Added support for qmail-spp.

(Portage version: 2.1_pre10-r3)

3 files changed, 471 insertions, 1 deletions

diff --git a/mail-mta/netqmail/ChangeLog b/mail-mta/netqmail/ChangeLog
index e44c2239c4b4..6819a18475c0 100644
--- a/mail-mta/netqmail/ChangeLog
+++ b/mail-mta/netqmail/ChangeLog
@@ -1,6 +1,12 @@
 # ChangeLog for mail-mta/netqmail
 # Copyright 1999-2006 Gentoo Foundation; Distributed under the GPL v2
-# $Header: /var/cvsroot/gentoo-x86/mail-mta/netqmail/ChangeLog,v 1.6 2006/04/28 20:48:48 hansmi Exp $
+# $Header: /var/cvsroot/gentoo-x86/mail-mta/netqmail/ChangeLog,v 1.7 2006/05/06 18:09:50 hansmi Exp $
+
+*netqmail-1.05-r2 (06 May 2006)
+
+  06 May 2006; Michael Hanselmann <hansmi@gentoo.org>
+  +netqmail-1.05-r2.ebuild:
+  Added support for qmail-spp.
 
   28 Apr 2006; Michael Hanselmann <hansmi@gentoo.org> -netqmail-1.05.ebuild:
   Remove old ebuild.
diff --git a/mail-mta/netqmail/files/digest-netqmail-1.05-r2 b/mail-mta/netqmail/files/digest-netqmail-1.05-r2
new file mode 100644
index 000000000000..4b66db348c5a
--- /dev/null
+++ b/mail-mta/netqmail/files/digest-netqmail-1.05-r2
@@ -0,0 +1,12 @@
+MD5 39b6f70f65056472ff97ab40c1dba7b4 big-todo.103.patch 5546
+RMD160 a16a429796d869b8217e42b7ddb607c95d9bbcd8 big-todo.103.patch 5546
+SHA256 afa0a249e3271badd442f0bdae39997d9fe536157d8a0d62b6706f3dfcd11a72 big-todo.103.patch 5546
+MD5 ecbd06a11022e61e5a4dda38c78c950e netqmail-1.05-tls-smtpauth-20060105.patch 147837
+RMD160 18a3edd3ea7e7a8e4d6cadbd3c0bd5e8cb041caa netqmail-1.05-tls-smtpauth-20060105.patch 147837
+SHA256 326af9647e752e158f7672ca3fb592fe23c5f44502ddfcd6b5b6bc6c7ecf4c27 netqmail-1.05-tls-smtpauth-20060105.patch 147837
+MD5 4c03848af9d37e281f3b82cc59230d9b netqmail-1.05.tar.gz 252264
+RMD160 e5bd8557c58a2686233449254b146e74389a7652 netqmail-1.05.tar.gz 252264
+SHA256 59788abf252e2da224542c1c8b727311335c61d990f24f4edf28f6eb5483f676 netqmail-1.05.tar.gz 252264
+MD5 384372f60ba2c1071601d0fea1f221ec qmail-spp-0.42.tar.gz 18689
+RMD160 5511722c52346692488a63bca53106d580a004c7 qmail-spp-0.42.tar.gz 18689
+SHA256 1518e7e82d10fbbb8ecc520f51daf503edeb9c3a9fb935be65a8185e7b53808d qmail-spp-0.42.tar.gz 18689
diff --git a/mail-mta/netqmail/netqmail-1.05-r2.ebuild b/mail-mta/netqmail/netqmail-1.05-r2.ebuild
new file mode 100644
index 000000000000..81813ebe996a
--- /dev/null
+++ b/mail-mta/netqmail/netqmail-1.05-r2.ebuild
@@ -0,0 +1,452 @@
+# Copyright 1999-2006 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/mail-mta/netqmail/netqmail-1.05-r2.ebuild,v 1.1 2006/05/06 18:09:50 hansmi Exp $
+
+inherit eutils toolchain-funcs fixheadtails flag-o-matic
+
+TLS_AUTH_PATCH=20060105
+QMAIL_SPP_PATCH=0.42
+
+DESCRIPTION="qmail -- a secure, reliable, efficient, simple message transfer agent"
+HOMEPAGE="
+	http://cr.yp.to/qmail.html
+	http://www.qmail.org/
+"
+SRC_URI="
+	mirror://qmail/netqmail-${PV}.tar.gz
+	!vanilla? (
+		ssl? ( http://shupp.org/patches/netqmail-${PV}-tls-smtpauth-${TLS_AUTH_PATCH}.patch )
+		highvolume? ( mirror://qmail/big-todo.103.patch )
+		qmail-spp? ( mirror://sourceforge/qmail-spp/qmail-spp-${QMAIL_SPP_PATCH}.tar.gz )
+	)
+"
+
+LICENSE="as-is"
+SLOT="0"
+KEYWORDS="~ppc ~sparc ~x86"
+IUSE="gencertdaily highvolume ssl vanilla qmail-spp"
+RESTRICT="userpriv usersandbox test"
+
+DEPEND="
+	sys-apps/groff
+	net-mail/queue-repair
+	ssl? ( dev-libs/openssl )
+"
+RDEPEND="
+	!virtual/mta
+	sys-apps/ucspi-tcp
+	sys-process/daemontools
+	net-mail/dot-forward
+	${DEPEND}
+"
+PROVIDE="
+	virtual/mta
+	virtual/mda
+"
+
+# Important: QMAIL_CONF_SPLIT should always be a prime number!
