summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorHeinrich Wendel <lanius@gentoo.org>2005-01-03 16:35:52 +0000
committerHeinrich Wendel <lanius@gentoo.org>2005-01-03 16:35:52 +0000
commit917b1d5a888a0bdf10541dd8d7de0f187f0d3893 (patch)
treec545d77e76a29f3beb03689be55ec87615b51b99 /net-print
parentNew ebuild thanks to Martin von Gagern <Martin.vGagern@gmx.net>, n0ne <baal.k... (diff)
downloadgentoo-2-917b1d5a888a0bdf10541dd8d7de0f187f0d3893.tar.gz
gentoo-2-917b1d5a888a0bdf10541dd8d7de0f187f0d3893.tar.bz2
gentoo-2-917b1d5a888a0bdf10541dd8d7de0f187f0d3893.zip
cleanups; replace hotplug with coldplug"
Diffstat (limited to 'net-print')
-rw-r--r--net-print/cups/ChangeLog14
-rw-r--r--net-print/cups/Manifest31
-rw-r--r--net-print/cups/cups-1.1.20-r5.ebuild124
-rw-r--r--net-print/cups/cups-1.1.22.ebuild129
-rw-r--r--net-print/cups/cups-1.1.23_rc1.ebuild14
-rw-r--r--net-print/cups/files/cups-1.1.20-str633.patch11
-rw-r--r--net-print/cups/files/cups-1.1.20-xpdf-CESA-2004-007.patch.bz2bin968 -> 0 bytes
-rw-r--r--net-print/cups/files/cups-1.1.20-xpdf2-underflow.patch81
-rw-r--r--net-print/cups/files/cups-1.1.20-zero-len-udp-dos.patch22
-rw-r--r--net-print/cups/files/cups-1.1.21-xpdf-CESA-2004-007.patch.bz2bin966 -> 0 bytes
-rw-r--r--net-print/cups/files/cupsd.conf-1.1.18788
-rw-r--r--net-print/cups/files/digest-cups-1.1.20-r51
-rw-r--r--net-print/cups/files/digest-cups-1.1.221
-rw-r--r--net-print/cups/files/str920.patch181
14 files changed, 21 insertions, 1376 deletions
diff --git a/net-print/cups/ChangeLog b/net-print/cups/ChangeLog
index b78e980ac380..21b1f7edee10 100644
--- a/net-print/cups/ChangeLog
+++ b/net-print/cups/ChangeLog
@@ -1,6 +1,16 @@
# ChangeLog for net-print/cups
-# Copyright 2002-2004 Gentoo Foundation; Distributed under the GPL v2
-# $Header: /var/cvsroot/gentoo-x86/net-print/cups/ChangeLog,v 1.108 2004/12/31 20:30:20 hardave Exp $
+# Copyright 2002-2005 Gentoo Foundation; Distributed under the GPL v2
+# $Header: /var/cvsroot/gentoo-x86/net-print/cups/ChangeLog,v 1.109 2005/01/03 16:35:52 lanius Exp $
+
+ 03 Jan 2005; Heinrich Wendel <lanius@gentoo.org>
+ -files/cups-1.1.20-str633.patch,
+ -files/cups-1.1.20-xpdf-CESA-2004-007.patch.bz2,
+ -files/cups-1.1.20-xpdf2-underflow.patch,
+ -files/cups-1.1.20-zero-len-udp-dos.patch,
+ -files/cups-1.1.21-xpdf-CESA-2004-007.patch.bz2, -files/cupsd.conf-1.1.18,
+ -files/str920.patch, -cups-1.1.20-r5.ebuild, -cups-1.1.22.ebuild,
+ cups-1.1.23_rc1.ebuild:
+ cleanups; replace hotplug with coldplug
31 Dec 2004; Hardave Riar <hardave@gentoo.org> cups-1.1.23_rc1.ebuild:
Stable on mips, bug #74479
diff --git a/net-print/cups/Manifest b/net-print/cups/Manifest
index a6fb0a14f07e..b1444deb6094 100644
--- a/net-print/cups/Manifest
+++ b/net-print/cups/Manifest
@@ -1,31 +1,10 @@
------BEGIN PGP SIGNED MESSAGE-----
-Hash: SHA1
-
+MD5 d0548fed2ec7ee2dd250d424788abfdb cups-1.1.23_rc1.ebuild 3908
MD5 9feedb7e9cb839e69599bb234da24996 ChangeLog 14128
MD5 26b4b081d538c195dc39bcb2ec8e6f3a metadata.xml 161
-MD5 9e3e1fb857caeb045a32e996e9238da3 cups-1.1.23_rc1.ebuild 4107
-MD5 7d527fbd218552edf324a082dfe75bdd cups-1.1.22.ebuild 3895
-MD5 44312919fe8a6c361fd4d36adc37ac61 cups-1.1.20-r5.ebuild 3648
-MD5 7242b8a2000fe4c5a2b398e6602f7f1c files/cups.pam 234
-MD5 b041836e6ee51876ca7ec86869643018 files/cups.xinetd 368
-MD5 e8608b3605ae84d0f10dbc635d65292a files/cupsd.conf-1.1.18 20538
+MD5 85bc20d893f097ef0f13947179c3838c files/cups-1.1.22-xpdf2-underflow.patch 2301
+MD5 a072271745e21050d873cc0cd2d7b6aa files/digest-cups-1.1.23_rc1 75
MD5 d7e6454c7e8062203b324c5f6a1a2c65 files/cupsd.rc6 515
+MD5 7242b8a2000fe4c5a2b398e6602f7f1c files/cups.pam 234
MD5 7bce495a238ee9dbebb61496f3b3ae51 files/disable-strip.patch 422
-MD5 152f70bcd644a5da56756b8b82193d10 files/cups-1.1.20-str633.patch 268
-MD5 a072271745e21050d873cc0cd2d7b6aa files/digest-cups-1.1.23_rc1 75
-MD5 1219d8139b95119054d7744f6dea85a6 files/str920.patch 5795
-MD5 fbd28fb7593c247a7151704df5a253ea files/cups-1.1.20-zero-len-udp-dos.patch 965
-MD5 bef8c5e9724acac435ca092c232685f8 files/digest-cups-1.1.22 72
MD5 2fce5bedd61300fad1566a41f991a782 files/xpdf-goo-sizet.patch 1424
-MD5 baaa1e0bc63f959779998f5e57de6f9d files/digest-cups-1.1.20-r5 72
-MD5 04f90143ff0dc0329b242a1f955af20e files/cups-1.1.20-xpdf-CESA-2004-007.patch.bz2 968
-MD5 ff2fde0af36236ae1813438275525fa2 files/cups-1.1.21-xpdf-CESA-2004-007.patch.bz2 966
