-libs/linux-gpib/linux-gpib-3.2.16-r1.ebuild
index cccdd3748da2..bf17674073ad 100644
--- a/sci-libs/linux-gpib/linux-gpib-3.2.16-r1.ebuild
+++ b/sci-libs/linux-gpib/linux-gpib-3.2.16-r1.ebuild
@@ -1,6 +1,6 @@
 # Copyright 1999-2011 Gentoo Foundation
 # Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/sci-libs/linux-gpib/linux-gpib-3.2.16-r1.ebuild,v 1.1 2011/08/14 11:22:30 dilfridge Exp $
+# $Header: /var/cvsroot/gentoo-x86/sci-libs/linux-gpib/linux-gpib-3.2.16-r1.ebuild,v 1.2 2011/11/30 01:18:46 dilfridge Exp $
 
 EAPI=4
 PERL_EXPORT_PHASE_FUNCTIONS=no
@@ -41,13 +41,7 @@ pkg_setup () {
 	perl-module_pkg_setup
 	linux-mod_pkg_setup
 
-	case ${KV_MINOR} in
-		4) die "This version of Linux-GPIB requires a version 2.6.x of the Linux kernel. 2.4.x kernels are supported by Linux-GPIB versions 3.1.x." ;;
-		6) ;;
-		*) die "Unsupported kernel version '${KV_FULL}'." ;;
-	esac
-
-	if [ ${KV_PATCH} -lt 8 ] ; then
+	if kernel_is -lt 2 6 8 ; then
 		die "Kernel versions older than 2.6.8 are not supported."
 	fi
 }
diff --git a/sci-libs/linux-gpib/linux-gpib-3.2.16.ebuild b/sci-libs/linux-gpib/linux-gpib-3.2.16.ebuild
deleted file mode 100644
index ae89871a8ba8..000000000000
--- a/sci-libs/linux-gpib/linux-gpib-3.2.16.ebuild
+++ /dev/null
@@ -1,163 +0,0 @@
-# Copyright 1999-2011 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/sci-libs/linux-gpib/linux-gpib-3.2.16.ebuild,v 1.1 2011/05/14 17:05:08 dilfridge Exp $
-
-EAPI=4
-
-inherit base linux-mod autotools
-
-DESCRIPTION="Kernel module and driver library for GPIB (IEEE 488.2) hardware"
-HOMEPAGE="http://linux-gpib.sourceforge.net/"
-SRC_URI="mirror://sourceforge/linux-gpib/${P}.tar.gz
-	firmware? ( http://linux-gpib.sourceforge.net/firmware/gpib_firmware-2006-11-12.tar.gz )"
-
-LICENSE="GPL-2"
-SLOT="0"
-KEYWORDS="~amd64 ~x86"
-IUSE="pcmcia static debug guile perl php python tcl doc firmware"
-
-RDEPEND="
-	tcl? ( dev-lang/tcl )
-	guile? ( dev-scheme/guile )
-	perl? ( dev-lang/perl )
-	php? ( dev-lang/php )
-	python? ( dev-lang/python )
-	firmware? ( sys-apps/fxload )
-"
-
-DEPEND="${RDEPEND}
-	sys-kernel/module-rebuild
-	doc? ( app-text/docbook-sgml-utils )
-"
-
-PATCHES=( "${FILESDIR}/${PN}-3.2.15-build.patch" )
-
-pkg_setup () {
-	linux-mod_pkg_setup
-
-	case ${KV_MINOR} in
-		4) die "This version of Linux-GPIB requires a version 2.6.x of the Linux kernel. 2.4.x kernels are supported by Linux-GPIB versions 3.1.x." ;;
-		6) ;;
-		*) die "Unsupported kernel version '${KV_FULL}'." ;;
-	esac
-
-	if [ ${KV_PATCH} -lt 8 ] ; then
-		die "Kernel versions older than 2.6.8 are not supported."
