cleaning house

14 files changed, 12 insertions, 1562 deletions

diff --git a/dev-lang/perl/ChangeLog b/dev-lang/perl/ChangeLog
index 743107809370..c99dc8125b3e 100644
--- a/dev-lang/perl/ChangeLog
+++ b/dev-lang/perl/ChangeLog
@@ -1,6 +1,17 @@
 # ChangeLog for dev-lang/perl
 # Copyright 2002-2004 Gentoo Technologies, Inc.; Distributed under the GPL v2
-# $Header: /var/cvsroot/gentoo-x86/dev-lang/perl/ChangeLog,v 1.54 2004/02/19 22:31:58 agriffis Exp $
+# $Header: /var/cvsroot/gentoo-x86/dev-lang/perl/ChangeLog,v 1.55 2004/02/21 11:15:21 mcummings Exp $
+
+  21 Feb 2004; Michael Cummings <mcummings@gentoo.org> perl-5.8.0-r11.ebuild,
+  perl-5.8.0-r12.ebuild, perl-5.8.0-r9.ebuild, perl-5.8.2.ebuild,
+  files/libperl-5.8.0-create-libperl-soname.patch,
+  files/perl-5.8.0-perldoc-emptydirs.patch,
+  files/perl-5.8.0-prelink-lpthread.patch, files/perl-5.8.0-reorder-INC.patch,
+  files/perl-5.8.0-sockatmark-should-__THROW.patch:
+  Massive clean up. With 5.8.2 now marked stable on all platforms, we are
+    removing the older 5.8.0 ebuilds, which are no longer available upstream
+    anymore. I also cleaned out the files dir of any patches that were being
+    specifically used by 5.8.0 and not the other versions.
 
   19 Feb 2004; Aron Griffis <agriffis@gentoo.org> perl-5.8.2-r1.ebuild:
   stable on alpha and ia64
diff --git a/dev-lang/perl/files/digest-perl-5.8.0-r11 b/dev-lang/perl/files/digest-perl-5.8.0-r11
deleted file mode 100644
index 8303b880706d..000000000000
--- a/dev-lang/perl/files/digest-perl-5.8.0-r11
+++ /dev/null
@@ -1,3 +0,0 @@
-MD5 d9bdb180620306023fd35901a2878b62 perl-5.8.0.tar.gz 11023084
-MD5 306033319ec016cbec2ff4f3238f3566 DB_File-1.806.tar.gz 80078
-MD5 1dbc4728cea6c662d03ea4a0863859a5 Safe-2.09.tar.gz 11465
diff --git a/dev-lang/perl/files/digest-perl-5.8.0-r12 b/dev-lang/perl/files/digest-perl-5.8.0-r12
deleted file mode 100644
index 8303b880706d..000000000000
--- a/dev-lang/perl/files/digest-perl-5.8.0-r12
+++ /dev/null
@@ -1,3 +0,0 @@
-MD5 d9bdb180620306023fd35901a2878b62 perl-5.8.0.tar.gz 11023084
-MD5 306033319ec016cbec2ff4f3238f3566 DB_File-1.806.tar.gz 80078
-MD5 1dbc4728cea6c662d03ea4a0863859a5 Safe-2.09.tar.gz 11465
diff --git a/dev-lang/perl/files/digest-perl-5.8.0-r9 b/dev-lang/perl/files/digest-perl-5.8.0-r9
deleted file mode 100644
index 5113edcf456b..000000000000
--- a/dev-lang/perl/files/digest-perl-5.8.0-r9
+++ /dev/null
@@ -1,11 +0,0 @@
-MD5 ea9bf02b28e73e19dc85eb07f2347460 /files/5.6.1-builtin-fixup.diff 777
-MD5 28fe3868fd4e47ca609f7af6156c94ea /files/5.6.1-op-test-fix.diff 503
-MD5 d2af75f06a64c5934db314ff38939cdd /files/libperl-5.8.0-create-libperl-soname.patch 424
-MD5 b8480b2ccbf7d5a7fe543b9e6f8dbc14 /files/libperl_rebuilder 10260
-MD5 060e9f10466fdc1268c75a7cf4dcbc7c /files/perl-5.8.0-RC2-special-h2ph-not-failing-on-machine_ansi_header.patch 446
-MD5 4e49da394d326bcb744c7990bd27d6ac /files/perl-5.8.0-perldoc-emptydirs.patch 461
-MD5 4e99f7529e149661372283c981cf17ff /files/perl-5.8.0-prelink-lpthread.patch 476
-MD5 393b3dff879c892d461901183d3b0055 /files/perl-5.8.0-sockatmark-should-__THROW.patch 402
-MD5 5aa1a011eddb5b13299b63948230db33 /files/stat.t 8884
-MD5 9d35bc77720f2e300adffba40e07b2b6 /perl-5.8.0-r9.ebuild 13382
-MD5 d9bdb180620306023fd35901a2878b62 perl-5.8.0.tar.gz 11023084
diff --git a/dev-lang/perl/files/digest-perl-5.8.2 b/dev-lang/perl/files/digest-perl-5.8.2
deleted file mode 100644
index 03c9dcc55731..000000000000
--- a/dev-lang/perl/files/digest-perl-5.8.2
+++ /dev/null
@@ -1 +0,0 @@
-MD5 fa356b74f99166b63a68a322c3c68f91 perl-5.8.2.tar.gz 11896287
diff --git a/dev-lang/perl/files/libperl-5.8.0-create-libperl-soname.patch b/dev-lang/perl/files/libperl-5.8.0-create-libperl-soname.patch
deleted file mode 100644
index f68fb8cc9ce8..000000000000
--- a/dev-lang/perl/files/libperl-5.8.0-create-libperl-soname.patch
+++ /dev/null
@@ -1,12 +0,0 @@
---- perl-5.8.0/Makefile.SH.orig	2002-12-28 07:46:27.000000000 +0200
-+++ perl-5.8.0/Makefile.SH	2002-06-09 19:04:06.000000000 +0200
-@@ -480,7 +480,7 @@
- 	case "$useshrplib" in
- 	true)
- 		$spitshell >>Makefile <<'!NO!SUBS!'
--	$(LD) -o $@ $(SHRPLDFLAGS) perl$(OBJ_EXT) $(obj)
-+	$(LD) -o $@ $(SHRPLDFLAGS) perl$(OBJ_EXT) $(obj) -Wl,-soname -Wl,libperl.so.`echo $(LIBPERL) | cut -d. -f3`
- !NO!SUBS!
- 		case "$osname" in
- 		aix)
-
diff --git a/dev-lang/perl/files/perl-5.8.0-perldoc-emptydirs.patch b/dev-lang/perl/files/perl-5.8.0-perldoc-emptydirs.patch
deleted file mode 100644
index 93d8e00ca5b0..000000000000
--- a/dev-lang/perl/files/perl-5.8.0-perldoc-emptydirs.patch
+++ /dev/null
@@ -1,10 +0,0 @@
---- utils/perldoc.PL.orig	2003-02-28 15:57:31.000000000 -0800
-+++ utils/perldoc.PL	2003-02-28 15:57:58.000000000 -0800
-@@ -340,6 +340,7 @@
-     $global_target = (splitdir $s)[-1];   # XXX: why not use File::Basename?
-     for ($i=0; $i<@dirs; $i++) {
- 	$dir = $dirs[$i];
-+  next unless -d $dir;
- 	($dir = VMS::Filespec::unixpath($dir)) =~ s!/\z!! if $Is_VMS;
- 	if (       (! $opt_m && ( $ret = check_file $dir,"$s.pod"))
- 		or ( $ret = check_file $dir,"$s.pm")
diff --git a/dev-lang/perl/files/perl-5.8.0-prelink-lpthread.patch b/dev-lang/perl/files/perl-5.8.0-prelink-lpthread.patch
deleted file mode 100644
index d38497e0aebe..000000000000
--- a/dev-lang/perl/files/perl-5.8.0-prelink-lpthread.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- hints/linux.sh.orig	2003-02-14 18:11:50.000000000 -0800
-+++ hints/linux.sh	2003-02-14 18:12:01.000000000 -0800
-@@ -43,7 +43,7 @@
- # 'kaffe' has a /usr/lib/libnet.so which is not at all relevent for perl.
- set `echo X "$libswanted "| sed -e 's/ bsd / /' -e 's/ net / /'`
- shift
--libswanted="$*"
-+libswanted="pthread $*"
- 
- # If you have glibc, then report the version for ./myconfig bug reporting.
- # (Configure doesn't need to know the specific version since it just uses
diff --git a/dev-lang/perl/files/perl-5.8.0-reorder-INC.patch b/dev-lang/perl/files/perl-5.8.0-reorder-INC.patch
deleted file mode 100644
index 2480b6416811..000000000000
--- a/dev-lang/perl/files/perl-5.8.0-reorder-INC.patch
+++ /dev/null
@@ -1,88 +0,0 @@
-This is largely lifted from Debian's patch 53.  The notion is to
-change the @INC ordering so that vendor can trump core, and site can
-trump vendor.
