New upstream version; Upgrade bootstrap compiler for x86 and amd64 to 0.9.14.

(Portage version: 2.1.1_pre2-r2)

11 files changed, 450 insertions, 1 deletions

diff --git a/dev-lisp/sbcl/ChangeLog b/dev-lisp/sbcl/ChangeLog
index bac5ca3295fe..648b3e165410 100644
--- a/dev-lisp/sbcl/ChangeLog
+++ b/dev-lisp/sbcl/ChangeLog
@@ -1,6 +1,18 @@
 # ChangeLog for dev-lisp/sbcl
 # Copyright 2002-2006 Gentoo Foundation; Distributed under the GPL v2
-# $Header: /var/cvsroot/gentoo-x86/dev-lisp/sbcl/ChangeLog,v 1.90 2006/05/31 02:41:01 mkennedy Exp $
+# $Header: /var/cvsroot/gentoo-x86/dev-lisp/sbcl/ChangeLog,v 1.91 2006/07/09 18:06:20 mkennedy Exp $
+
+*sbcl-0.9.14 (09 Jul 2006)
+
+  09 Jul 2006; Matthew Kennedy <mkennedy@gentoo.org>
+  +files/0.9.14/README.Gentoo,
+  +files/0.9.14/customize-target-features.lisp-prefix,
+  +files/0.9.14/customize-target-features.lisp-suffix,
+  +files/0.9.14/disable-tests-gentoo.patch, +files/0.9.14/install-clc.lisp,
+  +files/0.9.14/sbcl.sh, +files/0.9.14/sbclrc,
+  +files/0.9.14/vanilla-module-install-source-gentoo.patch,
+  +sbcl-0.9.14.ebuild:
+  New upstream version; Upgrade bootstrap compiler for x86 and amd64 to 0.9.14.
 
 *sbcl-0.9.13 (31 May 2006)
 
diff --git a/dev-lisp/sbcl/files/0.9.14/README.Gentoo b/dev-lisp/sbcl/files/0.9.14/README.Gentoo
new file mode 100644
index 000000000000..7c5e97e2127d
--- /dev/null
+++ b/dev-lisp/sbcl/files/0.9.14/README.Gentoo
@@ -0,0 +1,30 @@
+$Id: README.Gentoo,v 1.1 2006/07/09 18:06:20 mkennedy Exp $
+
+Gentoo GNU/Linux specific notes for SBCL
+----------------------------------------
+
+This is the README.Gentoo file from /usr/share/doc/@PF@/ directory.
+
+  * The Gentoo port uses patches from the Debian project's SBCL port.
+
+  * An SBCL with support for multi-threading on GNU/Linux for the x86 and amd64
+    platforms is available with 'USE="threads" emerge dev-lisp/sbcl'.  Note, an
+    NPTL-enabled GLIBC is a requirement beginning with SBCL 0.9.5.
+
+  * asdf-install is installed as sbcl-asdf-install (the man-page is similarly
+    named).
+
+  * Support for the Common Lisp Controller is available.
+
+  * If "nosource" is in your USE flags, then SBCL's source will not be installed
+    (in /usr/lib/sbcl/src).
+
+  * If "unicode" is in your USE flags, then support for SBCL
+    Unicode will be included.
+
+  * If "ldb" is in your USE flags, then support for the SBCL low-level debugger
+    will be included.
+
+If you encounter any problems or have suggestions, use http://bugs.gentoo.org.
+Please don't bother the upstream authors unless you are absolutely certain it is
+not Gentoo-related.