-MD5 ef32d65c7ec41690574a92d2436366df files/cups-1.1.20-xpdf2-underflow.patch 2295
-MD5 85bc20d893f097ef0f13947179c3838c files/cups-1.1.22-xpdf2-underflow.patch 2301
------BEGIN PGP SIGNATURE-----
-Version: GnuPG v1.9.10 (GNU/Linux)
-
-iD8DBQFB184NroRuSHgZdywRAmkjAJ4pcQkX3WMebMED4F3urcwQKQJB2QCfS83e
-2EfbAqxBn936BxbDoApVDIM=
-=vqBy
------END PGP SIGNATURE-----
+MD5 b041836e6ee51876ca7ec86869643018 files/cups.xinetd 368
diff --git a/net-print/cups/cups-1.1.20-r5.ebuild b/net-print/cups/cups-1.1.20-r5.ebuild
deleted file mode 100644
index c3933725a709..000000000000
--- a/net-print/cups/cups-1.1.20-r5.ebuild
+++ /dev/null
@@ -1,124 +0,0 @@
-# Copyright 1999-2004 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/net-print/cups/cups-1.1.20-r5.ebuild,v 1.8 2004/11/07 23:56:25 kumba Exp $
-
-inherit eutils flag-o-matic
-
-DESCRIPTION="The Common Unix Printing System"
-HOMEPAGE="http://www.cups.org/"
-SRC_URI="ftp://ftp.easysw.com/pub/cups/${PV}/${P}-source.tar.bz2"
-
-LICENSE="GPL-2"
-SLOT="0"
-KEYWORDS="x86 ppc sparc mips alpha arm hppa amd64 ia64 s390 ppc64"
-IUSE="ssl slp pam"
-
-DEP="virtual/libc
- pam? ( >=sys-libs/pam-0.75 )
- ssl? ( >=dev-libs/openssl-0.9.6b )
- slp? ( >=net-libs/openslp-1.0.4 )
- >=media-libs/libpng-1.2.1
- >=media-libs/tiff-3.5.5
- >=media-libs/jpeg-6b"
-DEPEND="${DEP}
- >=sys-devel/autoconf-2.58"
-RDEPEND="${DEP}
- !virtual/lpr"
-PROVIDE="virtual/lpr"
-
-src_unpack() {
- unpack ${A}
- cd ${S}
- epatch ${FILESDIR}/disable-strip.patch
- epatch ${FILESDIR}/${P}-str633.patch
- epatch ${FILESDIR}/${P}-zero-len-udp-dos.patch
- epatch ${FILESDIR}/str920.patch
- ( cd pdftops; epatch ${FILESDIR}/${P}-xpdf-CESA-2004-007.patch.bz2 )
- ( cd pdftops; epatch ${FILESDIR}/xpdf-goo-sizet.patch )
- ( cd pdftops; epatch ${FILESDIR}/${P}-xpdf2-underflow.patch )
- WANT_AUTOCONF=2.5 autoconf || die
-}
-
-src_compile() {
- filter-flags -fomit-frame-pointer
-
- local myconf
- use amd64 && replace-flags -Os -O2
- use pam || myconf="${myconf} --disable-pam"
- use ssl || myconf="${myconf} --disable-ssl"
- use slp || myconf="${myconf} --disable-slp"
-
- ./configure \
- --with-cups-user=lp \
- --with-cups-group=lp \
- --host=${CHOST} ${myconf} || die "bad ./configure"
-
- make || die "compile problem"
-}
-
-src_install() {
- dodir /var/spool /var/log/cups /etc/cups
-
- make \
- LOCALEDIR=${D}/usr/share/locale \
- DOCDIR=${D}/usr/share/cups/docs \
- REQUESTS=${D}/var/spool/cups \
- SERVERBIN=${D}/usr/$(get_libdir)/cups \
- DATADIR=${D}/usr/share/cups \
- INCLUDEDIR=${D}/usr/include \
- AMANDIR=${D}/usr/share/man \
- PMANDIR=${D}/usr/share/man \
- MANDIR=${D}/usr/share/man \
- SERVERROOT=${D}/etc/cups \
- LOGDIR=${D}/var/log/cups \
- SBINDIR=${D}/usr/sbin \
- PAMDIR=${D}/etc/pam.d \
- EXEC_PREFIX=${D}/usr \
- LIBDIR=${D}/usr/$(get_libdir) \
- BINDIR=${D}/usr/bin \
- bindir=${D}/usr/bin \
- INITDIR=${D}/etc \
- PREFIX=${D} \
- install || die "install problem"
-
- dodoc {CHANGES,CREDITS,ENCRYPTION,LICENSE,README}.txt
- dosym /usr/share/cups/docs /usr/share/doc/${PF}/html
-
- #seems nobody installs it like this anymore.. security risk?
- #fowners lp.root /usr/bin/lppasswd
- #fperms 4755 /usr/bin/lppasswd
-
- # cleanups
- rm -rf ${D}/etc/init.d
- rm -rf ${D}/etc/pam.d
- rm -rf ${D}/etc/rc*
- rm -rf ${D}/usr/share/man/cat*
- rm -rf ${D}/etc/cups/{certs,interfaces,ppd}
- rm -rf ${D}/var
-
- sed -i -e "s:^#\(DocumentRoot\).*:\1 /usr/share/cups/docs:" \
- -e "s:^#\(SystemGroup\).*:\1 lp:" \
- -e "s:^#\(User\).*:\1 lp:" \
- -e "s:^#\(Group\).*:\1 lp:" \
- ${D}/etc/cups/cupsd.conf
-
- insinto /etc/pam.d ; newins ${FILESDIR}/cups.pam cups
- exeinto /etc/init.d ; newexe ${FILESDIR}/cupsd.rc6 cupsd
- insinto /etc/xinetd.d ; newins ${FILESDIR}/cups.xinetd cups-lpd
-
- #insinto /etc/cups; newins ${FILESDIR}/cupsd.conf-1.1.18 cupsd.conf
-}
-
-pkg_postinst() {
- install -d -m0755 ${ROOT}/var/log/cups
- install -d -m0755 ${ROOT}/var/spool
- install -m0700 -o lp -d ${ROOT}/var/spool/cups
- install -m1700 -o lp -d ${ROOT}/var/spool/cups/tmp
- install -m0711 -o lp -d ${ROOT}/etc/cups/certs
- install -d -m0755 ${ROOT}/etc/cups/{interfaces,ppd}
-
- einfo "If you're using a USB printer, \"emerge hotplug; rc-update add"
- einfo "hotplug default\" is something you should probably do. This"
- einfo "will allow any USB kernel modules (if present) to be loaded"
- einfo "automatically at boot."
