# Copyright 1999-2021 Gentoo Authors # Distributed under the terms of the GNU General Public License v2 EAPI=7 inherit alternatives flag-o-matic toolchain-funcs multilib multiprocessing PATCH_VER=1 CROSS_VER=1.3.4 PATCH_BASE="perl-5.34.0-patches-${PATCH_VER}" PATCH_DEV=dilfridge DIST_AUTHOR=XSAWYERX # Greatest first, don't include yourself # Devel point-releases are not ABI-intercompatible, but stable point releases are # BIN_OLDVERSEN is contains only C-ABI-intercompatible versions PERL_BIN_OLDVERSEN="" # Yes we can. PERL_SINGLE_SLOT=y if [[ "${PV##*.}" == "9999" ]]; then DIST_VERSION=5.30.0 else DIST_VERSION="${PV/_rc/-RC}" fi SHORT_PV="${DIST_VERSION%.*}" # Even numbered major versions are ABI intercompatible # Odd numbered major versions are not if [[ $(( ${SHORT_PV#*.} % 2 )) == 1 ]]; then SUBSLOT="${DIST_VERSION%-RC*}" else SUBSLOT="${DIST_VERSION%.*}" fi # Used only in tar paths MY_P="perl-${DIST_VERSION}" # Used in library paths MY_PV="${DIST_VERSION%-RC*}" DESCRIPTION="Larry Wall's Practical Extraction and Report Language" SRC_URI=" mirror://cpan/src/5.0/${MY_P}.tar.xz mirror://cpan/authors/id/${DIST_AUTHOR:0:1}/${DIST_AUTHOR:0:2}/${DIST_AUTHOR}/${MY_P}.tar.xz https://github.com/gentoo-perl/perl-patchset/releases/download/${PATCH_BASE}/${PATCH_BASE}.tar.xz https://dev.gentoo.org/~${PATCH_DEV}/distfiles/${PATCH_BASE}.tar.xz https://github.com/arsv/perl-cross/releases/download/${CROSS_VER}/perl-cross-${CROSS_VER}.tar.gz " HOMEPAGE="https://www.perl.org/" LICENSE="|| ( Artistic GPL-1+ )" SLOT="0/${SUBSLOT}" if [[ "${PV##*.}" != "9999" ]] && [[ "${PV/rc//}" == "${PV}" ]] ; then #KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris" KEYWORDS="" fi IUSE="berkdb debug doc gdbm ithreads minimal" RDEPEND=" berkdb? ( sys-libs/db:= ) gdbm? ( >=sys-libs/gdbm-1.8.3:= ) app-arch/bzip2 sys-libs/zlib virtual/libcrypt:= " DEPEND="${RDEPEND}" BDEPEND="${RDEPEND}" PDEPEND=" !minimal? ( >=app-admin/perl-cleaner-2.5 >=virtual/perl-File-Temp-0.230.400-r2 >=virtual/perl-Data-Dumper-2.154.0 virtual/perl-Test-Harness ) " # bug 390719, bug 523624 # virtual/perl-Test-Harness is here for the bundled ExtUtils::MakeMaker S="${WORKDIR}/${MY_P}" dual_scripts() { src_remove_dual perl-core/Archive-Tar 2.360.0 ptar ptardiff ptargrep src_remove_dual perl-core/CPAN 2.270.0 cpan src_remove_dual perl-core/Digest-SHA 6.20.0 shasum src_remove_dual perl-core/Encode 3.60.0 enc2xs piconv src_remove_dual perl-core/ExtUtils-MakeMaker 7.440.0 instmodsh src_remove_dual perl-core/ExtUtils-ParseXS 3.400.0 xsubpp src_remove_dual perl-core/IO-Compress 2.93.0 zipdetails src_remove_dual perl-core/JSON-PP 4.40.0 json_pp src_remove_dual perl-core/Module-CoreList 5.202.101.23 corelist src_remove_dual perl-core/Pod-Checker 1.730.0 podchecker src_remove_dual perl-core/Pod-Perldoc 3.280.100 perldoc src_remove_dual perl-core/Pod-Usage 1.690.0 pod2usage src_remove_dual perl-core/Test-Harness 3.420.0 prove src_remove_dual perl-core/podlators 4.140.0 pod2man pod2text src_remove_dual_man perl-core/podlators 4.140.0 /usr/share/man/man1/perlpodstyle.1 } check_rebuild() { # Fresh install if [[ -z "${REPLACING_VERSIONS}" ]]; then return 0; # Major Upgrade # doesn't matter if there's multiple copies, it still needs a rebuild # if the string is anything other than "5.CURRENTMAJOR" elif [[ "${REPLACING_VERSIONS%.