-
---- perl.c.stock	2003-06-24 23:16:10.000000000 -0700
-+++ perl.c	2003-06-24 23:18:50.000000000 -0700
-@@ -3679,9 +3679,9 @@
-     incpush(APPLLIB_EXP, TRUE, TRUE);
- #endif
- 
--#ifdef ARCHLIB_EXP
--    incpush(ARCHLIB_EXP, FALSE, FALSE);
--#endif
-+    /* for configuration where /usr is mounted ro (CPAN::Config, Net::Config) */
-+    incpush("/etc/perl", FALSE, FALSE);
-+
- #ifdef MACOS_TRADITIONAL
-     {
- 	Stat_t tmpstatbuf;
-@@ -3708,8 +3708,6 @@
- #endif
- #if defined(WIN32)
-     incpush(PRIVLIB_EXP, TRUE, FALSE);
--#else
--    incpush(PRIVLIB_EXP, FALSE, FALSE);
- #endif
- 
- #ifdef SITEARCH_EXP
-@@ -3752,6 +3750,59 @@
-     incpush(PERL_VENDORLIB_STEM, FALSE, TRUE);
- #endif
- 
-+    incpush(ARCHLIB_EXP, FALSE, FALSE);
-+    incpush(PRIVLIB_EXP, FALSE, FALSE);
-+
-+    /* Non-versioned site directory for local modules and for
-+       compatability with the previous packages' site dirs */
-+    incpush("/usr/local/lib/site_perl", TRUE, FALSE);
-+
-+#ifdef PERL_INC_VERSION_LIST
-+    {
-+	struct stat s;
-+
-+	/* add small buffer in case old versions are longer than the
-+	   current version */
-+	char sitearch[sizeof(SITEARCH_EXP)+16] = SITEARCH_EXP;
-+	char sitelib[sizeof(SITELIB_EXP)+16] = SITELIB_EXP;
-+	char const *vers[] = { PERL_INC_VERSION_LIST };
-+	char const **p;
-+
-+	char *arch_vers = strrchr(sitearch, '/');
-+	char *lib_vers = strrchr(sitelib, '/');
-+
-+	if (arch_vers && isdigit(*++arch_vers))
-+	    *arch_vers = 0;
-+	else
-+	    arch_vers = 0;
-+
-+	if (lib_vers && isdigit(*++lib_vers))
-+	    *lib_vers = 0;
-+	else
-+	    lib_vers = 0;
-+
-+	/* there is some duplication here as incpush does something
-+	   similar internally, but required as sitearch is not a
-+	   subdirectory of sitelib */
-+	for (p = vers; *p; p++)
-+	{
-+	    if (arch_vers)
-+	    {
-+		strcpy(arch_vers, *p);
-+		if (PerlLIO_stat(sitearch, &s) >= 0 && S_ISDIR(s.st_mode))
-+		    incpush(sitearch, FALSE, FALSE);
-+	    }
-+
-+	    if (lib_vers)
-+	    {
-+		strcpy(lib_vers, *p);
-+		if (PerlLIO_stat(sitelib, &s) >= 0 && S_ISDIR(s.st_mode))
-+		    incpush(sitelib, FALSE, FALSE);
-+	    }
-+	}
-+    }
-+#endif
-+
- #ifdef PERL_OTHERLIBDIRS
-     incpush(PERL_OTHERLIBDIRS, TRUE, TRUE);
- #endif
diff --git a/dev-lang/perl/files/perl-5.8.0-sockatmark-should-__THROW.patch b/dev-lang/perl/files/perl-5.8.0-sockatmark-should-__THROW.patch
deleted file mode 100644
index c3ca0484ace2..000000000000
--- a/dev-lang/perl/files/perl-5.8.0-sockatmark-should-__THROW.patch
+++ /dev/null
@@ -1,12 +0,0 @@
---- perl-5.8.0/perl.h.orig	2002-12-28 13:23:06.000000000 +0200
-+++ perl-5.8.0/perl.h	2002-12-28 13:23:47.000000000 +0200
-@@ -717,7 +717,7 @@
- /* sockatmark() is so new (2001) that many places might have it hidden
-  * behind some -D_BLAH_BLAH_SOURCE guard. */
- #if defined(HAS_SOCKATMARK) && !defined(HAS_SOCKATMARK_PROTO)
--int sockatmark(int);
-+int sockatmark(int) __THROW;
- #endif
- 
- #ifdef SETERRNO
-
diff --git a/dev-lang/perl/perl-5.8.0-r11.ebuild b/dev-lang/perl/perl-5.8.0-r11.ebuild
deleted file mode 100644
index 98e9151599f5..000000000000
--- a/dev-lang/perl/perl-5.8.0-r11.ebuild
+++ /dev/null
@@ -1,316 +0,0 @@
-# Copyright 1999-2004 Gentoo Technologies, Inc.
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/dev-lang/perl/perl-5.8.0-r11.ebuild,v 1.10 2004/01/18 06:46:58 rac Exp $
-
-inherit eutils flag-o-matic
-
-# Perl has problems compiling with -Os in your flags
-replace-flags "-Os" "-O2"
-# This flag makes compiling crash in interesting ways
-filter-flags -malign-double
-
-# The slot of this binary compat version of libperl.so
-PERLSLOT="1"
-
-SHORT_PV="`echo ${PV} | cut -d. -f1,2`"
-MY_P="${P/lib}"
-S="${WORKDIR}/${MY_P}"
-DESCRIPTION="Larry Wall's Practical Extraction and Reporting Language"
-DB_FILE_VERSION="1.806"
-SAFE_VERSION="2.09"
-SRC_URI="ftp://ftp.perl.org/pub/CPAN/src/${MY_P}.tar.gz
-	ftp://ftp.perl.org/pub/CPAN/modules/by-module/DB_File/DB_File-${DB_FILE_VERSION}.tar.gz
-	ftp://ftp.perl.org/pub/CPAN/modules/by-module/Safe/Safe-${SAFE_VERSION}.tar.gz"
-HOMEPAGE="http://www.perl.org/"
-SLOT="0"
-LIBPERL="libperl.so.${PERLSLOT}.${SHORT_PV}"
-LICENSE="Artistic GPL-2"
-KEYWORDS="~x86 sparc ~ppc ~alpha ~mips ~hppa amd64"
-IUSE="berkdb doc gdbm threads"
-
-DEPEND="sys-apps/groff
-	berkdb? ( sys-libs/db )
-	gdbm? ( >=sys-libs/gdbm-1.8.0 )
-	>=sys-apps/portage-2.0.45-r5
-	=sys-devel/libperl-${PV}*"
-RDEPEND="berkdb? ( sys-libs/db )
-	gdbm? ( >=sys-libs/gdbm-1.8.0 )"
-
-pkg_setup() {
-	# I think this should rather be displayed if you *have* 'threads'
-	# in USE if it could break things ...
-	if [ -n "`use threads`" ]
-	then
-		ewarn ""
-		ewarn "PLEASE NOTE: You are compiling perl-5.8 with"
-		ewarn "threading enabled."
-		ewarn "Threading is not supported by all applications "
-		ewarn "that compile against perl. You use threading at "
-		ewarn "your own discretion. "
-		ewarn ""
-		sleep 10
-	else
-		ewarn ""
-		ewarn "PLEASE NOTE: If you want to compile perl-5.8 with"
-		ewarn "threading enabled , you must restart this emerge"
-		ewarn "with USE=threads emerge...."
-		ewarn "Threading is not supported by all applications "
-		ewarn "that compile against perl. You use threading at "
-		ewarn "your own discretion. "
-		ewarn ""
-	fi
-
-	if [ ! -f /usr/lib/${LIBPERL} ]
-	then
-		# Make sure we have libperl installed ...
-		eerror "Cannot find /usr/lib/${LIBPERL}!  Make sure that you"
-		eerror "have sys-libs/libperl installed properly ..."
-		die "Cannot find /usr/lib/${LIBPERL}!"
-	fi
-}
-
-src_unpack() {
-
-	unpack ${A}
-
-	# Fix the definition of 'int sockatmark(int);' in perl.h to have __THROW.
-	# This fixes bug #12605.
-	# <azarah@gentoo.org> (28 Dec 2002).
-	cd ${S}; epatch ${FILESDIR}/${P}-sockatmark-should-__THROW.patch
-
-	# Get -lpthread linked before -lc.  This is needed
-	# when using glibc >= 2.3, or else runtime signal
-	# handling breaks.  Fixes bug #14380.
-	# <rac@gentoo.org> (14 Feb 2003)
-	cd ${S}; epatch ${FILESDIR}/${P}-prelink-lpthread.patch
-
-	# Patch perldoc to not abort when it attempts to search
-	# nonexistent directories; fixes bug #16589.
-	# <rac@gentoo.org> (28 Feb 2003)
-	cd ${S}; epatch ${FILESDIR}/${P}-perldoc-emptydirs.patch
-
-	# to allow building with db4, must replace the DB_File in the core
-	# with a newer one from CPAN.
-
-	einfo "Replacing core DB_File with newer version ${DB_FILE_VERSION}"
-	rm -rf ${S}/ext/DB_File
-	cp -R ${WORKDIR}/DB_File-${DB_FILE_VERSION} ${S}/ext/DB_File
-
-	# there is a security problem in the Safe.pm version in the core.