-}
diff --git a/net-print/cups/cups-1.1.22.ebuild b/net-print/cups/cups-1.1.22.ebuild
deleted file mode 100644
index 4e411800f8d5..000000000000
--- a/net-print/cups/cups-1.1.22.ebuild
+++ /dev/null
@@ -1,129 +0,0 @@
-# Copyright 1999-2004 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/net-print/cups/cups-1.1.22.ebuild,v 1.2 2004/11/12 12:01:12 lanius Exp $
-
-inherit eutils flag-o-matic
-
-MY_P=${P/_/}
-
-DESCRIPTION="The Common Unix Printing System"
-HOMEPAGE="http://www.cups.org/"
-SRC_URI="ftp://ftp2.easysw.com/pub/cups/${PV}/${MY_P}-source.tar.bz2 ftp://ftp.easysw.com/pub/cups/${PV}/${MY_P}-source.tar.bz2 ftp://ftp.funet.fi/pub/mirrors/ftp.easysw.com/pub/cups/${PV}/${MY_P}-source.tar.bz2"
-
-LICENSE="GPL-2"
-SLOT="0"
-KEYWORDS="~x86 ~ppc ~sparc ~mips ~alpha ~arm ~hppa ~amd64 ~ia64 ~s390 ~ppc64"
-IUSE="ssl slp pam samba"
-
-DEP="virtual/libc
- pam? ( >=sys-libs/pam-0.75 )
- ssl? ( >=dev-libs/openssl-0.9.6b )
- slp? ( >=net-libs/openslp-1.0.4 )
- >=media-libs/libpng-1.2.1
- >=media-libs/tiff-3.5.5
- >=media-libs/jpeg-6b"
-DEPEND="${DEP}
- >=sys-devel/autoconf-2.58"
-RDEPEND="${DEP}
- !virtual/lpr"
-PDEPEND="samba? ( net-fs/samba )"
-PROVIDE="virtual/lpr"
-
-S=${WORKDIR}/${MY_P}
-
-src_unpack() {
- unpack ${A}
- cd ${S}
- epatch ${FILESDIR}/disable-strip.patch
- ( cd pdftops; epatch ${FILESDIR}/xpdf-goo-sizet.patch )
- ( cd pdftops; epatch ${FILESDIR}/${P}-xpdf2-underflow.patch )
- WANT_AUTOCONF=2.5 autoconf || die
-}
-
-src_compile() {
- filter-flags -fomit-frame-pointer
-
- local myconf
- use amd64 && replace-flags -Os -O2
- use pam || myconf="${myconf} --disable-pam"
- use ssl || myconf="${myconf} --disable-ssl"
- use slp || myconf="${myconf} --disable-slp"
-
- ./configure \
- --with-cups-user=lp \
- --with-cups-group=lp \
- --host=${CHOST} ${myconf} || die "bad ./configure"
-
- make || die "compile problem"
-}
-
-src_install() {
- dodir /var/spool /var/log/cups /etc/cups
-
- make \
- LOCALEDIR=${D}/usr/share/locale \
- DOCDIR=${D}/usr/share/cups/docs \
- REQUESTS=${D}/var/spool/cups \
- SERVERBIN=${D}/usr/$(get_libdir)/cups \
- DATADIR=${D}/usr/share/cups \
- INCLUDEDIR=${D}/usr/include \
- AMANDIR=${D}/usr/share/man \
- PMANDIR=${D}/usr/share/man \
- MANDIR=${D}/usr/share/man \
- SERVERROOT=${D}/etc/cups \
- LOGDIR=${D}/var/log/cups \
- SBINDIR=${D}/usr/sbin \
- PAMDIR=${D}/etc/pam.d \
- EXEC_PREFIX=${D}/usr \
- LIBDIR=${D}/usr/$(get_libdir) \
- BINDIR=${D}/usr/bin \
- bindir=${D}/usr/bin \
- INITDIR=${D}/etc \
- PREFIX=${D} \
- install || die "install problem"
-
- dodoc {CHANGES,CREDITS,ENCRYPTION,LICENSE,README}.txt
- dosym /usr/share/cups/docs /usr/share/doc/${PF}/html
-
- #seems nobody installs it like this anymore.. security risk?
- #fowners lp.root /usr/bin/lppasswd
- #fperms 4755 /usr/bin/lppasswd
-
- # cleanups
- rm -rf ${D}/etc/init.d
- rm -rf ${D}/etc/pam.d
- rm -rf ${D}/etc/rc*
- rm -rf ${D}/usr/share/man/cat*
- rm -rf ${D}/etc/cups/{certs,interfaces,ppd}
- rm -rf ${D}/var
-
- sed -i -e "s:^#\(DocumentRoot\).*:\1 /usr/share/cups/docs:" \
- -e "s:^#\(SystemGroup\).*:\1 lp:" \
- -e "s:^#\(User\).*:\1 lp:" \
- -e "s:^#\(Group\).*:\1 lp:" \
- ${D}/etc/cups/cupsd.conf
-
- insinto /etc/pam.d ; newins ${FILESDIR}/cups.pam cups
- exeinto /etc/init.d ; newexe ${FILESDIR}/cupsd.rc6 cupsd
- insinto /etc/xinetd.d ; newins ${FILESDIR}/cups.xinetd cups-lpd
-
- #insinto /etc/cups; newins ${FILESDIR}/cupsd.conf-1.1.18 cupsd.conf
-
- # allow raw printing
- sed -i -e "s:#application/octet-stream:application/octet-stream" ${D}/etc/cups/mime.types
- sed -i -e "s:#application/octet-stream:application/octet-stream" ${D}/etc/cups/mime.conv
-}
-
-pkg_postinst() {
- install -d -m0755 ${ROOT}/var/log/cups
- install -d -m0755 ${ROOT}/var/spool
- install -m0700 -o lp -d ${ROOT}/var/spool/cups
- install -m1700 -o lp -d ${ROOT}/var/spool/cups/tmp
- install -m0711 -o lp -d ${ROOT}/etc/cups/certs
- install -d -m0755 ${ROOT}/etc/cups/{interfaces,ppd}
-
- einfo "If you're using a USB printer, \"emerge hotplug; rc-update add"
- einfo "hotplug default\" is something you should probably do. This"
- einfo "will allow any USB kernel modules (if present) to be loaded"
- einfo "automatically at boot."
-}
diff --git a/net-print/cups/cups-1.1.23_rc1.ebuild b/net-print/cups/cups-1.1.23_rc1.ebuild
index 670a8c712136..f01e771bec02 100644
--- a/net-print/cups/cups-1.1.23_rc1.ebuild
+++ b/net-print/cups/cups-1.1.23_rc1.ebuild
@@ -1,6 +1,6 @@
-# Copyright 1999-2004 Gentoo Foundation
+# Copyright 1999-2005 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/net-print/cups/cups-1.1.23_rc1.ebuild,v 1.7 2005/01/02 10:33:35 vapier Exp $
+# $Header: /var/cvsroot/gentoo-x86/net-print/cups/cups-1.1.23_rc1.ebuild,v 1.8 2005/01/03 16:35:52 lanius Exp $
inherit eutils flag-o-matic
@@ -87,10 +87,6 @@ src_install() {
dodoc {CHANGES,CREDITS,ENCRYPTION,LICENSE,README}.txt
dosym /usr/share/cups/docs /usr/share/doc/${PF}/html
- #seems nobody installs it like this anymore.. security risk?
- #fowners lp.root /usr/bin/lppasswd
- #fperms 4755 /usr/bin/lppasswd
-
# cleanups
rm -rf ${D}/etc/init.d
rm -rf ${D}/etc/pam.d
@@ -112,8 +108,6 @@ src_install() {
exeinto /etc/init.d ; newexe ${FILESDIR}/cupsd.rc6 cupsd
insinto /etc/xinetd.d ; newins ${FILESDIR}/cups.xinetd cups-lpd
- #insinto /etc/cups; newins ${FILESDIR}/cupsd.conf-1.1.18 cupsd.conf
-
# allow raw printing
sed -i -e "s:#application/octet-stream:application/octet-stream" ${D}/etc/cups/mime.types
sed -i -e "s:#application/octet-stream:application/octet-stream" ${D}/etc/cups/mime.conv
@@ -131,8 +125,8 @@ pkg_postinst() {
install -m0711 -o lp -d ${ROOT}/etc/cups/certs
install -d -m0755 ${ROOT}/etc/cups/{interfaces,ppd}
- einfo "If you're using a USB printer, \"emerge hotplug; rc-update add"
- einfo "hotplug default\" is something you should probably do. This"
+ einfo "If you're using a USB printer, \"emerge coldplug; rc-update add"
+ einfo "coldplug default\" is something you should probably do. This"
einfo "will allow any USB kernel modules (if present) to be loaded"
einfo "automatically at boot."