*}" != "${PV%.*}" ]]; then echo "" ewarn "UPDATE THE PERL MODULES:" ewarn "After updating dev-lang/perl the installed Perl modules" ewarn "have to be re-installed. In most cases, this is done automatically" ewarn "by the package manager, but subsequent steps are still recommended" ewarn "to ensure system consistency." ewarn ewarn "You should start with a depclean to remove any unused perl dependencies" ewarn "that may confuse portage in future. Regular depcleans are also encouraged" ewarn "as part of your regular update cycle, as that will keep perl upgrades working." ewarn "Recommended: emerge --depclean -va" ewarn ewarn "You should then call perl-cleaner to clean up any old files and trigger any" ewarn "remaining rebuilds portage may have missed." ewarn "Use: perl-cleaner --all" return 0; # Reinstall w/ USE Change elif ( use ithreads && ! has_version dev-lang/perl[ithreads] ) || \ ( ! use ithreads && has_version dev-lang/perl[ithreads] ) || \ ( use debug && ! has_version dev-lang/perl[debug] ) || \ ( ! use debug && has_version dev-lang/perl[debug] ) ; then echo "" ewarn "TOGGLED USE-FLAGS WARNING:" ewarn "You changed one of the use-flags ithreads or debug." ewarn "You must rebuild all perl-modules installed." ewarn "Use: perl-cleaner --modules ; perl-cleaner --force --libperl" fi } pkg_setup() { case ${CHOST} in *-freebsd*) osname="freebsd" ;; *-dragonfly*) osname="dragonfly" ;; *-netbsd*) osname="netbsd" ;; *-openbsd*) osname="openbsd" ;; *-darwin*) osname="darwin" ;; *-solaris*) osname="solaris" ;; *-cygwin*) osname="cygwin" ;; *) osname="linux" ;; esac myarch="${CHOST%%-*}-${osname}" if use debug ; then myarch+="-debug" fi if use ithreads ; then mythreading="-multi" myarch+="-thread" fi PRIV_BASE="/usr/$(get_libdir)/perl5" SITE_BASE="/usr/local/$(get_libdir)/perl5" VENDOR_BASE="/usr/$(get_libdir)/perl5/vendor_perl" LIBPERL="libperl$(get_libname ${MY_PV} )" # This ENV var tells perl to build with a directory like "5.30" # regardless of its patch version. This is for experts only # at this point. if [[ -z "${PERL_SINGLE_SLOT}" ]]; then PRIV_LIB="${PRIV_BASE}/${MY_PV}" ARCH_LIB="${PRIV_BASE}/${MY_PV}/${myarch}${mythreading}" SITE_LIB="${SITE_BASE}/${MY_PV}" SITE_ARCH="${SITE_BASE}/${MY_PV}/${myarch}${mythreading}" VENDOR_LIB="${VENDOR_BASE}/${MY_PV}" VENDOR_ARCH="${VENDOR_BASE}/${MY_PV}/${myarch}${mythreading}" else PRIV_LIB="${PRIV_BASE}/${SUBSLOT}" ARCH_LIB="${PRIV_BASE}/${SUBSLOT}/${myarch}${mythreading}" SITE_LIB="${SITE_BASE}/${SUBSLOT}" SITE_ARCH="${SITE_BASE}/${SUBSLOT}/${myarch}${mythreading}" VENDOR_LIB="${VENDOR_BASE}/${SUBSLOT}" VENDOR_ARCH="${VENDOR_BASE}/${SUBSLOT}/${myarch}${mythreading}" fi dual_scripts } src_remove_dual_file() { local