diff --git a/Documentation/sysctl/fs.txt b/Documentation/sysctl/fs.txt index 35e17f748ca7..af5859b2d0f9 100644 --- a/Documentation/sysctl/fs.txt +++ b/Documentation/sysctl/fs.txt @@ -34,7 +34,9 @@ Currently, these files are in /proc/sys/fs: - overflowgid - pipe-user-pages-hard - pipe-user-pages-soft +- protected_fifos - protected_hardlinks +- protected_regular - protected_symlinks - suid_dumpable - super-max @@ -182,6 +184,24 @@ applied. ============================================================== +protected_fifos: + +The intent of this protection is to avoid unintentional writes to +an attacker-controlled FIFO, where a program expected to create a regular +file. + +When set to "0", writing to FIFOs is unrestricted. + +When set to "1" don't allow O_CREAT open on FIFOs that we don't own +in world writable sticky directories, unless they are owned by the +owner of the directory. + +When set to "2" it also applies to group writable sticky directories. + +This protection is based on the restrictions in Openwall. + +============================================================== + protected_hardlinks: A long-standing class of security issues is the hardlink-based @@ -202,6 +222,22 @@ This protection is based on the restrictions in Openwall and grsecurity. ============================================================== +protected_regular: + +This protection is similar to protected_fifos, but it +avoids writes to an attacker-controlled regular file, where a program +expected to create one. + +When set to "0", writing to regular files is unrestricted. + +When set to "1" don't allow O_CREAT open on regular files that we +don't own in world writable sticky directories, unless they are +owned by the owner of the directory. + +When set to "2" it also applies to group writable sticky directories. + +============================================================== + protected_symlinks: A long-standing class of security issues is the symlink-based diff --git a/MAINTAINERS b/MAINTAINERS index ab65bbecb159..f4d4a5544dc1 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -10135,6 +10135,7 @@ F: arch/alpha/kernel/srm_env.c STABLE BRANCH M: Greg Kroah-Hartman +M: Sasha Levin L: stable@vger.kernel.org S: Supported F: Documentation/stable_kernel_rules.txt diff --git a/Makefile b/Makefile index 441a760dc5a4..64521458d35e 100644 --- a/Makefile +++ b/Makefile @@ -1,6 +1,6 @@ VERSION = 4 PATCHLEVEL = 4 -SUBLEVEL = 165 +SUBLEVEL = 166 EXTRAVERSION = NAME = Blurry Fish Butt diff --git a/arch/arm64/Makefile b/arch/arm64/Makefile index c10bb98144b0..fb4ac87fc398 100644 --- a/arch/arm64/Makefile +++ b/arch/arm64/Makefile @@ -10,7 +10,7 @@ # # Copyright (C) 1995-2001 by Russell King -LDFLAGS_vmlinux :=-p --no-undefined -X +LDFLAGS_vmlinux :=--no-undefined -X CPPFLAGS_vmlinux.lds = -DTEXT_OFFSET=$(TEXT_OFFSET) OBJCOPYFLAGS :=-O binary -R .note -R .note.gnu.build-id -R .comment -S GZFLAGS :=-9 diff --git a/arch/powerpc/kvm/trace.h b/arch/powerpc/kvm/trace.h index 2e0e67ef3544..e8cedf32345a 100644 --- a/arch/powerpc/kvm/trace.h +++ b/arch/powerpc/kvm/trace.h @@ -5,8 +5,6 @@ #undef TRACE_SYSTEM #define TRACE_SYSTEM kvm -#define TRACE_INCLUDE_PATH . -#define TRACE_INCLUDE_FILE trace /* * Tracepoint for guest mode entry. @@ -119,4 +117,10 @@ TRACE_EVENT(kvm_check_requests, #endif /* _TRACE_KVM_H */ /* This part must be outside protection */ +#undef TRACE_INCLUDE_PATH +#undef TRACE_INCLUDE_FILE + +#define TRACE_INCLUDE_PATH . +#define TRACE_INCLUDE_FILE trace + #include diff --git a/arch/powerpc/kvm/trace_booke.h b/arch/powerpc/kvm/trace_booke.h index 7ec534d1db9f..7eadbf449a1f 100644 --- a/arch/powerpc/kvm/trace_booke.h +++ b/arch/powerpc/kvm/trace_booke.h @@ -5,8 +5,6 @@ #undef TRACE_SYSTEM #define TRACE_SYSTEM kvm_booke -#define TRACE_INCLUDE_PATH . -#define TRACE_INCLUDE_FILE trace_booke #define kvm_trace_symbol_exit \ {0, "CRITICAL"}, \ @@ -217,4 +215,11 @@ TRACE_EVENT(kvm_booke_queue_irqprio, #endif /* This part must be outside protection */ + +#undef TRACE_INCLUDE_PATH +#undef TRACE_INCLUDE_FILE + +#define TRACE_INCLUDE_PATH . +#define TRACE_INCLUDE_FILE trace_booke + #include diff --git a/arch/powerpc/kvm/trace_hv.h b/arch/powerpc/kvm/trace_hv.h index 33d9daff5783..d1bfe017d751 100644 --- a/arch/powerpc/kvm/trace_hv.h +++ b/arch/powerpc/kvm/trace_hv.h @@ -8,8 +8,6 @@ #undef TRACE_SYSTEM #define TRACE_SYSTEM kvm_hv -#define TRACE_INCLUDE_PATH . -#define TRACE_INCLUDE_FILE trace_hv #define kvm_trace_symbol_hcall \ {H_REMOVE, "H_REMOVE"}, \ @@ -474,4 +472,11 @@ TRACE_EVENT(kvmppc_run_vcpu_exit, #endif /* _TRACE_KVM_HV_H */ /* This part must be outside protection */ + +#undef TRACE_INCLUDE_PATH +#undef TRACE_INCLUDE_FILE + +#define TRACE_INCLUDE_PATH . +#define TRACE_INCLUDE_FILE trace_hv + #include diff --git a/arch/powerpc/kvm/trace_pr.h b/arch/powerpc/kvm/trace_pr.h index 810507cb688a..1e40aa2aa5af 100644 --- a/arch/powerpc/kvm/trace_pr.h +++ b/arch/powerpc/kvm/trace_pr.h @@ -7,8 +7,6 @@ #undef TRACE_SYSTEM #define TRACE_SYSTEM kvm_pr -#define TRACE_INCLUDE_PATH . -#define TRACE_INCLUDE_FILE trace_pr TRACE_EVENT(kvm_book3s_reenter, TP_PROTO(int r, struct kvm_vcpu *vcpu), @@ -271,4 +269,11 @@ TRACE_EVENT(kvm_unmap_hva, #endif /* _TRACE_KVM_H */ /* This part must be outside protection */ + +#undef TRACE_INCLUDE_PATH +#undef TRACE_INCLUDE_FILE + +#define TRACE_INCLUDE_PATH . +#define TRACE_INCLUDE_FILE trace_pr + #include diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c index 3c4faa4c2742..bb3df222ae71 100644 --- a/arch/powerpc/mm/numa.c +++ b/arch/powerpc/mm/numa.c @@ -1319,7 +1319,7 @@ static long vphn_get_associativity(unsigned long cpu, switch (rc) { case H_FUNCTION: - printk(KERN_INFO + printk_once(KERN_INFO "VPHN is not supported. Disabling polling...\n"); stop_topology_update(); break; diff --git a/arch/s390/mm/pgtable.c b/arch/s390/mm/pgtable.c index 05ae254f84cf..1866b6a5171a 100644 --- a/arch/s390/mm/pgtable.c +++ b/arch/s390/mm/pgtable.c @@ -637,6 +637,8 @@ void gmap_discard(struct gmap *gmap, unsigned long from, unsigned long to) vmaddr |= gaddr & ~PMD_MASK; /* Find vma in the parent mm */ vma = find_vma(gmap->mm, vmaddr); + if (!vma) + continue; size = min(to - gaddr, PMD_SIZE - (gaddr & ~PMD_MASK)); zap_page_range(vma, vmaddr, size, NULL); } diff --git a/arch/x86/entry/entry_64.S b/arch/x86/entry/entry_64.S index 8be48b1d7596..375ed605c83d 100644 --- a/arch/x86/entry/entry_64.S +++ b/arch/x86/entry/entry_64.S @@ -856,7 +856,7 @@ ENTRY(\sym) call \do_sym - jmp error_exit /* %ebx: no swapgs flag */ + jmp error_exit .endif END(\sym) .endm @@ -1118,7 +1118,6 @@ END(paranoid_exit) /* * Save all registers in pt_regs, and switch gs if needed. - * Return: EBX=0: came from user mode; EBX=1: otherwise */ ENTRY(error_entry) cld @@ -1131,7 +1130,6 @@ ENTRY(error_entry) * the kernel CR3 here. */ SWITCH_KERNEL_CR3 - xorl %ebx, %ebx testb $3, CS+8(%rsp) jz .Lerror_kernelspace @@ -1165,7 +1163,6 @@ ENTRY(error_entry) * for these here too. */ .Lerror_kernelspace: - incl %ebx leaq native_irq_return_iret(%rip), %rcx cmpq %rcx, RIP+8(%rsp) je .Lerror_bad_iret @@ -1196,28 +1193,19 @@ ENTRY(error_entry) /* * Pretend that the exception came from user mode: set up pt_regs - * as if we faulted immediately after IRET and clear EBX so that - * error_exit knows that we will be returning to user mode. + * as if we faulted immediately after IRET. */ mov %rsp, %rdi call fixup_bad_iret mov %rax, %rsp - decl %ebx jmp .Lerror_entry_from_usermode_after_swapgs END(error_entry) - -/* - * On entry, EBS is a "return to kernel mode" flag: - * 1: already in kernel mode, don't need SWAPGS - * 0: user gsbase is loaded, we need SWAPGS and standard preparation for return to usermode - */ ENTRY(error_exit) - movl %ebx, %eax DISABLE_INTERRUPTS(CLBR_NONE) TRACE_IRQS_OFF - testl %eax, %eax - jnz retint_kernel + testb $3, CS(%rsp) + jz retint_kernel jmp retint_user END(error_exit) diff --git a/drivers/cpufreq/imx6q-cpufreq.c b/drivers/cpufreq/imx6q-cpufreq.c index ef1fa8145419..fa86946d12aa 100644 --- a/drivers/cpufreq/imx6q-cpufreq.c +++ b/drivers/cpufreq/imx6q-cpufreq.c @@ -130,8 +130,13 @@ static int imx6q_set_target(struct cpufreq_policy *policy, unsigned int index) /* Ensure the arm clock divider is what we expect */ ret = clk_set_rate(arm_clk, new_freq * 1000); if (ret) { + int ret1; + dev_err(cpu_dev, "failed to set clock rate: %d\n", ret); - regulator_set_voltage_tol(arm_reg, volt_old, 0); + ret1 = regulator_set_voltage_tol(arm_reg, volt_old, 0); + if (ret1) + dev_warn(cpu_dev, + "failed to restore vddarm voltage: %d\n", ret1); return ret; } diff --git a/drivers/gpu/drm/ast/ast_drv.c b/drivers/gpu/drm/ast/ast_drv.c index 9a32d9dfdd26..011700262824 100644 --- a/drivers/gpu/drm/ast/ast_drv.c +++ b/drivers/gpu/drm/ast/ast_drv.c @@ -60,8 +60,29 @@ static const struct pci_device_id pciidlist[] = { MODULE_DEVICE_TABLE(pci, pciidlist); +static void ast_kick_out_firmware_fb(struct pci_dev *pdev) +{ + struct apertures_struct *ap; + bool primary = false; + + ap = alloc_apertures(1); + if (!ap) + return; + + ap->ranges[0].base = pci_resource_start(pdev, 0); + ap->ranges[0].size = pci_resource_len(pdev, 0); + +#ifdef CONFIG_X86 + primary = pdev->resource[PCI_ROM_RESOURCE].flags & IORESOURCE_ROM_SHADOW; +#endif + remove_conflicting_framebuffers(ap, "astdrmfb", primary); + kfree(ap); +} + static int ast_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) { + ast_kick_out_firmware_fb(pdev); + return drm_get_pci_dev(pdev, ent, &driver); } diff --git a/drivers/gpu/drm/ast/ast_mode.c b/drivers/gpu/drm/ast/ast_mode.c index 69d19f3304a5..21085f669e21 100644 --- a/drivers/gpu/drm/ast/ast_mode.c +++ b/drivers/gpu/drm/ast/ast_mode.c @@ -552,6 +552,7 @@ static int ast_crtc_do_set_base(struct drm_crtc *crtc, } ast_bo_unreserve(bo); + ast_set_offset_reg(crtc); ast_set_start_address_crt1(crtc, (u32)gpu_addr); return 0; @@ -1249,7 +1250,7 @@ static int ast_cursor_move(struct drm_crtc *crtc, ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0xc7, ((y >> 8) & 0x07)); /* dummy write to fire HWC */ - ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xCB, 0xFF, 0x00); + ast_show_cursor(crtc); return 0; } diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c index 3258baf3282e..2e52015634f9 100644 --- a/drivers/input/joystick/xpad.c +++ b/drivers/input/joystick/xpad.c @@ -76,18 +76,23 @@ */ #include +#include +#include #include #include #include #include +#include #define DRIVER_AUTHOR "Marko Friedemann " #define DRIVER_DESC "X-Box pad driver" -#define XPAD_PKT_LEN 32 +#define XPAD_PKT_LEN 64 -/* xbox d-pads should map to buttons, as is required for DDR pads - but we map them to axes when possible to simplify things */ +/* + * xbox d-pads should map to buttons, as is required for DDR pads + * but we map them to axes when possible to simplify things + */ #define MAP_DPAD_TO_BUTTONS (1 << 0) #define MAP_TRIGGERS_TO_BUTTONS (1 << 1) #define MAP_STICKS_TO_NULL (1 << 2) @@ -112,6 +117,10 @@ static bool sticks_to_null; module_param(sticks_to_null, bool, S_IRUGO); MODULE_PARM_DESC(sticks_to_null, "Do not map sticks at all for unknown pads"); +static bool auto_poweroff = true; +module_param(auto_poweroff, bool, S_IWUSR | S_IRUGO); +MODULE_PARM_DESC(auto_poweroff, "Power off wireless controllers on suspend"); + static