-	einfo "Replacing core Safe.pm with newer version ${SAFE_VERSION}"
-	chmod +w ${S}/ext/Opcode/Safe.pm
-	cp ${WORKDIR}/Safe-${SAFE_VERSION}/Safe.pm ${S}/ext/Opcode/
-}
-
-src_compile() {
-
-	export LC_ALL="C"
-	local myconf=""
-
-	if [ "`use threads`" ]
-	then
-		einfo "using threads"
-		mythreading="-multi"
-		myconf="-Dusethreads ${myconf}"
-		myarch="${CHOST%%-*}-linux-thread"
-	else
-		myarch="${CHOST%%-*}-linux"
-	fi
-
-	if [ "`use gdbm`" ]
-	then
-		myconf="${myconf} -Di_gdbm"
-	fi
-	if [ "`use berkdb`" ]
-	then
-		myconf="${myconf} -Di_db -Di_ndbm"
-	else
-		myconf="${myconf} -Ui_db -Ui_ndbm"
-	fi
-	if [ "`use mips`" ]
-	then
-		# this is needed because gcc 3.3-compiled kernels will hang
-		# the machine trying to run this test - check with `Kumba
-		# <rac@gentoo.org> 2003.06.26
-		myconf="${myconf} -Dd_u32align"
-	fi
-	if [ "`use sparc`" ]
-	then
-		myconf="${myconf} -Ud_longdbl"
-	fi
-	if [ "`use sparc64`" ]
-	then
-		myconf="${myconf} -Ud_longdbl"
-	fi
-
-cat > config.over <<EOF
-installprefix=${D}/usr
-installarchlib=\`echo \$installarchlib | sed "s!\$prefix!\$installprefix!"\`
-installbin=\`echo \$installbin | sed "s!\$prefix!\$installprefix!"\`
-installman1dir=\`echo \$installman1dir | sed "s!\$prefix!\$installprefix!"\`
-installman3dir=\`echo \$installman3dir | sed "s!\$prefix!\$installprefix!"\`
-installman1dir=\`echo \$installman1dir | sed "s!/share/share/!/share/!"\`
-installman3dir=\`echo \$installman3dir | sed "s!/share/share/!/share/!"\`
-installman1dir=\`echo \$installman1dir | sed "s!/usr/man/!/usr/share/man/!"\`
-installman3dir=\`echo \$installman3dir | sed "s!/usr/man/!/usr/share/man/!"\`
-man1ext=1
-man3ext=3pm
-installprivlib=\`echo \$installprivlib | sed "s!\$prefix!\$installprefix!"\`
-installscript=\`echo \$installscript | sed "s!\$prefix!\$installprefix!"\`
-installsitelib=\`echo \$installsitelib | sed "s!\$prefix!\$installprefix!"\`
-installsitearch=\`echo \$installsitearch | sed "s!\$prefix!\$installprefix!"\`
-EOF
-	sleep 10
-	sh Configure -des \
-		-Darchname="${myarch}" \
-		-Dcc="${CC:-gcc}" \
-		-Dprefix='/usr' \
-		-Dvendorprefix='/usr' \
-		-Dsiteprefix='/usr' \
-		-Dlocincpth=' ' \
-		-Doptimize="${CFLAGS}" \
-		-Duselargefiles \
-		-Dd_dosuid \
-		-Dd_semctl_semun \
-		-Dscriptdir=/usr/bin \
-		-Dman3ext='3pm' \
-		-Dcf_by='Gentoo' \
-		-Ud_csh \
-		${myconf} || die "Unable to configure"
-
-	MAKEOPTS="${MAKEOPTS} -j1" emake || die "Unable to make"
-
-	emake -i test CCDLFLAGS=
-}
-
-src_install() {
-
-	export LC_ALL="C"
-
-	# Need to do this, else apps do not link to dynamic version of
-	# the library ...
-	local coredir="/usr/lib/perl5/${PV}/${myarch}${mythreading}/CORE"
-	dodir ${coredir}
-	dosym ../../../../${LIBPERL} ${coredir}/${LIBPERL}
-	dosym ../../../../${LIBPERL} ${coredir}/libperl.so.${PERLSLOT}
-	dosym ../../../../${LIBPERL} ${coredir}/libperl.so
-
-	# Fix for "stupid" modules and programs
-	dodir /usr/lib/perl5/site_perl/${PV}/${myarch}${mythreading}
-
-	make DESTDIR="${D}" \
-		INSTALLMAN1DIR="${D}/usr/share/man/man1" \
-		INSTALLMAN3DIR="${D}/usr/share/man/man3" \
-		install || die "Unable to make install"
-
-	cp -f utils/h2ph utils/h2ph_patched
-	epatch ${FILESDIR}/perl-5.8.0-RC2-special-h2ph-not-failing-on-machine_ansi_header.patch
-
-	LD_LIBRARY_PATH=. ./perl -Ilib utils/h2ph_patched \
-		-a -d ${D}/usr/lib/perl5/${PV}/${myarch}${mythreading} <<EOF
-asm/termios.h
-syscall.h
-syslimits.h
-syslog.h
-sys/ioctl.h
-sys/socket.h
-sys/time.h
-wait.h
-EOF
-
-	# This is to fix a missing c flag for backwards compat
-	for i in `find ${D}/usr/lib/perl5 -iname "Config.pm"`;do
-		sed -e "s:ccflags=':ccflags='-DPERL5 :" \
-		    -e "s:cppflags=':cppflags='-DPERL5 :" \
-			${i} > ${i}.new &&\
-			mv ${i}.new ${i} || die "Sed failed"
-	done
-
-	# A poor fix for the miniperl issues
-	dosed 's:./miniperl:/usr/bin/perl:' /usr/lib/perl5/${PV}/ExtUtils/xsubpp
-	fperms 0444 /usr/lib/perl5/${PV}/ExtUtils/xsubpp
-	dosed 's:./miniperl:/usr/bin/perl:' /usr/bin/xsubpp
-	fperms 0755 /usr/bin/xsubpp
-
-	./perl installman \
-		--man1dir="${D}/usr/share/man/man1" --man1ext='1' \
-		--man3dir="${D}/usr/share/man/man3" --man3ext='3'
-
-	# This removes ${D} from Config.pm and .packlist
-	for i in `find ${D} -iname "Config.pm"` `find ${D} -iname ".packlist"`;do
-		einfo "Removing ${D} from ${i}..."
-		sed -e "s:${D}::" ${i} > ${i}.new &&\
-			mv ${i}.new ${i} || die "Sed failed"
-	done
-
-	dodoc Changes* Artistic Copying README Todo* AUTHORS
-
-	if [ -n "`use doc`" ]
-	then
-		# HTML Documentation
-		# We expect errors, warnings, and such with the following.
-
-		dodir /usr/share/doc/${PF}/html
-		./perl installhtml \
-			--podroot='.' \
-			--podpath='lib:ext:pod:vms' \
-			--recurse \
-			--htmldir="${D}/usr/share/doc/${PF}/html" \
-			--libpods='perlfunc:perlguts:perlvar:perlrun:perlop'
-	fi
-}
-
-pkg_postinst() {
-
-	# Make sure we do not have stale/invalid libperl.so 's ...
-	if [ -f "${ROOT}usr/lib/libperl.so" -a ! -L "${ROOT}usr/lib/libperl.so" ]
-	then
-		mv -f ${ROOT}usr/lib/libperl.so ${ROOT}usr/lib/libperl.so.old
-	fi
-
-	local perllib="`readlink -f ${ROOT}usr/lib/libperl.so | sed -e 's:^.*/::'`"
-
-	# If we are installing perl, we need the /usr/lib/libperl.so symlink to
-	# point to the version of perl we are running, else builing something
-	# against libperl.so will break ...
-	if [ "${perllib}" != "${LIBPERL}" ]
-	then
-		# Delete stale symlinks
-		rm -f ${ROOT}usr/lib/libperl.so
-		rm -f ${ROOT}usr/lib/libperl.so.${PERLSLOT}
-		# Regenerate libperl.so.${PERLSLOT}
-		ln -snf ${LIBPERL} ${ROOT}usr/lib/libperl.so.${PERLSLOT}
-		# Create libperl.so (we use the *soname* versioned lib here ..)
-		ln -snf libperl.so.${PERLSLOT} ${ROOT}usr/lib/libperl.so
-	fi
-
-	if [ "${ROOT}" = "/" ]
-	then
-		ebegin "Converting C header files to the corresponding Perl format"
-		cd /usr/include; h2ph -r -l .
-	fi
-
-	eerror ""
-	eerror "If this is an upgrade to a perl 5.6.1 system,"
-	eerror "~OR~ an upgrade to a previous Gentoo release"
-	eerror "of perl 5.8.0, prior to -r8 "
-	eerror "you may need to recompile applications that"
-	eerror "were emerged against the old libperl.so"
-	eerror ""
-	eerror "${FILESDIR}/libperl_rebuilder "
-	eerror "is provided to assist with this. "
-	eerror "PLEASE DO NOT INTERRUPT THE RUNNING OF THIS SCRIPT."
-	eerror "Part of the rebuilding of applications compiled against "
-	eerror "your old libperl involves temporarily unmerging"
-	eerror "them - interruptions could leave you with unmerged"
-	eerror "packages before they can be remerged."
-	eerror ""
-	eerror "If you have run the rebuilder and a package still gives"
-	eerror "you trouble, and re-emerging it fails to correct"
-	eerror "the problem, please check http://bugs.gentoo.org/"
-	eerror "for more information or to report a bug."
-	eerror ""
-	eerror ""
-}
-
-
diff --git a/dev-lang/perl/perl-5.8.0-r12.ebuild b/dev-lang/perl/perl-5.8.0-r12.ebuild
deleted file mode 100644
index 0c0f7867177e..000000000000
--- a/dev-lang/perl/perl-5.8.0-r12.ebuild
+++ /dev/null
@@ -1,327 +0,0 @@
-# Copyright 1999-2004 Gentoo Technologies, Inc.