i pkg ver pkg="$1" ver="$2" shift 2 case "${EBUILD_PHASE:-none}" in postinst|postrm) for i in "$@" ; do alternatives_auto_makesym "${i}" "${i}-[0-9]*" done ;; setup) for i in "$@" ; do if [[ -f ${EROOT}${i} && ! -h ${EROOT}${i} ]] ; then has_version ${pkg} && ewarn "You must reinstall ${pkg} !" break fi done ;; install) for i in "$@" ; do if ! [[ -f "${ED}"${i} ]] ; then ewarn "${i} does not exist!" continue fi mv "${ED}"${i}{,-${ver}-${P}} || die done ;; esac } src_remove_dual_man() { local i pkg ver ff pkg="$1" ver="$2" shift 2 case "${EBUILD_PHASE:-none}" in postinst|postrm) for i in "$@" ; do ff=`echo "${EROOT}${i%.[0-9]}-${ver}-${P}${i#${i%.[0-9]}}"*` ff=${ff##*${i#${i%.[0-9]}}} alternatives_auto_makesym "${i}${ff}" "${i%.[0-9]}-[0-9]*" done ;; install) for i in "$@" ; do if ! [[ -f "${ED}"${i} ]] ; then ewarn "${i} does not exist!" continue fi mv "${ED}"${i} "${ED}"${i%.[0-9]}-${ver}-${P}${i#${i%.[0-9]}} || die done ;; esac } src_remove_dual() { local i pkg ver pkg="$1" ver="$2" shift 2 for i in "$@" ; do src_remove_dual_file "${pkg}" "${ver}" "/usr/bin/${i}" src_remove_dual_man "${pkg}" "${ver}" "/usr/share/man/man1/${i}.1" done } src_prepare_perlcross() { cp -a ../perl-cross-${CROSS_VER}/* . || die # bug 604072 MAKEOPTS+=" -j1" export MAKEOPTS } src_prepare_dynamic() { ln -s ${LIBPERL} libperl$(get_libname ${SHORT_PV}) || die ln -s ${LIBPERL} libperl$(get_libname ) || die } # Copy a patch into the patch series # add_patch SRC_PATH DEST_NAME ['description'] ['bug'] ['bug'] # - description is optional, but recommended # - all arguments after descriptions are bug URLs add_patch() { local patchdir="${WORKDIR}/patches" local infodir="${WORKDIR}/patch-info" local src_name dest_name desc src_name="$1" dest_name="$2" desc="$3" shift; shift; shift; einfo "Adding ${dest_name} to patch bundle" cp "${src_name}" "${patchdir}/${dest_name}" || die "Couldn't copy ${src_name} to ${dest_name}" if [[ -n "${desc}" ]]; then printf "%s" "${desc}" > "${infodir}/${dest_name}.desc" || die "Couldn't write ${dest_name}.desc" fi if [[ $# -gt 0 ]]; then # Note: when $@ is more than one element, this emits a # line for each element printf "%s\n" "$@" > "${infodir}/${dest_name}.bugs" || die "Couldn't write ${dest_name}.bugs" fi } # Remove a patch using a glob expr # eg: # rm_patch *-darin-Use-CC* # rm_patch() { local patchdir="${WORKDIR}/patches" local expr="$1" local patch="$( cd "${patchdir}"; echo $expr )" einfo "Removing $patch ($expr) from patch bundle" if [[ -e "${patchdir}/${patch}" ]]; then rm -f "${patchdir}/${patch}" || die "Can't remove ${patch} ( $expr )" else ewarn "No ${expr} found in ${patchdir} to remove" fi } # Yes, this is a reasonable amount of code for something seemingly simple # but this is far easier to debug when things go wrong, and things went wrong # multiple times while I was getting the exact number of slashes right, which # requires circumnavigating both bash and sed escape mechanisms. c_escape_string() { local slash dquote