const struct xpad_device { u16 idVendor; u16 idProduct; @@ -119,43 +128,77 @@ static const struct xpad_device { u8 mapping; u8 xtype; } xpad_device[] = { + { 0x0079, 0x18d4, "GPD Win 2 X-Box Controller", 0, XTYPE_XBOX360 }, + { 0x044f, 0x0f00, "Thrustmaster Wheel", 0, XTYPE_XBOX }, + { 0x044f, 0x0f03, "Thrustmaster Wheel", 0, XTYPE_XBOX }, + { 0x044f, 0x0f07, "Thrustmaster, Inc. Controller", 0, XTYPE_XBOX }, + { 0x044f, 0x0f10, "Thrustmaster Modena GT Wheel", 0, XTYPE_XBOX }, + { 0x044f, 0xb326, "Thrustmaster Gamepad GP XID", 0, XTYPE_XBOX360 }, { 0x045e, 0x0202, "Microsoft X-Box pad v1 (US)", 0, XTYPE_XBOX }, { 0x045e, 0x0285, "Microsoft X-Box pad (Japan)", 0, XTYPE_XBOX }, { 0x045e, 0x0287, "Microsoft Xbox Controller S", 0, XTYPE_XBOX }, + { 0x045e, 0x0288, "Microsoft Xbox Controller S v2", 0, XTYPE_XBOX }, { 0x045e, 0x0289, "Microsoft X-Box pad v2 (US)", 0, XTYPE_XBOX }, { 0x045e, 0x028e, "Microsoft X-Box 360 pad", 0, XTYPE_XBOX360 }, - { 0x045e, 0x02d1, "Microsoft X-Box One pad", 0, XTYPE_XBOXONE }, - { 0x045e, 0x02dd, "Microsoft X-Box One pad (Covert Forces)", 0, XTYPE_XBOXONE }, + { 0x045e, 0x028f, "Microsoft X-Box 360 pad v2", 0, XTYPE_XBOX360 }, { 0x045e, 0x0291, "Xbox 360 Wireless Receiver (XBOX)", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360W }, + { 0x045e, 0x02d1, "Microsoft X-Box One pad", 0, XTYPE_XBOXONE }, + { 0x045e, 0x02dd, "Microsoft X-Box One pad (Firmware 2015)", 0, XTYPE_XBOXONE }, + { 0x045e, 0x02e3, "Microsoft X-Box One Elite pad", 0, XTYPE_XBOXONE }, + { 0x045e, 0x02ea, "Microsoft X-Box One S pad", 0, XTYPE_XBOXONE }, { 0x045e, 0x0719, "Xbox 360 Wireless Receiver", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360W }, - { 0x044f, 0x0f07, "Thrustmaster, Inc. Controller", 0, XTYPE_XBOX }, - { 0x044f, 0xb326, "Thrustmaster Gamepad GP XID", 0, XTYPE_XBOX360 }, { 0x046d, 0xc21d, "Logitech Gamepad F310", 0, XTYPE_XBOX360 }, { 0x046d, 0xc21e, "Logitech Gamepad F510", 0, XTYPE_XBOX360 }, { 0x046d, 0xc21f, "Logitech Gamepad F710", 0, XTYPE_XBOX360 }, { 0x046d, 0xc242, "Logitech Chillstream Controller", 0, XTYPE_XBOX360 }, { 0x046d, 0xca84, "Logitech Xbox Cordless Controller", 0, XTYPE_XBOX }, { 0x046d, 0xca88, "Logitech Compact Controller for Xbox", 0, XTYPE_XBOX }, + { 0x046d, 0xca8a, "Logitech Precision Vibration Feedback Wheel", 0, XTYPE_XBOX }, + { 0x046d, 0xcaa3, "Logitech DriveFx Racing Wheel", 0, XTYPE_XBOX360 }, + { 0x056e, 0x2004, "Elecom JC-U3613M", 0, XTYPE_XBOX360 }, { 0x05fd, 0x1007, "Mad Catz Controller (unverified)", 0, XTYPE_XBOX }, { 0x05fd, 0x107a, "InterAct 'PowerPad Pro' X-Box pad (Germany)", 0, XTYPE_XBOX }, + { 0x05fe, 0x3030, "Chic Controller", 0, XTYPE_XBOX }, + { 0x05fe, 0x3031, "Chic Controller", 0, XTYPE_XBOX }, + { 0x062a, 0x0020, "Logic3 Xbox GamePad", 0, XTYPE_XBOX }, + { 0x062a, 0x0033, "Competition Pro Steering Wheel", 0, XTYPE_XBOX }, + { 0x06a3, 0x0200, "Saitek Racing Wheel", 0, XTYPE_XBOX }, + { 0x06a3, 0x0201, "Saitek Adrenalin", 0, XTYPE_XBOX }, + { 0x06a3, 0xf51a, "Saitek P3600", 0, XTYPE_XBOX360 }, + { 0x0738, 0x4506, "Mad Catz 4506 Wireless Controller", 0, XTYPE_XBOX }, { 0x0738, 0x4516, "Mad Catz Control Pad", 0, XTYPE_XBOX }, + { 0x0738, 0x4520, "Mad Catz Control Pad Pro", 0, XTYPE_XBOX }, { 0x0738, 0x4522, "Mad Catz LumiCON", 0, XTYPE_XBOX }, { 0x0738, 0x4526, "Mad Catz Control Pad Pro", 0, XTYPE_XBOX }, + { 0x0738, 0x4530, "Mad Catz Universal MC2 Racing Wheel and Pedals", 0, XTYPE_XBOX }, { 0x0738, 0x4536, "Mad Catz MicroCON", 0, XTYPE_XBOX }, { 0x0738, 0x4540, "Mad Catz Beat Pad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX }, { 0x0738, 0x4556, "Mad Catz Lynx Wireless Controller", 0, XTYPE_XBOX }, + { 0x0738, 0x4586, "Mad Catz MicroCon Wireless Controller", 0, XTYPE_XBOX }, + { 0x0738, 0x4588, "Mad Catz Blaster", 0, XTYPE_XBOX }, + { 0x0738, 0x45ff, "Mad Catz Beat Pad (w/ Handle)", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX }, { 0x0738, 0x4716, "Mad Catz Wired Xbox 360 Controller", 0, XTYPE_XBOX360 }, { 0x0738, 0x4718, "Mad Catz Street Fighter IV FightStick SE", 0, XTYPE_XBOX360 }, { 0x0738, 0x4726, "Mad Catz Xbox 360 Controller", 0, XTYPE_XBOX360 }, { 0x0738, 0x4728, "Mad Catz Street Fighter IV FightPad", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, + { 0x0738, 0x4736, "Mad Catz MicroCon Gamepad", 0, XTYPE_XBOX360 }, { 0x0738, 0x4738, "Mad Catz Wired Xbox 360 Controller (SFIV)", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, { 0x0738, 0x4740, "Mad Catz Beat Pad", 0, XTYPE_XBOX360 }, + { 0x0738, 0x4743, "Mad Catz Beat Pad Pro", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX }, + { 0x0738, 0x4758, "Mad Catz Arcade Game Stick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, + { 0x0738, 0x4a01, "Mad Catz FightStick TE 2", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOXONE }, { 0x0738, 0x6040, "Mad Catz Beat Pad Pro", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX }, + { 0x0738, 0x9871, "Mad Catz Portable Drum", 0, XTYPE_XBOX360 }, { 0x0738, 0xb726, "Mad Catz Xbox controller - MW2", 0, XTYPE_XBOX360 }, + { 0x0738, 0xb738, "Mad Catz MVC2TE Stick 2", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, { 0x0738, 0xbeef, "Mad Catz JOYTECH NEO SE Advanced GamePad", XTYPE_XBOX360 }, { 0x0738, 0xcb02, "Saitek Cyborg Rumble Pad - PC/Xbox 360", 0, XTYPE_XBOX360 }, { 0x0738, 0xcb03, "Saitek P3200 Rumble Pad - PC/Xbox 360", 0, XTYPE_XBOX360 }, + { 0x0738, 0xcb29, "Saitek Aviator Stick AV8R02", 0, XTYPE_XBOX360 }, { 0x0738, 0xf738, "Super SFIV FightStick TE S", 0, XTYPE_XBOX360 }, + { 0x07ff, 0xffff, "Mad Catz GamePad", 0, XTYPE_XBOX360 }, + { 0x0c12, 0x0005, "Intec wireless", 0, XTYPE_XBOX }, + { 0x0c12, 0x8801, "Nyko Xbox Controller", 0, XTYPE_XBOX }, { 0x0c12, 0x8802, "Zeroplus Xbox Controller", 0, XTYPE_XBOX }, { 0x0c12, 0x8809, "RedOctane Xbox Dance Pad", DANCEPAD_MAP_CONFIG, XTYPE_XBOX }, { 0x0c12, 0x880a, "Pelican Eclipse PL-2023", 0, XTYPE_XBOX }, @@ -163,32 +206,66 @@ static const struct xpad_device { { 0x0c12, 0x9902, "HAMA VibraX - *FAULTY HARDWARE*", 0, XTYPE_XBOX }, { 0x0d2f, 0x0002, "Andamiro Pump It Up pad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX }, { 0x0e4c, 0x1097, "Radica Gamester Controller", 0, XTYPE_XBOX }, + { 0x0e4c, 0x1103, "Radica Gamester Reflex", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX }, { 0x0e4c, 0x2390, "Radica Games Jtech Controller", 0, XTYPE_XBOX }, + { 0x0e4c, 0x3510, "Radica Gamester", 0, XTYPE_XBOX }, { 0x0e6f, 0x0003, "Logic3 Freebird wireless Controller", 0, XTYPE_XBOX }, { 0x0e6f, 0x0005, "Eclipse wireless Controller", 0, XTYPE_XBOX }, { 0x0e6f, 0x0006, "Edge wireless Controller", 0, XTYPE_XBOX }, + { 0x0e6f, 0x0008, "After Glow Pro Controller", 0, XTYPE_XBOX }, { 0x0e6f, 0x0105, "HSM3 Xbox360 dancepad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 }, { 0x0e6f, 0x0113, "Afterglow AX.1 Gamepad for Xbox 360", 0, XTYPE_XBOX360 }, + { 0x0e6f, 0x011f, "Rock Candy Gamepad Wired Controller", 0, XTYPE_XBOX360 }, + { 0x0e6f, 0x0131, "PDP EA Sports Controller", 0, XTYPE_XBOX360 }, + { 0x0e6f, 0x0133, "Xbox 360 Wired Controller", 0, XTYPE_XBOX360 }, + { 0x0e6f, 0x0139, "Afterglow Prismatic Wired Controller", 0, XTYPE_XBOXONE }, + { 0x0e6f, 0x013a, "PDP Xbox One Controller", 0, XTYPE_XBOXONE }, + { 0x0e6f, 0x0146, "Rock Candy Wired Controller for Xbox One", 0, XTYPE_XBOXONE }, + { 0x0e6f, 0x0147, "PDP Marvel Xbox One Controller", 0, XTYPE_XBOXONE }, + { 0x0e6f, 0x015c, "PDP Xbox One Arcade Stick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOXONE }, + { 0x0e6f, 0x0161, "PDP Xbox One Controller", 0, XTYPE_XBOXONE }, + { 0x0e6f, 0x0162, "PDP Xbox One Controller", 0, XTYPE_XBOXONE }, + { 0x0e6f, 0x0163, "PDP Xbox One Controller", 0, XTYPE_XBOXONE }, + { 0x0e6f, 0x0164, "PDP Battlefield One", 0, XTYPE_XBOXONE }, + { 0x0e6f, 0x0165, "PDP Titanfall 2", 0, XTYPE_XBOXONE }, { 0x0e6f, 0x0201, "Pelican PL-3601 'TSZ' Wired Xbox 360 Controller", 0, XTYPE_XBOX360 }, { 0x0e6f, 0x0213, "Afterglow Gamepad for Xbox 360", 0, XTYPE_XBOX360 }, { 0x0e6f, 0x021f, "Rock Candy Gamepad for Xbox 360", 0, XTYPE_XBOX360 }, + { 0x0e6f, 0x0246, "Rock Candy Gamepad for Xbox One 2015", 0, XTYPE_XBOXONE }, + { 0x0e6f, 0x02ab, "PDP Controller for Xbox One", 0, XTYPE_XBOXONE }, + { 0x0e6f, 0x02a4, "PDP Wired Controller for Xbox One - Stealth Series", 0, XTYPE_XBOXONE }, + { 0x0e6f, 0x02a6, "PDP Wired Controller for Xbox One - Camo Series", 0, XTYPE_XBOXONE }, { 0x0e6f, 0x0301, "Logic3 Controller", 0, XTYPE_XBOX360 }, + { 0x0e6f, 0x0346, "Rock Candy Gamepad for Xbox One 2016", 0, XTYPE_XBOXONE }, { 0x0e6f, 0x0401, "Logic3 Controller", 0, XTYPE_XBOX360 }, + { 0x0e6f, 0x0413, "Afterglow AX.1 Gamepad for Xbox 360", 0, XTYPE_XBOX360 }, + { 0x0e6f, 0x0501, "PDP Xbox 360 Controller", 0, XTYPE_XBOX360 }, + { 0x0e6f, 0xf900, "PDP Afterglow AX.1", 0, XTYPE_XBOX360 }, { 0x0e8f, 0x0201, "SmartJoy Frag Xpad/PS2 adaptor", 0, XTYPE_XBOX }, { 0x0e8f, 0x3008, "Generic xbox control (dealextreme)", 0, XTYPE_XBOX }, { 0x0f0d, 0x000a, "Hori Co. DOA4 FightStick", 0, XTYPE_XBOX360 }, + { 0x0f0d, 0x000c, "Hori PadEX Turbo", 0, XTYPE_XBOX360 }, { 0x0f0d, 0x000d, "Hori Fighting Stick EX2", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, { 0x0f0d, 0x0016, "Hori Real Arcade Pro.EX", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, + { 0x0f0d, 0x001b, "Hori Real Arcade Pro VX", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, + { 0x0f0d, 0x0063, "Hori Real Arcade Pro Hayabusa (USA) Xbox One", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOXONE }, + { 0x0f0d, 0x0067, "HORIPAD ONE", 0, XTYPE_XBOXONE }, + { 0x0f0d, 0x0078, "Hori Real Arcade Pro V Kai Xbox One", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOXONE }, + { 0x0f30, 0x010b, "Philips Recoil", 0, XTYPE_XBOX }, { 0x0f30, 0x0202, "Joytech Advanced Controller", 0, XTYPE_XBOX }, { 0x0f30, 0x8888, "BigBen XBMiniPad Controller", 0, XTYPE_XBOX }, { 0x102c, 0xff0c, "Joytech Wireless Advanced Controller", 0, XTYPE_XBOX }, + { 0x11c9, 0x55f0, "Nacon GC-100XF", 0, XTYPE_XBOX360 }, { 0x12ab, 0x0004, "Honey Bee Xbox360 dancepad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 }, { 0x12ab, 0x0301, "PDP AFTERGLOW AX.1", 0, XTYPE_XBOX360 }, + { 0x12ab, 0x0303, "Mortal Kombat Klassic FightStick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, { 0x12ab, 0x8809, "Xbox DDR dancepad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX }, { 0x1430, 0x4748, "RedOctane Guitar Hero X-plorer", 0, XTYPE_XBOX360 }, { 0x1430, 0x8888, "TX6500+ Dance Pad (first generation)", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX }, + { 0x1430, 0xf801, "RedOctane Controller", 0, XTYPE_XBOX360 }, { 0x146b, 0x0601, "BigBen Interactive XBOX 360 Controller", 0, XTYPE_XBOX360 }, { 0x1532, 0x0037, "Razer Sabertooth", 0, XTYPE_XBOX360 }, + { 0x1532, 0x0a00, "Razer Atrox Arcade Stick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOXONE }, { 0x1532, 0x0a03, "Razer Wildcat", 0, XTYPE_XBOXONE }, { 0x15e4, 0x3f00, "Power A Mini Pro Elite", 0, XTYPE_XBOX360 }, { 0x15e4, 0x3f0a, "Xbox Airflo wired controller", 0, XTYPE_XBOX360 }, @@ -196,24 +273,67 @@ static const struct xpad_device { { 0x162e, 0xbeef, "Joytech Neo-Se Take2", 0, XTYPE_XBOX360 }, { 0x1689, 0xfd00, "Razer Onza Tournament Edition", 0, XTYPE_XBOX360 }, { 0x1689, 0xfd01, "Razer Onza Classic