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/dev-lang/perl/perl-5.8.0-r12.ebuild,v 1.17 2004/02/21 00:53:58 mr_bones_ Exp $
-
-inherit eutils flag-o-matic
-
-# Perl has problems compiling with -Os in your flags
-replace-flags "-Os" "-O2"
-# This flag makes compiling crash in interesting ways
-filter-flags -malign-double
-
-# The slot of this binary compat version of libperl.so
-PERLSLOT="1"
-
-SHORT_PV="`echo ${PV} | cut -d. -f1,2`"
-MY_P="${P/lib}"
-S="${WORKDIR}/${MY_P}"
-DESCRIPTION="Larry Wall's Practical Extraction and Reporting Language"
-DB_FILE_VERSION="1.806"
-SAFE_VERSION="2.09"
-SRC_URI="ftp://ftp.perl.org/pub/CPAN/src/${MY_P}.tar.gz
-	ftp://ftp.perl.org/pub/CPAN/modules/by-module/DB_File/DB_File-${DB_FILE_VERSION}.tar.gz
-	ftp://ftp.perl.org/pub/CPAN/modules/by-module/Safe/Safe-${SAFE_VERSION}.tar.gz"
-HOMEPAGE="http://www.perl.org/"
-SLOT="0"
-LIBPERL="libperl.so.${PERLSLOT}.${SHORT_PV}"
-LICENSE="Artistic GPL-2"
-KEYWORDS="x86 amd64 sparc ppc alpha mips hppa ia64"
-IUSE="berkdb doc gdbm threads"
-
-DEPEND="sys-apps/groff
-	berkdb? ( sys-libs/db )
-	gdbm? ( >=sys-libs/gdbm-1.8.0 )
-	>=sys-apps/portage-2.0.48-r4
-	=sys-devel/libperl-${PV}*
-	!<dev-perl/ExtUtils-MakeMaker-6.05-r6
-	!<dev-perl/File-Spec-0.84-r1
-	!<dev-perl/Test-Simple-0.47-r1"
-RDEPEND="berkdb? ( sys-libs/db )
-	gdbm? ( >=sys-libs/gdbm-1.8.0 )"
-
-pkg_setup() {
-	# I think this should rather be displayed if you *have* 'threads'
-	# in USE if it could break things ...
-	if [ -n "`use threads`" ]
-	then
-		ewarn ""
-		ewarn "PLEASE NOTE: You are compiling perl-5.8 with"
-		ewarn "threading enabled."
-		ewarn "Threading is not supported by all applications "
-		ewarn "that compile against perl. You use threading at "
-		ewarn "your own discretion. "
-		ewarn ""
-		sleep 10
-	else
-		ewarn ""
-		ewarn "PLEASE NOTE: If you want to compile perl-5.8 with"
-		ewarn "threading enabled , you must restart this emerge"
-		ewarn "with USE=threads emerge...."
-		ewarn "Threading is not supported by all applications "
-		ewarn "that compile against perl. You use threading at "
-		ewarn "your own discretion. "
-		ewarn ""
-	fi
-
-	if [ ! -f /usr/lib/${LIBPERL} ]
-	then
-		# Make sure we have libperl installed ...
-		eerror "Cannot find /usr/lib/${LIBPERL}!  Make sure that you"
-		eerror "have sys-libs/libperl installed properly ..."
-		die "Cannot find /usr/lib/${LIBPERL}!"
-	fi
-}
-
-src_unpack() {
-
-	unpack ${A}
-
-	# Fix the definition of 'int sockatmark(int);' in perl.h to have __THROW.
-	# This fixes bug #12605.
-	# <azarah@gentoo.org> (28 Dec 2002).
-	cd ${S}; epatch ${FILESDIR}/${P}-sockatmark-should-__THROW.patch
-
-	# Get -lpthread linked before -lc.  This is needed
-	# when using glibc >= 2.3, or else runtime signal
-	# handling breaks.  Fixes bug #14380.
-	# <rac@gentoo.org> (14 Feb 2003)
-	cd ${S}; epatch ${FILESDIR}/${P}-prelink-lpthread.patch
-
-	# Patch perldoc to not abort when it attempts to search
-	# nonexistent directories; fixes bug #16589.
-	# <rac@gentoo.org> (28 Feb 2003)
-	cd ${S}; epatch ${FILESDIR}/${P}-perldoc-emptydirs.patch
-
-	# to allow building with db4, must replace the DB_File in the core
-	# with a newer one from CPAN.
-
-	einfo "Replacing core DB_File with newer version ${DB_FILE_VERSION}"
-	rm -rf ${S}/ext/DB_File
-	cp -R ${WORKDIR}/DB_File-${DB_FILE_VERSION} ${S}/ext/DB_File
-
-	# there is a security problem in the Safe.pm version in the core.
-	einfo "Replacing core Safe.pm with newer version ${SAFE_VERSION}"
-	chmod +w ${S}/ext/Opcode/Safe.pm
-	cp ${WORKDIR}/Safe-${SAFE_VERSION}/Safe.pm ${S}/ext/Opcode/
-
-	# this lays the groundwork for solving the issue of what happens
-	# when people (or ebuilds) install different versiosn of modules
-	# that are in the core, by rearranging the @INC directory to look
-	# site -> vendor -> core.
-	cd ${S}; epatch ${FILESDIR}/${P}-reorder-INC.patch
-}
-
-src_compile() {
-
-	export LC_ALL="C"
-	local myconf=""
-
-	if [ "`use threads`" ]
-	then
-		einfo "using threads"
-		mythreading="-multi"
-		myconf="-Dusethreads ${myconf}"
-		myarch="${CHOST%%-*}-linux-thread"
-	else
-		myarch="${CHOST%%-*}-linux"
-	fi
-
-	if [ "`use gdbm`" ]
-	then
-		myconf="${myconf} -Di_gdbm"
-	fi
-	if [ "`use berkdb`" ]
-	then
-		myconf="${myconf} -Di_db -Di_ndbm"
-	else
-		myconf="${myconf} -Ui_db -Ui_ndbm"
-	fi
-	if [ "`use mips`" ]
-	then
-		# this is needed because gcc 3.3-compiled kernels will hang
-		# the machine trying to run this test - check with `Kumba
-		# <rac@gentoo.org> 2003.06.26
-		myconf="${myconf} -Dd_u32align"
-	fi
-	if [ "`use sparc`" ]
-	then
-		myconf="${myconf} -Ud_longdbl"
-	fi
-	if [ "`use sparc64`" ]
-	then
-		myconf="${myconf} -Ud_longdbl"
-	fi
-
-	[ "${ARCH}" = "hppa" ] && append-flags -fPIC
-
-cat > config.over <<EOF
-installprefix=${D}/usr
-installarchlib=\`echo \$installarchlib | sed "s!\$prefix!\$installprefix!"\`
-installbin=\`echo \$installbin | sed "s!\$prefix!\$installprefix!"\`
-installman1dir=\`echo \$installman1dir | sed "s!\$prefix!\$installprefix!"\`
-installman3dir=\`echo \$installman3dir | sed "s!\$prefix!\$installprefix!"\`
-installman1dir=\`echo \$installman1dir | sed "s!/share/share/!/share/!"\`
-installman3dir=\`echo \$installman3dir | sed "s!/share/share/!/share/!"\`
-installman1dir=\`echo \$installman1dir | sed "s!/usr/man/!/usr/share/man/!"\`
-installman3dir=\`echo \$installman3dir | sed "s!/usr/man/!/usr/share/man/!"\`
-man1ext=1
-man3ext=3pm
-installprivlib=\`echo \$installprivlib | sed "s!\$prefix!\$installprefix!"\`
-installscript=\`echo \$installscript | sed "s!\$prefix!\$installprefix!"\`
-installsitelib=\`echo \$installsitelib | sed "s!\$prefix!\$installprefix!"\`
-installsitearch=\`echo \$installsitearch | sed "s!\$prefix!\$installprefix!"\`
-EOF
-	sleep 10
-	sh Configure -des \
-		-Darchname="${myarch}" \
-		-Dcc="${CC:-gcc}" \
-		-Dprefix='/usr' \
-		-Dvendorprefix='/usr' \
-		-Dsiteprefix='/usr' \
-		-Dlocincpth=' ' \
-		-Doptimize="${CFLAGS}" \
-		-Duselargefiles \
-		-Dd_dosuid \
-		-Dd_semctl_semun \
-		-Dscriptdir=/usr/bin \
-		-Dman3ext='3pm' \
-		-Dcf_by='Gentoo' \
-		-Ud_csh \
-		${myconf} || die "Unable to configure"
-
-	MAKEOPTS="${MAKEOPTS} -j1" emake || die "Unable to make"
-
-	emake -i test CCDLFLAGS=
-}
-
-src_install() {
-
-	export LC_ALL="C"
-
-	# Need to do this, else apps do not link to dynamic version of
-	# the library ...