diff --git a/dev-lisp/sbcl/files/0.9.14/customize-target-features.lisp-prefix b/dev-lisp/sbcl/files/0.9.14/customize-target-features.lisp-prefix
new file mode 100644
index 000000000000..40f9a4fc85fa
--- /dev/null
+++ b/dev-lisp/sbcl/files/0.9.14/customize-target-features.lisp-prefix
@@ -0,0 +1,5 @@
+(lambda (list)
+(flet ((enable (x)
+(pushnew x list))
+(disable (x)
+(setf list (remove x list))))
diff --git a/dev-lisp/sbcl/files/0.9.14/customize-target-features.lisp-suffix b/dev-lisp/sbcl/files/0.9.14/customize-target-features.lisp-suffix
new file mode 100644
index 000000000000..dbbde7adc44e
--- /dev/null
+++ b/dev-lisp/sbcl/files/0.9.14/customize-target-features.lisp-suffix
@@ -0,0 +1,2 @@
+)
+list)
diff --git a/dev-lisp/sbcl/files/0.9.14/disable-tests-gentoo.patch b/dev-lisp/sbcl/files/0.9.14/disable-tests-gentoo.patch
new file mode 100644
index 000000000000..271795e428ca
--- /dev/null
+++ b/dev-lisp/sbcl/files/0.9.14/disable-tests-gentoo.patch
@@ -0,0 +1,56 @@
+diff -ur sbcl-0.9.14.orig/contrib/sb-bsd-sockets/sb-bsd-sockets.asd sbcl-0.9.14/contrib/sb-bsd-sockets/sb-bsd-sockets.asd
+--- sbcl-0.9.14.orig/contrib/sb-bsd-sockets/sb-bsd-sockets.asd	2006-06-09 09:11:29.000000000 -0500
++++ sbcl-0.9.14/contrib/sb-bsd-sockets/sb-bsd-sockets.asd	2006-07-09 11:42:19.000000000 -0500
+@@ -42,19 +42,3 @@
+ 
+ (defmethod perform :after ((o load-op) (c (eql (find-system :sb-bsd-sockets))))
+   (provide 'sb-bsd-sockets))
+-
+-#-win32
+-(defmethod perform ((o test-op) (c (eql (find-system :sb-bsd-sockets))))
+-  (operate 'load-op 'sb-bsd-sockets-tests)
+-  (operate 'test-op 'sb-bsd-sockets-tests))
+-
+-#-win32
+-(defsystem sb-bsd-sockets-tests
+-  :depends-on (sb-rt sb-bsd-sockets #-win32 sb-posix)
+-  :components ((:file "tests")))
+-
+-#-win32
+-(defmethod perform ((o test-op) (c (eql (find-system :sb-bsd-sockets-tests))))
+-  (or (funcall (intern "DO-TESTS" (find-package "SB-RT")))
+-      (error "test-op failed")))
+-
+Only in sbcl-0.9.14/contrib/sb-bsd-sockets: sb-bsd-sockets.asd.~1.25.~
+diff -ur sbcl-0.9.14.orig/contrib/sb-posix/sb-posix.asd sbcl-0.9.14/contrib/sb-posix/sb-posix.asd
+--- sbcl-0.9.14.orig/contrib/sb-posix/sb-posix.asd	2006-03-07 06:04:27.000000000 -0600
++++ sbcl-0.9.14/contrib/sb-posix/sb-posix.asd	2006-07-09 11:43:16.000000000 -0500
+@@ -22,27 +22,3 @@
+ 
+ (defmethod perform :after ((o load-op) (c (eql (find-system :sb-posix))))
+   (provide 'sb-posix))
+-
+-(defmethod perform ((o test-op) (c (eql (find-system :sb-posix))))
+-  (operate 'load-op 'sb-posix-tests)
+-  (operate 'test-op 'sb-posix-tests))
+-
+-(defmethod perform ((o test-op) (c (eql (find-system :sb-posix-tests))))
+-  (funcall (intern "DO-TESTS" (find-package "SB-RT")))
+-  (let ((failures (funcall (intern "PENDING-TESTS" "SB-RT")))
+-	(ignored-failures (loop for sym being the symbols of :sb-posix-tests
+-			        if (search ".ERROR" (symbol-name sym))
+-			        collect sym)))
+-    (cond
+-      ((null failures)
+-       t)	     
+-      ((null (set-difference failures ignored-failures))
+-       (warn "~@<some POSIX implementations return incorrect error values for ~
+-              failing calls, but there is legitimate variation between ~
+-              implementations too.  If you think the errno ~
+-              from your platform is valid, please contact the sbcl ~
+-              developers; otherwise, please submit a bug report to your ~
+-              kernel distributor~@:>")
+-       t)
+-      (t
+-       (error "non-errno tests failed!")))))