slash='\' dquote='"' re_slash="${slash}${slash}" re_dquote="${slash}${dquote}" # Convert \ to \\, # " to \" echo "$1" |\ sed "s|${re_slash}|${re_slash}${re_slash}|g" |\ sed "s|${re_dquote}|${re_slash}${re_dquote}|g" } c_escape_file() { c_escape_string "$(cat "$1")" } apply_patchdir() { local patchdir="${WORKDIR}/patches" local infodir="${WORKDIR}/patch-info" local patchoutput="patchlevel-gentoo.h" # Inject Patch-Level info into description for patchlevel.h patch # to show in -V local patch_expr="*List-packaged-patches*" local patch="$( cd "${patchdir}"; echo $patch_expr )"; einfo "Injecting patch-level info into ${patch}.desc ( $patch_expr )" if [[ -e "${patchdir}/${patch}" ]]; then printf "List packaged patches for %s(%s) in patchlevel.h" "${PF}" "${PATCH_BASE}"\ >"${infodir}/${patch}.desc" || die "Can't rewrite ${patch}.desc" else eerror "No $patch_expr found in ${patchdir}" fi # Compute patch list to apply # different name other than PATCHES to stop default # reapplying it # Single depth is currently only supported, as artifacts can reside # from the old layout being multiple-directories, as well as it grossly # simplifying the patchlevel_gentoo.h generation. local PERL_PATCHES=($( find "${patchdir}" -maxdepth 1 -mindepth 1 -type f -printf "%f\n" |\ grep -E '[.](diff|patch)$' |\ sort -n )) for patch in "${PERL_PATCHES[@]}"; do eapply "${WORKDIR}"/patches/${patch} done einfo "Generating $patchoutput" # This code creates a header file, each iteration # creates one-or-more-lines for each entry found in PERL_PATCHES # and STDOUT is redirected to the .h file for patch in "${PERL_PATCHES[@]}"; do local desc_f="${infodir}/${patch}.desc" local bugs_f="${infodir}/${patch}.bugs" printf ',"%s"\n' "${patch}" if [[ ! -e "${desc_f}" ]]; then ewarn "No description provided for ${patch} (expected: ${desc_f} )" else local desc="$(c_escape_file "${desc_f}")" printf ',"- %s"\n' "${desc}" fi if [[ -e "${bugs_f}" ]]; then while read -d $'\n' -r line; do local esc_line="$(c_escape_string "${line}")" printf ',"- Bug: %s"\n' "${esc_line}" done <"${bugs_f}" fi done > "${S}/${patchoutput}" printf "%s\n" "${patchoutput}" >> "${S}/MANIFEST" } src_prepare() { local patchdir="${WORKDIR}/patches" # Prepare Patch dir with additional patches / remove unwanted patches # Inject bug/desc entries for perl -V if use hppa ; then # bug 634162 add_patch "${FILESDIR}/${PN}-5.26.2-hppa.patch" "100-5.26.2-hppa.patch"\ "Fix broken miniperl on hppa"\ "https://bugs.debian.org/869122" "https://bugs.gentoo.org/634162" fi if [[ ${CHOST} == *-solaris* ]] ; then # do NOT mess with nsl, on Solaris this is always necessary, # when -lsocket is used e.g. to get h_errno rm_patch "*-nsl-and-cl*" fi apply_patchdir tc-is-cross-compiler && src_prepare_perlcross tc-is-static-only || src_prepare_dynamic if use gdbm; then sed -i "s:INC => .