-	local coredir="/usr/lib/perl5/${PV}/${myarch}${mythreading}/CORE"
-	dodir ${coredir}
-	dosym ../../../../${LIBPERL} ${coredir}/${LIBPERL}
-	dosym ../../../../${LIBPERL} ${coredir}/libperl.so.${PERLSLOT}
-	dosym ../../../../${LIBPERL} ${coredir}/libperl.so
-
-	# Fix for "stupid" modules and programs
-	dodir /usr/lib/perl5/site_perl/${PV}/${myarch}${mythreading}
-
-	make DESTDIR="${D}" \
-		INSTALLMAN1DIR="${D}/usr/share/man/man1" \
-		INSTALLMAN3DIR="${D}/usr/share/man/man3" \
-		install || die "Unable to make install"
-
-	cp -f utils/h2ph utils/h2ph_patched
-	epatch ${FILESDIR}/perl-5.8.0-RC2-special-h2ph-not-failing-on-machine_ansi_header.patch
-
-	LD_LIBRARY_PATH=. ./perl -Ilib utils/h2ph_patched \
-		-a -d ${D}/usr/lib/perl5/${PV}/${myarch}${mythreading} <<EOF
-asm/termios.h
-syscall.h
-syslimits.h
-syslog.h
-sys/ioctl.h
-sys/socket.h
-sys/time.h
-wait.h
-EOF
-
-	# This is to fix a missing c flag for backwards compat
-	for i in `find ${D}/usr/lib/perl5 -iname "Config.pm"`;do
-		sed -e "s:ccflags=':ccflags='-DPERL5 :" \
-		    -e "s:cppflags=':cppflags='-DPERL5 :" \
-			${i} > ${i}.new &&\
-			mv ${i}.new ${i} || die "Sed failed"
-	done
-
-	# A poor fix for the miniperl issues
-	dosed 's:./miniperl:/usr/bin/perl:' /usr/lib/perl5/${PV}/ExtUtils/xsubpp
-	fperms 0444 /usr/lib/perl5/${PV}/ExtUtils/xsubpp
-	dosed 's:./miniperl:/usr/bin/perl:' /usr/bin/xsubpp
-	fperms 0755 /usr/bin/xsubpp
-
-	./perl installman \
-		--man1dir="${D}/usr/share/man/man1" --man1ext='1' \
-		--man3dir="${D}/usr/share/man/man3" --man3ext='3'
-
-	# This removes ${D} from Config.pm and .packlist
-	for i in `find ${D} -iname "Config.pm"` `find ${D} -iname ".packlist"`;do
-		einfo "Removing ${D} from ${i}..."
-		sed -e "s:${D}::" ${i} > ${i}.new &&\
-			mv ${i}.new ${i} || die "Sed failed"
-	done
-
-	dodoc Changes* Artistic Copying README Todo* AUTHORS
-
-	if [ -n "`use doc`" ]
-	then
-		# HTML Documentation
-		# We expect errors, warnings, and such with the following.
-
-		dodir /usr/share/doc/${PF}/html
-		./perl installhtml \
-			--podroot='.' \
-			--podpath='lib:ext:pod:vms' \
-			--recurse \
-			--htmldir="${D}/usr/share/doc/${PF}/html" \
-			--libpods='perlfunc:perlguts:perlvar:perlrun:perlop'
-	fi
-}
-
-pkg_postinst() {
-
-	# Make sure we do not have stale/invalid libperl.so 's ...
-	if [ -f "${ROOT}usr/lib/libperl.so" -a ! -L "${ROOT}usr/lib/libperl.so" ]
-	then
-		mv -f ${ROOT}usr/lib/libperl.so ${ROOT}usr/lib/libperl.so.old
-	fi
-
-	local perllib="`readlink -f ${ROOT}usr/lib/libperl.so | sed -e 's:^.*/::'`"
-
-	# If we are installing perl, we need the /usr/lib/libperl.so symlink to
-	# point to the version of perl we are running, else builing something
-	# against libperl.so will break ...
-	if [ "${perllib}" != "${LIBPERL}" ]
-	then
-		# Delete stale symlinks
-		rm -f ${ROOT}usr/lib/libperl.so
-		rm -f ${ROOT}usr/lib/libperl.so.${PERLSLOT}
-		# Regenerate libperl.so.${PERLSLOT}
-		ln -snf ${LIBPERL} ${ROOT}usr/lib/libperl.so.${PERLSLOT}
-		# Create libperl.so (we use the *soname* versioned lib here ..)
-		ln -snf libperl.so.${PERLSLOT} ${ROOT}usr/lib/libperl.so
-	fi
-
-	if [ "${ROOT}" = "/" ]
-	then
-		ebegin "Converting C header files to the corresponding Perl format"
-		cd /usr/include; h2ph  -r -l .
-	fi
-
-	eerror ""
-	eerror "If this is an upgrade to a perl 5.6.1 system,"
-	eerror "~OR~ an upgrade to a previous Gentoo release"
-	eerror "of perl 5.8.0, prior to -r8 "
-	eerror "you may need to recompile applications that"
-	eerror "were emerged against the old libperl.so"
-	eerror ""
-	eerror "${FILESDIR}/libperl_rebuilder "
-	eerror "is provided to assist with this. "
-	eerror "PLEASE DO NOT INTERRUPT THE RUNNING OF THIS SCRIPT."
-	eerror "Part of the rebuilding of applications compiled against "
-	eerror "your old libperl involves temporarily unmerging"
-	eerror "them - interruptions could leave you with unmerged"
-	eerror "packages before they can be remerged."
-	eerror ""
-	eerror "If you have run the rebuilder and a package still gives"
-	eerror "you trouble, and re-emerging it fails to correct"
-	eerror "the problem, please check http://bugs.gentoo.org/"
-	eerror "for more information or to report a bug."
-	eerror ""
-	eerror ""
-}
-
-
diff --git a/dev-lang/perl/perl-5.8.0-r9.ebuild b/dev-lang/perl/perl-5.8.0-r9.ebuild
deleted file mode 100644
index e41fa70809ed..000000000000
--- a/dev-lang/perl/perl-5.8.0-r9.ebuild
+++ /dev/null
@@ -1,452 +0,0 @@
-# Copyright 1999-2004 Gentoo Technologies, Inc.
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/dev-lang/perl/perl-5.8.0-r9.ebuild,v 1.11 2004/02/21 00:53:58 mr_bones_ Exp $
-
-# The basic theory based on comments from Daniel Robbins <drobbins@gentoo.org>.
-#
-# We split the perl ebuild into libperl and perl.  The layout is as follows:
-#
-# libperl:
-#
-#  This is a slotted (SLOT=[0-9]*) ebuild, meaning we should be able to have a
-#  few versions that are not binary compadible installed.
-#
-#  How we get libperl.so multi-versioned, is by adding to the link command:
-#
-#    -Wl,-soname -Wl,libperl.so.`echo $(LIBPERL) | cut -d. -f3`
-#
-#  This gives us:
-#
-#    $(LIBPERL): $& perl$(OBJ_EXT) $(obj) $(LIBPERLEXPORT)
-#        $(LD) -o $@ $(SHRPLDFLAGS) perl$(OBJ_EXT) $(obj) \
-#              -Wl,-soname -Wl,libperl.so.`echo $(LIBPERL) | cut -d. -f3`
-#
-#  We then configure perl with LIBPERL set to:
-#
-#    LIBPERL="libperl.so.${SLOT}.`echo ${PV} | cut -d. -f1,2`"
-#
-#  Or with the variables defined in this ebuild:
-#
-#    LIBPERL="libperl.so.${PERLSLOT}.${SHORT_PV}"
-#
-#  The result is that our 'soname' is 'libperl.so.${PERLSLOT}' (at the time of
-#  writing this for perl-5.8.0, 'libperl.so.1'), causing all apps that is linked
-#  to libperl to link to 'libperl.so.${PERLSLOT}'.
-#
-#  If a new perl version, perl-z.y.z comes out that have a libperl not binary
-#  compatible with the previous version, we just keep the previous libperl
-#  installed, and all apps linked to it will still be able to use:
-#
-#    libperl.so.${PERLSLOT}'
-#
-#  while the new ones will link to:
-#
-#    libperl.so.$((PERLSLOT+1))'
-#
-# perl:
-#
-#  Not much to this one.  It compiles with a static libperl.a, and are unslotted
-#  (meaning SLOT=0).  We thus always have the latest *stable* perl version
-#  installed, with corrisponding version of libperl.  The perl ebuild will of
-#  course DEPEND on libperl.
-#
-# Martin Schlemmer <azarah@gentoo.org> (28 Dec 2002).
-
-inherit eutils flag-o-matic
-
-# Perl has problems compiling with -Os in your flags
-replace-flags "-Os" "-O2"
-# This flag makes compiling crash in interesting ways
-filter-flags -malign-double
-
-# The slot of this binary compat version of libperl.so
-PERLSLOT="1"
-
-SHORT_PV="`echo ${PV} | cut -d. -f1,2`"
-MY_P="${P/lib}"
-S="${WORKDIR}/${MY_P}"
-DESCRIPTION="Larry Wall's Practical Extraction and Reporting Language"
-SRC_URI="ftp://ftp.perl.org/pub/CPAN/src/${MY_P}.tar.gz"
-HOMEPAGE="http://www.perl.org/"
-
-if [ "${PN}" = "libperl" ]
-then
-	SLOT="${PERLSLOT}"
-else
-	SLOT="0"
-fi
-
-LIBPERL="libperl.so.${PERLSLOT}.${SHORT_PV}"
-
-LICENSE="Artistic GPL-2"
-KEYWORDS="x86 sparc ppc alpha ~mips hppa"
-IUSE="berkdb gdbm threads"
-
-DEPEND="sys-apps/groff
-	berkdb? ( >=sys-libs/db-3.2.3h-r3 =sys-libs/db-1.85-r1 )
-	gdbm? ( >=sys-libs/gdbm-1.8.0 )
-	>=sys-apps/portage-2.0.45-r5"
-if [ "${PN}" = "perl" ]
-then
-	DEPEND="${DEPEND}
-		=sys-devel/libperl-${PV}*"
-fi
-
-RDEPEND="berkdb? ( >=sys-libs/db-3.2.3h-r3 =sys-libs/db-1.85-r1 )
-	gdbm? ( >=sys-libs/gdbm-1.8.0 )"
-
-if [ "${PN}" = "libperl" ]
-then
-	# If we are installing a new version of libperl, we *have* to update perl as
-	# well, else all things linking to libperl.so will break at *build* time ..