Edition", 0, XTYPE_XBOX360 }, - { 0x24c6, 0x5d04, "Razer Sabertooth", 0, XTYPE_XBOX360 }, + { 0x1689, 0xfe00, "Razer Sabertooth", 0, XTYPE_XBOX360 }, { 0x1bad, 0x0002, "Harmonix Rock Band Guitar", 0, XTYPE_XBOX360 }, { 0x1bad, 0x0003, "Harmonix Rock Band Drumkit", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 }, + { 0x1bad, 0x0130, "Ion Drum Rocker", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 }, { 0x1bad, 0xf016, "Mad Catz Xbox 360 Controller", 0, XTYPE_XBOX360 }, + { 0x1bad, 0xf018, "Mad Catz Street Fighter IV SE Fighting Stick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, + { 0x1bad, 0xf019, "Mad Catz Brawlstick for Xbox 360", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, + { 0x1bad, 0xf021, "Mad Cats Ghost Recon FS GamePad", 0, XTYPE_XBOX360 }, { 0x1bad, 0xf023, "MLG Pro Circuit Controller (Xbox)", 0, XTYPE_XBOX360 }, + { 0x1bad, 0xf025, "Mad Catz Call Of Duty", 0, XTYPE_XBOX360 }, + { 0x1bad, 0xf027, "Mad Catz FPS Pro", 0, XTYPE_XBOX360 }, { 0x1bad, 0xf028, "Street Fighter IV FightPad", 0, XTYPE_XBOX360 }, + { 0x1bad, 0xf02e, "Mad Catz Fightpad", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, + { 0x1bad, 0xf030, "Mad Catz Xbox 360 MC2 MicroCon Racing Wheel", 0, XTYPE_XBOX360 }, + { 0x1bad, 0xf036, "Mad Catz MicroCon GamePad Pro", 0, XTYPE_XBOX360 }, { 0x1bad, 0xf038, "Street Fighter IV FightStick TE", 0, XTYPE_XBOX360 }, + { 0x1bad, 0xf039, "Mad Catz MvC2 TE", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, + { 0x1bad, 0xf03a, "Mad Catz SFxT Fightstick Pro", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, + { 0x1bad, 0xf03d, "Street Fighter IV Arcade Stick TE - Chun Li", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, + { 0x1bad, 0xf03e, "Mad Catz MLG FightStick TE", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, + { 0x1bad, 0xf03f, "Mad Catz FightStick SoulCaliber", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, + { 0x1bad, 0xf042, "Mad Catz FightStick TES+", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, + { 0x1bad, 0xf080, "Mad Catz FightStick TE2", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, + { 0x1bad, 0xf501, "HoriPad EX2 Turbo", 0, XTYPE_XBOX360 }, + { 0x1bad, 0xf502, "Hori Real Arcade Pro.VX SA", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, + { 0x1bad, 0xf503, "Hori Fighting Stick VX", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, + { 0x1bad, 0xf504, "Hori Real Arcade Pro. EX", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, + { 0x1bad, 0xf505, "Hori Fighting Stick EX2B", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, + { 0x1bad, 0xf506, "Hori Real Arcade Pro.EX Premium VLX", 0, XTYPE_XBOX360 }, { 0x1bad, 0xf900, "Harmonix Xbox 360 Controller", 0, XTYPE_XBOX360 }, { 0x1bad, 0xf901, "Gamestop Xbox 360 Controller", 0, XTYPE_XBOX360 }, { 0x1bad, 0xf903, "Tron Xbox 360 controller", 0, XTYPE_XBOX360 }, + { 0x1bad, 0xf904, "PDP Versus Fighting Pad", 0, XTYPE_XBOX360 }, + { 0x1bad, 0xf906, "MortalKombat FightStick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, + { 0x1bad, 0xfa01, "MadCatz GamePad", 0, XTYPE_XBOX360 }, + { 0x1bad, 0xfd00, "Razer Onza TE", 0, XTYPE_XBOX360 }, + { 0x1bad, 0xfd01, "Razer Onza", 0, XTYPE_XBOX360 }, { 0x24c6, 0x5000, "Razer Atrox Arcade Stick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, { 0x24c6, 0x5300, "PowerA MINI PROEX Controller", 0, XTYPE_XBOX360 }, { 0x24c6, 0x5303, "Xbox Airflo wired controller", 0, XTYPE_XBOX360 }, + { 0x24c6, 0x530a, "Xbox 360 Pro EX Controller", 0, XTYPE_XBOX360 }, + { 0x24c6, 0x531a, "PowerA Pro Ex", 0, XTYPE_XBOX360 }, + { 0x24c6, 0x5397, "FUS1ON Tournament Controller", 0, XTYPE_XBOX360 }, + { 0x24c6, 0x541a, "PowerA Xbox One Mini Wired Controller", 0, XTYPE_XBOXONE }, + { 0x24c6, 0x542a, "Xbox ONE spectra", 0, XTYPE_XBOXONE }, + { 0x24c6, 0x543a, "PowerA Xbox One wired controller", 0, XTYPE_XBOXONE }, { 0x24c6, 0x5500, "Hori XBOX 360 EX 2 with Turbo", 0, XTYPE_XBOX360 }, { 0x24c6, 0x5501, "Hori Real Arcade Pro VX-SA", 0, XTYPE_XBOX360 }, + { 0x24c6, 0x5502, "Hori Fighting Stick VX Alt", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, + { 0x24c6, 0x5503, "Hori Fighting Edge", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, { 0x24c6, 0x5506, "Hori SOULCALIBUR V Stick", 0, XTYPE_XBOX360 }, + { 0x24c6, 0x550d, "Hori GEM Xbox controller", 0, XTYPE_XBOX360 }, + { 0x24c6, 0x550e, "Hori Real Arcade Pro V Kai 360", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, + { 0x24c6, 0x551a, "PowerA FUSION Pro Controller", 0, XTYPE_XBOXONE }, + { 0x24c6, 0x561a, "PowerA FUSION Controller", 0, XTYPE_XBOXONE }, + { 0x24c6, 0x5b00, "ThrustMaster Ferrari 458 Racing Wheel", 0, XTYPE_XBOX360 }, { 0x24c6, 0x5b02, "Thrustmaster, Inc. GPX Controller", 0, XTYPE_XBOX360 }, { 0x24c6, 0x5b03, "Thrustmaster Ferrari 458 Racing Wheel", 0, XTYPE_XBOX360 }, + { 0x24c6, 0x5d04, "Razer Sabertooth", 0, XTYPE_XBOX360 }, + { 0x24c6, 0xfafe, "Rock Candy Gamepad for Xbox 360", 0, XTYPE_XBOX360 }, + { 0x3767, 0x0101, "Fanatec Speedster 3 Forceshock Wheel", 0, XTYPE_XBOX }, { 0xffff, 0xffff, "Chinese-made Xbox Controller", 0, XTYPE_XBOX }, { 0x0000, 0x0000, "Generic X-Box pad", 0, XTYPE_UNKNOWN } }; @@ -274,15 +394,15 @@ static const signed short xpad_abs_triggers[] = { * match against vendor id as well. Wired Xbox 360 devices have protocol 1, * wireless controllers have protocol 129. */ -#define XPAD_XBOX360_VENDOR_PROTOCOL(vend,pr) \ +#define XPAD_XBOX360_VENDOR_PROTOCOL(vend, pr) \ .match_flags = USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_INT_INFO, \ .idVendor = (vend), \ .bInterfaceClass = USB_CLASS_VENDOR_SPEC, \ .bInterfaceSubClass = 93, \ .bInterfaceProtocol = (pr) #define XPAD_XBOX360_VENDOR(vend) \ - { XPAD_XBOX360_VENDOR_PROTOCOL(vend,1) }, \ - { XPAD_XBOX360_VENDOR_PROTOCOL(vend,129) } + { XPAD_XBOX360_VENDOR_PROTOCOL((vend), 1) }, \ + { XPAD_XBOX360_VENDOR_PROTOCOL((vend), 129) } /* The Xbox One controller uses subclass 71 and protocol 208. */ #define XPAD_XBOXONE_VENDOR_PROTOCOL(vend, pr) \ @@ -292,33 +412,138 @@ static const signed short xpad_abs_triggers[] = { .bInterfaceSubClass = 71, \ .bInterfaceProtocol = (pr) #define XPAD_XBOXONE_VENDOR(vend) \ - { XPAD_XBOXONE_VENDOR_PROTOCOL(vend, 208) } + { XPAD_XBOXONE_VENDOR_PROTOCOL((vend), 208) } -static struct usb_device_id xpad_table[] = { +static const struct usb_device_id xpad_table[] = { { USB_INTERFACE_INFO('X', 'B', 0) }, /* X-Box USB-IF not approved class */ + XPAD_XBOX360_VENDOR(0x0079), /* GPD Win 2 Controller */ XPAD_XBOX360_VENDOR(0x044f), /* Thrustmaster X-Box 360 controllers */ XPAD_XBOX360_VENDOR(0x045e), /* Microsoft X-Box 360 controllers */ XPAD_XBOXONE_VENDOR(0x045e), /* Microsoft X-Box One controllers */ XPAD_XBOX360_VENDOR(0x046d), /* Logitech X-Box 360 style controllers */ + XPAD_XBOX360_VENDOR(0x056e), /* Elecom JC-U3613M */ + XPAD_XBOX360_VENDOR(0x06a3), /* Saitek P3600 */ XPAD_XBOX360_VENDOR(0x0738), /* Mad Catz X-Box 360 controllers */ { USB_DEVICE(0x0738, 0x4540) }, /* Mad Catz Beat Pad */ + XPAD_XBOXONE_VENDOR(0x0738), /* Mad Catz FightStick TE 2 */ + XPAD_XBOX360_VENDOR(0x07ff), /* Mad Catz GamePad */ XPAD_XBOX360_VENDOR(0x0e6f), /* 0x0e6f X-Box 360 controllers */ + XPAD_XBOXONE_VENDOR(0x0e6f), /* 0x0e6f X-Box One controllers */ + XPAD_XBOX360_VENDOR(0x0f0d), /* Hori Controllers */ + XPAD_XBOXONE_VENDOR(0x0f0d), /* Hori Controllers */ + XPAD_XBOX360_VENDOR(0x11c9), /* Nacon GC100XF */ XPAD_XBOX360_VENDOR(0x12ab), /* X-Box 360 dance pads */ XPAD_XBOX360_VENDOR(0x1430), /* RedOctane X-Box 360 controllers */ XPAD_XBOX360_VENDOR(0x146b), /* BigBen Interactive Controllers */ - XPAD_XBOX360_VENDOR(0x1bad), /* Harminix Rock Band Guitar and Drums */ - XPAD_XBOX360_VENDOR(0x0f0d), /* Hori Controllers */ - XPAD_XBOX360_VENDOR(0x1689), /* Razer Onza */ - XPAD_XBOX360_VENDOR(0x24c6), /* PowerA Controllers */ XPAD_XBOX360_VENDOR(0x1532), /* Razer Sabertooth */ XPAD_XBOXONE_VENDOR(0x1532), /* Razer Wildcat */ XPAD_XBOX360_VENDOR(0x15e4), /* Numark X-Box 360 controllers */ XPAD_XBOX360_VENDOR(0x162e), /* Joytech X-Box 360 controllers */ + XPAD_XBOX360_VENDOR(0x1689), /* Razer Onza */ + XPAD_XBOX360_VENDOR(0x1bad), /* Harminix Rock Band Guitar and Drums */ + XPAD_XBOX360_VENDOR(0x24c6), /* PowerA Controllers */ + XPAD_XBOXONE_VENDOR(0x24c6), /* PowerA Controllers */ { } }; MODULE_DEVICE_TABLE(usb, xpad_table); +struct xboxone_init_packet { + u16 idVendor; + u16 idProduct; + const u8 *data; + u8 len; +}; + +#define XBOXONE_INIT_PKT(_vid, _pid, _data) \ + { \ + .idVendor = (_vid), \ + .idProduct = (_pid), \ + .data = (_data), \ + .len = ARRAY_SIZE(_data), \ + } + + +/* + * This packet is required for all Xbox One pads with 2015 + * or later firmware installed (or present from the factory). + */ +static const u8 xboxone_fw2015_init[] = { + 0x05, 0x20, 0x00, 0x01, 0x00 +}; + +/* + * This packet is required for the Titanfall 2 Xbox One pads + * (0x0e6f:0x0165) to finish initialization and for Hori pads + * (0x0f0d:0x0067) to make the analog sticks work. + */ +static const u8 xboxone_hori_init[] = { + 0x01, 0x20, 0x00, 0x09, 0x00, 0x04, 0x20, 0x3a, + 0x00, 0x00, 0x00, 0x80, 0x00 +}; + +/* + * This packet is required for some of the PDP pads to start + * sending input reports. These pads include: (0x0e6f:0x02ab), + * (0x0e6f:0x02a4). + */ +static const u8 xboxone_pdp_init1[] = { + 0x0a, 0x20, 0x00, 0x03, 0x00, 0x01, 0x14 +}; + +/* + * This packet is required for some of the PDP pads to start + * sending input reports. These pads include: (0x0e6f:0x02ab), + * (0x0e6f:0x02a4). + */ +static const u8 xboxone_pdp_init2[] = { + 0x06, 0x20, 0x00, 0x02, 0x01, 0x00 +}; + +/* + * A specific rumble packet is required for some PowerA pads to start + * sending input reports. One of those pads is (0x24c6:0x543a). + */ +static const u8 xboxone_rumblebegin_init[] = { + 0x09, 0x00, 0x00, 0x09, 0x00, 0x0F, 0x00, 0x00, + 0x1D, 0x1D, 0xFF, 0x00, 0x00 +}; + +/* + * A rumble packet with zero FF intensity will immediately + * terminate the rumbling required to init PowerA pads. + * This should happen fast enough that the motors don't + * spin up to enough speed to actually vibrate the gamepad. + */ +static const u8 xboxone_rumbleend_init[] = { + 0x09, 0x00, 0x00, 0x09, 0x00, 0x0F, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00 +}; + +/* + * This specifies the selection of init packets that a gamepad + * will be sent on init *and* the order in which they will be + * sent. The correct sequence number will be added when the + * packet is going to be sent. + */ +static const struct xboxone_init_packet xboxone_init_packets[] = { + XBOXONE_INIT_PKT(0x0e6f, 0x0165, xboxone_hori_init), + XBOXONE_INIT_PKT(0x0f0d, 0x0067, xboxone_hori_init), + XBOXONE_INIT_PKT(0x0000, 0x0000, xboxone_fw2015_init), + XBOXONE_INIT_PKT(0x0e6f, 0x02ab, xboxone_pdp_init1), + XBOXONE_INIT_PKT(0x0e6f, 0x02ab, xboxone_pdp_init2), + XBOXONE_INIT_PKT(0x0e6f, 0x02a4, xboxone_pdp_init1), + XBOXONE_INIT_PKT(0x0e6f, 0x02a4, xboxone_pdp_init2), + XBOXONE_INIT_PKT(0x0e6f, 0x02a6, xboxone_pdp_init1), + XBOXONE_INIT_PKT(0x0e6f, 0x02a6, xboxone_pdp_init2), + XBOXONE_INIT_PKT(0x24c6, 0x541a, xboxone_rumblebegin_init), + XBOXONE_INIT_PKT(0x24c6, 0x542a, xboxone_rumblebegin_init), + XBOXONE_INIT_PKT(0x24c6, 0x543a, xboxone_rumblebegin_init), + XBOXONE_INIT_PKT(0x24c6, 