+Only in sbcl-0.9.14/contrib/sb-posix: sb-posix.asd.~1.13.~
diff --git a/dev-lisp/sbcl/files/0.9.14/install-clc.lisp b/dev-lisp/sbcl/files/0.9.14/install-clc.lisp
new file mode 100644
index 000000000000..8ae9a3828dff
--- /dev/null
+++ b/dev-lisp/sbcl/files/0.9.14/install-clc.lisp
@@ -0,0 +1,37 @@
+;;; -*- Mode: LISP; Package: CL-USER -*-
+;;;
+;;; Copyright (C) Peter Van Eynde 2001 and Kevin Rosenberg 2002-2003
+;;;
+;;; License: LGPL v2
+;;;
+
+;; This file is originally from the Debian project patch to SBCL
+;; upstream.
+
+(in-package "COMMON-LISP-USER")
+
+(handler-case
+    (load "/usr/share/common-lisp/source/common-lisp-controller/common-lisp-controller.lisp")
+  (error (e)
+    (format t "~%Error during load of common-lisp-controller.lisp: ~A~%" e)
+    (sb-unix:unix-exit 1)))
+
+(handler-case
+    (common-lisp-controller:init-common-lisp-controller-v4 "sbcl")
+  (error (e)
+    (format t "~%Error running init-common-lisp-controller-v4: ~A~%" e)
+    (sb-unix:unix-exit 1)))
+
+(when (probe-file #p"/etc/lisp.config")
+  (load #p"/etc/lisp.config"))
+
+(setf (logical-pathname-translations "SYS")
+      '(("SYS:SRC;**;*.*.*"
+	 #P"/usr/share/sbcl/src/**/*.*")
+	("SYS:CONTRIB;**;*.*.*"
+	 #P"/usr/share/sbcl/**/*.*")))
+       
+(ignore-errors
+ (format t "~%Saving to sbcl-new.core...")
+ (sb-ext:gc :full t)
+ (sb-ext:save-lisp-and-die "sbcl-new.core"))
diff --git a/dev-lisp/sbcl/files/0.9.14/sbcl.sh b/dev-lisp/sbcl/files/0.9.14/sbcl.sh
new file mode 100644
index 000000000000..6693bd9b4e8b
--- /dev/null
+++ b/dev-lisp/sbcl/files/0.9.14/sbcl.sh
@@ -0,0 +1,65 @@
+#!/bin/sh
+
+# This file is originally from the Debian project patch to SBCL
+# upstream.  It has been modified by the Gentoo project to NOT use
+# /etc/sbcl.rc which has been confusing because SBCL docs refer
+# /etc/sbclrc.
+
+if [ ! -f /usr/share/common-lisp/source/common-lisp-controller/common-lisp-controller.lisp ] ; then
+  cat <<EOF
+$0: cannot find the common-lisp-controller source.
+EOF
+  exit 0
+fi
+
+build_error()
+{
+    echo "Build failure $1"
+    exit 1
+}
+
+case $1 in
+    install-clc)
+	    echo $0 loading and dumping clc.
+	    ( cd /usr/lib/sbcl
+	      /usr/bin/sbcl --core /usr/lib/sbcl/sbcl-dist.core \
+		   --noinform --sysinit /etc/sbclrc --userinit /dev/null \
+		   --load "/usr/lib/sbcl/install-clc.lisp" # 2> /dev/null
+              mv sbcl-new.core sbcl.core || (echo FAILED ; cp sbcl-dist.core sbcl.core ) )
+	    ;;
+    remove-clc)
+	    echo $0 removing clc-enabled image
+	    cp /usr/lib/sbcl/sbcl-dist.core /usr/lib/sbcl/sbcl.core
+	    ;;
+    rebuild)
+	    echo $0 rebuilding...
