Revbump with updated udev rules to avoid b0rkage with new stable udev

(Portage version: 2.1.1-r2)

1 files changed, 352 insertions, 0 deletions

diff --git a/net-misc/zaptel/zaptel-1.2.9.1-r1.ebuild b/net-misc/zaptel/zaptel-1.2.9.1-r1.ebuild
new file mode 100644
index 000000000000..9ac55073aea5
--- /dev/null
+++ b/net-misc/zaptel/zaptel-1.2.9.1-r1.ebuild
@@ -0,0 +1,352 @@
+# Copyright 1999-2006 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/net-misc/zaptel/zaptel-1.2.9.1-r1.ebuild,v 1.1 2006/11/27 14:36:00 gustavoz Exp $
+
+inherit toolchain-funcs eutils linux-mod
+
+## NOTE:
+#
+#
+
+BRI_VERSION="0.3.0-PRE-1s"
+FLORZ_VERSION="0.3.0-PRE-1o_florz-12"
+
+IUSE="bri ecmark ecmark2 ecmark3 ecaggressive eckb1 ecmg2 ecsteve ecsteve2 florz rtc ukcid watchdog zapras zapnet"
+
+MY_P="${P/_/-}"
+
+DESCRIPTION="Drivers for Digium and ZapataTelephony cards"
+HOMEPAGE="http://www.asterisk.org"
+SRC_URI="http://ftp.digium.com/pub/zaptel/releases/${MY_P}.tar.gz
+	 bri? ( http://www.junghanns.net/downloads/bristuff-${BRI_VERSION}.tar.gz )
+	 florz? ( http://www.netdomination.org/pub/asterisk/zaphfc_${FLORZ_VERSION}.diff.gz )"
+
+S="${WORKDIR}/${MY_P}"
+
+S_BRI="${WORKDIR}/bristuff-${BRI_VERSION}"
+
+SLOT="0"
+LICENSE="GPL-2"
+KEYWORDS="~amd64 ~ppc x86"
+
+DEPEND="virtual/libc
+	virtual/linux-sources
+	>=dev-libs/newt-0.50.0"
+
+# list of echo canceller use flags,
+# first active in this list is selected (=order does matter)
+ZAP_EC_FLAGS="ecmark ecmark2 ecmark3 ecsteve ecsteve2 eckb1 ecmg2"
+
+### Begin: Helper functions
+
+select_echo_cancel() {
+	local myEC=""
+
+	for x in ${ZAP_EC_FLAGS}; do
+		if use $x; then
+			myEC=$(echo "$x" | sed -e "s:^ec::" | tr '[:lower:]' '[:upper:]')
+			break;
+		fi
+	done
+
+	echo ${myEC}
+}
+
+zconfig_disable() {
+	if grep -q "${1}" ${S}/zconfig.h; then
+		# match a little more than ${1} so we can use zconfig_disable
+		# to disable all echo cancellers in zconfig.h w/o calling it several times
+		sed -i -e "s:^[ \t]*#define[ \t]\+\(${1}[a-zA-Z0-9_-]*\).*:#undef \1:" \
+			${S}/zconfig.h
+	fi
+
+	return $?
+}
+
+zconfig_enable() {
+	if grep -q "${1}" ${S}/zconfig.h; then
+		sed -i  -e "s:^/\*[ \t]*#define[ \t]\+\(${1}\).*:#define \1:" \
+			-e "s:^[ \t]*#undef[ \t]\+\(${1}\).*:#define \1:" \
+			${S}/zconfig.h
+	fi
+
+	return $?
+}
+
+### End: Helper functions
+
+pkg_setup() {
+	local result=0 numec=0
+
+	linux-mod_pkg_setup
+
+	einfo "Running pre-flight checks..."
+
+	# basic zaptel checks
+	if ! linux_chkconfig_present CRC_CCITT; then
+		echo
+		eerror "Your kernel lacks CRC_CCIT support!"
+		eerror "Enable CONFIG_CRC_CCIT!"
+		result=$((result+1))
+	fi
+
+	# check if multiple echo cancellers have been selected
+	for x in ${ZAP_EC_FLAGS}; do
+		use $x && numec=$((numec+1))
+	done
+	if [[ $numec -gt 1 ]]; then
+		# multiple flags are active, only the first in the ZAP_EC_FLAGS list
+		# will be used, make sure the user knows about this
+		echo
+		ewarn "Multiple echo canceller flags are active but only one will be used!"