0x541a, xboxone_rumbleend_init), + XBOXONE_INIT_PKT(0x24c6, 0x542a, xboxone_rumbleend_init), + XBOXONE_INIT_PKT(0x24c6, 0x543a, xboxone_rumbleend_init), +}; + struct xpad_output_packet { u8 data[XPAD_PKT_LEN]; u8 len; @@ -334,23 +559,28 @@ struct xpad_output_packet { struct usb_xpad { struct input_dev *dev; /* input device interface */ + struct input_dev __rcu *x360w_dev; struct usb_device *udev; /* usb device */ struct usb_interface *intf; /* usb interface */ - int pad_present; + bool pad_present; + bool input_created; struct urb *irq_in; /* urb for interrupt in report */ unsigned char *idata; /* input data */ dma_addr_t idata_dma; struct urb *irq_out; /* urb for interrupt out report */ + struct usb_anchor irq_out_anchor; bool irq_out_active; /* we must not use an active URB */ + u8 odata_serial; /* serial number for xbox one protocol */ unsigned char *odata; /* output data */ dma_addr_t odata_dma; spinlock_t odata_lock; struct xpad_output_packet out_packets[XPAD_NUM_OUT_PACKETS]; int last_out_packet; + int init_seq; #if defined(CONFIG_JOYSTICK_XPAD_LEDS) struct xpad_led *led; @@ -362,8 +592,13 @@ struct usb_xpad { int xtype; /* type of xbox device */ int pad_nr; /* the order x360 pads were attached */ const char *name; /* name of the device */ + struct work_struct work; /* init/remove device from callback */ }; +static int xpad_init_input(struct usb_xpad *xpad); +static void xpad_deinit_input(struct usb_xpad *xpad); +static void xpadone_ack_mode_report(struct usb_xpad *xpad, u8 seq_num); + /* * xpad_process_packet * @@ -443,10 +678,12 @@ static void xpad_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned char *d * http://www.free60.org/wiki/Gamepad */ -static void xpad360_process_packet(struct usb_xpad *xpad, +static void xpad360_process_packet(struct usb_xpad *xpad, struct input_dev *dev, u16 cmd, unsigned char *data) { - struct input_dev *dev = xpad->dev; + /* valid pad data */ + if (data[0] != 0x00) + return; /* digital pad */ if (xpad->mapping & MAP_DPAD_TO_BUTTONS) { @@ -514,7 +751,30 @@ static void xpad360_process_packet(struct usb_xpad *xpad, input_sync(dev); } -static void xpad_identify_controller(struct usb_xpad *xpad); +static void xpad_presence_work(struct work_struct *work) +{ + struct usb_xpad *xpad = container_of(work, struct usb_xpad, work); + int error; + + if (xpad->pad_present) { + error = xpad_init_input(xpad); + if (error) { + /* complain only, not much else we can do here */ + dev_err(&xpad->dev->dev, + "unable to init device: %d\n", error); + } else { + rcu_assign_pointer(xpad->x360w_dev, xpad->dev); + } + } else { + RCU_INIT_POINTER(xpad->x360w_dev, NULL); + synchronize_rcu(); + /* + * Now that we are sure xpad360w_process_packet is not + * using input device we can get rid of it. + */ + xpad_deinit_input(xpad); + } +} /* * xpad360w_process_packet @@ -532,35 +792,61 @@ static void xpad_identify_controller(struct usb_xpad *xpad); */ static void xpad360w_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned char *data) { + struct input_dev *dev; + bool present; + /* Presence change */ if (data[0] & 0x08) { - if (data[1] & 0x80) { - xpad->pad_present = 1; - /* - * Light up the segment corresponding to - * controller number. - */ - xpad_identify_controller(xpad); - } else - xpad->pad_present = 0; + present = (data[1] & 0x80) != 0; + + if (xpad->pad_present != present) { + xpad->pad_present = present; + schedule_work(&xpad->work); + } } /* Valid pad data */ - if (!(data[1] & 0x1)) + if (data[1] != 0x1) return; - xpad360_process_packet(xpad, cmd, &data[4]); + rcu_read_lock(); + dev = rcu_dereference(xpad->x360w_dev); + if (dev) + xpad360_process_packet(xpad, dev, cmd, &data[4]); + rcu_read_unlock(); } /* - * xpadone_process_buttons + * xpadone_process_packet * - * Process a button update packet from an Xbox one controller. + * Completes a request by converting the data into events for the + * input subsystem. This version is for the Xbox One controller. + * + * The report format was gleaned from + * https://github.com/kylelemons/xbox/blob/master/xbox.go */ -static void xpadone_process_buttons(struct usb_xpad *xpad, - struct input_dev *dev, - unsigned char *data) +static void xpadone_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned char *data) { + struct input_dev *dev = xpad->dev; + + /* the xbox button has its own special report */ + if (data[0] == 0X07) { + /* + * The Xbox One S controller requires these reports to be + * acked otherwise it continues sending them forever and + * won't report further mode button events. + */ + if (data[1] == 0x30) + xpadone_ack_mode_report(xpad, data[2]); + + input_report_key(dev, BTN_MODE, data[4] & 0x01); + input_sync(dev); + return; + } + /* check invalid packet */ + else if (data[0] != 0X20) + return; + /* menu/view buttons */ input_report_key(dev, BTN_START, data[4] & 0x04); input_report_key(dev, BTN_SELECT, data[4] & 0x08); @@ -623,34 +909,6 @@ static void xpadone_process_buttons(struct usb_xpad *xpad, input_sync(dev); } -/* - * xpadone_process_packet - * - * Completes a request by converting the data into events for the - * input subsystem. This version is for the Xbox One controller. - * - * The report format was gleaned from - * https://github.com/kylelemons/xbox/blob/master/xbox.go - */ - -static void xpadone_process_packet(struct usb_xpad *xpad, - u16 cmd, unsigned char *data) -{ - struct input_dev *dev = xpad->dev; - - switch (data[0]) { - case 0x20: - xpadone_process_buttons(xpad, dev, data); - break; - - case 0x07: - /* the xbox button has its own special report */ - input_report_key(dev, BTN_MODE, data[4] & 0x01); - input_sync(dev); - break; - } -} - static void xpad_irq_in(struct urb *urb) { struct usb_xpad *xpad = urb->context; @@ -678,7 +936,7 @@ static void xpad_irq_in(struct urb *urb) switch (xpad->xtype) { case XTYPE_XBOX360: - xpad360_process_packet(xpad, 0, xpad->idata); + xpad360_process_packet(xpad, xpad->dev, 0, xpad->idata); break; case XTYPE_XBOX360W: xpad360w_process_packet(xpad, 0, xpad->idata); @@ -697,12 +955,48 @@ exit: __func__, retval); } +/* Callers must hold xpad->odata_lock spinlock */ +static bool xpad_prepare_next_init_packet(struct usb_xpad *xpad) +{ + const struct xboxone_init_packet *init_packet; + + if (xpad->xtype != XTYPE_XBOXONE) + return false; + + /* Perform initialization sequence for Xbox One pads that require it */ + while (xpad->init_seq < ARRAY_SIZE(xboxone_init_packets)) { + init_packet = &xboxone_init_packets[xpad->init_seq++]; + + if (init_packet->idVendor != 0 && + init_packet->idVendor != xpad->dev->id.vendor) + continue; + + if (init_packet->idProduct != 0 && + init_packet->idProduct != xpad->dev->id.product) + continue; + + /* This packet applies to our device, so prepare to send it */ + memcpy(xpad->odata, init_packet->data, init_packet->len); + xpad->irq_out->transfer_buffer_length = init_packet->len; + + /* Update packet with current sequence number */ + xpad->odata[2] = xpad->odata_serial++; + return true; + } + + return false; +} + /* Callers must hold xpad->odata_lock spinlock */ static bool xpad_prepare_next_out_packet(struct usb_xpad *xpad) { struct xpad_output_packet *pkt, *packet = NULL; int i; + /* We may have init packets to send before we can send user commands */ + if (xpad_prepare_next_init_packet(xpad)) + return true; + for (i = 0; i < XPAD_NUM_OUT_PACKETS; i++) { if (++xpad->last_out_packet >= XPAD_NUM_OUT_PACKETS) xpad->last_out_packet = 0; @@ -733,11 +1027,13 @@ static int xpad_try_sending_next_out_packet(struct usb_xpad *xpad) int error; if (!xpad->irq_out_active && xpad_prepare_next_out_packet(xpad)) { + usb_anchor_urb(xpad->irq_out, &xpad->irq_out_anchor); error = usb_submit_urb(xpad->irq_out, GFP_ATOMIC); if (error) { dev_err(&xpad->intf->dev, "%s - usb_submit_urb failed with result %d\n", __func__, error); + usb_unanchor_urb(xpad->irq_out); return -EIO; } @@ -779,11 +1075,13 @@ static void xpad_irq_out(struct urb *urb) } if (xpad->irq_out_active) { + usb_anchor_urb(urb, &xpad->irq_out_anchor); error = usb_submit_urb(urb, GFP_ATOMIC); if (error) { dev_err(dev, "%s - usb_submit_urb failed with result %d\n", __func__, error); + usb_unanchor_urb(urb); xpad->irq_out_active = false; } } @@ -791,34 +1089,29 @@ static void xpad_irq_out(struct urb *urb) spin_unlock_irqrestore(&xpad->odata_lock, flags); } -static int xpad_init_output(struct usb_interface *intf, struct usb_xpad *xpad) +static int xpad_init_output(struct usb_interface *intf, struct usb_xpad *xpad, + struct usb_endpoint_descriptor *ep_irq_out) { - struct usb_endpoint_descriptor *ep_irq_out; - int ep_irq_out_idx; int error; if (xpad->xtype == XTYPE_UNKNOWN) return 0; + init_usb_anchor(&xpad->irq_out_anchor); + xpad->odata = usb_alloc_coherent(xpad->udev, XPAD_PKT_LEN, GFP_KERNEL, &xpad->odata_dma); - if (!xpad->odata) { - error = -ENOMEM; - goto fail1; - } + if (!xpad->odata) + return -ENOMEM; spin_lock_init(&xpad->odata_lock); xpad->irq_out = usb_alloc_urb(0, GFP_KERNEL); if (!xpad->irq_out) { error = -ENOMEM; - goto fail2; + goto err_free_coherent; } - /* Xbox One controller has in/out endpoints swapped. */ - ep_irq_out_idx = xpad->xtype == XTYPE_XBOXONE ? 0 : 1; - ep_irq_out = &intf->cur_altsetting->endpoint[ep_irq_out_idx].desc; - usb_fill_int_urb(xpad->irq_out, xpad->udev, usb_sndintpipe(xpad->udev, ep_irq_out->bEndpointAddress), xpad->odata, XPAD_PKT_LEN, @@ -828,14 +1121,21 @@ static int xpad_init_output(struct usb_interface *intf, struct usb_xpad *xpad) return 0; - fail2: usb_free_coherent(xpad->udev, XPAD_PKT_LEN, xpad->odata, xpad->odata_dma); - fail1: return error; +err_free_coherent: + usb_free_coherent(xpad->udev, XPAD_PKT_LEN, xpad->odata, xpad->odata_dma); + return error; } static void xpad_stop_output(struct usb_xpad *xpad) { - if (xpad->xtype != XTYPE_UNKNOWN) - usb_kill_urb(xpad->irq_out); + if (xpad->xtype != XTYPE_UNKNOWN) { + if (!usb_wait_anchor_empty_timeout(&xpad->irq_out_anchor, + 5000)) { + dev_warn(&xpad->intf->dev, + "timed out waiting for output URB to complete, killing\n"); + usb_kill_anchored_urbs(&xpad->irq_out_anchor); + } + } } static void xpad_deinit_output(struct usb_xpad *xpad) @@ -882,21 +1182,17 @@ static int xpad_inquiry_pad_presence(struct usb_xpad *xpad) static int xpad_start_xbox_one(struct usb_xpad *xpad) { - struct xpad_output_packet *packet = - &xpad->out_packets[XPAD_OUT_CMD_IDX]; unsigned long flags; int retval; spin_lock_irqsave(&xpad->odata_lock, flags); - /* Xbox one controller needs to be initialized. */ - packet->data[0] = 0x05; - packet->data[1] = 0x20; - packet->len = 2; - packet->pending = true; - - /* Reset the sequence so we send out start packet first */ - xpad->last_out_packet = -1; + /* + * Begin the init sequence by attempting to send a packet. + * We will cycle through the init packet sequence before + * sending any packets from the output ring. + */ + xpad->init_seq = 0; retval = xpad_try_sending_next_out_packet(xpad); spin_unlock_irqrestore(&xpad->odata_lock, flags); @@ -904,6 +1200,30 @@ static int xpad_start_xbox_one(struct usb_xpad *xpad) return retval; } +static void xpadone_ack_mode_report(struct usb_xpad *xpad, u8 seq_num) +{ + unsigned long flags; + struct xpad_output_packet *packet = + &xpad->out_packets[XPAD_OUT_CMD_IDX]; + static const u8 