+MY_CONF_SPLIT="${QMAIL_CONF_SPLIT:-23}"
+
+MY_S="${S}/netqmail-${PV}"
+QMAIL_SPP_S="${WORKDIR}/qmail-spp-${QMAIL_SPP_PATCH}"
+TCPRULES_DIR=/etc/tcprules.d
+
+if use gencertdaily; then
+	CRON_FOLDER=cron.daily
+else
+	CRON_FOLDER=cron.hourly
+fi
+
+src_unpack() {
+	unpack netqmail-${PV}.tar.gz
+	use qmail-spp && \
+		unpack qmail-spp-${QMAIL_SPP_PATCH}.tar.gz
+
+	cd "${S}"
+
+	./collate.sh || die "patching failed"
+
+	cd "${MY_S}"
+
+	if ! use vanilla; then
+		use ssl && \
+			epatch ${DISTDIR}/netqmail-1.05-tls-smtpauth-20060105.patch
+
+		if use highvolume; then
+			epatch ${DISTDIR}/big-todo.103.patch
+		fi
+
+		if use qmail-spp; then
+			if use ssl; then
+				epatch ${QMAIL_SPP_S}/qmail-spp-smtpauth-tls-20060105.diff
+			else
+				epatch ${QMAIL_SPP_S}/netqmail-spp.diff
+			fi
+		fi
+	fi
+
+	if [[ -n "${QMAIL_PATCH_DIR}" ]]
+	then
+		echo
+		ewarn "You enabled custom patches from ${QMAIL_PATCH_DIR}."
+		ewarn "Be warned that you won't get any support when using "
+		ewarn "this feature. You're on your own from now!"
+		ebeep
+		EPATCH_SOURCE="${QMAIL_PATCH_DIR}" epatch
+		echo
+	fi
+
+	is_prime ${MY_CONF_SPLIT} || die 'QMAIL_CONF_SPLIT is not a prime number.'
+	einfo "Using conf-split value of ${MY_CONF_SPLIT}."
+
+	ht_fix_file Makefile*
+	append-ldflags $(bindnow-flags)
+
+	use ssl && append-flags -DTLS
+
+	echo -n "$(tc-getCC) ${CFLAGS}" > "${MY_S}/conf-cc"
+	echo -n "$(tc-getCC) ${LDFLAGS}" > "${MY_S}/conf-ld"
+	echo -n "${MY_CONF_SPLIT}" > "${MY_S}/conf-split"
+}
+
+src_compile() {
+	cd "${MY_S}"
+	emake it man || die "make failed"
+}
+
+src_install() {
+	cd "${MY_S}"
+
+	einfo "Setting up directory hierarchy ..."
+
+	diropts -m 755 -o root -g qmail
+	dodir /var/qmail/{,bin,boot,control}
+
+	keepdir /var/qmail/users
+
+	diropts -m 755 -o alias -g qmail
+	dodir /var/qmail/alias
+
+	einfo "Installing the qmail software ..."