+		ewarn "Selected: $(select_echo_cancel)"
+	fi
+
+	# we need at least HDLC generic support
+	if use zapnet && ! linux_chkconfig_present HDLC; then
+		echo
+		eerror "zapnet: Your kernel lacks HDLC support!"
+		eerror "zapnet: Enable CONFIG_HDLC* to use zaptel network support!"
+		result=$((result+1))
+	fi
+
+	# zapras needs PPP support
+	if use zapras && ! linux_chkconfig_present PPP; then
+		echo
+		eerror "zapras: Your kernel lacks PPP support!"
+		eerror "zapras: Enable CONFIG_PPP* to use zaptel ras support!"
+		result=$((result+1))
+	fi
+
+	# rtc needs linux-2.6 and CONFIG_RTC
+	if use rtc; then
+		if ! kernel_is 2 6; then
+			echo
+			eerror "rtc: >=Linux-2.6.0 is needed for rtc support!"
+			result=$((result+1))
+		fi
+
+		if ! linux_chkconfig_present RTC; then
+			eerror "rtc: Your kernel lacks RealTime-Clock support!"
+			result=$((result+1))
+		fi
+	fi
+
+	if [[ $result -gt 0 ]]; then
+		echo
+		ewarn "One or more of the neccessary precondition(s) is/are not met!"
+		ewarn "Look at the messages above, resolve the problem (or disable the use-flag) and try again"
+		echo
+
+		if [[ $result -lt 3 ]]; then
+			eerror "[$result Error(s)] Zaptel is not happy :("
+		else
+			eerror "[$result Error(s)] You're making zaptel cry :'("
+		fi
+		die "[$result] Precondition(s) not met"
+	fi
+
+	echo
+	einfo "Zaptel is happy and continues... :)"
+}
+
+src_unpack() {
+	unpack ${A}
+
+	cd ${S}
+	epatch ${FILESDIR}/${P}-gentoo.diff
+	epatch ${FILESDIR}/zaptel-1.2.9.1-gcc411_is_a_retard-kbuild.patch
+	epatch ${FILESDIR}/zaptel-1.2.9.1-ar.patch
+
+	use ukcid && \
+		epatch ${FILESDIR}/${PN}-1.2.0-ukcid.patch
+
+	# try to apply bristuff patch
+	if use bri; then
+		# fix for userpriv
+		chmod -R a=rwX ${S_BRI}
+
+		einfo "Patching zaptel w/ BRI stuff (${BRI_VERSION})"
+		epatch ${S_BRI}/patches/zaptel.patch
+
+		cd ${S_BRI}
+
+		if use florz; then
+			einfo "Using florz patches (${FLORZ_VERSION}) for zaphfc"
+
+			# remove as soon as there's a new florz patch available
+			sed -i -e "s:zaptel-1\.2\.5:zaptel-1.2.6:g" \
+				${WORKDIR}/zaphfc_${FLORZ_VERSION}.diff
+
+			epatch ${WORKDIR}/zaphfc_${FLORZ_VERSION}.diff
+		fi
+
+		# patch includes
+		sed -i  -e "s:^#include.*zaptel\.h.*:#include <zaptel.h>:" \
+			qozap/qozap.c \
+			zaphfc/zaphfc.c \
+			cwain/cwain.c
+
+		# patch makefiles
+		sed -i  -e "s:^ZAP[\t ]*=.*:ZAP=-I${S}:" \
+			-e "s:^MODCONF=.*:MODCONF=/etc/modules.d/zaptel:" \
+			-e "s:linux-2.6:linux:g" \
+			qozap/Makefile \
+			zaphfc/Makefile \
+			cwain/Makefile
+
+		sed -i  -e "s:^\(CFLAGS+=-I. \).*:\1 \$(ZAP):" \
+			zaphfc/Makefile
+
+		cd ${S}
+	fi
+
+### Configuration changes
+	local myEC
+
+	# prepare zconfig.h
+	myEC=$(select_echo_cancel)
+	if [[ -n "${myEC}" ]]; then
+		einfo "Selected echo canceller: ${myEC}"
+		# disable default first, set new selected ec afterwards
+		zconfig_disable ECHO_CAN
+		zconfig_enable ECHO_CAN_${myEC}
+	fi
+
+	# enable rtc support on 2.6
+	if use rtc && linux_chkconfig_present RTC && kernel_is 2 6; then
+		einfo "Enabling ztdummy RTC support"
+		zconfig_enable USE_RTC
+	fi
+
+	# enable agressive echo surpression
+	use ecaggressive && \
+		zconfig_enable AGGRESSIVE_SUPPRESSOR
+
+	# ppp ras support
+	use zapras && \
+		zconfig_enable CONFIG_ZAPATA_PPP
+
+	# frame relay, syncppp...