mode_report_ack[] = { + 0x01, 0x20, 0x00, 0x09, 0x00, 0x07, 0x20, 0x02, + 0x00, 0x00, 0x00, 0x00, 0x00 + }; + + spin_lock_irqsave(&xpad->odata_lock, flags); + + packet->len = sizeof(mode_report_ack); + memcpy(packet->data, mode_report_ack, packet->len); + packet->data[2] = seq_num; + packet->pending = true; + + /* Reset the sequence so we send out the ack now */ + xpad->last_out_packet = -1; + xpad_try_sending_next_out_packet(xpad); + + spin_unlock_irqrestore(&xpad->odata_lock, flags); +} + #ifdef CONFIG_JOYSTICK_XPAD_FF static int xpad_play_effect(struct input_dev *dev, void *data, struct ff_effect *effect) { @@ -966,18 +1286,19 @@ static int xpad_play_effect(struct input_dev *dev, void *data, struct ff_effect case XTYPE_XBOXONE: packet->data[0] = 0x09; /* activate rumble */ - packet->data[1] = 0x08; - packet->data[2] = 0x00; - packet->data[3] = 0x08; /* continuous effect */ - packet->data[4] = 0x00; /* simple rumble mode */ - packet->data[5] = 0x03; /* L and R actuator only */ - packet->data[6] = 0x00; /* TODO: LT actuator */ - packet->data[7] = 0x00; /* TODO: RT actuator */ - packet->data[8] = strong / 256; /* left actuator */ - packet->data[9] = weak / 256; /* right actuator */ - packet->data[10] = 0x80; /* length of pulse */ - packet->data[11] = 0x00; /* stop period of pulse */ - packet->len = 12; + packet->data[1] = 0x00; + packet->data[2] = xpad->odata_serial++; + packet->data[3] = 0x09; + packet->data[4] = 0x00; + packet->data[5] = 0x0F; + packet->data[6] = 0x00; + packet->data[7] = 0x00; + packet->data[8] = strong / 512; /* left actuator */ + packet->data[9] = weak / 512; /* right actuator */ + packet->data[10] = 0xFF; /* on period */ + packet->data[11] = 0x00; /* off period */ + packet->data[12] = 0xFF; /* repeat count */ + packet->len = 13; packet->pending = true; break; @@ -1090,7 +1411,7 @@ static void xpad_send_led_command(struct usb_xpad *xpad, int command) */ static void xpad_identify_controller(struct usb_xpad *xpad) { - xpad_send_led_command(xpad, (xpad->pad_nr % 4) + 2); + led_set_brightness(&xpad->led->led_cdev, (xpad->pad_nr % 4) + 2); } static void xpad_led_set(struct led_classdev *led_cdev, @@ -1127,19 +1448,13 @@ static int xpad_led_probe(struct usb_xpad *xpad) led_cdev = &led->led_cdev; led_cdev->name = led->name; led_cdev->brightness_set = xpad_led_set; + led_cdev->flags = LED_CORE_SUSPENDRESUME; error = led_classdev_register(&xpad->udev->dev, led_cdev); if (error) goto err_free_id; - if (xpad->xtype == XTYPE_XBOX360) { - /* - * Light up the segment corresponding to controller - * number on wired devices. On wireless we'll do that - * when they respond to "presence" packet. - */ - xpad_identify_controller(xpad); - } + xpad_identify_controller(xpad); return 0; @@ -1164,41 +1479,110 @@ static void xpad_led_disconnect(struct usb_xpad *xpad) #else static int xpad_led_probe(struct usb_xpad *xpad) { return 0; } static void xpad_led_disconnect(struct usb_xpad *xpad) { } -static void xpad_identify_controller(struct usb_xpad *xpad) { } #endif -static int xpad_open(struct input_dev *dev) +static int xpad_start_input(struct usb_xpad *xpad) { - struct usb_xpad *xpad = input_get_drvdata(dev); - - /* URB was submitted in probe */ - if (xpad->xtype == XTYPE_XBOX360W) - return 0; + int error; - xpad->irq_in->dev = xpad->udev; if (usb_submit_urb(xpad->irq_in, GFP_KERNEL)) return -EIO; - if (xpad->xtype == XTYPE_XBOXONE) - return xpad_start_xbox_one(xpad); + if (xpad->xtype == XTYPE_XBOXONE) { + error = xpad_start_xbox_one(xpad); + if (error) { + usb_kill_urb(xpad->irq_in); + return error; + } + } return 0; } -static void xpad_close(struct input_dev *dev) +static void xpad_stop_input(struct usb_xpad *xpad) { - struct usb_xpad *xpad = input_get_drvdata(dev); + usb_kill_urb(xpad->irq_in); +} - if (xpad->xtype != XTYPE_XBOX360W) +static void xpad360w_poweroff_controller(struct usb_xpad *xpad) +{ + unsigned long flags; + struct xpad_output_packet *packet = + &xpad->out_packets[XPAD_OUT_CMD_IDX]; + + spin_lock_irqsave(&xpad->odata_lock, flags); + + packet->data[0] = 0x00; + packet->data[1] = 0x00; + packet->data[2] = 0x08; + packet->data[3] = 0xC0; + packet->data[4] = 0x00; + packet->data[5] = 0x00; + packet->data[6] = 0x00; + packet->data[7] = 0x00; + packet->data[8] = 0x00; + packet->data[9] = 0x00; + packet->data[10] = 0x00; + packet->data[11] = 0x00; + packet->len = 12; + packet->pending = true; + + /* Reset the sequence so we send out poweroff now */ + xpad->last_out_packet = -1; + xpad_try_sending_next_out_packet(xpad); + + spin_unlock_irqrestore(&xpad->odata_lock, flags); +} + +static int xpad360w_start_input(struct usb_xpad *xpad) +{ + int error; + + error = usb_submit_urb(xpad->irq_in, GFP_KERNEL); + if (error) + return -EIO; + + /* + * Send presence packet. + * This will force the controller to resend connection packets. + * This is useful in the case we activate the module after the + * adapter has been plugged in, as it won't automatically + * send us info about the controllers. + */ + error = xpad_inquiry_pad_presence(xpad); + if (error) { usb_kill_urb(xpad->irq_in); + return error; + } - xpad_stop_output(xpad); + return 0; +} + +static void xpad360w_stop_input(struct usb_xpad *xpad) +{ + usb_kill_urb(xpad->irq_in); + + /* Make sure we are done with presence work if it was scheduled */ + flush_work(&xpad->work); +} + +static int xpad_open(struct input_dev *dev) +{ + struct usb_xpad *xpad = input_get_drvdata(dev); + + return xpad_start_input(xpad); +} + +static void xpad_close(struct input_dev *dev) +{ + struct usb_xpad *xpad = input_get_drvdata(dev); + + xpad_stop_input(xpad); } static void xpad_set_up_abs(struct input_dev *input_dev, signed short abs) { struct usb_xpad *xpad = input_get_drvdata(input_dev); - set_bit(abs, input_dev->absbit); switch (abs) { case ABS_X: @@ -1218,13 +1602,19 @@ static void xpad_set_up_abs(struct input_dev *input_dev, signed short abs) case ABS_HAT0Y: /* the d-pad (only if dpad is mapped to axes */ input_set_abs_params(input_dev, abs, -1, 1, 0, 0); break; + default: + input_set_abs_params(input_dev, abs, 0, 0, 0, 0); + break; } } static void xpad_deinit_input(struct usb_xpad *xpad) { - xpad_led_disconnect(xpad); - input_unregister_device(xpad->dev); + if (xpad->input_created) { + xpad->input_created = false; + xpad_led_disconnect(xpad); + input_unregister_device(xpad->dev); + } } static int xpad_init_input(struct usb_xpad *xpad) @@ -1250,13 +1640,12 @@ static int xpad_init_input(struct usb_xpad *xpad) input_set_drvdata(input_dev, xpad); - input_dev->open = xpad_open; - input_dev->close = xpad_close; - - __set_bit(EV_KEY, input_dev->evbit); + if (xpad->xtype != XTYPE_XBOX360W) { + input_dev->open = xpad_open; + input_dev->close = xpad_close; + } if (!(xpad->mapping & MAP_STICKS_TO_NULL)) { - __set_bit(EV_ABS, input_dev->evbit); /* set up axes */ for (i = 0; xpad_abs[i] >= 0; i++) xpad_set_up_abs(input_dev, xpad_abs[i]); @@ -1264,21 +1653,22 @@ static int xpad_init_input(struct usb_xpad *xpad) /* set up standard buttons */ for (i = 0; xpad_common_btn[i] >= 0; i++) - __set_bit(xpad_common_btn[i], input_dev->keybit); + input_set_capability(input_dev, EV_KEY, xpad_common_btn[i]); /* set up model-specific ones */ if (xpad->xtype == XTYPE_XBOX360 || xpad->xtype == XTYPE_XBOX360W || xpad->xtype == XTYPE_XBOXONE) { for (i = 0; xpad360_btn[i] >= 0; i++) - __set_bit(xpad360_btn[i], input_dev->keybit); + input_set_capability(input_dev, EV_KEY, xpad360_btn[i]); } else { for (i = 0; xpad_btn[i] >= 0; i++) - __set_bit(xpad_btn[i], input_dev->keybit); + input_set_capability(input_dev, EV_KEY, xpad_btn[i]); } if (xpad->mapping & MAP_DPAD_TO_BUTTONS) { for (i = 0; xpad_btn_pad[i] >= 0; i++) - __set_bit(xpad_btn_pad[i], input_dev->keybit); + input_set_capability(input_dev, EV_KEY, + xpad_btn_pad[i]); } /* @@ -1295,7 +1685,8 @@ static int xpad_init_input(struct usb_xpad *xpad) if (xpad->mapping & MAP_TRIGGERS_TO_BUTTONS) { for (i = 0; xpad_btn_triggers[i] >= 0; i++) - __set_bit(xpad_btn_triggers[i], input_dev->keybit); + input_set_capability(input_dev, EV_KEY, + xpad_btn_triggers[i]); } else { for (i = 0; xpad_abs_triggers[i] >= 0; i++) xpad_set_up_abs(input_dev, xpad_abs_triggers[i]); @@ -1313,6 +1704,7 @@ static int xpad_init_input(struct usb_xpad *xpad) if (error) goto err_disconnect_led; + xpad->input_created = true; return 0; err_disconnect_led: @@ -1328,8 +1720,7 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id { struct usb_device *udev = interface_to_usbdev(intf); struct usb_xpad *xpad; - struct usb_endpoint_descriptor *ep_irq_in; - int ep_irq_in_idx; + struct usb_endpoint_descriptor *ep_irq_in, *ep_irq_out; int i, error; if (intf->cur_altsetting->desc.bNumEndpoints != 2) @@ -1366,6 +1757,7 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id xpad->mapping = xpad_device[i].mapping; xpad->xtype = xpad_device[i].xtype; xpad->name = xpad_device[i].name; + INIT_WORK(&xpad->work, xpad_presence_work); if (xpad->xtype == XTYPE_UNKNOWN) { if (intf->cur_altsetting->desc.bInterfaceClass == USB_CLASS_VENDOR_SPEC) { @@ -1398,13 +1790,28 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id goto err_free_in_urb; } - error = xpad_init_output(intf, xpad); - if (error) + ep_irq_in = ep_irq_out = NULL; + + for (i = 0; i < 2; i++) { + struct usb_endpoint_descriptor *ep = + &intf->cur_altsetting->endpoint[i].desc; + + if (usb_endpoint_xfer_int(ep)) { + if (usb_endpoint_dir_in(ep)) + ep_irq_in = ep; + else + ep_irq_out = ep; + } + } + + if (!ep_irq_in || !ep_irq_out) { + error = -ENODEV; goto err_free_in_urb; + } - /* Xbox One controller has in/out endpoints swapped. */ - ep_irq_in_idx = xpad->xtype == XTYPE_XBOXONE ? 