+
+	insopts -o root -g qmail -m 755
+	insinto /var/qmail/boot
+	doins home home+df proc proc+df binm1 binm1+df binm2 \
+		binm2+df binm3 binm3+df
+
+	insinto /var/qmail/bin
+
+	insopts -o qmailq -g qmail -m 4711
+	doins qmail-queue
+
+	insopts -o root -g qmail -m 700
+	doins qmail-{lspawn,start,newu,newmrh}
+
+	insopts -o root -g qmail -m 711
+	doins qmail-{getpw,local,remote,rspawn,clean,send,pw2u} splogger
+
+	insopts -o root -g qmail -m 755
+	doins bouncesaying condredirect config-fast datemail elq \
+		except forward maildir2mbox maildirmake maildirwatch \
+		mailsubj pinq predate preline qail qbiff \
+		qmail-{inject,pop3d,popup,qmqpc,qmqpd,qmtpd,qread} \
+		qmail-{qstat,showctl,smtpd,tcpok,tcpto} \
+		qreceipt qsmhook sendmail tcp-env
+
+	einfo "Installing manpages"
+	into /usr
+	doman *.[1-8]
+
+	dodoc BLURB* CHANGES FAQ INSTALL* PIC* README* REMOVE* SECURITY \
+		SENDMAIL SYSDEPS TARGETS TEST* THANKS* THOUGHTS TODO* \
+		UPGRADE VERSION*
+
+	# use the correct maildirmake
+	# the courier-imap one has some extensions that are nicer
+	[[ -e /usr/bin/maildirmake ]] && \
+		MAILDIRMAKE="/usr/bin/maildirmake" || \
+		MAILDIRMAKE="${D}/var/qmail/bin/maildirmake"
+
+	einfo "Adding env.d entry for qmail"
+	dodir /etc/env.d
+	insinto /etc/env.d
+	doins ${FILESDIR}/99qmail
+
+	einfo "Creating sendmail replacement ..."
+	diropts -m 755
+	dodir /usr/sbin /usr/lib
+
+	dosym /var/qmail/bin/sendmail /usr/sbin/sendmail
+	dosym /var/qmail/bin/sendmail /usr/lib/sendmail
+
+	einfo "Setting up the default aliases ..."
+	diropts -m 700 -o alias -g qmail
+	${MAILDIRMAKE} ${D}/var/qmail/alias/.maildir
+	keepdir /var/qmail/alias/.maildir/{cur,new,tmp}
+
+	for i in /var/qmail/alias/.qmail-{mailer-daemon,postmaster,root}
+	do
+		if [[ ! -f ${ROOT}${i} ]]; then
+			touch ${D}${i}
+			fowners alias:qmail ${i}
+		fi
+	done
+
+	einfo "Setting up maildirs by default in the account skeleton ..."
+	diropts -m 755 -o root -g root
+	insinto /etc/skel
+	newins ${FILESDIR}/dot-qmail .qmail.sample
+	fperms 644 /etc/skel/.qmail.sample
+	${MAILDIRMAKE} ${D}/etc/skel/.maildir
+	keepdir /etc/skel/.maildir/{cur,new,tmp}
+
+	einfo "Setting up all services (send, smtp, qmtp, qmqp, pop3) ..."
+	insopts -o root -g root -m 755
+	diropts -m 755 -o root -g root
+	dodir /var/qmail/supervise
+
+	for i in send smtpd qmtpd qmqpd pop3d; do
+		insopts -o root -g root -m 755
+		diropts -m 755 -o root -g root
+		dodir /var/qmail/supervise/qmail-${i}{,/log}
+		fperms +t /var/qmail/supervise/qmail-${i}{,/log}
+		insinto /var/qmail/supervise/qmail-${i}
+		newins ${FILESDIR}/run-qmail-${i} run
+		insinto /var/qmail/supervise/qmail-${i}/log
+		newins ${FILESDIR}/run-qmail-${i}-log run
+		diropts -m 755 -o qmaill
+		keepdir /var/log/qmail/qmail-${i}
+	done
+
+	dodir ${TCPRULES_DIR}
+	insinto ${TCPRULES_DIR}
+	for i in smtp qmtp qmqp pop3; do
+		newins ${FILESDIR}/tcp.${i}.sample tcp.qmail-${i}
+	done
+
+	einfo "Installing some stock configuration files"
+	insinto /var/qmail/control
+	insopts -o root -g root -m 644
+	doins ${FILESDIR}/conf-{common,send,qmtpd,qmqpd,pop3d}
+	newins ${FILESDIR}/conf-smtpd conf-smtpd
+	newins ${FILESDIR}/dot-qmail defaultdelivery
+	use ssl && \
+		doins ${FILESDIR}/servercert.cnf
+
+	einfo "Configuration sanity checker and launcher"