}
diff --git a/net-print/cups/files/cups-1.1.20-str633.patch b/net-print/cups/files/cups-1.1.20-str633.patch
deleted file mode 100644
index 59cba9a6b662..000000000000
--- a/net-print/cups/files/cups-1.1.20-str633.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- pdftops/Gfx.cxx 2003-11-21 14:18:07.000000000 -0500
-+++ pdftops/Gfx.cxx.jev 2004-04-01 16:58:36.447825968 -0500
-@@ -2490,7 +2490,7 @@
- if (flagsObj.isInt()) {
- flags = flagsObj.getInt();
- } else {
-- flags = 0;
-+ flags = 4;
- }
- flagsObj.free();
-
diff --git a/net-print/cups/files/cups-1.1.20-xpdf-CESA-2004-007.patch.bz2 b/net-print/cups/files/cups-1.1.20-xpdf-CESA-2004-007.patch.bz2
deleted file mode 100644
index 4e58c2bbea38..000000000000
--- a/net-print/cups/files/cups-1.1.20-xpdf-CESA-2004-007.patch.bz2
+++ /dev/null
Binary files differ
diff --git a/net-print/cups/files/cups-1.1.20-xpdf2-underflow.patch b/net-print/cups/files/cups-1.1.20-xpdf2-underflow.patch
deleted file mode 100644
index ba6b9d498d7f..000000000000
--- a/net-print/cups/files/cups-1.1.20-xpdf2-underflow.patch
+++ /dev/null
@@ -1,81 +0,0 @@
-diff -ru XRef.cxx XRef.cxx
---- XRef.cxx 2004-10-29 15:16:45.790089001 +0200
-+++ XRef.cxx 2004-10-29 15:11:54.132168025 +0200
-@@ -66,6 +66,8 @@
- start = str->getStart();
- pos = readTrailer();
-
-+ entries = NULL;
-+
- // if there was a problem with the trailer,
- // try to reconstruct the xref table
- if (pos == 0) {
-@@ -76,7 +78,7 @@
-
- // trailer is ok - read the xref table
- } else {
-- if (size*sizeof(XRefEntry)/sizeof(XRefEntry) != size) {
-+ if ((size < 0) || (size*sizeof(XRefEntry)/sizeof(XRefEntry) != size)) {
- error(-1, "Invalid 'size' inside xref table.");
- ok = gFalse;
- errCode = errDamaged;
-@@ -181,7 +183,7 @@
- n = atoi(p);
- while ('0' <= *p && *p <= '9') ++p;
- while (isspace(*p)) ++p;
-- if (p == buf)
-+ if ((p == buf) || (n < 0)) /* must make progress */
- return 0;
- pos1 += (p - buf) + n * 20;
- }
-@@ -255,6 +257,10 @@
- }
- s[i] = '\0';
- first = atoi(s);
-+ if (first < 0) {
-+ error(-1, "Invalid 'first'");
-+ goto err2;
-+ }
- while ((c = str->lookChar()) != EOF && isspace(c)) {
- str->getChar();
- }
-@@ -266,6 +272,10 @@
- }
- s[i] = '\0';
- n = atoi(s);
-+ if (n<=0) {
-+ error(-1, "Invalid 'n'");
-+ goto err2;
-+ }
- while ((c = str->lookChar()) != EOF && isspace(c)) {
- str->getChar();
- }
-@@ -273,7 +283,7 @@
- // table size
- if (first + n > size) {
- newSize = size + 256;
-- if (newSize*sizeof(XRefEntry)/sizeof(XRefEntry) != newSize) {
-+ if ((newSize < 0) || (newSize*sizeof(XRefEntry)/sizeof(XRefEntry) != newSize)) {
- error(-1, "Invalid 'newSize'");
- goto err2;
- }
-@@ -406,6 +416,10 @@
- // look for object
- } else if (isdigit(*p)) {
- num = atoi(p);
-+ if (num < 0) {
-+ error(-1, "Invalid 'num' parameters.");
-+ return gFalse;
-+ }
- do {
- ++p;
- } while (*p && isdigit(*p));
-@@ -425,7 +439,7 @@
- if (!strncmp(p, "obj", 3)) {
- if (num >= size) {
- newSize = (num + 1 + 255) & ~255;
-- if (newSize*sizeof(XRefEntry)/sizeof(XRefEntry) != newSize) {
-+ if ((newSize < 0) || (newSize*sizeof(XRefEntry)/sizeof(XRefEntry) != newSize)) {
- error(-1, "Invalid 'obj' parameters.");
- return gFalse;
- }
diff --git a/net-print/cups/files/cups-1.1.20-zero-len-udp-dos.patch b/net-print/cups/files/cups-1.1.20-zero-len-udp-dos.patch
deleted file mode 100644
index 04ab3f2e08e4..000000000000
--- a/net-print/cups/files/cups-1.1.20-zero-len-udp-dos.patch
+++ /dev/null
@@ -1,22 +0,0 @@
---- cupsys-1.1.20final+rc1/scheduler/dirsvc.c.OLD 2004-05-27 11:04:32.000000000 -0700
-+++ cupsys-1.1.20final+rc1/scheduler/dirsvc.c 2004-08-20 19:20:08.000000000 -0700
-@@ -1093,7 +1093,7 @@
- int auth; /* Authorization status */
- int len; /* Length of name string */
- int bytes; /* Number of bytes left */
-- char packet[1540], /* Broadcast packet */
-+ char packet[1541], /* Broadcast packet */
- *pptr; /* Pointer into packet */
- struct sockaddr_in srcaddr; /* Source address */
- char srcname[1024]; /* Source hostname */
-@@ -1118,8 +1118,8 @@
- */
-
- len = sizeof(srcaddr);
-- if ((bytes = recvfrom(BrowseSocket, packet, sizeof(packet), 0,
-- (struct sockaddr *)&srcaddr, &len)) <= 0)
-+ if ((bytes = recvfrom(BrowseSocket, packet, sizeof(packet)-1, 0,
-+ (struct sockaddr *)&srcaddr, &len)) < 0)
- {
- /*
- * "Connection refused" is returned under Linux if the destination port
diff --git a/net-print/cups/files/cups-1.1.21-xpdf-CESA-2004-007.patch.bz2 b/net-print/cups/files/cups-1.1.21-xpdf-CESA-2004-007.patch.bz2
deleted file mode 100644
index f285905e8f04..000000000000
--- a/net-print/cups/files/cups-1.1.21-xpdf-CESA-2004-007.patch.bz2
+++ /dev/null
Binary files differ
diff --git a/net-print/cups/files/cupsd.conf-1.1.18 b/net-print/cups/files/cupsd.conf-1.1.18
deleted file mode 100644
index 1651905a4dd9..000000000000
--- a/net-print/cups/files/cupsd.conf-1.1.18
+++ /dev/null
@@ -1,788 +0,0 @@
-#
-# "$Id: cupsd.conf-1.1.18,v 1.2 2003/09/25 13:58:56 lanius Exp $"
-#
-# Sample configuration file for the Common UNIX Printing System (CUPS)
-# scheduler.
-#
-# Copyright 1997-2003 by Easy Software Products, all rights reserved.