-	fi
-}
-
-src_prepare () {
-	base_src_prepare
-	eautoreconf
-}
-
-src_configure() {
-	set_arch_to_kernel
-	econf \
-		$(use_enable pcmcia) \
-		$(use_enable static) \
-		$(use_enable debug driver-debug) \
-		$(use_enable guile guile-binding) \
-		$(use_enable perl perl-binding) \
-		$(use_enable php php-binding) \
-		$(use_enable python python-binding) \
-		$(use_enable tcl tcl-binding) \
-		$(use_enable doc documentation) \
-		--with-linux-srcdir=${KV_DIR} \
-		|| die
-}
-
-src_install () {
-	set_arch_to_kernel
-
-	FIRM_DIR=/usr/share/usb
-
-	# Here I changed the sbindir in order to install the gpib_config to /sbin,
-	# not /usr/sbin. This is done to enable running gpib_config from
-	# the modprobe.conf file: if /usr is not in the root file system,
-	# but a mounted partition then gpib_congig cannot be found in the moment when
-	# modprobe is run.
-	make \
-		DESTDIR=${D} \
-		INSTALL_MOD_PATH=${D} \
-		HOTPLUG_USB_CONF_DIR=${D}/etc/hotplug/usb \
-		USB_FIRMWARE_DIR=${D}${FIRM_DIR} \
-		docdir=/usr/share/doc/${PF}/html \
-		install || die "install problem"
-
-	echo "KERNEL==\"gpib[0-9]*\",	MODE=\"0660\", GROUP=\"gpib\"" >> 99-gpib.rules
-	insinto /etc/udev/rules.d/
-	doins 99-gpib.rules
-
-	dodoc doc/linux-gpib.pdf ChangeLog AUTHORS README* NEWS
-
-	insinto /etc
-	newins util/templates/gpib.conf gpib.conf
-	newins util/templates/gpib.conf gpib.conf.example
-
-	if use pcmcia ; then
-		dodir /etc/pcmcia
-		insinto /etc/pcmcia
-		doins "${S}"/etc/pcmcia/*
-	fi
-
-	if use firmware ; then
-
-		insinto "${FIRM_DIR}/agilent_8237a"
-		doins "${WORKDIR}"/gpib_firmware-2006-11-12/agilent_8237a/*
-
-		insinto "${FIRM_DIR}/ni_gpib_usb_b"
-		doins "${WORKDIR}"/gpib_firmware-2006-11-12/ni_gpib_usb_b/*
-
-		insinto "/usr/share/linux-gpib/hp_82341"
-		doins "${WORKDIR}"/gpib_firmware-2006-11-12/hp_82341/*
-
-	fi
-}
-
-pkg_preinst () {
-	linux-mod_pkg_preinst
-	enewgroup gpib
-}
-
-pkg_postinst () {
-	linux-mod_pkg_postinst
-
-	einfo "You need to run the 'gpib_config' utility to setup the driver before"
-	einfo "you can use it. In order to do it automatically you can add to your"
-	einfo "start script something like this (supposing the appropriate driver"
-	einfo "is loaded on the startup):"
-	einfo "		gpib_config --minor 0"
-	einfo ""
-	einfo "To give a user access to the computer's gpib board you will have to add"
-	einfo "them to the group 'gpib' or, you could change the permissions on the device"
-	einfo "files /dev/gpib[0-15] to something you like better, using 'chmod'."
-	einfo ""
-	einfo "Edit /etc/gpib.conf to match your interface board, and any devices you wish"
-	einfo "to open via ibfind().  See the documentation in /usr/share/linux-gpib/html for"
-	einfo "more information."
-	einfo ""
-
-	if use pcmcia ; then
-		einfo "For PCMCIA cards:"
-		einfo "All files needed for a PCMCIA board were copied to /etc/pcmcia."
-		einfo "You may wish to edit the options passed to the gpib_config call in the"
-		einfo "/etc/pcmcia/linux-gpib-pcmcia script."
-		einfo "You may need to send a SIGHUP signal to the cardmgr daemon to force it"
-		einfo "to reload the files in /etc/pcmcia (alternatively you could use your"
-		einfo "pcmcia init.d script to restart the cardmgr, or you could just reboot)."
-		einfo "The driver module will be loaded as needed by the cardmgr."
-		einfo ""
-	fi
-
-	if use firmware ; then
-		einfo "For Agilent (HP) 82341C and 82341D cards:"
-		einfo "The firmware for these boards is uploaded by passing the appropriate"
-		einfo "firmware file from /usr/share/linux-gpib/hp_82341 directory to"
-		einfo "gpib_config using the -I or --init-data command line option. Example:"
-		einfo "gpib_config --minor 0 --init-data \\"
-		einfo "/usr/share/linux-gpib/hp_82341/hp_82341c_fw.bin"
-		einfo ""
-	fi
-
-}