1 : 0; - ep_irq_in = &intf->cur_altsetting->endpoint[ep_irq_in_idx].desc; + error = xpad_init_output(intf, xpad, ep_irq_out); + if (error) + goto err_free_in_urb; usb_fill_int_urb(xpad->irq_in, udev, usb_rcvintpipe(udev, ep_irq_in->bEndpointAddress), @@ -1415,10 +1822,6 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id usb_set_intfdata(intf, xpad); - error = xpad_init_input(xpad); - if (error) - goto err_deinit_output; - if (xpad->xtype == XTYPE_XBOX360W) { /* * Submit the int URB immediately rather than waiting for open @@ -1427,28 +1830,24 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id * exactly the message that a controller has arrived that * we're waiting for. */ - xpad->irq_in->dev = xpad->udev; - error = usb_submit_urb(xpad->irq_in, GFP_KERNEL); + error = xpad360w_start_input(xpad); if (error) - goto err_deinit_input; - + goto err_deinit_output; /* - * Send presence packet. - * This will force the controller to resend connection packets. - * This is useful in the case we activate the module after the - * adapter has been plugged in, as it won't automatically - * send us info about the controllers. + * Wireless controllers require RESET_RESUME to work properly + * after suspend. Ideally this quirk should be in usb core + * quirk list, but we have too many vendors producing these + * controllers and we'd need to maintain 2 identical lists + * here in this driver and in usb core. */ - error = xpad_inquiry_pad_presence(xpad); + udev->quirks |= USB_QUIRK_RESET_RESUME; + } else { + error = xpad_init_input(xpad); if (error) - goto err_kill_in_urb; + goto err_deinit_output; } return 0; -err_kill_in_urb: - usb_kill_urb(xpad->irq_in); -err_deinit_input: - xpad_deinit_input(xpad); err_deinit_output: xpad_deinit_output(xpad); err_free_in_urb: @@ -1458,19 +1857,24 @@ err_free_idata: err_free_mem: kfree(xpad); return error; - } static void xpad_disconnect(struct usb_interface *intf) { - struct usb_xpad *xpad = usb_get_intfdata (intf); + struct usb_xpad *xpad = usb_get_intfdata(intf); + + if (xpad->xtype == XTYPE_XBOX360W) + xpad360w_stop_input(xpad); xpad_deinit_input(xpad); - xpad_deinit_output(xpad); - if (xpad->xtype == XTYPE_XBOX360W) { - usb_kill_urb(xpad->irq_in); - } + /* + * Now that both input device and LED device are gone we can + * stop output URB. + */ + xpad_stop_output(xpad); + + xpad_deinit_output(xpad); usb_free_urb(xpad->irq_in); usb_free_coherent(xpad->udev, XPAD_PKT_LEN, @@ -1481,10 +1885,72 @@ static void xpad_disconnect(struct usb_interface *intf) usb_set_intfdata(intf, NULL); } +static int xpad_suspend(struct usb_interface *intf, pm_message_t message) +{ + struct usb_xpad *xpad = usb_get_intfdata(intf); + struct input_dev *input = xpad->dev; + + if (xpad->xtype == XTYPE_XBOX360W) { + /* + * Wireless controllers always listen to input so + * they are notified when controller shows up + * or goes away. + */ + xpad360w_stop_input(xpad); + + /* + * The wireless adapter is going off now, so the + * gamepads are going to become disconnected. + * Unless explicitly disabled, power them down + * so they don't just sit there flashing. + */ + if (auto_poweroff && xpad->pad_present) + xpad360w_poweroff_controller(xpad); + } else { + mutex_lock(&input->mutex); + if (input->users) + xpad_stop_input(xpad); + mutex_unlock(&input->mutex); + } + + xpad_stop_output(xpad); + + return 0; +} + +static int xpad_resume(struct usb_interface *intf) +{ + struct usb_xpad *xpad = usb_get_intfdata(intf); + struct input_dev *input = xpad->dev; + int retval = 0; + + if (xpad->xtype == XTYPE_XBOX360W) { + retval = xpad360w_start_input(xpad); + } else { + mutex_lock(&input->mutex); + if (input->users) { + retval = xpad_start_input(xpad); + } else if (xpad->xtype == XTYPE_XBOXONE) { + /* + * Even if there are no users, we'll send Xbox One pads + * the startup sequence so they don't sit there and + * blink until somebody opens the input device again. + */ + retval = xpad_start_xbox_one(xpad); + } + mutex_unlock(&input->mutex); + } + + return retval; +} + static struct usb_driver xpad_driver = { .name = "xpad", .probe = xpad_probe, .disconnect = xpad_disconnect, + .suspend = xpad_suspend, + .resume = xpad_resume, + .reset_resume = xpad_resume, .id_table = xpad_table, }; diff --git a/drivers/net/can/dev.c b/drivers/net/can/dev.c index eab132778e67..1dbee1cb3df9 100644 --- a/drivers/net/can/dev.c +++ b/drivers/net/can/dev.c @@ -423,6 +423,34 @@ void can_put_echo_skb(struct sk_buff *skb, struct net_device *dev, } EXPORT_SYMBOL_GPL(can_put_echo_skb); +struct sk_buff *__can_get_echo_skb(struct net_device *dev, unsigned int idx, u8 *len_ptr) +{ + struct can_priv *priv = netdev_priv(dev); + struct sk_buff *skb = priv->echo_skb[idx]; + struct canfd_frame *cf; + + if (idx >= priv->echo_skb_max) { + netdev_err(dev, "%s: BUG! Trying to access can_priv::echo_skb out of bounds (%u/max %u)\n", + __func__, idx, priv->echo_skb_max); + return NULL; + } + + if (!skb) { + netdev_err(dev, "%s: BUG! Trying to echo non existing skb: can_priv::echo_skb[%u]\n", + __func__, idx); + return NULL; + } + + /* Using "struct canfd_frame::len" for the frame + * length is supported on both CAN and CANFD frames. + */ + cf = (struct canfd_frame *)skb->data; + *len_ptr = cf->len; + priv->echo_skb[idx] = NULL; + + return skb; +} + /* * Get the skb from the stack and loop it back locally * @@ -432,22 +460,16 @@ EXPORT_SYMBOL_GPL(can_put_echo_skb); */ unsigned int can_get_echo_skb(struct net_device *dev, unsigned int idx) { - struct can_priv *priv = netdev_priv(dev); - - BUG_ON(idx >= priv->echo_skb_max); - - if (priv->echo_skb[idx]) { - struct sk_buff *skb = priv->echo_skb[idx]; - struct can_frame *cf = (struct can_frame *)skb->data; - u8 dlc = cf->can_dlc; + struct sk_buff *skb; + u8 len; - netif_rx(priv->echo_skb[idx]); - priv->echo_skb[idx] = NULL; + skb = __can_get_echo_skb(dev, idx, &len); + if (!skb) + return 0; - return dlc; - } + netif_rx(skb); - return 0; + return len; } EXPORT_SYMBOL_GPL(can_get_echo_skb); diff --git a/drivers/net/ethernet/broadcom/genet/bcmmii.c b/drivers/net/ethernet/broadcom/genet/bcmmii.c index 4c73feca4842..0565efad6e6e 100644 --- a/drivers/net/ethernet/broadcom/genet/bcmmii.c +++ b/drivers/net/ethernet/broadcom/genet/bcmmii.c @@ -491,7 +491,7 @@ static int bcmgenet_mii_of_init(struct bcmgenet_priv *priv) if (!compat) return -ENOMEM; - priv->mdio_dn = of_find_compatible_node(dn, NULL, compat); + priv->mdio_dn = of_get_compatible_child(dn, compat); kfree(compat); if (!priv->mdio_dn) { dev_err(kdev, "unable to find MDIO bus node\n"); diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c index 4644357d291a..398068ad0b62 100644 --- a/drivers/net/wireless/ath/ath10k/mac.c +++ b/drivers/net/wireless/ath/ath10k/mac.c @@ -4470,7 +4470,9 @@ static int ath10k_add_interface(struct ieee80211_hw *hw, } ar->free_vdev_map &= ~(1LL << arvif->vdev_id); + spin_lock_bh(&ar->data_lock); list_add(&arvif->list, &ar->arvifs); + spin_unlock_bh(&ar->data_lock); /* It makes no sense to have firmware do keepalives. mac80211 already * takes care of this with idle connection polling. @@ -4603,7 +4605,9 @@ err_peer_delete: err_vdev_delete: ath10k_wmi_vdev_delete(ar, arvif->vdev_id); ar->free_vdev_map |= 1LL << arvif->vdev_id; + spin_lock_bh(&ar->data_lock); list_del(&arvif->list); + spin_unlock_bh(&ar->data_lock); err: if (arvif->beacon_buf) { @@ -4647,7 +4651,9 @@ static void ath10k_remove_interface(struct ieee80211_hw *hw, arvif->vdev_id, ret); ar->free_vdev_map |= 1LL << arvif->vdev_id; + spin_lock_bh(&ar->data_lock); list_del(&arvif->list); + spin_unlock_bh(&ar->data_lock); if (arvif->vdev_type == WMI_VDEV_TYPE_AP || arvif->vdev_type == WMI_VDEV_TYPE_IBSS) { diff --git a/drivers/net/wireless/cw1200/wsm.c b/drivers/net/wireless/cw1200/wsm.c index 3dd46c78c1cc..5a595f9f47ff 100644 --- a/drivers/net/wireless/cw1200/wsm.c +++ b/drivers/net/wireless/cw1200/wsm.c @@ -1805,16 +1805,18 @@ static int wsm_buf_reserve(struct wsm_buf *buf, size_t extra_size) { size_t pos = buf->data - buf->begin; size_t size = pos + extra_size; + u8 *tmp; size = round_up(size, FWLOAD_BLOCK_SIZE); - buf->begin = krealloc(buf->begin, size, GFP_KERNEL | GFP_DMA); - if (buf->begin) { - buf->data = &buf->begin[pos]; - buf->end = &buf->begin[size]; - return 0; - } else { - buf->end = buf->data = buf->begin; + tmp = krealloc(buf->begin, size, GFP_KERNEL | GFP_DMA); + if (!tmp) { + wsm_buf_deinit(buf); return -ENOMEM; } + + buf->begin = tmp; + buf->data = &buf->begin[pos]; + buf->end = &buf->begin[size]; + return 0; } diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c index 984cd2f05c4a..7b2a7d848a56 100644 --- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c +++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c @@ -322,8 +322,12 @@ struct ieee80211_regdomain *iwl_mvm_get_regdomain(struct wiphy *wiphy, goto out; } - if (changed) - *changed = (resp->status == MCC_RESP_NEW_CHAN_PROFILE); + if (changed) { + u32 status = le32_to_cpu(resp->status); + + *changed = (status == MCC_RESP_NEW_CHAN_PROFILE || + status == MCC_RESP_ILLEGAL); + } regd = iwl_parse_nvm_mcc_info(mvm->trans->dev, mvm->cfg, __le32_to_cpu(resp->n_channels), @@ -4050,10 +4054,6 @@ static void iwl_mvm_mac_sta_statistics(struct ieee80211_hw *hw, struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif); struct iwl_mvm_sta *mvmsta = iwl_mvm_sta_from_mac80211(sta); - if (!fw_has_capa(&mvm->fw->ucode_capa, - IWL_UCODE_TLV_CAPA_RADIO_BEACON_STATS)) - return; - /* if beacon filtering isn't on mac80211 does it anyway */ if (!(vif->driver_flags & IEEE80211_VIF_BEACON_FILTER)) return; diff --git a/drivers/net/wireless/iwlwifi/mvm/nvm.c b/drivers/net/wireless/iwlwifi/mvm/nvm.c index 2ee0f6fe56a1..5509c5024352 100644 --- a/drivers/net/wireless/iwlwifi/mvm/nvm.c +++ b/drivers/net/wireless/iwlwifi/mvm/nvm.c @@ -667,9 +667,8 @@ iwl_mvm_update_mcc(struct iwl_mvm *mvm, const char *alpha2, n_channels = __le32_to_cpu(mcc_resp->n_channels); IWL_DEBUG_LAR(mvm, - "MCC response status: 0x%x. new MCC: 0x%x ('%c%c') change: %d n_chans: %d\n", - status, mcc, mcc >> 8, mcc & 0xff, - !!(status == MCC_RESP_NEW_CHAN_PROFILE), n_channels); + "MCC response status: 0x%x. new MCC: 0x%x ('%c%c') n_chans: %d\n", + status, mcc, mcc >> 8, mcc & 0xff, n_channels); resp_len = sizeof(*mcc_resp) + n_channels * sizeof(__le32); resp_cp = kmemdup(mcc_resp, resp_len, GFP_KERNEL); diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c index 9a8982f581c5..1e074eaf613d 100644 --- a/drivers/net/wireless/mwifiex/cfg80211.c +++ b/drivers/net/wireless/mwifiex/cfg80211.c @@ -1150,6 +1150,12 @@ mwifiex_cfg80211_change_virtual_intf(struct wiphy *wiphy, priv->adapter->curr_iface_comb.p2p_intf--; priv->adapter->curr_iface_comb.sta_intf++; dev->ieee80211_ptr->iftype = type; + if (mwifiex_deinit_priv_params(priv)) + return -1; + if (mwifiex_init_new_priv_params(priv, dev, type)) + return -1; + if (mwifiex_sta_init_cmd(priv, false, false)) + return -1; break; case NL80211_IFTYPE_ADHOC: if (mwifiex_cfg80211_deinit_p2p(priv)) @@ -2839,8 +2845,10 @@ int mwifiex_del_virtual_intf(struct wiphy *wiphy, struct wireless_dev *wdev) mwifiex_stop_net_dev_queue(priv->netdev, adapter); - skb_queue_walk_safe(&priv->bypass_txq, skb, tmp) + skb_queue_walk_safe(&priv->bypass_txq, skb, tmp) { + skb_unlink(skb, &priv->bypass_txq); mwifiex_write_data_complete(priv->adapter, skb, 0, -1); + } if (netif_carrier_ok(priv->netdev)) netif_carrier_off(priv->netdev); diff --git a/drivers/net/wireless/mwifiex/wmm.c b/drivers/net/wireless/mwifiex/wmm.c index acccd6734e3b..ed8b69d1d65c 100644 --- a/drivers/net/wireless/mwifiex/wmm.c +++ b/drivers/net/wireless/mwifiex/wmm.c @@ -501,8 +501,10 @@ mwifiex_wmm_del_pkts_in_ralist_node(struct mwifiex_private *priv, struct mwifiex_adapter *adapter = priv->adapter; struct sk_buff *skb, *tmp; - skb_queue_walk_safe(&ra_list->skb_head, skb, tmp) + skb_queue_walk_safe(&ra_list->skb_head, skb, tmp) { + skb_unlink(skb, &ra_list->skb_head); mwifiex_write_data_complete(adapter, skb, 0, -1); + } } /* @@ -598,11 +600,15 @@ mwifiex_clean_txrx(struct mwifiex_private *priv) priv->adapter->if_ops.clean_pcie_ring(priv->adapter); spin_unlock_irqrestore(&priv->wmm.ra_list_spinlock, flags); - skb_queue_walk_safe(&priv->tdls_txq, skb, tmp) + skb_queue_walk_safe(&priv->tdls_txq, skb, tmp) { + skb_unlink(skb, &priv->tdls_txq); mwifiex_write_data_complete(priv->adapter, skb, 0, -1); + } - skb_queue_walk_safe(&priv->bypass_txq, skb, tmp) + skb_queue_walk_safe(&priv->bypass_txq, skb, tmp) { + skb_unlink(skb, &priv->bypass_txq); mwifiex_write_data_complete(priv->adapter, skb, 0, -1); + } atomic_set(&priv->adapter->bypass_tx_pending, 0); idr_for_each(&priv->ack_status_frames, mwifiex_free_ack_frame, NULL); diff --git a/drivers/nfc/nfcmrvl/uart.c b/drivers/nfc/nfcmrvl/uart.c index 6c0c301611c4..1b11ded79c4f 100644 --- a/drivers/nfc/nfcmrvl/uart.c +++ b/drivers/nfc/nfcmrvl/uart.c @@ -73,10 +73,9 @@ static int nfcmrvl_uart_parse_dt(struct device_node *node, struct device_node *matched_node; int ret; - matched_node = of_find_compatible_node(node, NULL, "marvell,nfc-uart"); + matched_node = of_get_compatible_child(node, "marvell,nfc-uart"); if (!matched_node) { - matched_node = of_find_compatible_node(node, NULL, - "mrvl,nfc-uart"); + matched_node = of_get_compatible_child(node, "mrvl,nfc-uart"); if (!matched_node) return -ENODEV; } diff --git a/drivers/of/base.c b/drivers/of/base.c index 31341290cd91..c6e019208d17 100644 --- a/drivers/of/base.c +++ b/drivers/of/base.c @@ -712,6 +712,31 @@ struct device_node *of_get_next_available_child(const struct device_node *node, } EXPORT_SYMBOL(of_get_next_available_child); +/** + * of_get_compatible_child - Find compatible child node + * @parent: parent node + * @compatible: compatible string + * + * Lookup child node whose compatible property contains the given compatible + * string. + * + * Returns a node pointer with refcount incremented, use of_node_put() on it + * when done; or NULL if not found. + */ +struct device_node *of_get_compatible_child(const struct device_node *parent, + const char *compatible) +{ + struct device_node *child; + + for_each_child_of_node(parent, child) { + if (of_device_is_compatible(child, compatible)) + break; + } + + return child; +} +EXPORT_SYMBOL(of_get_compatible_child); + /** * of_get_child_by_name - Find the child node by name for a given parent * @node: parent node diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 18b19744398a..ff5df33fc740 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -685,6 +685,11 @@ qla2xxx_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd) srb_t *sp; int rval; + if (unlikely(test_bit(UNLOADING, &base_vha->dpc_flags))) { + cmd->result = DID_NO_CONNECT << 16; + goto qc24_fail_command; + } + if (ha->flags.eeh_busy) { if (ha->flags.pci_channel_io_perm_failure) { ql_dbg(ql_dbg_aer, vha, 0x9010, diff --git a/drivers/scsi/ufs/ufs.h b/drivers/scsi/ufs/ufs.h index 42c459a9d3fe..ce5234555cc9 100644 --- a/drivers/scsi/ufs/ufs.h +++ b/drivers/scsi/ufs/ufs.h @@ -45,6 +45,7 @@ #define QUERY_DESC_MIN_SIZE 2 #define QUERY_OSF_SIZE (GENERAL_UPIU_REQUEST_SIZE - \ (sizeof(struct utp_upiu_header))) +#define RESPONSE_UPIU_SENSE_DATA_LENGTH 18 #define UPIU_HEADER_DWORD(byte3, byte2, byte1, byte0)\ cpu_to_be32((byte3 << 24) | (byte2 << 16) |\ @@ -383,7 +384,7 @@ struct utp_cmd_rsp { __be32 residual_transfer_count; __be32 reserved[4]; __be16 sense_data_len; - u8 sense_data[18]; + u8 sense_data[RESPONSE_UPIU_SENSE_DATA_LENGTH]; }; /** diff --git a/drivers/scsi/ufs/ufshcd-pci.c b/drivers/scsi/ufs/ufshcd-pci.c index d15eaa466c59..52b546fb509b 100644 --- a/drivers/scsi/ufs/ufshcd-pci.c +++ b/drivers/scsi/ufs/ufshcd-pci.c @@ -104,6 +104,7 @@ static void ufshcd_pci_remove(struct pci_dev *pdev) pm_runtime_forbid(&pdev->dev); pm_runtime_get_noresume(&pdev->dev); ufshcd_remove(hba); + ufshcd_dealloc_host(hba); } /** @@ -147,6 +148,7 @@ ufshcd_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) err = ufshcd_init(hba, mmio_base, pdev->irq); if (err) { dev_err(&pdev->dev, "Initialization failed\n"); + ufshcd_dealloc_host(hba); return err; } diff --git a/drivers/scsi/ufs/ufshcd-pltfrm.c b/drivers/scsi/ufs/ufshcd-pltfrm.c index 9714f2a8b329..f58abfcdfe81 100644 --- a/drivers/scsi/ufs/ufshcd-pltfrm.c +++ b/drivers/scsi/ufs/ufshcd-pltfrm.c @@ -161,7 +161,7 @@ static int ufshcd_populate_vreg(struct device *dev, const char *name, if (ret) { dev_err(dev, "%s: unable to find %s err %d\n", __func__, prop_name, ret); - goto out_free; + goto out; } vreg->min_uA = 0; @@ -183,9 +183,6 @@ static int ufshcd_populate_vreg(struct device *dev, const char *name, goto out; -out_free: - devm_kfree(dev, vreg); - vreg = NULL; out: if (!ret) *out_vreg = vreg; diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c index 8c58adadb728..c94d465de941 100644 --- a/drivers/scsi/ufs/ufshcd.c +++ b/drivers/scsi/ufs/ufshcd.c @@ -585,6 +585,21 @@ int ufshcd_hold(struct ufs_hba *hba, bool async) start: switch (hba->clk_gating.state) { case CLKS_ON: + /* + * Wait for the ungate work to complete if in progress. + * Though the clocks may be in ON state, the link could + * still be in hibner8 state if hibern8 is allowed + * during clock gating. + * Make sure we exit hibern8 state also in addition to + * clocks being ON. + */ + if (ufshcd_can_hibern8_during_gating(hba) && + ufshcd_is_link_hibern8(hba)) { + spin_unlock_irqrestore(hba->host->host_lock, flags); + flush_work(&hba->clk_gating.ungate_work); + spin_lock_irqsave(hba->host->host_lock, flags); + goto start; + } break; case REQ_CLKS_OFF: if (cancel_delayed_work(&hba->clk_gating.gate_work)) { @@ -813,10 +828,14 @@ static inline void ufshcd_copy_sense_data(struct ufshcd_lrb *lrbp) int len; if (lrbp->sense_buffer && ufshcd_get_rsp_upiu_data_seg_len(lrbp->ucd_rsp_ptr)) { + int len_to_copy; + len = be16_to_cpu(lrbp->ucd_rsp_ptr->sr.sense_data_len); + len_to_copy = min_t(int, RESPONSE_UPIU_SENSE_DATA_LENGTH, len); + memcpy(lrbp->sense_buffer, lrbp->ucd_rsp_ptr->sr.sense_data, - min_t(int, len, SCSI_SENSE_BUFFERSIZE)); + min_t(int, len_to_copy, SCSI_SENSE_BUFFERSIZE)); } } @@ -5251,7 +5270,10 @@ EXPORT_SYMBOL(ufshcd_system_suspend); int ufshcd_system_resume(struct ufs_hba *hba) { - if (!hba || !hba->is_powered || pm_runtime_suspended(hba->dev)) + if (!hba) + return -EINVAL; + + if (!hba->is_powered || pm_runtime_suspended(hba->dev)) /* * Let the runtime resume take care of resuming * if runtime suspended. @@ -5272,7 +5294,10 @@ EXPORT_SYMBOL(ufshcd_system_resume); */ int ufshcd_runtime_suspend(struct ufs_hba *hba) { - if (!hba || !hba->is_powered) + if (!hba) + return -EINVAL; + + if (!hba->is_powered) return 0; return ufshcd_suspend(hba, UFS_RUNTIME_PM); @@ -5302,10 +5327,13 @@ EXPORT_SYMBOL(ufshcd_runtime_suspend); */ int ufshcd_runtime_resume(struct ufs_hba *hba) { - if (!hba || !hba->is_powered) + if (!hba) + return -EINVAL; + + if (!hba->is_powered) return 0; - else - return ufshcd_resume(hba, UFS_RUNTIME_PM); + + return ufshcd_resume(hba, UFS_RUNTIME_PM); } EXPORT_SYMBOL(ufshcd_runtime_resume); @@ -5357,8 +5385,6 @@ void ufshcd_remove(struct ufs_hba *hba) ufshcd_disable_intr(hba, hba->intr_mask); ufshcd_hba_stop(hba); - scsi_host_put(hba->host); - ufshcd_exit_clk_gating(hba); if (ufshcd_is_clkscaling_enabled(hba)) devfreq_remove_device(hba->devfreq); @@ -5483,15 +5509,47 @@ static int ufshcd_devfreq_target(struct device *dev, { int err = 0; struct ufs_hba *hba = dev_get_drvdata(dev); + bool release_clk_hold = false; + unsigned long irq_flags; if (!ufshcd_is_clkscaling_enabled(hba)) return -EINVAL; + spin_lock_irqsave(hba->host->host_lock, irq_flags); + if (ufshcd_eh_in_progress(hba)) { + spin_unlock_irqrestore(hba->host->host_lock, irq_flags); + return 0; + } + + if (ufshcd_is_clkgating_allowed(hba) && + (hba->clk_gating.state != CLKS_ON)) { + if (cancel_delayed_work(&hba->clk_gating.gate_work)) { + /* hold the vote until the scaling work is completed */ + hba->clk_gating.active_reqs++; + release_clk_hold = true; + hba->clk_gating.state = CLKS_ON; + } else { + /* + * Clock gating work seems to be running in parallel + * hence skip scaling work to avoid deadlock between + * current scaling work and gating work. + */ + spin_unlock_irqrestore(hba->host->host_lock, irq_flags); + return 0; + } + } + spin_unlock_irqrestore(hba->host->host_lock, irq_flags); + if (*freq == UINT_MAX) err = ufshcd_scale_clks(hba, true); else if (*freq == 0) err = ufshcd_scale_clks(hba, false); + spin_lock_irqsave(hba->host->host_lock, irq_flags); + if (release_clk_hold) + __ufshcd_release(hba); + spin_unlock_irqrestore(hba->host->host_lock, irq_flags); + return err; } @@ -5673,7 +5731,6 @@ exit_gating: ufshcd_exit_clk_gating(hba); out_disable: hba->is_irq_enabled = false; - scsi_host_put(host); ufshcd_hba_exit(hba); out_error: return err; diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index b1ec202099b2..b74de014cef1 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -165,15 +165,29 @@ static inline int tty_put_user(struct tty_struct *tty, unsigned char x, return put_user(x, ptr); } +/* If we are not echoing the data, perhaps this is a secret so erase it */ +static inline void zero_buffer(struct tty_struct *tty, u8 *buffer, int size) +{ + bool icanon = !!L_ICANON(tty); + bool no_echo = !L_ECHO(tty); + + if (icanon && no_echo) + memset(buffer, 0x00, size); +} + static inline int tty_copy_to_user(struct tty_struct *tty, void __user *to, - const void *from, + void *from, unsigned long n) { struct n_tty_data *ldata = tty->disc_data; + int retval; tty_audit_add_data(tty, from, n, ldata->icanon); - return copy_to_user(to, from, n); + retval = copy_to_user(to, from, n); + if (!retval) + zero_buffer(tty, from, n); + return retval; } /** @@ -2005,6 +2019,7 @@ static int copy_from_read_buf(struct tty_struct *tty, is_eof = n == 1 && read_buf(ldata, tail) == EOF_CHAR(tty); tty_audit_add_data(tty, read_buf_addr(ldata, tail), n, ldata->icanon); + zero_buffer(tty, read_buf_addr(ldata, tail), n); smp_store_release(&ldata->read_tail, ldata->read_tail + n); /* Turn single EOF into zero-length read */ if (L_EXTPROC(tty) && ldata->icanon && is_eof && diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c index 8f3566cde3eb..355e9cad680d 100644 --- a/drivers/tty/tty_buffer.c +++ b/drivers/tty/tty_buffer.c @@ -454,6 +454,8 @@ receive_buf(struct tty_struct *tty, struct tty_buffer *head, int count) if (count && disc->ops->receive_buf) disc->ops->receive_buf(tty, p, f, count); } + if (count > 0) + memset(p, 0, count); return count; } diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 2facffea2ee0..f7af730aae82 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -2757,7 +2757,9 @@ static int hub_port_reset(struct usb_hub *hub, int port1, USB_PORT_FEAT_C_BH_PORT_RESET); usb_clear_port_feature(hub->hdev, port1, USB_PORT_FEAT_C_PORT_LINK_STATE); - usb_clear_port_feature(hub->hdev, port1, + + if (udev) + usb_clear_port_feature(hub->hdev, port1, USB_PORT_FEAT_C_CONNECTION); /* diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index aee29604bd79..5d21cd8359d4 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -744,7 +744,7 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd, status |= USB_PORT_STAT_SUSPEND; } if ((raw_port_status & PORT_PLS_MASK) == XDEV_RESUME && - !DEV_SUPERSPEED_ANY(raw_port_status)) { + !DEV_SUPERSPEED_ANY(raw_port_status) && hcd->speed < HCD_USB3) { if ((raw_port_status & PORT_RESET) || !