+	    shift
+	    echo rebuilding $1
+	    /usr/bin/sbcl --noinform --sysinit /etc/sbclrc --userinit /dev/null \
+	         --disable-debugger \
+	         --eval \
+"(handler-case
+     (progn
+       (asdf:operate 'asdf:compile-op (quote $1))
+       (sb-unix:unix-exit 0))
+    (error (e)
+      (ignore-errors (format t \"~&Build error: ~A~%\" e))
+      (finish-output)
+      (sb-unix:unix-exit 1)))" || build_error
+	    ;;
+     remove)
+	    echo $0 removing packages...
+	    shift
+	    while [ ! -z "$1" ] ; do
+		rm -rf "/var/cache/common-lisp-controller/*/sbcl/${1}"
+		shift
+ 	    done
+	    ;;
+    *)
+	    echo $0 unkown command $1
+	    echo known commands: rebuild, remove, install-clc, and remove-clc
+	    exit 1
+	    ;;
+esac
+
+exit 0
\ No newline at end of file
diff --git a/dev-lisp/sbcl/files/0.9.14/sbclrc b/dev-lisp/sbcl/files/0.9.14/sbclrc
new file mode 100644
index 000000000000..bd0ab76b6adf
--- /dev/null
+++ b/dev-lisp/sbcl/files/0.9.14/sbclrc
@@ -0,0 +1,16 @@
+;;; -*- Mode: Lisp; Syntax: ANSI-Common-Lisp; Package: CL-USER -*-
+
+;;; This file is installed as /etc/sbclrc and run on every invocation
+;;; of SBCL
+
+(if (probe-file "/etc/lisp-config.lisp")
+    (load "/etc/lisp-config.lisp")
+    (format t "~%;;; Warning: there is no /etc/lisp-config.lisp file"))
+
+;;; The following is required if you want source location functions to
+;;; work (such as those called when you use M-. (edit definition) in
+;;; ILISP or SLIME)
+
+(setf (logical-pathname-translations "SYS")
+      '(("SYS:SRC;**;*.*.*" #p"/usr/lib/sbcl/src/**/*.*")
+	("SYS:CONTRIB;**;*.*.*" #p"/usr/lib/sbcl/**/*.*")))
diff --git a/dev-lisp/sbcl/files/0.9.14/vanilla-module-install-source-gentoo.patch b/dev-lisp/sbcl/files/0.9.14/vanilla-module-install-source-gentoo.patch
new file mode 100644
index 000000000000..ea10052553a5
--- /dev/null
+++ b/dev-lisp/sbcl/files/0.9.14/vanilla-module-install-source-gentoo.patch
@@ -0,0 +1,10 @@
+diff -ur sbcl-0.9.14.orig/contrib/vanilla-module.mk sbcl-0.9.14/contrib/vanilla-module.mk
+--- sbcl-0.9.14.orig/contrib/vanilla-module.mk	2003-11-08 09:04:47.000000000 -0600
++++ sbcl-0.9.14/contrib/vanilla-module.mk	2006-05-29 22:49:12.000000000 -0500
+@@ -5,4 +5,4 @@
+ test:: $(MODULE).fasl
+ 
+ install:
+-	cp $(MODULE).fasl $(BUILD_ROOT)$(INSTALL_DIR)
++	cp $(MODULE).fasl $(MODULE).lisp $(BUILD_ROOT)$(INSTALL_DIR)
+Only in sbcl-0.9.14/contrib: vanilla-module.mk.~1.5.~
diff --git a/dev-lisp/sbcl/files/digest-sbcl-0.9.14 b/dev-lisp/sbcl/files/digest-sbcl-0.9.14
new file mode 100644
index 000000000000..4d0e6c07c89c
--- /dev/null
+++ b/dev-lisp/sbcl/files/digest-sbcl-0.9.14
@@ -0,0 +1,21 @@