-	PDEPEND=">=dev-lang/perl-${PV}"
-else
-	PDEPEND=">=dev-perl/Safe-2.09"
-fi
-
-pkg_setup() {
-	# I think this should rather be displayed if you *have* 'threads'
-	# in USE if it could break things ...
-	if [ -n "`use threads`" ]
-	then
-		ewarn ""
-		ewarn "PLEASE NOTE: You are compiling perl-5.8 with"
-		ewarn "threading enabled."
-		ewarn "Threading is not supported by all applications "
-		ewarn "that compile against perl. You use threading at "
-		ewarn "your own discretion. "
-		ewarn ""
-		sleep 10
-	else
-		ewarn ""
-		ewarn "PLEASE NOTE: If you want to compile perl-5.8 with"
-		ewarn "threading enabled , you must restart this emerge"
-		ewarn "with USE=threads emerge...."
-		ewarn "Threading is not supported by all applications "
-		ewarn "that compile against perl. You use threading at "
-		ewarn "your own discretion. "
-		ewarn ""
-		sleep 10
-	fi
-
-	if [ "${PN}" = "perl" -a ! -f /usr/lib/${LIBPERL} ]
-	then
-		# Make sure we have libperl installed ...
-		eerror "Cannot find /usr/lib/${LIBPERL}!  Make sure that you"
-		eerror "have sys-libs/libperl installed properly ..."
-		die "Cannot find /usr/lib/${LIBPERL}!"
-	fi
-}
-
-src_unpack() {
-
-	unpack ${A}
-
-	if [ "${PN}" = "libperl" ]
-	then
-		# Fix the build scripts to create libperl with a soname of ${SLOT}.
-		# We basically add:
-		#
-		#   -Wl,-soname -Wl,libperl.so.`echo $(LIBPERL) | cut -d. -f3`
-		#
-		# to the line that links libperl.so, and then set LIBPERL to:
-		#
-		#   LIBPERL=libperl.so.${SLOT}.`echo ${PV} | cut -d. -f1,2`
-		#
-		cd ${S}; epatch ${FILESDIR}/${P}-create-libperl-soname.patch
-	else
-		# Fix the definition of 'int sockatmark(int);' in perl.h to have __THROW.
-		# This fixes bug #12605.
-		# <azarah@gentoo.org> (28 Dec 2002).
-		cd ${S}; epatch ${FILESDIR}/${P}-sockatmark-should-__THROW.patch
-	fi
-}
-
-src_compile() {
-
-	export LC_ALL="C"
-	local myconf=""
-
-	if [ "`use threads`" ]
-	then
-		einfo "using threads"
-		mythreading="-multi"
-		myconf="-Dusethreads ${myconf}"
-		myarch="${CHOST%%-*}-linux-thread"
-	else
-		myarch="${CHOST%%-*}-linux"
-	fi
-
-	if [ "`use gdbm`" ]
-	then
-		myconf="${myconf} -Di_gdbm"
-	fi
-	if [ "`use berkdb`" ]
-	then
-		myconf="${myconf} -Di_db -Di_ndbm"
-	else
-		myconf="${myconf} -Ui_db -Ui_ndbm"
-	fi
-	if [ "`use sparc`" ]
-	then
-		myconf="${myconf} -Ud_longdbl"
-	fi
-	if [ "`use sparc64`" ]
-	then
-		myconf="${myconf} -Ud_longdbl"
-	fi
-	if [ "`use alpha`" -a "${CC}" == "ccc" ]
-	then
-		ewarn "Perl will not be built with berkdb support, use gcc if you needed it..."
-		myconf="${myconf} -Ui_db -Ui_ndbm"
-	fi
-
-	[ "${ARCH}" = "hppa" ] && append-flags -fPIC
-
-	if [ "${PN}" = "libperl" ]
-	then
-		rm -f config.sh Policy.sh
-
-		sh Configure -des \
-			-Darchname="${myarch}" \
-			-Dcccdlflags='-fPIC' \
-			-Dccdlflags='-rdynamic' \
-			-Dcc="${CC:-gcc}" \
-			-Dprefix='/usr' \
-			-Dvendorprefix='/usr' \
-			-Dsiteprefix='/usr' \
-			-Dlocincpth=' ' \
-			-Doptimize="${CFLAGS}" \
-			-Duselargefiles \
-			-Duseshrplib \
-			-Dman3ext='3pm' \
-			-Dlibperl="${LIBPERL}" \
-			-Dd_dosuid \
-			-Dd_semctl_semun \
-			-Dcf_by='Gentoo' \
-			-Ud_csh \
-			${myconf} || die
-
-		emake -f Makefile depend || die "Couldn't make libperl.so depends"
-		emake -f Makefile ${LIBPERL} || die "Unable to make libperl.so"
-		mv ${LIBPERL} ${WORKDIR}
-	else
-cat > config.over <<EOF
-installprefix=${D}/usr
-installarchlib=\`echo \$installarchlib | sed "s!\$prefix!\$installprefix!"\`
-installbin=\`echo \$installbin | sed "s!\$prefix!\$installprefix!"\`
-installman1dir=\`echo \$installman1dir | sed "s!\$prefix!\$installprefix!"\`
-installman3dir=\`echo \$installman3dir | sed "s!\$prefix!\$installprefix!"\`
-installman1dir=\`echo \$installman1dir | sed "s!/share/share/!/share/!"\`
-installman3dir=\`echo \$installman3dir | sed "s!/share/share/!/share/!"\`
-installman1dir=\`echo \$installman1dir | sed "s!/usr/man/!/usr/share/man/!"\`
-installman3dir=\`echo \$installman3dir | sed "s!/usr/man/!/usr/share/man/!"\`
-man1ext=1
-man3ext=3pm
-installprivlib=\`echo \$installprivlib | sed "s!\$prefix!\$installprefix!"\`
-installscript=\`echo \$installscript | sed "s!\$prefix!\$installprefix!"\`
-installsitelib=\`echo \$installsitelib | sed "s!\$prefix!\$installprefix!"\`
-installsitearch=\`echo \$installsitearch | sed "s!\$prefix!\$installprefix!"\`
-EOF
-sleep 10
-		sh Configure -des \
-			-Darchname="${myarch}" \
-			-Dcc="${CC:-gcc}" \
-			-Dprefix='/usr' \
-			-Dvendorprefix='/usr' \
-			-Dsiteprefix='/usr' \
-			-Dlocincpth=' ' \
-			-Doptimize="${CFLAGS}" \
-			-Duselargefiles \
-			-Dd_dosuid \
-			-Dd_semctl_semun \
-			-Dscriptdir=/usr/bin \
-			-Dman3ext='3pm' \
-			-Dcf_by='Gentoo' \
-			-Ud_csh \
-			${myconf} || die "Unable to configure"
-
-		MAKEOPTS="${MAKEOPTS} -j1" emake || die "Unable to make"
-
-		emake -i test CCDLFLAGS=
-	fi
-}
-
-src_install() {
-
-	export LC_ALL="C"
-
-	if [ "${PN}" = "libperl" ]
-	then
-		dolib.so ${WORKDIR}/${LIBPERL}
-		preplib
-	else
-		# Need to do this, else apps do not link to dynamic version of
-		# the library ...
-		local coredir="/usr/lib/perl5/${PV}/${myarch}${mythreading}/CORE"
-		dodir ${coredir}
-		dosym ../../../../${LIBPERL} ${coredir}/${LIBPERL}
-		dosym ../../../../${LIBPERL} ${coredir}/libperl.so.${PERLSLOT}
-		dosym ../../../../${LIBPERL} ${coredir}/libperl.so
-
-		# Fix for "stupid" modules and programs
-		dodir /usr/lib/perl5/site_perl/${PV}/${myarch}${mythreading}
-
-		make DESTDIR="${D}" \
-			INSTALLMAN1DIR="${D}/usr/share/man/man1" \
-			INSTALLMAN3DIR="${D}/usr/share/man/man3" \
-			install || die "Unable to make install"
-
-		cp -f utils/h2ph utils/h2ph_patched
-		epatch ${FILESDIR}/perl-5.8.0-RC2-special-h2ph-not-failing-on-machine_ansi_header.patch
-
-		LD_LIBRARY_PATH=. ./perl -Ilib utils/h2ph_patched \
-			-a -d ${D}/usr/lib/perl5/${PV}/${myarch}${mythreading} <<EOF
-asm/termios.h
-syscall.h
-syslimits.h
-syslog.h
-sys/ioctl.h
-sys/socket.h
-sys/time.h
-wait.h
-EOF
-
-		# This is to fix a missing c flag for backwards compat
-		for i in `find ${D}/usr/lib/perl5 -iname "Config.pm"`;do
-			sed -e "s:ccflags=':ccflags='-DPERL5 :" \
-			    -e "s:cppflags=':cppflags='-DPERL5 :" \
-				${i} > ${i}.new &&\
-				mv ${i}.new ${i} || die "Sed failed"
-		done
-
-		# A poor fix for the miniperl issues
-		dosed 's:./miniperl:/usr/bin/perl:' /usr/lib/perl5/${PV}/ExtUtils/xsubpp
-		fperms 0444 /usr/lib/perl5/${PV}/ExtUtils/xsubpp
-		dosed 's:./miniperl:/usr/bin/perl:' /usr/bin/xsubpp
-		fperms 0755 /usr/bin/xsubpp
-
-
-		./perl installman \
-			--man1dir="${D}/usr/share/man/man1" --man1ext='1' \
-			--man3dir="${D}/usr/share/man/man3" --man3ext='3'
-
-		# This removes ${D} from Config.pm and .packlist
-		for i in `find ${D} -iname "Config.pm"` `find ${D} -iname ".packlist"`;do
-			einfo "Removing ${D} from ${i}..."