-#
-# These coded instructions, statements, and computer programs are the
-# property of Easy Software Products and are protected by Federal
-# copyright law. Distribution and use rights are outlined in the file
-# "LICENSE.txt" which should have been included with this file. If this
-# file is missing or damaged please contact Easy Software Products
-# at:
-#
-# Attn: CUPS Licensing Information
-# Easy Software Products
-# 44141 Airport View Drive, Suite 204
-# Hollywood, Maryland 20636-3111 USA
-#
-# Voice: (301) 373-9603
-# EMail: cups-info@cups.org
-# WWW: http://www.cups.org
-#
-
-########################################################################
-# #
-# This is the CUPS configuration file. If you are familiar with #
-# Apache or any of the other popular web servers, we've followed the #
-# same format. Any configuration variable used here has the same #
-# semantics as the corresponding variable in Apache. If we need #
-# different functionality then a different name is used to avoid #
-# confusion... #
-# #
-########################################################################
-
-
-########
-######## Server Identity
-########
-
-#
-# ServerName: the hostname of your server, as advertised to the world.
-# By default CUPS will use the hostname of the system.
-#
-# To set the default server used by clients, see the client.conf file.
-#
-
-ServerName localhost
-
-#
-# ServerAdmin: the email address to send all complaints/problems to.
-# By default CUPS will use "root@hostname".
-#
-
-#ServerAdmin root@your.domain.com
-
-
-########
-######## Server Options
-########
-
-#
-# AccessLog: the access log file; if this does not start with a leading /
-# then it is assumed to be relative to ServerRoot. By default set to
-# "/var/log/cups/access_log"
-#
-# You can also use the special name "syslog" to send the output to the
-# syslog file or daemon.
-#
-
-#AccessLog /var/log/cups/access_log
-
-#
-# Classification: the classification level of the server. If set, this
-# classification is displayed on all pages, and raw printing is disabled.
-# The default is the empty string.
-#
-
-#Classification classified
-#Classification confidential
-#Classification secret
-#Classification topsecret
-#Classification unclassified
-
-#
-# ClassifyOverride: whether to allow users to override the classification
-# on printouts. If enabled, users can limit banner pages to before or
-# after the job, and can change the classification of a job, but cannot
-# completely eliminate the classification or banners.
-#
-# The default is off.
-#
-
-#ClassifyOverride off
-
-#
-# DataDir: the root directory for the CUPS data files.
-# By default "/usr/share/cups".
-#
-
-#DataDir /usr/share/cups
-
-#
-# DefaultCharset: the default character set to use. If not specified,
-# defaults to "utf-8". Note that this can also be overridden in
-# HTML documents...
-#
-
-#DefaultCharset utf-8
-
-#
-# DefaultLanguage: the default language if not specified by the browser.
-# If not specified, the current locale is used.
-#
-
-#DefaultLanguage en
-
-#
-# DocumentRoot: the root directory for HTTP documents that are served.
-# By default "/usr/share/doc/cups".
-#
-
-DocumentRoot /usr/share/cups/docs
-
-#
-# ErrorLog: the error log file; if this does not start with a leading /
-# then it is assumed to be relative to ServerRoot. By default set to
-# "/var/log/cups/error_log"
-#
-# You can also use the special name "syslog" to send the output to the
-# syslog file or daemon.
-#
-
-#ErrorLog /var/log/cups/error_log
-
-#
-# FileDevice: determines whether the scheduler will allow new printers
-# to be added using device URIs of the form "file:/foo/bar". The default
-# is not to allow file devices due to the potential security vulnerability
-# and due to the fact that file devices do not support raw printing.
-#
-
-#FileDevice No
-
-
-#
-# FontPath: the path to locate all font files (currently only for pstoraster)
-# By default "/usr/share/cups/fonts".
-#
-
-#FontPath /usr/share/cups/fonts
-
-#
-# LogLevel: controls the number of messages logged to the ErrorLog
-# file and can be one of the following:
-#
-# debug2 Log everything.
-# debug Log almost everything.
-# info Log all requests and state changes.
-# warn Log errors and warnings.
-# error Log only errors.
-# none Log nothing.
-#
-
-LogLevel info
-
-#
-# MaxLogSize: controls the maximum size of each log file before they are
-# rotated. Defaults to 1048576 (1MB). Set to 0 to disable log rotating.
-#
-
-#MaxLogSize 0
-
-#
-# PageLog: the page log file; if this does not start with a leading /
-# then it is assumed to be relative to ServerRoot. By default set to
-# "/var/log/cups/page_log"
-#
-# You can also use the special name "syslog" to send the output to the
-# syslog file or daemon.
-#
-
-#PageLog /var/log/cups/page_log
-
-#
-# PreserveJobHistory: whether or not to preserve the job history after a
-# job is completed, cancelled, or stopped. Default is Yes.
-#
-
-#PreserveJobHistory Yes
-
-#
-# PreserveJobFiles: whether or not to preserve the job files after a
-# job is completed, cancelled, or stopped. Default is No.
-#
-
-#PreserveJobFiles No
-
-#
-# AutoPurgeJobs: automatically purge jobs when not needed for quotas.
-# Default is No.
-#
-
-#AutoPurgeJobs No
-
-#
-# MaxCopies: maximum number of copies that a user can request. Default is
-# 100.
-#
-
-#MaxCopies 100
-
-#
-# MaxJobs: maximum number of jobs to keep in memory (active and completed.)
-# Default is 500; the value 0 is used for no limit.
-#
-
-#MaxJobs 500
-
-#
-# Printcap: the name of the printcap file. Default is /etc/printcap.
-# Leave blank to disable printcap file generation.
-#
-
-#Printcap /etc/printcap
-
-#
-# PrintcapFormat: the format of the printcap file, currently either
-# BSD or Solaris. The default is "BSD".
-#
-
-#PrintcapFormat BSD
-#PrintcapFormat Solaris
-
-#
-# PrintcapGUI: the name of the GUI options panel program to associate
-# with print queues under IRIX. The default is "/usr/bin/glpoptions"
-# from ESP Print Pro.
-#
-# This option is only used under IRIX; the options panel program
-# must accept the "-d printer" and "-o options" options and write
-# the selected printer options back to stdout on completion.
-#
-
-#PrintcapGUI /usr/bin/glpoptions
-
-#
-# RequestRoot: the directory where request files are stored.
-# By default "/var/spool/cups".
-#
-
-#RequestRoot /var/spool/cups
-
-#
-# RemoteRoot: the name of the user assigned to unauthenticated accesses
-# from remote systems. By default "remroot".
-#
-
-#RemoteRoot remroot
-
-#
-# ServerBin: the root directory for the scheduler executables.
-# By default "/usr/lib/cups".
-#
-
-#ServerBin /usr/lib/cups
-
-#
-# ServerRoot: the root directory for the scheduler.
-# By default "/etc/cups".
-#
-
-#ServerRoot /etc/cups
-
-
-########
-######## Encryption Support
-########
-
-#
-# ServerCertificate: the file to read containing the server's certificate.
-# Defaults to "/etc/cups/ssl/server.crt".
-#
-
-#ServerCertificate /etc/cups/ssl/server.crt
-
-#
-# ServerKey: the file to read containing the server's key.
-# Defaults to "/etc/cups/ssl/server.key".
-#
-
-#ServerKey /etc/cups/ssl/server.key
-
-
-########
-######## Filter Options
-########
-
-#
-# User/Group: the user and group the server runs under. Normally this
-# must be lp and lp, however you can configure things for another
-# user or group as needed.