+MD5 29ad145f1fc45c65b8d65b39013bc43f sbcl-0.7.10-mips-linux-binary.tar.gz 7473873
+RMD160 d9c34e109dd307bfe652ef57d5837c83cbc60055 sbcl-0.7.10-mips-linux-binary.tar.gz 7473873
+SHA256 90bff80973c3e295b5ecdd0b59525583ae04cb2d5967378af65e04ac77fad660 sbcl-0.7.10-mips-linux-binary.tar.gz 7473873
+MD5 3a72d0785ce0a8e02f9af632c2a4f217 sbcl-0.8.15-powerpc-linux-binary.tar.bz2 6656148
+RMD160 0e73b6e96f0170d44be60dfde8bf580596d3a6ee sbcl-0.8.15-powerpc-linux-binary.tar.bz2 6656148
+SHA256 fef30a771530096c4f190c60d9d7c396844fc67a3ec2bbaae9b0ff497f925129 sbcl-0.8.15-powerpc-linux-binary.tar.bz2 6656148
+MD5 029b85186984d0bfc8b49c4de1e8e45e sbcl-0.8.15-sparc-linux-binary.tar.bz2 6903090
+RMD160 41015dcfb41caf93b54a02a0f55eec994309accf sbcl-0.8.15-sparc-linux-binary.tar.bz2 6903090
+SHA256 f0bc5fc11e9c0f1651ebe773b5c7e972da589cc4af2811d25438a099f490cc7d sbcl-0.8.15-sparc-linux-binary.tar.bz2 6903090
+MD5 46d67859cac0d3b748310a93311b308a sbcl-0.9.11a-powerpc-darwin-binary.tar.bz2 6766401
+RMD160 c60dba2a0278acf787d53a93ebac4de03c1d5ed8 sbcl-0.9.11a-powerpc-darwin-binary.tar.bz2 6766401
+SHA256 5cb563b19d1dd828e55bde9763404f5b908c9f5a043ba8c443415291b969b3d9 sbcl-0.9.11a-powerpc-darwin-binary.tar.bz2 6766401
+MD5 d37a369e387286a0ceca51dbd8d1b173 sbcl-0.9.14-source.tar.bz2 2757417
+RMD160 d44a5c5dee8b2b3bfba61b216ddca80386357389 sbcl-0.9.14-source.tar.bz2 2757417
+SHA256 4d2b4b7332aaa55be10ba51443c96b017c758a553ff691f2109d08892fe1cd3d sbcl-0.9.14-source.tar.bz2 2757417
+MD5 033b04259a929e71393281981fdf1f7a sbcl-0.9.14-x86-64-linux-binary.tar.bz2 7225013
+RMD160 7a544bedebd4389eb75fe67bb48c0d25f677bc0d sbcl-0.9.14-x86-64-linux-binary.tar.bz2 7225013
+SHA256 3db39ce36b1efc42cf99fc1be355aa8c0107e60ffb56f50bb001cc9b5cab70eb sbcl-0.9.14-x86-64-linux-binary.tar.bz2 7225013
+MD5 5a703f5dd196ed246fd84f4f58314995 sbcl-0.9.14-x86-linux-binary.tar.bz2 7517927
+RMD160 039968db40389a481da29dcc310aa05a50ee6ac6 sbcl-0.9.14-x86-linux-binary.tar.bz2 7517927
+SHA256 f1add7f9c76e1ea45f17b752a62f5ad5d1fb4d27d06ae5ebfed05629bba9fafa sbcl-0.9.14-x86-linux-binary.tar.bz2 7517927
diff --git a/dev-lisp/sbcl/sbcl-0.9.14.ebuild b/dev-lisp/sbcl/sbcl-0.9.14.ebuild
new file mode 100644
index 000000000000..3f6611c2d315
--- /dev/null
+++ b/dev-lisp/sbcl/sbcl-0.9.14.ebuild
@@ -0,0 +1,195 @@
+# Copyright 1999-2006 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/dev-lisp/sbcl/sbcl-0.9.14.ebuild,v 1.1 2006/07/09 18:06:20 mkennedy Exp $
+
+inherit common-lisp-common-2 eutils flag-o-matic
+
+BV_X86=0.9.14
+BV_PPC=0.8.15
+BV_SPARC=0.8.15
+BV_MIPS=0.7.10
+BV_AMD64=0.9.14
+BV_PPC_MACOS=0.9.11a
+
+DESCRIPTION="Steel Bank Common Lisp (SBCL) is an implementation of ANSI Common Lisp."