-			sed -e "s:${D}::" ${i} > ${i}.new &&\
-				mv ${i}.new ${i} || die "Sed failed"
-		done
-	fi
-
-	dodoc Changes* Artistic Copying README Todo* AUTHORS
-
-	if [ "${PN}" = "perl" ]
-	then
-		# HTML Documentation
-		# We expect errors, warnings, and such with the following.
-
-		dodir /usr/share/doc/${PF}/html
-		./perl installhtml \
-			--podroot='.' \
-			--podpath='lib:ext:pod:vms' \
-			--recurse \
-			--htmldir="${D}/usr/share/doc/${PF}/html" \
-			--libpods='perlfunc:perlguts:perlvar:perlrun:perlop'
-	fi
-}
-
-pkg_postinst() {
-
-	# Make sure we do not have stale/invalid libperl.so 's ...
-	if [ -f "${ROOT}usr/lib/libperl.so" -a ! -L "${ROOT}usr/lib/libperl.so" ]
-	then
-		mv -f ${ROOT}usr/lib/libperl.so ${ROOT}usr/lib/libperl.so.old
-	fi
-
-	if [ "${PN}" = "libperl" ]
-	then
-		# Next bit is to try and setup the /usr/lib/libperl.so symlink
-		# properly ...
-		local libnumber="`ls -1 ${ROOT}usr/lib/libperl.so.?.* | grep -v '\.old' | wc -l`"
-		if [ "${libnumber}" -eq 1 ]
-		then
-			# Only this version of libperl is installed, so just link libperl.so
-			# to the *soname* version of it ...
-			ln -snf libperl.so.${PERLSLOT} ${ROOT}usr/lib/libperl.so
-		else
-			if [ -x "${ROOT}/usr/bin/perl" ]
-			then
-				# OK, we have more than one version .. first try to figure out
-				# if there are already a perl installed, if so, link libperl.so
-				# to that *soname* version of libperl.so ...
-				local perlversion="`${ROOT}/usr/bin/perl -V:version | cut -d\' -f2 | cut -d. -f1,2`"
-
-				cd ${ROOT}usr/lib
-				# Link libperl.so to the *soname* versioned lib ...
-				ln -snf `echo libperl.so.?.${perlversion} | cut -d. -f1,2,3` libperl.so
-			else
-				local x latest
-
-				# Nope, we are not so lucky ... try to figure out what version
-				# is the latest, and keep fingers crossed ...
-				for x in `ls -1 ${ROOT}usr/lib/libperl.so.?.*`
-				do
-					latest="${x}"
-				done
-
-				cd ${ROOT}usr/lib
-				# Link libperl.so to the *soname* versioned lib ...
-				ln -snf `echo ${latest##*/} | cut -d. -f1,2,3` libperl.so
-			fi
-		fi
-	else
-		local perllib="`readlink -f ${ROOT}usr/lib/libperl.so | sed -e 's:^.*/::'`"
-
-		# If we are installing perl, we need the /usr/lib/libperl.so symlink to
-		# point to the version of perl we are running, else builing something
-		# against libperl.so will break ...
-		if [ "${perllib}" != "${LIBPERL}" ]
-		then
-			# Delete stale symlinks
-			rm -f ${ROOT}usr/lib/libperl.so
-			rm -f ${ROOT}usr/lib/libperl.so.${PERLSLOT}
-			# Regenerate libperl.so.${PERLSLOT}
-			ln -snf ${LIBPERL} ${ROOT}usr/lib/libperl.so.${PERLSLOT}
-			# Create libperl.so (we use the *soname* versioned lib here ..)
-			ln -snf libperl.so.${PERLSLOT} ${ROOT}usr/lib/libperl.so
-		fi
-
-		if [ "${ROOT}" = "/" ]
-		then
-			ebegin "Converting C header files to the corresponding Perl format"
-			cd /usr/include; h2ph -r -l .
-		fi
-
-		eerror ""
-		eerror "If this is an upgrade to a perl 5.6.1 system,"
-		eerror "~OR~ an upgrade to a previous Gentoo release"
-		eerror "of perl 5.8.0, prior to -r8 "
-		eerror "you may need to recompile applications that"
-		eerror "were emerged against the old libperl.so"
-		eerror ""
-		eerror "${FILESDIR}/libperl_rebuilder "
-		eerror "is provided to assist with this. "
-		eerror "PLEASE DO NOT INTERRUPT THE RUNNING OF THIS SCRIPT."
-		eerror "Part of the rebuilding of applications compiled against "
-		eerror "your old libperl involves temporarily unmerging"
-		eerror "them - interruptions could leave you with unmerged"
-		eerror "packages before they can be remerged."
-		eerror ""
-		eerror "If you have run the rebuilder and a package still gives"
-		eerror "you trouble, and re-emerging it fails to correct"
-		eerror "the problem, please check http://bugs.gentoo.org/"
-		eerror "for more information or to report a bug."
-		eerror ""
-		sleep 5
-		eerror ""
-
-	fi
-}
-
-
diff --git a/dev-lang/perl/perl-5.8.2.ebuild b/dev-lang/perl/perl-5.8.2.ebuild
deleted file mode 100644
index 22bfa15add0e..000000000000
--- a/dev-lang/perl/perl-5.8.2.ebuild
+++ /dev/null
@@ -1,315 +0,0 @@
-# Copyright 1999-2004 Gentoo Technologies, Inc.
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/dev-lang/perl/perl-5.8.2.ebuild,v 1.4 2004/01/18 06:46:58 rac Exp $
-
-inherit eutils flag-o-matic
-
-# Perl has problems compiling with -Os in your flags
-replace-flags "-Os" "-O2"
-# This flag makes compiling crash in interesting ways
-filter-flags -malign-double
-
-# The slot of this binary compat version of libperl.so
-PERLSLOT="1"
-
-SHORT_PV="`echo ${PV} | cut -d. -f1,2`"
-DESCRIPTION="Larry Wall's Practical Extraction and Reporting Language"
-SAFE_VERSION="2.09"
-MY_P="perl-`echo $PV | sed 's/_rc/-RC/'`"
-S="${WORKDIR}/${MY_P}"
-SRC_URI="ftp://ftp.perl.org/pub/CPAN/src/${MY_P}.tar.gz"
-#ftp://ftp.perl.org/pub/CPAN/modules/by-module/DB_File/DB_File-${DB_FILE_VERSION}.tar.gz
-#ftp://ftp.perl.org/pub/CPAN/modules/by-module/Safe/Safe-${SAFE_VERSION}.tar.gz"
-HOMEPAGE="http://www.perl.org/"
-SLOT="0"
-LIBPERL="libperl.so.${PERLSLOT}.${SHORT_PV}"
-LICENSE="Artistic GPL-2"
-KEYWORDS="~x86 amd64 ~sparc ~ppc ~alpha ~mips ~hppa ~ia64"
-IUSE="berkdb doc gdbm threads"
-
-DEPEND="sys-apps/groff
-	berkdb? ( sys-libs/db )
-	gdbm? ( >=sys-libs/gdbm-1.8.0 )
-	>=sys-apps/portage-2.0.48-r4
-	>=sys-devel/libperl-${PV}
-	!<dev-perl/ExtUtils-MakeMaker-6.05-r6
-	!<dev-perl/File-Spec-0.84-r1
-	!<dev-perl/Test-Simple-0.47-r1"
-RDEPEND="berkdb? ( sys-libs/db )
-	gdbm? ( >=sys-libs/gdbm-1.8.0 )"
-
-pkg_setup() {
-	# I think this should rather be displayed if you *have* 'threads'
-	# in USE if it could break things ...
-	if [ -n "`use threads`" ]
-	then
-		ewarn ""
-		ewarn "PLEASE NOTE: You are compiling perl-5.8 with"
-		ewarn "threading enabled."
-		ewarn "Threading is not supported by all applications "
-		ewarn "that compile against perl. You use threading at "
-		ewarn "your own discretion. "
-		ewarn ""
-		sleep 10
-	else
-		ewarn ""
-		ewarn "PLEASE NOTE: If you want to compile perl-5.8 with"
-		ewarn "threading enabled , you must restart this emerge"
-		ewarn "with USE=threads emerge...."
-		ewarn "Threading is not supported by all applications "
-		ewarn "that compile against perl. You use threading at "
-		ewarn "your own discretion. "
-		ewarn ""
-	fi
-
-	if [ ! -f /usr/lib/${LIBPERL} ]
-	then
-		# Make sure we have libperl installed ...
-		eerror "Cannot find /usr/lib/${LIBPERL}!  Make sure that you"
-		eerror "have sys-libs/libperl installed properly ..."
-		die "Cannot find /usr/lib/${LIBPERL}!"
-	fi
-}
-
-src_unpack() {
-
-	unpack ${A}
-
-	# Get -lpthread linked before -lc.  This is needed
-	# when using glibc >= 2.3, or else runtime signal
-	# handling breaks.  Fixes bug #14380.
-	# <rac@gentoo.org> (14 Feb 2003)
-	# reinstated to try to avoid sdl segfaults 03.10.02
-	cd ${S}; epatch ${FILESDIR}/${P}-prelink-lpthread.patch
-
-	# Patch perldoc to not abort when it attempts to search
-	# nonexistent directories; fixes bug #16589.