-#
-# Note: the server must be run initially as root to support the
-# default IPP port of 631. It changes users whenever an external
-# program is run, or if the RunAsUser directive is specified...
-#
-
-User lp
-Group lp
-
-#
-# RIPCache: the amount of memory that each RIP should use to cache
-# bitmaps. The value can be any real number followed by "k" for
-# kilobytes, "m" for megabytes, "g" for gigabytes, or "t" for tiles
-# (1 tile = 256x256 pixels.) Defaults to "8m" (8 megabytes).
-#
-
-#RIPCache 8m
-
-#
-# TempDir: the directory to put temporary files in. This directory must be
-# writable by the user defined above! Defaults to "/var/spool/cups/tmp" or
-# the value of the TMPDIR environment variable.
-#
-
-#TempDir /var/spool/cups/tmp
-
-#
-# FilterLimit: sets the maximum cost of all job filters that can be run
-# at the same time. A limit of 0 means no limit. A typical job may need
-# a filter limit of at least 200; limits less than the minimum required
-# by a job force a single job to be printed at any time.
-#
-# The default limit is 0 (unlimited).
-#
-
-#FilterLimit 0
-
-########
-######## Network Options
-########
-
-#
-# Ports/addresses that we listen to. The default port 631 is reserved
-# for the Internet Printing Protocol (IPP) and is what we use here.
-#
-# You can have multiple Port/Listen lines to listen to more than one
-# port or address, or to restrict access:
-#
-# Port 80
-# Port 631
-# Listen hostname
-# Listen hostname:80
-# Listen hostname:631
-# Listen 1.2.3.4
-# Listen 1.2.3.4:631
-#
-# NOTE: Unfortunately, most web browsers don't support TLS or HTTP Upgrades
-# for encryption. If you want to support web-based encryption you'll
-# probably need to listen on port 443 (the "https" port...)
-#
-
-#Port 80
-#Port 443
-##Port 631
-Listen 127.0.0.1:631
-
-#
-# HostNameLookups: whether or not to do lookups on IP addresses to get a
-# fully-qualified hostname. This defaults to Off for performance reasons...
-#
-
-#HostNameLookups On
-
-#
-# KeepAlive: whether or not to support the Keep-Alive connection
-# option. Default is on.
-#
-
-#KeepAlive On
-
-#
-# KeepAliveTimeout: the timeout before Keep-Alive connections are
-# automatically closed. Default is 60 seconds.
-#
-
-#KeepAliveTimeout 60
-
-#
-# MaxClients: controls the maximum number of simultaneous clients that
-# will be handled. Defaults to 100.
-#
-
-#MaxClients 100
-
-#
-# MaxClientsPerHost: controls the maximum number of simultaneous clients that
-# will be handled from a specific host. Defaults to 10 or 1/10th of the
-# MaxClients setting, whichever is larger. A value of 0 specifies the
-# automatic (10 or 1/10th) setting.
-#
-
-#MaxClientsPerHost 0
-
-#
-# MaxRequestSize: controls the maximum size of HTTP requests and print files.
-# Set to 0 to disable this feature (defaults to 0.)
-#
-
-#MaxRequestSize 0
-
-#
-# Timeout: the timeout before requests time out. Default is 300 seconds.
-#
-
-#Timeout 300
-
-
-########
-######## Browsing Options
-########
-
-#
-# Browsing: whether or not to broadcast and/or listen for CUPS printer
-# information on the network. Enabled by default.
-#
-
-#Browsing On
-
-#
-# BrowseProtocols: which protocols to use for browsing. Can be
-# any of the following separated by whitespace and/or commas:
-#
-# all - Use all supported protocols.
-# cups - Use the CUPS browse protocol.
-# slp - Use the SLPv2 protocol.
-#
-# The default is "cups".
-#
-# NOTE: If you choose to use SLPv2, it is *strongly* recommended that
-# you have at least one SLP Directory Agent (DA) on your
-# network. Otherwise, browse updates can take several seconds,
-# during which the scheduler will not response to client
-# requests.
-#
-
-#BrowseProtocols cups
-
-#
-# BrowseAddress: specifies a broadcast address to be used. By
-# default browsing information is not sent!
-#
-# Note: HP-UX does not properly handle broadcast unless you have a
-# Class A, B, C, or D netmask (i.e. no CIDR support).
-#
-# Note: Using the "global" broadcast address (255.255.255.255) will
-# activate a Linux demand-dial link with the default configuration.
-# If you have a LAN as well as the dial-up link, use the LAN's
-# broadcast address.
-#
-# The @LOCAL address broadcasts to all non point-to-point interfaces.
-# For example, if you have a LAN and a dial-up link, @LOCAL would
-# send printer updates to the LAN but not to the dial-up link.
-# Similarly, the @IF(name) address sends to the named network
-# interface, e.g. @IF(eth0) under Linux. Interfaces are refreshed
-# automatically (no more than once every 60 seconds), so they can
-# be used on dynamically-configured interfaces, e.g. PPP, 802.11, etc.
-#
-
-#BrowseAddress x.y.z.255
-#BrowseAddress x.y.255.255
-#BrowseAddress x.255.255.255
-#BrowseAddress 255.255.255.255
-#BrowseAddress @LOCAL
-#BrowseAddress @IF(name)
-
-#
-# BrowseShortNames: whether or not to use "short" names for remote printers
-# when possible (e.g. "printer" instead of "printer@host".) Enabled by
-# default.
-#
-
-#BrowseShortNames Yes
-
-#
-# BrowseAllow: specifies an address mask to allow for incoming browser
-# packets. The default is to allow packets from all addresses.
-#
-# BrowseDeny: specifies an address mask to deny for incoming browser
-# packets. The default is to deny packets from no addresses.
-#
-# Both "BrowseAllow" and "BrowseDeny" accept the following notations for
-# addresses:
-#
-# All
-# None
-# *.domain.com
-# .domain.com
-# host.domain.com
-# nnn.*
-# nnn.nnn.*
-# nnn.nnn.nnn.*
-# nnn.nnn.nnn.nnn
-# nnn.nnn.nnn.nnn/mm
-# nnn.nnn.nnn.nnn/mmm.mmm.mmm.mmm
-# @LOCAL
-# @IF(name)
-#
-# The hostname/domainname restrictions only work if you have turned hostname
-# lookups on!
-#
-
-#BrowseAllow address
-#BrowseDeny address
-
-#
-# BrowseInterval: the time between browsing updates in seconds. Default
-# is 30 seconds.
-#
-# Note that browsing information is sent whenever a printer's state changes
-# as well, so this represents the maximum time between updates.
-#
-# Set this to 0 to disable outgoing broadcasts so your local printers are
-# not advertised but you can still see printers on other hosts.
-#
-
-#BrowseInterval 30
-
-#
-# BrowseOrder: specifies the order of BrowseAllow/BrowseDeny comparisons.
-#
-
-#BrowseOrder allow,deny
-#BrowseOrder deny,allow
-
-#
-# BrowsePoll: poll the named server(s) for printers
-#
-
-#BrowsePoll address:port
-
-#
-# BrowsePort: the port used for UDP broadcasts. By default this is
-# the IPP port; if you change this you need to do it on all servers.
-# Only one BrowsePort is recognized.
-#
-
-#BrowsePort 631
-
-#
-# BrowseRelay: relay browser packets from one address/network to another.