+HOMEPAGE="http://sbcl.sourceforge.net/"
+SRC_URI="mirror://sourceforge/sbcl/${P}-source.tar.bz2
+	x86? ( mirror://sourceforge/sbcl/${PN}-${BV_X86}-x86-linux-binary.tar.bz2 )
+	ppc? ( mirror://sourceforge/sbcl/${PN}-${BV_PPC}-powerpc-linux-binary.tar.bz2 )
+	sparc? ( mirror://sourceforge/sbcl/${PN}-${BV_SPARC}-sparc-linux-binary.tar.bz2 )
+	mips? ( mirror://sourceforge/sbcl/${PN}-${BV_MIPS}-mips-linux-binary.tar.gz )
+	amd64? ( mirror://sourceforge/sbcl/${PN}-${BV_AMD64}-x86-64-linux-binary.tar.bz2 )
+	ppc-macos? ( mirror://sourceforge/sbcl/${PN}-${BV_PPC_MACOS}-powerpc-darwin-binary.tar.bz2 )"
+
+LICENSE="MIT"
+SLOT="0"
+
+KEYWORDS="~amd64 ~mips ~ppc ~ppc-macos ~sparc ~x86"
+
+IUSE="ldb nosource threads unicode doc"
+
+DEPEND=">=dev-lisp/common-lisp-controller-5.13
+	>=dev-lisp/cl-asdf-1.84
+	!doc? ( sys-apps/texinfo )"
+
+PROVIDE="virtual/commonlisp"
+
+MY_WORK=${WORKDIR}/files
+
+sbcl_einfo() {
+	local method
+	case $# in
+		0) method=einfo;;
+		1) method=$1;;
+		*) die "Invalid number of arguments to scbl_einfo"
+	esac
+	$method ""; while read line; do $method "${line}"; done; $method ""
+}
+
+pkg_setup() {
+	if built_with_use sys-devel/gcc hardened && gcc-config -c |grep -qv vanilla; then
+		sbcl_einfo eerror <<'EOF'
+So-called "hardened" compiler features are incompatible with SBCL. You
+must use gcc-config to select a profile with non-hardened features
+(the "vanilla" profile) and "source /etc/profile" before continuing.
+EOF
+		die
+	fi
+	if ! built_with_use sys-libs/glibc nptl && (use x86 || use amd64); then
+		sbcl_einfo eerror <<'EOF'
+Building SBCL without NPTL support on at least x86 and amd64
+architectures is not a supported configuration in Gentoo.  Please
+refer to Bug #119016 for more information.
+EOF
+		die
+	fi
+	if (use ppc-macos || use ppc) && use ldb; then
+		sbcl_einfo ewarn <<'EOF'
+Building SBCL on PPC with LDB support is not a supported configuration
+in Gentoo.	Please refer to Bug #121830 for more information.
+Continuing with LDB support disabled.
+EOF
+	fi
+}
+
+src_unpack() {
+	local a
+
+	mkdir -p ${MY_WORK}
+	cp ${FILESDIR}/${PV}/* ${MY_WORK}
+	sed -i "s,/usr/lib,/usr/$(get_libdir),g" ${MY_WORK}/*
+
+	# `use ppc` returns true for both ppc linux and ppc-macos systems
+	# specify
+	if use ppc-macos ; then
+		a="${PN}-${BV_PPC_MACOS}-powerpc-darwin-binary.tar.bz2"
+	elif use ppc; then
+		a="${PN}-${BV_PPC}-powerpc-linux-binary.tar.bz2"
+	else
+		for a in ${A}; do [[ $a == *binary* ]] && break; done
+	fi
+
+	unpack $a
+	mv ${PN}* sbcl-binary || die
+
+	unpack ${P}-source.tar.bz2
+	epatch ${MY_WORK}/disable-tests-gentoo.patch || die
+	epatch ${MY_WORK}/vanilla-module-install-source-gentoo.patch || die
+	sed -i "s,/lib,/$(get_libdir),g" ${S}/install.sh
+	sed -i "s,/usr/local/lib,/usr/$(get_libdir),g" \
+		${S}/src/runtime/runtime.c # #define SBCL_HOME ...