-	# <rac@gentoo.org> (28 Feb 2003)
-
-	cd ${S}; epatch ${FILESDIR}/${P}-perldoc-emptydirs.patch
-
-	# this lays the groundwork for solving the issue of what happens
-	# when people (or ebuilds) install different versiosn of modules
-	# that are in the core, by rearranging the @INC directory to look
-	# site -> vendor -> core.
-	cd ${S}; epatch ${FILESDIR}/${P}-reorder-INC.patch
-}
-
-src_compile() {
-
-	export LC_ALL="C"
-	local myconf=""
-
-	if [ "`use threads`" ]
-	then
-		einfo "using threads"
-		mythreading="-multi"
-		myconf="-Dusethreads ${myconf}"
-		myarch="${CHOST%%-*}-linux-thread"
-	else
-		myarch="${CHOST%%-*}-linux"
-	fi
-
-	if [ "`use gdbm`" ]
-	then
-		myconf="${myconf} -Di_gdbm"
-	fi
-	if [ "`use berkdb`" ]
-	then
-		myconf="${myconf} -Di_db"
-
-		# ndbm.h is only provided by db1 (and perhaps by gdbm in
-		# error). an alternate approach here would be to check for the
-		# presence (or some string therein) of /usr/include/ndbm.h
-		# itself.
-
-		if has_version '=sys-libs/db-1*'
-		then
-			myconf="${myconf} -Di_ndbm"
-		else
-			myconf="${myconf} -Ui_ndbm"
-		fi
-	else
-		myconf="${myconf} -Ui_db -Ui_ndbm"
-	fi
-	if [ "`use mips`" ]
-	then
-		# this is needed because gcc 3.3-compiled kernels will hang
-		# the machine trying to run this test - check with `Kumba
-		# <rac@gentoo.org> 2003.06.26
-		myconf="${myconf} -Dd_u32align"
-	fi
-	if [ "`use sparc`" ]
-	then
-		myconf="${myconf} -Ud_longdbl"
-	fi
-	if [ "`use sparc64`" ]
-	then
-		myconf="${myconf} -Ud_longdbl"
-	fi
-
-	if [ "`use alpha`" -a "${CC}" == "ccc" ]
-	then
-		ewarn "Perl will not be built with berkdb support, use gcc if you needed it..."
-		myconf="${myconf} -Ui_db -Ui_ndbm"
-	fi
-
-	# These are temporary fixes. Need to edit the build so that that libraries created
-	# only get compiled with -fPIC, since they get linked into shared objects, they
-	# must be compiled with -fPIC.  Don't have time to parse through the build system
-	# at this time.
-	[ "${ARCH}" = "hppa" ] && append-flags -fPIC
-	[ "${ARCH}" = "amd64" ] && append-flags -fPIC
-
-	sh Configure -des \
-		-Darchname="${myarch}" \
-		-Dcc="${CC:-gcc}" \
-		-Dprefix='/usr' \
-		-Dvendorprefix='/usr' \
-		-Dsiteprefix='/usr' \
-		-Dlocincpth=' ' \
-		-Doptimize="${CFLAGS}" \
-		-Duselargefiles \
-		-Dd_dosuid \
-		-Dd_semctl_semun \
-		-Dscriptdir=/usr/bin \
-		-Dman3ext='3pm' \
-		-Dcf_by='Gentoo' \
-		-Ud_csh \
-		${myconf} || die "Unable to configure"
-
-	MAKEOPTS="${MAKEOPTS} -j1" emake || die "Unable to make"
-
-	emake -i test CCDLFLAGS=
-}
-
-src_install() {
-
-	export LC_ALL="C"
-
-	# Need to do this, else apps do not link to dynamic version of
-	# the library ...
-	local coredir="/usr/lib/perl5/${PV}/${myarch}${mythreading}/CORE"
-	dodir ${coredir}
-	dosym ../../../../${LIBPERL} ${coredir}/${LIBPERL}
-	dosym ../../../../${LIBPERL} ${coredir}/libperl.so.${PERLSLOT}
-	dosym ../../../../${LIBPERL} ${coredir}/libperl.so
-
-	# Fix for "stupid" modules and programs
-	dodir /usr/lib/perl5/site_perl/${PV}/${myarch}${mythreading}
-
-	make DESTDIR="${D}" \
-		INSTALLMAN1DIR="${D}/usr/share/man/man1" \
-		INSTALLMAN3DIR="${D}/usr/share/man/man3" \
-		install || die "Unable to make install"
-
-	cp -f utils/h2ph utils/h2ph_patched
-	epatch ${FILESDIR}/perl-5.8.0-RC2-special-h2ph-not-failing-on-machine_ansi_header.patch
-
-	LD_LIBRARY_PATH=. ./perl -Ilib utils/h2ph_patched \
-		-a -d ${D}/usr/lib/perl5/${PV}/${myarch}${mythreading} <<EOF
-asm/termios.h
-syscall.h
-syslimits.h
-syslog.h
-sys/ioctl.h
-sys/socket.h
-sys/time.h
-wait.h
-EOF
-
-	# This is to fix a missing c flag for backwards compat
-	for i in `find ${D}/usr/lib/perl5 -iname "Config.pm"`;do
-		sed -e "s:ccflags=':ccflags='-DPERL5 :" \
-		    -e "s:cppflags=':cppflags='-DPERL5 :" \
-			${i} > ${i}.new &&\
-			mv ${i}.new ${i} || die "Sed failed"
-	done
-
-	# A poor fix for the miniperl issues
-	dosed 's:./miniperl:/usr/bin/perl:' /usr/lib/perl5/${PV}/ExtUtils/xsubpp
-	fperms 0444 /usr/lib/perl5/${PV}/ExtUtils/xsubpp
-	dosed 's:./miniperl:/usr/bin/perl:' /usr/bin/xsubpp
-	fperms 0755 /usr/bin/xsubpp
-
-	./perl installman \
-		--destdir="${D}" --man1ext='1' --man3ext='3'
-
-	# This removes ${D} from Config.pm and .packlist
-	for i in `find ${D} -iname "Config.pm"` `find ${D} -iname ".packlist"`;do
-		einfo "Removing ${D} from ${i}..."
-		sed -e "s:${D}::" ${i} > ${i}.new &&\
-			mv ${i}.new ${i} || die "Sed failed"
-	done
-
-	dodoc Changes* Artistic Copying README Todo* AUTHORS
-
-	if [ -n "`use doc`" ]
-	then
-		# HTML Documentation
-		# We expect errors, warnings, and such with the following.
-
-		dodir /usr/share/doc/${PF}/html
-		./perl installhtml \
-			--podroot='.' \
-			--podpath='lib:ext:pod:vms' \
-			--recurse \
-			--htmldir="${D}/usr/share/doc/${PF}/html" \
-			--libpods='perlfunc:perlguts:perlvar:perlrun:perlop'
-	fi
-}
-
-pkg_postinst() {
-
-	# Make sure we do not have stale/invalid libperl.so 's ...
-	if [ -f "${ROOT}usr/lib/libperl.so" -a ! -L "${ROOT}usr/lib/libperl.so" ]
-	then
-		mv -f ${ROOT}usr/lib/libperl.so ${ROOT}usr/lib/libperl.so.old
-	fi
-
-	local perllib="`readlink -f ${ROOT}usr/lib/libperl.so | sed -e 's:^.*/::'`"
-
-	# If we are installing perl, we need the /usr/lib/libperl.so symlink to
-	# point to the version of perl we are running, else builing something
-	# against libperl.so will break ...
-	if [ "${perllib}" != "${LIBPERL}" ]
-	then
-		# Delete stale symlinks
-		rm -f ${ROOT}usr/lib/libperl.so
-		rm -f ${ROOT}usr/lib/libperl.so.${PERLSLOT}
-		# Regenerate libperl.so.${PERLSLOT}
-		ln -snf ${LIBPERL} ${ROOT}usr/lib/libperl.so.${PERLSLOT}
-		# Create libperl.so (we use the *soname* versioned lib here ..)
-		ln -snf libperl.so.${PERLSLOT} ${ROOT}usr/lib/libperl.so
-	fi
-
-	if [ "${ROOT}" = "/" ]
-	then
-		ebegin "Converting C header files to the corresponding Perl format"
-		cd /usr/include; find ./ -name "*.h" -type f -exec h2ph {} \;
-	fi
-
-	eerror ""
-	eerror "If this is an upgrade to a perl 5.6.1 system,"
-	eerror "~OR~ an upgrade to a previous Gentoo release"
-	eerror "of perl 5.8.0, prior to -r8 "
-	eerror "you may need to recompile applications that"
-	eerror "were emerged against the old libperl.so"
-	eerror ""
-	eerror "${FILESDIR}/libperl_rebuilder "
-	eerror "is provided to assist with this. "
-	eerror "PLEASE DO NOT INTERRUPT THE RUNNING OF THIS SCRIPT."
-	eerror "Part of the rebuilding of applications compiled against "
-	eerror "your old libperl involves temporarily unmerging"
-	eerror "them - interruptions could leave you with unmerged"
-	eerror "packages before they can be remerged."
-	eerror ""
-	eerror "If you have run the rebuilder and a package still gives"
-	eerror "you trouble, and re-emerging it fails to correct"
-	eerror "the problem, please check http://bugs.gentoo.org/"
-	eerror "for more information or to report a bug."
-	eerror ""
-	eerror ""
-}
-
-