-#
-
-#BrowseRelay source-address destination-address
-#BrowseRelay @IF(src) @IF(dst)
-
-#
-# BrowseTimeout: the timeout for network printers - if we don't
-# get an update within this time the printer will be removed
-# from the printer list. This number definitely should not be
-# less the BrowseInterval value for obvious reasons. Defaults
-# to 300 seconds.
-#
-
-#BrowseTimeout 300
-
-#
-# ImplicitClasses: whether or not to use implicit classes.
-#
-# Printer classes can be specified explicitly in the classes.conf
-# file, implicitly based upon the printers available on the LAN, or
-# both.
-#
-# When ImplicitClasses is On, printers on the LAN with the same name
-# (e.g. Acme-LaserPrint-1000) will be put into a class with the same
-# name. This allows you to setup multiple redundant queues on a LAN
-# without a lot of administrative difficulties. If a user sends a
-# job to Acme-LaserPrint-1000, the job will go to the first available
-# queue.
-#
-# Enabled by default.
-#
-
-#ImplicitClasses On
-
-#
-# ImplicitAnyClasses: whether or not to create "AnyPrinter" implicit
-# classes.
-#
-# When ImplicitAnyClasses is On and a local queue of the same name
-# exists, e.g. "printer", "printer@server1", "printer@server1", then
-# an implicit class called "Anyprinter" is created instead.
-#
-# When ImplicitAnyClasses is Off, implicit classes are not created
-# when there is a local queue of the same name.
-#
-# Disabled by default.
-#
-
-#ImplicitAnyCLasses Off
-
-#
-# HideImplicitMembers: whether or not to show the members of an
-# implicit class.
-#
-# When HideImplicitMembers is On, any remote printers that are
-# part of an implicit class are hidden from the user, who will
-# then only see a single queue even though many queues will be
-# supporting the implicit class.
-#
-# Enabled by default.
-#
-
-#HideImplicitMembers On
-
-
-########
-######## Security Options
-########
-
-#
-# SystemGroup: the group name for "System" (printer administration)
-# access. The default varies depending on the operating system, but
-# will be "sys", "system", or "root" (checked for in that order.)
-#
-
-SystemGroup lp
-
-#
-# RootCertDuration: How frequently the root certificate is regenerated.
-# Defaults to 300 seconds.
-#
-
-#RootCertDuration 300
-
-#
-# Access permissions for each directory served by the scheduler.
-# Locations are relative to DocumentRoot...
-#
-# AuthType: the authorization to use:
-#
-# None - Perform no authentication
-# Basic - Perform authentication using the HTTP Basic method.
-# Digest - Perform authentication using the HTTP Digest method.
-#
-# (Note: local certificate authentication can be substituted by
-# the client for Basic or Digest when connecting to the
-# localhost interface)
-#
-# AuthClass: the authorization class; currently only "Anonymous", "User",
-# "System" (valid user belonging to group SystemGroup), and "Group"
-# (valid user belonging to the specified group) are supported.
-#
-# AuthGroupName: the group name for "Group" authorization.
-#
-# Order: the order of Allow/Deny processing.
-#
-# Allow: allows access from the specified hostname, domain, IP address,
-# network, or interface.
-#
-# Deny: denies access from the specified hostname, domain, IP address,
-# network, or interface.
-#
-# Both "Allow" and "Deny" accept the following notations for addresses:
-#
-# All
-# None
-# *.domain.com
-# .domain.com
-# host.domain.com
-# nnn.*
-# nnn.nnn.*
-# nnn.nnn.nnn.*
-# nnn.nnn.nnn.nnn
-# nnn.nnn.nnn.nnn/mm
-# nnn.nnn.nnn.nnn/mmm.mmm.mmm.mmm
-# @LOCAL
-# @IF(name)
-#
-# The host and domain address require that you enable hostname lookups
-# with "HostNameLookups On" above.
-#
-# The @LOCAL address allows or denies from all non point-to-point
-# interfaces. For example, if you have a LAN and a dial-up link,
-# @LOCAL could allow connections from the LAN but not from the dial-up
-# link. Similarly, the @IF(name) address allows or denies from the
-# named network interface, e.g. @IF(eth0) under Linux. Interfaces are
-# refreshed automatically (no more than once every 60 seconds), so
-# they can be used on dynamically-configured interfaces, e.g. PPP,
-# 802.11, etc.
-#
-# Encryption: whether or not to use encryption; this depends on having
-# the OpenSSL library linked into the CUPS library and scheduler.
-#
-# Possible values:
-#
-# Always - Always use encryption (SSL)
-# Never - Never use encryption
-# Required - Use TLS encryption upgrade
-# IfRequested - Use encryption if the server requests it
-#
-# The default value is "IfRequested".
-#
-
-<Location />
-Order Deny,Allow
-Deny From All
-Allow From 127.0.0.1
-</Location>
-
-#<Location /classes>
-#
-# You may wish to limit access to printers and classes, either with Allow
-# and Deny lines, or by requiring a username and password.
-#
-#</Location>
-
-#<Location /classes/name>
-#
-# You may wish to limit access to printers and classes, either with Allow
-# and Deny lines, or by requiring a username and password.
-#
-#</Location>
-
-<Location /jobs>
-#
-# You may wish to limit access to job operations, either with Allow
-# and Deny lines, or by requiring a username and password.
-#
-AuthType Basic
-AuthClass System
-
-</Location>
-
-#<Location /printers>
-#
-# You may wish to limit access to printers and classes, either with Allow
-# and Deny lines, or by requiring a username and password.
-#
-#</Location>
-
-#<Location /printers/name>
-#
-# You may wish to limit access to printers and classes, either with Allow
-# and Deny lines, or by requiring a username and password.
-#
-
-## Anonymous access (default)
-#AuthType None
-
-## Require a username and password (Basic authentication)
-#AuthType Basic
-#AuthClass User
-
-## Require a username and password (Digest/MD5 authentication)
-#AuthType Digest
-#AuthClass User
-
-## Restrict access to local domain
-#Order Deny,Allow
-#Deny From All
-#Allow From .mydomain.com
-#</Location>
-
-<Location /admin>
-#
-# You definitely will want to limit access to the administration functions.
-# The default configuration requires a local connection from a user who
-# is a member of the system group to do any admin tasks. You can change
-# the group name using the SystemGroup directive.
-#
-
-AuthType Basic
-AuthClass System
-
-## Restrict access to local domain
-Order Deny,Allow
-Deny From All
-Allow From 127.0.0.1
-
-#Encryption Required
-</Location>
-
-#
-# End of "$Id: cupsd.conf-1.1.18,v 1.2 2003/09/25 13:58:56 lanius Exp $".