+	into /var/qmail
+	insopts -o root -g root -m 644
+	dobin ${FILESDIR}/qmail-config-system
+
+	if use qmail-spp; then
+		einfo "Installing files for qmail-spp"
+		insinto /var/qmail/control/
+		doins ${QMAIL_SPP_S}/samples/smtpplugins
+		keepdir /var/qmail/plugins/
+	fi
+
+	if use ssl; then
+		einfo "SSL Certificate creation script"
+		dobin ${FILESDIR}/mkservercert
+		einfo "RSA key generation cronjob"
+		insinto /etc/${CRON_FOLDER}
+		doins ${FILESDIR}/qmail-genrsacert.sh
+		chmod +x ${D}/etc/${CRON_FOLDER}/qmail-genrsacert.sh
+
+		# for some files
+		keepdir /var/qmail/control/tlshosts/
+	fi
+}
+
+rootmailfixup() {
+	# so you can check mail as root easily
+	local TMPCMD="ln -sf /var/qmail/alias/.maildir/ ${ROOT}/root/.maildir"
+	if [[ -d "${ROOT}/root/.maildir" && ! -L "${ROOT}/root/.maildir" ]] ; then
+		einfo "Previously the qmail ebuilds created /root/.maildir/ but not"
+		einfo "every mail was delivered there. If the directory does not"
+		einfo "contain any mail, please delete it and run:"
+		einfo "${TMPCMD}"
+	else
+		${TMPCMD}
+	fi
+	chown -R alias:qmail ${ROOT}/var/qmail/alias/.maildir 2>/dev/null
+}
+
+buildtcprules() {
+	for i in smtp qmtp qmqp pop3; do
+		# please note that we don't check if it exists
+		# as we want it to make the cdb files anyway!
+		f=tcp.qmail-${i}
+		src=${ROOT}${TCPRULES_DIR}/${f}
+		cdb=${ROOT}${TCPRULES_DIR}/${f}.cdb
+		tmp=${ROOT}${TCPRULES_DIR}/.${f}.tmp
+		[[ -e ${src} ]] && tcprules ${cdb} ${tmp} < ${src}
+	done
+}
+
+pkg_postinst() {
+	einfo "Setting up the message queue hierarchy ..."
+	/usr/bin/queue-repair.py \
+		--create --split "${MY_CONF_SPLIT}" \
+		$(use highvolume && echo '--bigtodo' || echo '--no-bigtodo') \
+		${ROOT}/var/qmail >/dev/null || \
+		die 'queue-repair failed'
+
+	rootmailfixup
+	buildtcprules
+
+	# for good measure
+	env-update
+
+	einfo "To setup qmail to run out-of-the-box on your system, run:"
+	einfo "emerge --config =${CATEGORY}/${PF}"
+	echo
+	einfo "To start qmail at boot you have to add svscan to your startup"
+	einfo "and create the following links:"
+	einfo "ln -s /var/qmail/supervise/qmail-send /service/qmail-send"
+	einfo "ln -s /var/qmail/supervise/qmail-smtpd /service/qmail-smtpd"
+	echo
+	einfo "To start the pop3 server as well, create the following link:"
+	einfo "ln -s /var/qmail/supervise/qmail-pop3d /service/qmail-pop3d"
+	echo
+	einfo "Additionally, the QMTP and QMQP protocols are supported, "
+	einfo "and can be started as:"
+	einfo "ln -s /var/qmail/supervise/qmail-qmtpd /service/qmail-qmtpd"
+	einfo "ln -s /var/qmail/supervise/qmail-qmqpd /service/qmail-qmqpd"
+	echo
+	einfo "Additionally, if you wish to run qmail right now, you should "
+	einfo "run this before anything else:"
+	einfo "source /etc/profile"
+	echo
+	einfo "If you are looking for documentation, check those links:"
+	einfo "http://www.gentoo.org/doc/en/qmail-howto.xml"
+	einfo "  -- qmail/vpopmail Virtual Mail Hosting System Guide"
+	einfo "http://www.lifewithqmail.com/"
+	einfo "  -- Life with qmail"
+}
+
+pkg_preinst() {
+	mkdir -p ${TCPRULES_DIR}
+	for proto in smtp qmtp qmqp pop3; do
+		for ext in '' .cdb; do
+			old="/etc/tcp.${proto}${ext}"
+			new="${TCPRULES_DIR}/tcp.qmail-${proto}${ext}"
+			fail=0
+			if [[ -f "$old" && ! -f "$new" ]]; then