*:INC => \"-I${EROOT}/usr/include/gdbm\":g" \ ext/NDBM_File/Makefile.PL || die fi # Use errno.h from prefix rather than from host system, bug #645804 if use prefix && [[ -e "${EPREFIX}"/usr/include/errno.h ]] ; then sed -i "/my..sysroot/s:'':'${EPREFIX}':" ext/Errno/Errno_pm.PL || die fi if [[ ${CHOST} == *-solaris* ]] ; then # set a soname, fix linking against just built libperl sed -i -e 's/netbsd\*/netbsd*|solaris*/' Makefile.SH || die fi if [[ ${CHOST} == *-darwin* ]] ; then # fix install_name (soname) not to reference $D sed -i -e '/install_name `pwd/s/`pwd`/\\$(shrpdir)/' Makefile.SH || die fi default } myconf() { # the myconf array is declared in src_configure myconf=( "${myconf[@]}" "$@" ) } # Outputs a list of versions which have been seen in any of the # primary perl @INC prefix paths, such as: # /usr/lib64/perl5/ # /usr/local/lib64/perl5/ # /usr/lib64/perl5/vendor_perl/ # # All values of NUMBER must be like "5.x.y", unless PERL_SUPPORT_SINGLE_SLOT # is enabled, where it will also allow numbers like "5.x" # # PERL_SUPPORT_SINGLE_SLOT should only be used to transition *away* from PERL_SINGLE_SLOT # if you used that. find_candidate_inc_versions() { local regex='.*/5[.][0-9]+[.][0-9]+$'; if [[ ! -z "${PERL_SUPPORT_SINGLE_SLOT}" || ! -z "${PERL_SINGLE_SLOT}" ]]; then regex='.*/5[.][0-9]+\([.][0-9]+\|\)$' fi local dirs=( "${EROOT}${PRIV_BASE}" "${EROOT}${SITE_BASE}" "${EROOT}${VENDOR_BASE}" ) for dir in "${dirs[@]}"; do if [[ ! -e "${dir}" ]]; then continue fi # Without access to readdir() on these dirs, find will not be able # to reveal any @INC directories inside them, and will subsequently prune # them from the built perl's @INC support, breaking our compatiblity options # entirely. if [[ ! -r "${dir}" || ! -x "${dir}" ]]; then eerror "Bad permissions on ${dir}, this will probably break things" eerror "Ensure ${dir} is +rx for at least uid=$EUID" eerror "Recommended permission is +rx for all" eerror "> chmod o+rx ${dir}" fi done einfo "Scanning for old @INC dirs matching '$regex' in: ${dirs[*]}" find "${dirs[@]}" -maxdepth 1 -mindepth 1 -type d -regex "${regex}" -printf "%f " 2>/dev/null } # Sort versions passed versiony-ly, remove self-version if present # dedup. Takes each version as an argument sanitize_inc_versions() { local vexclude="${DIST_VERSION%-RC}" if [[ ! -z "${PERL_SINGLE_SLOT}" ]]; then vexclude="${SUBSLOT}" fi einfo "Normalizing/Sorting candidate list: $*" einfo " to remove '${vexclude}'" # Note, general numeric sort has to be used # for the last component, or unique will convert # 5.30.0 + 5.30 into just 5.30 printf "%s\n" "$@" |\ grep -vxF "${vexclude}" |\ sort -u -nr -t'.' -k1,1rn -k2,2rn -k3,3rg } versions_to_inclist() { local oldv="${PERL_BIN_OLDVERSEN}" if [[ ! -z "${PERL_SINGLE_SLOT}" ]]; then oldv="${DIST_VERSION%-RC} ${PERL_BIN_OLDVERSEN}" fi for v; do has "${v}" ${oldv} && echo -n "${v}/${myarch}${mythreading}/ "; echo -n "${v}/ "; done } versions_to_gentoolibdirs() { local oldv="${PERL_BIN_OLDVERSEN}" local root local v if [[ ! -z "${PERL_SINGLE_SLOT}" ]]; then oldv="${DIST_VERSION%-RC} ${PERL_BIN_OLDVERSEN}" fi for v; do for root in "${PRIV_BASE}" "${VENDOR_BASE}" "${SITE_BASE}"; do local