-#
diff --git a/net-print/cups/files/digest-cups-1.1.20-r5 b/net-print/cups/files/digest-cups-1.1.20-r5
deleted file mode 100644
index 002ebb34be36..000000000000
--- a/net-print/cups/files/digest-cups-1.1.20-r5
+++ /dev/null
@@ -1 +0,0 @@
-MD5 09d0be2bad1b0617bc0eba6eef81f6e9 cups-1.1.20-source.tar.bz2 3741510
diff --git a/net-print/cups/files/digest-cups-1.1.22 b/net-print/cups/files/digest-cups-1.1.22
deleted file mode 100644
index dae8de805e2e..000000000000
--- a/net-print/cups/files/digest-cups-1.1.22
+++ /dev/null
@@ -1 +0,0 @@
-MD5 fe0a1b0fedccfe8b2e35e0cea1e5f0a9 cups-1.1.22-source.tar.bz2 8527045
diff --git a/net-print/cups/files/str920.patch b/net-print/cups/files/str920.patch
deleted file mode 100644
index 27a3f12c5b5c..000000000000
--- a/net-print/cups/files/str920.patch
+++ /dev/null
@@ -1,181 +0,0 @@
-Index: ipp.c
-===================================================================
-RCS file: /development/cvs/cups/scheduler/ipp.c,v
-retrieving revision 1.233
-diff -u -r1.233 ipp.c
---- scheduler/ipp.c 23 Aug 2004 18:36:50 -0000 1.233
-+++ scheduler/ipp.c 4 Oct 2004 20:19:17 -0000
-@@ -1222,7 +1222,9 @@
- }
-
- LogMessage(L_INFO, "Setting %s device-uri to \"%s\" (was \"%s\".)",
-- printer->name, attr->values[0].string.text, printer->device_uri);
-+ printer->name,
-+ cupsdSanitizeURI(attr->values[0].string.text, line, sizeof(line)),
-+ cupsdSanitizeURI(printer->device_uri, resource, sizeof(resource)));
-
- SetString(&printer->device_uri, attr->values[0].string.text);
- }
-Index: job.c
-===================================================================
-RCS file: /development/cvs/cups/scheduler/job.c,v
-retrieving revision 1.231
-diff -u -r1.231 job.c
---- scheduler/job.c 4 Oct 2004 19:40:35 -0000 1.231
-+++ scheduler/job.c 4 Oct 2004 20:19:17 -0000
-@@ -1202,6 +1202,7 @@
- classification[1024], /* CLASSIFICATION environment variable */
- content_type[1024], /* CONTENT_TYPE environment variable */
- device_uri[1024], /* DEVICE_URI environment variable */
-+ sani_uri[1024], /* Sanitized DEVICE_URI env var */
- ppd[1024], /* PPD environment variable */
- class_name[255], /* CLASS environment variable */
- printer_name[255], /* PRINTER environment variable */
-@@ -1803,7 +1804,12 @@
- envp[envc] = NULL;
-
- for (i = 0; i < envc; i ++)
-- LogMessage(L_DEBUG, "StartJob: envp[%d]=\"%s\"", i, envp[i]);
-+ if (strncmp(envp[i], "DEVICE_URI=", 11))
-+ LogMessage(L_DEBUG, "StartJob: envp[%d]=\"%s\"", i, envp[i]);
-+ else
-+ LogMessage(L_DEBUG, "StartJob: envp[%d]=\"DEVICE_URI=%s\"", i,
-+ cupsdSanitizeURI(printer->device_uri, sani_uri,
-+ sizeof(sani_uri)));
-
- current->current_file ++;
-
-Index: printers.c
-===================================================================
-RCS file: /development/cvs/cups/scheduler/printers.c,v
-retrieving revision 1.164
-diff -u -r1.164 printers.c
---- scheduler/printers.c 4 Oct 2004 19:40:35 -0000 1.164
-+++ scheduler/printers.c 4 Oct 2004 20:19:17 -0000
-@@ -43,6 +43,7 @@
- * ValidateDest() - Validate a printer/class destination.
- * WritePrintcap() - Write a pseudo-printcap file for older
- * applications that need it...
-+ * cupsdSanitizeURI() - Sanitize a device URI...
- * write_irix_config() - Update the config files used by the IRIX
- * desktop tools.
- * write_irix_state() - Update the status files used by IRIX printing
-@@ -1150,11 +1151,7 @@
- SetPrinterAttrs(printer_t *p) /* I - Printer to setup */
- {
- char uri[HTTP_MAX_URI]; /* URI for printer */
-- char method[HTTP_MAX_URI], /* Method portion of URI */
-- username[HTTP_MAX_URI], /* Username portion of URI */
-- host[HTTP_MAX_URI], /* Host portion of URI */
-- resource[HTTP_MAX_URI]; /* Resource portion of URI */
-- int port; /* Port portion of URI */
-+ char resource[HTTP_MAX_URI]; /* Resource portion of URI */
- int i; /* Looping var */
- char filename[1024]; /* Name of PPD file */
- int num_media; /* Number of media options */
-@@ -1360,12 +1357,7 @@
- * http://..., ipp://..., etc.
- */
-
-- httpSeparate(p->device_uri, method, username, host, &port, resource);
-- if (port)
-- snprintf(uri, sizeof(uri), "%s://%s:%d%s", method, host, port,
-- resource);
-- else
-- snprintf(uri, sizeof(uri), "%s://%s%s", method, host, resource);
-+ cupsdSanitizeURI(p->device_uri, uri, sizeof(uri));
- }
- else
- {
-@@ -2172,6 +2164,74 @@
- */
-
- cupsFileClose(fp);
-+}
-+
-+
-+/*
-+ * 'cupsdSanitizeURI()' - Sanitize a device URI...
-+ */
-+
-+char * /* O - New device URI */
-+cupsdSanitizeURI(const char *uri, /* I - Original device URI */
-+ char *buffer, /* O - New device URI */
-+ int buflen) /* I - Size of new device URI buffer */
-+{
-+ char *start, /* Start of data after scheme */
-+ *slash, /* First slash after scheme:// */
-+ *ptr; /* Pointer into user@host:port part */
-+
-+
-+ /*
-+ * Range check input...
-+ */
-+
-+ if (!uri || !buffer || buflen < 2)
-+ return (NULL);
-+
-+ /*
-+ * Copy the device URI to the new buffer...
-+ */
-+
-+ strlcpy(buffer, uri, buflen);
-+
-+ /*
-+ * Find the end of the scheme:// part...
-+ */
-+
-+ if ((ptr = strchr(buffer, ':')) == NULL)
-+ return (buffer); /* No scheme: part... */
-+
-+ for (start = ptr + 1; *start; start ++)
-+ if (*start != '/')
-+ break;
-+
-+ /*
-+ * Find the next slash (/) in the URI...
-+ */
-+
-+ if ((slash = strchr(start, '/')) == NULL)
-+ slash = start + strlen(start); /* No slash, point to the end */
-+
-+ /*
-+ * Check for an @ sign before the slash...
-+ */
-+
-+ if ((ptr = strchr(start, '@')) != NULL && ptr < slash)
-+ {
-+ /*
-+ * Found an @ sign and it is before the resource part, so we have
-+ * an authentication string. Copy the remaining URI over the
-+ * authentication string...
-+ */
-+
-+ cups_strcpy(start, ptr + 1);
-+ }
-+
-+ /*
-+ * Return the new device URI...
-+ */
-+
-+ return (buffer);
- }
-
-
-Index: printers.h
-===================================================================
-RCS file: /development/cvs/cups/scheduler/printers.h,v
-retrieving revision 1.39
-diff -u -r1.39 printers.h
---- scheduler/printers.h 23 Aug 2004 18:00:59 -0000 1.39
-+++ pscheduler/rinters.h 4 Oct 2004 20:19:17 -0000
-@@ -126,6 +126,9 @@
- cups_ptype_t *dtype);
- extern void WritePrintcap(void);
-
-+extern char *cupsdSanitizeURI(const char *uri, char *buffer,
-+ int buflen);
-+
-
- /*
- * End of "$Id: str920.patch,v 1.1 2004/10/06 13:17:28 lanius Exp $".