+	use zapnet && \
+		zconfig_enable CONFIG_ZAPATA_NET
+
+	# zaptel watchdog
+	use watchdog && \
+		zconfig_enable CONFIG_ZAPTEL_WATCHDOG
+}
+
+src_compile() {
+	# build
+	make KVERS=${KV_FULL} \
+	     KSRC=${KV_DIR} ARCH=$(tc-arch-kernel) || die
+
+	if use bri; then
+		cd ${S_BRI}
+		for x in cwain qozap zaphfc; do
+			einfo "Building ${x}..."
+			make KVERS=${KV_FULL} \
+				KSRC=/usr/src/linux \
+				ARCH=$(tc-arch-kernel) \
+				-C ${x} || die "make ${x} failed"
+		done
+	fi
+}
+
+src_install() {
+	make INSTALL_PREFIX=${D} ARCH=$(tc-arch-kernel) \
+	     KVERS=${KV_FULL} KSRC=/usr/src/linux install || die
+
+	dodoc ChangeLog README README.udev README.Linux26 README.fxsusb zaptel.init
+	dodoc zaptel.conf.sample LICENSE zaptel.sysconfig
+
+	# additional tools
+	dobin ztmonitor ztspeed zttest
+
+	# install all header files, several packages need the complete set
+	# (e.g. sangoma wanpipe)
+	insinto /usr/include/zaptel
+	doins *.h
+
+	if use bri; then
+		einfo "Installing bri"
+		cd ${S_BRI}
+
+		insinto /lib/modules/${KV_FULL}/misc
+		doins qozap/qozap.${KV_OBJ}
+		doins zaphfc/zaphfc.${KV_OBJ}
+		doins cwain/cwain.${KV_OBJ}
+
+		# install example configs for octoBRI and quadBRI
+		insinto /etc
+		doins qozap/zaptel.conf.octoBRI
+		newins qozap/zaptel.conf zaptel.conf.quadBRI
+		newins zaphfc/zaptel.conf zaptel.conf.zaphfc
+
+		insinto /etc/asterisk
+		doins qozap/zapata.conf.octoBRI
+		newins qozap/zapata.conf zapata.conf.quadBRI
+		newins zaphfc/zapata.conf zapata.conf.zaphfc
+
+		docinto bristuff
+		dodoc CHANGES INSTALL
+
+		docinto bristuff/qozap
+		dodoc qozap/LICENSE qozap/TODO qozap/*.conf*
+
+		docinto bristuff/zaphfc
+		dodoc zaphfc/LICENSE zaphfc/*.conf
+
+		docinto bristuff/cwain
+		dodoc cwain/TODO cwain/LICENSE
+
+		cd ${S}
+	fi
+
+	# install init script
+	newinitd ${FILESDIR}/zaptel.rc6 zaptel
+	newconfd ${FILESDIR}/zaptel.confd zaptel
+
+	# install devfsd rule file
+	insinto /etc/devfs.d
+	newins ${FILESDIR}/zaptel.devfsd zaptel
+
+	# install udev rule file
+	insinto /etc/udev/rules.d
+	newins ${FILESDIR}/zaptel.udevd 10-zaptel.rules
+
+	# fix permissions if there's no udev / devfs around
+	if [[ -d ${D}/dev/zap ]]; then
+		chown -R root:dialout	${D}/dev/zap
+		chmod -R u=rwX,g=rwX,o= ${D}/dev/zap
+	fi
+}
+
+pkg_postinst() {
+	linux-mod_pkg_postinst
+
+	echo
+	einfo "Use the /etc/init.d/zaptel script to load zaptel.conf settings on startup!"
+	echo
+
+	if use bri; then
+		einfo "Bristuff configs have been merged as:"
+		einfo ""
+		einfo "${ROOT}etc/"
+		einfo "    zaptel.conf.zaphfc"
+		einfo "    zaptel.conf.quadBRI"
+		einfo "    zaptel.conf.octoBRI"
+		einfo ""
+		einfo "${ROOT}etc/asterisk/"
+		einfo "    zapata.conf.zaphfc"
+		einfo "    zapata.conf.quadBRI"
+		einfo "    zapata.conf.octoBRI"
+		echo
+	fi
+
+	# fix permissions if there's no udev / devfs around
+	if [[ -d ${ROOT}dev/zap ]]; then
+		chown -R root:dialout	${ROOT}dev/zap
+		chmod -R u=rwX,g=rwX,o= ${ROOT}dev/zap
+	fi
+}