fullpath="${EROOT}${root}/${v}" if [[ -e "${fullpath}" ]]; then has "${v}" ${oldv} && printf "%s:" "${fullpath}/${myarch}${mythreading}"; printf "%s:" "${fullpath}" fi done done } src_configure() { declare -a myconf export LC_ALL="C" [[ ${COLUMNS:-1} -ge 1 ]] || unset COLUMNS # bug #394091 # Perl has problems compiling with -Os in your flags with glibc use elibc_uclibc || replace-flags "-Os" "-O2" # xlocale.h is going away in glibc-2.26, so it's counterproductive # if we use it and include it in CORE/perl.h ... Perl builds just # fine with glibc and locale.h only. # However, the darwin prefix people have no locale.h ... use elibc_glibc && myconf -Ui_xlocale # This flag makes compiling crash in interesting ways filter-flags "-malign-double" # Generic LTO broken since 5.28, triggers EUMM failures filter-flags "-flto" use sparc && myconf -Ud_longdbl export BUILD_BZIP2=0 export BZIP2_INCLUDE=${EROOT}/usr/include export BZIP2_LIB=${EROOT}/usr/$(get_libdir) export BUILD_ZLIB=False export ZLIB_INCLUDE=${EROOT}/usr/include export ZLIB_LIB=${EROOT}/usr/$(get_libdir) # allow either gdbm to provide ndbm (in ) or db1 myndbm='U' mygdbm='U' mydb='U' if use gdbm ; then mygdbm='D' if use berkdb ; then myndbm='D' fi fi if use berkdb ; then mydb='D' has_version '=sys-libs/db-1*' && myndbm='D' fi myconf "-${myndbm}i_ndbm" "-${mygdbm}i_gdbm" "-${mydb}i_db" if use alpha && [[ "$(tc-getCC)" = "ccc" ]] ; then ewarn "Perl will not be built with berkdb support, use gcc if you needed it..." myconf -Ui_db -Ui_ndbm fi use ithreads && myconf -Dusethreads if use debug ; then append-cflags "-g" myconf -DDEBUGGING elif [[ ${CFLAGS} == *-g* ]] ; then myconf -DDEBUGGING=-g else myconf -DDEBUGGING=none fi # Autodiscover all old version directories, some of them will even be newer # if you downgrade if [[ -z ${PERL_OLDVERSEN} ]]; then PERL_OLDVERSEN="$( find_candidate_inc_versions )" fi # Fixup versions, removing self match, fixing order and dupes PERL_OLDVERSEN="$( sanitize_inc_versions ${PERL_OLDVERSEN} )" # Experts who want a "Pure" install can set PERL_OLDVERSEN to an empty string if [[ -n "${PERL_OLDVERSEN// }" ]]; then local inclist="$( versions_to_inclist ${PERL_OLDVERSEN} )" einfo "This version of perl may partially support modules previously" einfo "installed in any of the following paths:" for incpath in ${inclist}; do [[ -e "${EROOT}${VENDOR_BASE}/${incpath}" ]] && einfo " ${EROOT}${VENDOR_BASE}/${incpath}" [[ -e "${EROOT}${PRIV_BASE}/${incpath}" ]] && einfo " ${EROOT}${PRIV_BASE}/${incpath}" [[ -e "${EROOT}${SITE_BASE}/${incpath}" ]] && einfo " ${EROOT}${SITE_BASE}/${incpath}" done einfo "This is a temporary measure and you should aim to cleanup these paths" einfo "via world updates and perl-cleaner" # myconf -Dinc_version_list="${inclist}" myconf -Dgentoolibdirs="$( versions_to_gentoolibdirs ${PERL_OLDVERSEN} )" fi [[ ${ELIBC} == "FreeBSD" ]] && myconf "-Dlibc=/usr/$(get_libdir)/libc.a" # Make sure we can do the final link #523730, need to set deployment # target to override hardcoded 