+
+	cp ${MY_WORK}/customize-target-features.lisp-prefix \
+		${S}/customize-target-features.lisp
+	if use x86 || use amd64; then
+		use threads && echo '(enable :sb-thread)' \
+			>>${S}/customize-target-features.lisp
+	fi
+	if (use ppc-macos || use ppc) && use ldb; then
+		sbcl_einfo ewarn <<'EOF'
+Excluding LDB support for ppc-macos or ppc.
+EOF
+	else
+		use ldb \
+			&& echo '(enable :sb-ldb)' \
+			>>${S}/customize-target-features.lisp
+	fi
+	echo '(disable :sb-test)' >>${S}/customize-target-features.lisp
+	! use unicode \
+		&& echo '(disable :sb-unicode)' \
+		>>${S}/customize-target-features.lisp
+	cat ${MY_WORK}/customize-target-features.lisp-suffix \
+		>>${S}/customize-target-features.lisp
+
+	find ${S} -type f -name .cvsignore -print0 | xargs -0 rm -f
+	find ${S} -depth -type d -name CVS -print0 | xargs -0 rm -rf
+	find ${S} -type f -name \*.c -print0 | xargs -0 chmod 644
+}
+
+src_compile() {
+	local bindir="${WORKDIR}/sbcl-binary"
+
+	filter-ldflags -Wl,--as-needed --as-needed # see Bug #132992
+
+	LANG=C PATH=${bindir}/src/runtime:${PATH} SBCL_HOME=${bindir}/output GNUMAKE=make \
+		./make.sh 'sbcl
+			--sysinit /dev/null
+			--userinit /dev/null
+			--disable-debugger
+			--core ${bindir}/output/sbcl.core' \
+				|| die
+	if use doc; then
+			cd ${S}/doc/manual
+			LANG=C make info html || die
+	fi
+}
+
+src_install() {
+	unset SBCL_HOME
+
+	insinto /etc/
+	doins ${MY_WORK}/sbclrc || die	# Gentoo specific (from Debian)
+	dosed "s,/usr/lib/,/usr/$(get_libdir)/,g" /etc/sbclrc
+
+	exeinto /usr/$(get_libdir)/common-lisp/bin
+	doexe ${MY_WORK}/sbcl.sh || die	# Gentoo specific (from Debian)
+
+	dodir /usr/share/man
+	dodir /usr/share/doc/${PF}
+	INSTALL_ROOT=${D}/usr DOC_DIR=${D}/usr/share/doc/${PF} sh install.sh || die
+	mv ${D}/usr/$(get_libdir)/sbcl/sbcl.core ${D}/usr/$(get_libdir)/sbcl/sbcl-dist.core || die
+
+	insinto /usr/$(get_libdir)/sbcl
+	doins ${MY_WORK}/install-clc.lisp	# Gentoo specific (from Debian)
+
+	doman doc/sbcl-asdf-install.1
+
+	dodoc BUGS COPYING CREDITS INSTALL NEWS OPTIMIZATIONS PRINCIPLES README STYLE SUPPORT TLA TODO
+	dodoc ${MY_WORK}/README.Gentoo
+
+	if use doc; then
+		dohtml doc/html/*
+		doinfo ${S}/doc/manual/*.info*
+	fi
+
+	keepdir /usr/$(get_libdir)/common-lisp/sbcl
+
+	if ! use nosource; then
+		# install the SBCL source
+		cp -pPR ${S}/src ${D}/usr/$(get_libdir)/sbcl
+		find ${D}/usr/$(get_libdir)/sbcl/src -type f -name \*.fasl -print0 | xargs -0 rm -f
+	fi
+
+	impl-save-timestamp-hack sbcl || die
+}
+
+pkg_postinst() {
+	LANG=C standard-impl-postinst sbcl
+}
+
+pkg_postrm() {
+	LANG=C standard-impl-postrm sbcl /usr/bin/sbcl
+	if [ ! -x /usr/bin/sbcl ]; then
+		rm -rf /usr/$(get_libdir)/sbcl/ || die
+	fi
+}