+				einfo "Moving $old to $new"
+				cp $old $new || fail=1
+			else
+				fail=1
+			fi
+			if [[ "${fail}" = 1 && -f ${old} ]]; then
+				eerror "Error moving $old to $new, be sure to check the"
+				eerror "configuration! You may have already moved the files,"
+				eerror "in which case you can delete $old"
+			fi
+		done
+	done
+}
+
+# Candidate for eclass
+pkg_setup() {
+	# keep in sync with mini-qmail pkg
+	einfo "Creating groups and users"
+	enewgroup qmail 201
+	enewuser alias 200 -1 /var/qmail/alias 200
+	enewuser qmaild 201 -1 /var/qmail 200
+	enewuser qmaill 202 -1 /var/qmail 200
+	enewuser qmailp 203 -1 /var/qmail 200
+	enewuser qmailq 204 -1 /var/qmail 201
+	enewuser qmailr 205 -1 /var/qmail 201
+	enewuser qmails 206 -1 /var/qmail 201
+}
+
+pkg_config() {
+	# avoid some weird locale problems
+	export LC_ALL=C
+
+	if [[ ${ROOT} = / ]] ; then
+		if [[ ! -f ${ROOT}var/qmail/control/me ]] ; then
+			export qhost=$(hostname --fqdn)
+			${ROOT}var/qmail/bin/config-fast $qhost
+		fi
+	else
+		ewarn "Skipping some configuration as it MUST be run on the final host"
+	fi
+
+	einfo "Accepting relaying by default from all ips configured on this machine."
+	LOCALIPS=$(/sbin/ifconfig | grep inet | cut -d' ' -f 12 -s | cut -b 6-20)
+	TCPSTRING=":allow,RELAYCLIENT=\"\",RBLSMTPD=\"\""
+	for ip in $LOCALIPS; do
+		myline="${ip}${TCPSTRING}"
+		for proto in smtp qmtp qmqp; do
+			f="${ROOT}${TCPRULES_DIR}/tcp.qmail-${proto}"
+			egrep -q "${myline}" ${f} || echo "${myline}" >>${f}
+		done
+	done
+
+	buildtcprules
+
+	if use ssl; then
+		ebegin "Generating RSA keys for SSL/TLS, this can take some time"
+		${ROOT}/etc/${CRON_FOLDER}/qmail-genrsacert.sh
+		eend $?
+		einfo "Creating a self-signed ssl-certificate:"
+		${ROOT}/var/qmail/bin/mkservercert
+		einfo "If you want to have a properly signed certificate "
+		einfo "instead, do the following:"
+		# space at the end of the string because of the current implementation
+		# of einfo
+		einfo "openssl req -new -nodes -out req.pem \\ "
+		einfo "  -config /var/qmail/control/servercert.cnf \\ "
+		einfo "  -keyout /var/qmail/control/servercert.pem"
+		einfo "Send req.pem to your CA to obtain signed_req.pem, and do:"
+		einfo "cat signed_req.pem >> /var/qmail/control/servercert.pem"
+	fi
+}
+
+# --- TODO: The following code can be moved to prime.eclass --
+# Original Author: Michael Hanselmann <hansmi@gentoo.org>
+# Purpose: Functions for prime numbers
+
+# Prints a list of primes between min and max inclusive
+#
+# Note: this functions gets very slow when used with large numbers.
+#
+# Syntax: primes <min> <max>
+primes() {
+	local min=${1} max=${2}
+	local result= primelist=2 i p
+
+	[[ ${min} -le 2 ]] && result="${result} 2"
+
+	for ((i = 3; i <= max; i += 2))
+	do
+		for p in ${primelist}
+		do
+			[[ $[i % p] == 0 || $[p * p] -gt ${i} ]] && \
+				break
+		done
+		if [[ $[i % p] != 0 ]]
+		then
+			primelist="${primelist} ${i}"
+			[[ ${i} -ge ${min} ]] && \
+				result="${result} ${i}"
+		fi
+	done
+
+	echo ${result}
+}
+
+# Checks wether a number is a prime number
+#
+# Syntax: is_prime <number>
+is_prime() {
+	local number=${1} i
+	for i in $(primes ${number} ${number})
+	do
+		[[ ${i} == ${number} ]] && return 0
+	done
+	return 1
+}
+# --- end of prime.eclass ---