10.3 which breaks on modern OSX [[ ${CHOST} == *-darwin* ]] && \ myconf "-Dld=env MACOSX_DEPLOYMENT_TARGET=${MACOSX_DEPLOYMENT_TARGET} $(tc-getCC)" # Older macOS with non-Apple GCC chokes on inline in system headers # using c89 mode as injected by cflags.SH [[ ${CHOST} == *-darwin* && ${CHOST##*darwin} -le 9 ]] && tc-is-gcc && \ append-cflags -Dinline=__inline__ # flock on 32-bit sparc Solaris is broken, fall back to fcntl [[ ${CHOST} == sparc-*-solaris* ]] && \ myconf -Ud_flock # Prefix: the host system needs not to follow Gentoo multilib stuff, and in # Prefix itself we don't do multilib either, so make sure perl can find # something compatible. if use prefix ; then # Set a hook to check for each detected library whether it actually works. export libscheck=" ( echo 'main(){}' > '${T}'/conftest.c && $(tc-getCC) -o '${T}'/conftest '${T}'/conftest.c -l\$thislib >/dev/null 2>/dev/null ) || xxx=/dev/null" # Use all host paths that might contain useful stuff, the hook above will filter out bad choices. local paths="/lib/*-linux-gnu /usr/lib/*-linux-gnu /lib64 /lib/64 /usr/lib64 /usr/lib/64 /lib32 /usr/lib32 /lib /usr/lib" myconf "-Dlibpth=${EPREFIX}/$(get_libdir) ${EPREFIX}/usr/$(get_libdir) ${paths}" elif [[ $(get_libdir) != "lib" ]] ; then # We need to use " and not ', as the written config.sh use ' ... myconf "-Dlibpth=/usr/local/$(get_libdir) /$(get_libdir) /usr/$(get_libdir)" fi # don't try building ODBM, bug #354453 disabled_extensions="ODBM_File" if ! use gdbm ; then # workaround for bug #157774: don't try building GDBM related stuff with USE="-gdbm" disabled_extensions="${disabled_extensions} GDBM_File NDBM_File" fi myconf -Dnoextensions="${disabled_extensions}" [[ "${PV##*.}" == "9999" ]] && myconf -Dusedevel -Uversiononly [[ -n "${EXTRA_ECONF}" ]] && ewarn During Perl build, EXTRA_ECONF=${EXTRA_ECONF} # allow fiddling via EXTRA_ECONF, bug 558070 eval "local -a EXTRA_ECONF=(${EXTRA_ECONF})" # setting -Dld= to tc-getLD breaks perl and all perl things # https://github.com/Perl/perl5/issues/17791#issuecomment-630145202 myconf \ -Duseshrplib \ -Darchname="${myarch}" \ -Dcc="$(tc-getCC)" \ -Dar="$(tc-getAR)" \ -Dnm="$(tc-getNM)" \ -Dcpp="$(tc-getCPP)" \ -Dranlib="$(tc-getRANLIB)" \ -Doptimize="${CFLAGS}" \ -Dldflags="${LDFLAGS}" \ -Dprefix="${EPREFIX}"'/usr' \ -Dsiteprefix="${EPREFIX}"'/usr/local' \ -Dvendorprefix="${EPREFIX}"'/usr' \ -Dscriptdir="${EPREFIX}"'/usr/bin' \ -Dprivlib="${EPREFIX}${PRIV_LIB}" \ -Darchlib="${EPREFIX}${ARCH_LIB}" \ -Dsitelib="${EPREFIX}${SITE_LIB}" \ -Dsitearch="${EPREFIX}${SITE_ARCH}" \ -Dvendorlib="${EPREFIX}${VENDOR_LIB}" \ -Dvendorarch="${EPREFIX}${VENDOR_ARCH}" \ -Dman1dir="${EPREFIX}"/usr/share/man/man1 \ -Dman3dir="${EPREFIX}"/usr/share/man/man3 \ -Dsiteman1dir="${EPREFIX}"/usr/local/man/man1 \ -Dsiteman3dir="${EPREFIX}"/usr/local/man/man3 \ -Dvendorman1dir="${EPREFIX}"/usr/share/man/man1 \ -Dvendorman3dir="${EPREFIX}"/usr/share/man/man3 \ -Dman1ext='1' \ -Dman3ext='3pm' \ -Dlibperl="${LIBPERL}" \ -Dlocincpth="${EPREFIX}"'/usr/include ' \ -Dglibpth="${EPREFIX}/$(get_libdir) ${EPREFIX}/usr/$(get_libdir)"' ' \ -Duselargefiles \ -Dd_semctl_semun \ -Dcf_by='Gentoo' \ -Dmyhostname='localhost' \ -Dperladmin='root@localhost' \ -Ud_csh \ -Dsh="${EPREFIX}"/bin/sh \ -Dtargetsh="${EPREFIX}"/bin/sh \ -Uusenm \ "${myconf[@]}" \ "${EXTRA_ECONF[@]}" if tc-is-cross-compiler; then ./configure \ --target="${CHOST}" \ --build="${CBUILD}" \ -Dinstallprefix='' \ -Dinstallusrbinperl='undef' \ -Dusevendorprefix='define' \ "${myconf[@]}" \ || die "Unable to configure" else sh Configure \ -des \ -Dinstallprefix="${EPREFIX}"'/usr' \ -Dinstallusrbinperl='n' \ "${myconf[@]}" \ || die "Unable to configure" fi } src_test() { export NO_GENTOO_NETWORK_TESTS=1; export GENTOO_ASSUME_SANDBOXED="${GENTOO_ASSUME_SANDBOXED:-1}" export GENTOO_NO_PORTING_TESTS="${GENTOO_NO_PORTING_TESTS:-1}" if [[ ${EUID} == 0 ]] ; then ewarn "Test fails with a sandbox error (#328793) if run as root. Skipping tests..." return 0 fi use elibc_uclibc && export MAKEOPTS+=" -j1" TEST_JOBS="$(makeopts_jobs)" make test_harness || die "test failed" } src_install() { local i local coredir="${ARCH_LIB}/CORE" emake DESTDIR="${D}" install rm -f "${ED}/usr/bin/perl${MY_PV}" ln -s perl "${ED}"/usr/bin/perl${MY_PV} || die if ! tc-is-static-only ; then dolib.so "${ED}"${coredir}/${LIBPERL} rm -f "${ED}"${coredir}/${LIBPERL} ln -sf ${LIBPERL} "${ED}"/usr/$(get_libdir)/libperl$(get_libname ${SHORT_PV}) || die ln -sf ${LIBPERL} "${ED}"/usr/$(get_libdir)/libperl$(get_libname) || die ln -sf ../../../../${LIBPERL} "${ED}"${coredir}/${LIBPERL} || die ln -sf ../../../../${LIBPERL} "${ED}"${coredir}/libperl$(get_libname ${SHORT_PV}) || die ln -sf ../../../../${LIBPERL} "${ED}"${coredir}/libperl$(get_libname) || die fi rm -rf "${ED}"/usr/share/man/man3 || die "Unable to remove module man pages" # This removes ${D} from Config.pm for i in $(find "${D}" -iname "Config.pm" ) ; do einfo "Removing ${D} from ${i}..." sed -i -e "s:${D}::" "${i}" || die "Sed failed" done dodoc Changes* README AUTHORS if use doc ; then # HTML Documentation # We expect errors, warnings, and such with the following. dodir /usr/share/doc/${PF}/html LD_LIBRARY_PATH=. ./perl installhtml \ --podroot='.' \ --podpath='lib:ext:pod:vms' \ --recurse \ --htmldir="${ED}/usr/share/doc/${PF}/html" fi [[ -d ${ED}/usr/local ]] && rm -r "${ED}"/usr/local dual_scripts } pkg_preinst() { check_rebuild } pkg_postinst() { dual_scripts if [[ "${ROOT}" = "/" ]] ; then local INC DIR file INC=$(perl -e 'for $line (@INC) { next if $line eq "."; next if $line =~ m/'${SHORT_PV}'|etc|local|perl$/; print "$line\n" }') einfo "Removing old .ph files" for DIR in ${INC} ; do if [[ -d "${DIR}" ]] ; then for file in $(find "${DIR}" -name "*.ph" -type f ) ; do rm -f "${file}" einfo "<< ${file}" done fi done # Silently remove the now empty dirs for DIR in ${INC} ; do if [[ -d "${DIR}" ]] ; then find "${DIR}" -depth -type d -print0 | xargs -0 -r rmdir &> /dev/null fi done fi } pkg_postrm() { dual_scripts }