(raw_port_status & PORT_PE)) return 0xffffffff; @@ -790,7 +790,7 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd, time_left = wait_for_completion_timeout( &bus_state->rexit_done[wIndex], msecs_to_jiffies( - XHCI_MAX_REXIT_TIMEOUT)); + XHCI_MAX_REXIT_TIMEOUT_MS)); spin_lock_irqsave(&xhci->lock, flags); if (time_left) { @@ -804,7 +804,7 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd, } else { int port_status = readl(port_array[wIndex]); xhci_warn(xhci, "Port resume took longer than %i msec, port status = 0x%x\n", - XHCI_MAX_REXIT_TIMEOUT, + XHCI_MAX_REXIT_TIMEOUT_MS, port_status); status |= USB_PORT_STAT_SUSPEND; clear_bit(wIndex, &bus_state->rexit_ports); @@ -1298,13 +1298,16 @@ int xhci_bus_suspend(struct usb_hcd *hcd) __le32 __iomem **port_array; struct xhci_bus_state *bus_state; unsigned long flags; + u32 portsc_buf[USB_MAXCHILDREN]; + bool wake_enabled; max_ports = xhci_get_ports(hcd, &port_array); bus_state = &xhci->bus_state[hcd_index(hcd)]; + wake_enabled = hcd->self.root_hub->do_remote_wakeup; spin_lock_irqsave(&xhci->lock, flags); - if (hcd->self.root_hub->do_remote_wakeup) { + if (wake_enabled) { if (bus_state->resuming_ports || /* USB2 */ bus_state->port_remote_wakeup) { /* USB3 */ spin_unlock_irqrestore(&xhci->lock, flags); @@ -1312,26 +1315,36 @@ int xhci_bus_suspend(struct usb_hcd *hcd) return -EBUSY; } } - - port_index = max_ports; + /* + * Prepare ports for suspend, but don't write anything before all ports + * are checked and we know bus suspend can proceed + */ bus_state->bus_suspended = 0; + port_index = max_ports; while (port_index--) { - /* suspend the port if the port is not suspended */ u32 t1, t2; - int slot_id; t1 = readl(port_array[port_index]); t2 = xhci_port_state_to_neutral(t1); + portsc_buf[port_index] = 0; - if ((t1 & PORT_PE) && !(t1 & PORT_PLS_MASK)) { - xhci_dbg(xhci, "port %d not suspended\n", port_index); - slot_id = xhci_find_slot_id_by_port(hcd, xhci, - port_index + 1); - if (slot_id) { + /* Bail out if a USB3 port has a new device in link training */ + if ((t1 & PORT_PLS_MASK) == XDEV_POLLING) { + bus_state->bus_suspended = 0; + spin_unlock_irqrestore(&xhci->lock, flags); + xhci_dbg(xhci, "Bus suspend bailout, port in polling\n"); + return -EBUSY; + } + + /* suspend ports in U0, or bail out for new connect changes */ + if ((t1 & PORT_PE) && (t1 & PORT_PLS_MASK) == XDEV_U0) { + if ((t1 & PORT_CSC) && wake_enabled) { + bus_state->bus_suspended = 0; spin_unlock_irqrestore(&xhci->lock, flags); - xhci_stop_device(xhci, slot_id, 1); - spin_lock_irqsave(&xhci->lock, flags); + xhci_dbg(xhci, "Bus suspend bailout, port connect change\n"); + return -EBUSY; } + xhci_dbg(xhci, "port %d not suspended\n", port_index); t2 &= ~PORT_PLS_MASK; t2 |= PORT_LINK_STROBE | XDEV_U3; set_bit(port_index, &bus_state->bus_suspended); @@ -1340,7 +1353,7 @@ int xhci_bus_suspend(struct usb_hcd *hcd) * including the USB 3.0 roothub, but only if CONFIG_PM * is enabled, so also enable remote wake here. */ - if (hcd->self.root_hub->do_remote_wakeup) { + if (wake_enabled) { if (t1 & PORT_CONNECT) { t2 |= PORT_WKOC_E | PORT_WKDISC_E; t2 &= ~PORT_WKCONN_E; @@ -1353,7 +1366,26 @@ int xhci_bus_suspend(struct usb_hcd *hcd) t1 = xhci_port_state_to_neutral(t1); if (t1 != t2) - writel(t2, port_array[port_index]); + portsc_buf[port_index] = t2; + } + + /* write port settings, stopping and suspending ports if needed */ + port_index = max_ports; + while (port_index--) { + if (!portsc_buf[port_index]) + continue; + if (test_bit(port_index, &bus_state->bus_suspended)) { + int slot_id; + + slot_id = xhci_find_slot_id_by_port(hcd, xhci, + port_index + 1); + if (slot_id) { + spin_unlock_irqrestore(&xhci->lock, flags); + xhci_stop_device(xhci, slot_id, 1); + spin_lock_irqsave(&xhci->lock, flags); + } + } + writel(portsc_buf[port_index], port_array[port_index]); } hcd->state = HC_STATE_SUSPENDED; bus_state->next_statechange = jiffies + msecs_to_jiffies(10); diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index ece0787d62bf..845fa426fa0d 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -1673,7 +1673,7 @@ static void handle_port_status(struct xhci_hcd *xhci, * RExit to a disconnect state). If so, let the the driver know it's * out of the RExit state. */ - if (!DEV_SUPERSPEED_ANY(temp) && + if (!DEV_SUPERSPEED_ANY(temp) && hcd->speed < HCD_USB3 && test_and_clear_bit(faked_port_index, &bus_state->rexit_ports)) { complete(&bus_state->rexit_done[faked_port_index]); diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 84d8871755b7..0635cea42e6f 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1490,7 +1490,7 @@ struct xhci_bus_state { * It can take up to 20 ms to transition from RExit to U0 on the * Intel Lynx Point LP xHCI host. */ -#define XHCI_MAX_REXIT_TIMEOUT (20 * 1000) +#define XHCI_MAX_REXIT_TIMEOUT_MS 20 static inline unsigned int hcd_index(struct usb_hcd *hcd) { diff --git a/fs/9p/vfs_dir.c b/fs/9p/vfs_dir.c index 5cc00e56206e..7d889f56b8e7 100644 --- a/fs/9p/vfs_dir.c +++ b/fs/9p/vfs_dir.c @@ -76,15 +76,6 @@ static inline int dt_type(struct p9_wstat *mistat) return rettype; } -static void p9stat_init(struct p9_wstat *stbuf) -{ - stbuf->name = NULL; - stbuf->uid = NULL; - stbuf->gid = NULL; - stbuf->muid = NULL; - stbuf->extension = NULL; -} - /** * v9fs_alloc_rdir_buf - Allocate buffer used for read and readdir * @filp: opened file structure @@ -145,12 +136,10 @@ static int v9fs_dir_readdir(struct file *file, struct dir_context *ctx) rdir->tail = n; } while (rdir->head < rdir->tail) { - p9stat_init(&st); err = p9stat_read(fid->clnt, rdir->buf + rdir->head, rdir->tail - rdir->head, &st); if (err) { p9_debug(P9_DEBUG_VFS, "returned %d\n", err); - p9stat_free(&st); return -EIO; } reclen = st.size+2; diff --git a/fs/bfs/inode.c b/fs/bfs/inode.c index fdcb4d69f430..4714c55c1ae5 100644 --- a/fs/bfs/inode.c +++ b/fs/bfs/inode.c @@ -350,7 +350,8 @@ static int bfs_fill_super(struct super_block *s, void *data, int silent) s->s_magic = BFS_MAGIC; - if (le32_to_cpu(bfs_sb->s_start) > le32_to_cpu(bfs_sb->s_end)) { + if (le32_to_cpu(bfs_sb->s_start) > le32_to_cpu(bfs_sb->s_end) || + le32_to_cpu(bfs_sb->s_start) < BFS_BSIZE) { printf("Superblock is corrupted\n"); goto out1; } @@ -359,9 +360,11 @@ static int bfs_fill_super(struct super_block *s, void *data, int silent) sizeof(struct bfs_inode) + BFS_ROOT_INO - 1; imap_len = (info->si_lasti / 8) + 1; - info->si_imap = kzalloc(imap_len, GFP_KERNEL); - if (!info->si_imap) + info->si_imap = kzalloc(imap_len, GFP_KERNEL | __GFP_NOWARN); + if (!info->si_imap) { + printf("Cannot allocate %u bytes\n", imap_len); goto out1; + } for (i = 0; i < BFS_ROOT_INO; i++) set_bit(i, info->si_imap); diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 80cd28456f08..13ff0fdae03e 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -10708,17 +10708,9 @@ int btrfs_trim_fs(struct btrfs_root *root, struct fstrim_range *range) u64 start; u64 end; u64 trimmed = 0; - u64 total_bytes = btrfs_super_total_bytes(fs_info->super_copy); int ret = 0; - /* - * try to trim all FS space, our block group may start from non-zero. - */ - if (range->len == total_bytes) - cache = btrfs_lookup_first_block_group(fs_info, range->start); - else - cache = btrfs_lookup_block_group(fs_info, range->start); - + cache = btrfs_lookup_first_block_group(fs_info, range->start); while (cache) { if (cache->key.objectid >= (range->start + range->len)) { btrfs_put_block_group(cache); diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index 150d3c891815..3379490ce54d 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -378,7 +378,6 @@ static noinline int btrfs_ioctl_fitrim(struct file *file, void __user *arg) struct fstrim_range range; u64 minlen = ULLONG_MAX; u64 num_devices = 0; - u64 total_bytes = btrfs_super_total_bytes(fs_info->super_copy); int ret; if (!capable(CAP_SYS_ADMIN)) @@ -402,11 +401,15 @@ static noinline int btrfs_ioctl_fitrim(struct file *file, void __user *arg) return -EOPNOTSUPP; if (copy_from_user(&range, arg, sizeof(range))) return -EFAULT; - if (range.start > total_bytes || - range.len < fs_info->sb->s_blocksize) + + /* + * NOTE: Don't truncate the range using super->total_bytes. Bytenr of + * block group is in the logical address space, which can be any + * sectorsize aligned bytenr in the range [0, U64_MAX]. + */ + if (range.len < fs_info->sb->s_blocksize) return -EINVAL; - range.len = min(range.len, total_bytes - range.start); range.minlen = max(range.minlen, minlen); ret = btrfs_trim_fs(fs_info->tree_root, &range); if (ret < 0) diff --git a/fs/gfs2/ops_fstype.c b/fs/gfs2/ops_fstype.c index d9178388cf48..de7143e2b361 100644 --- a/fs/gfs2/ops_fstype.c +++ b/fs/gfs2/ops_fstype.c @@ -71,13 +71,13 @@ static struct gfs2_sbd *init_sbd(struct super_block *sb) if (!sdp) return NULL; - sb->s_fs_info = sdp; sdp->sd_vfs = sb; sdp->sd_lkstats = alloc_percpu(struct gfs2_pcpu_lkstats); if (!sdp->sd_lkstats) { kfree(sdp); return NULL; } + sb->s_fs_info = sdp; set_bit(SDF_NOJOURNALID, &sdp->sd_flags); gfs2_tune_init(&sdp->sd_tune); diff --git a/fs/namei.c b/fs/namei.c index de57dd59d95f..40049d61ef37 100644 --- a/fs/namei.c +++ b/fs/namei.c @@ -869,6 +869,8 @@ static inline void put_link(struct nameidata *nd) int sysctl_protected_symlinks __read_mostly = 0; int sysctl_protected_hardlinks __read_mostly = 0; +int sysctl_protected_fifos __read_mostly; +int sysctl_protected_regular __read_mostly; /** * may_follow_link - Check symlink following for unsafe situations @@ -982,6 +984,45 @@ static int may_linkat(struct path *link) return -EPERM; } +/** + * may_create_in_sticky - Check whether an O_CREAT open in a sticky directory + * should be allowed, or not, on files that already + * exist. + * @dir: the sticky parent directory + * @inode: the inode of the file to open + * + * Block an O_CREAT open of a FIFO (or a regular file) when: + * - sysctl_protected_fifos (or sysctl_protected_regular) is enabled + * - the file already exists + * - we are in a sticky directory + * - we don't own the file + * - the owner of the directory doesn't own the file + * - the directory is world writable + * If the sysctl_protected_fifos (or sysctl_protected_regular) is set to 2 + * the directory doesn't have to be world writable: being group writable will + * be enough. + * + * Returns 0 if the open is allowed, -ve on error. + */ +static int may_create_in_sticky(struct dentry * const dir, + struct inode * const inode) +{ + if ((!sysctl_protected_fifos && S_ISFIFO(inode->i_mode)) || + (!sysctl_protected_regular && S_ISREG(inode->i_mode)) || + likely(!(dir->d_inode->i_mode & S_ISVTX)) || + uid_eq(inode->i_uid, dir->d_inode->i_uid) || + uid_eq(current_fsuid(), inode->i_uid)) + return 0; + + if (likely(dir->d_inode->i_mode & 0002) || + (dir->d_inode->i_mode & 0020 && + ((sysctl_protected_fifos >= 2 && S_ISFIFO(inode->i_mode)) || + (sysctl_protected_regular >= 2 && S_ISREG(inode->i_mode))))) { + return -EACCES; + } + return 0; +} + static __always_inline const char *get_link(struct nameidata *nd) { @@ -3166,9 +3207,15 @@ finish_open: error = -ELOOP; goto out; } - error = -EISDIR; - if ((open_flag & O_CREAT) && d_is_dir(nd->path.dentry)) - goto out; + if (open_flag & O_CREAT) { + error = -EISDIR; + if (d_is_dir(nd->path.dentry)) + goto out; + error = may_create_in_sticky(dir, + d_backing_inode(nd->path.dentry)); + if (unlikely(error)) + goto out; + } error = -ENOTDIR; if ((nd->flags & LOOKUP_DIRECTORY) && !d_can_lookup(nd->path.dentry)) goto out; diff --git a/include/linux/can/dev.h b/include/linux/can/dev.h index 5f5270941ba0..f7178f44825b 100644 --- a/include/linux/can/dev.h +++ b/include/linux/can/dev.h @@ -154,6 +154,7 @@ void can_change_state(struct net_device *dev, struct can_frame *cf, void can_put_echo_skb(struct sk_buff *skb, struct net_device *dev, unsigned int idx); +struct sk_buff *__can_get_echo_skb(struct net_device *dev, unsigned int idx, u8 *len_ptr); unsigned int can_get_echo_skb(struct net_device *dev, unsigned int idx); void can_free_echo_skb(struct net_device *dev, unsigned int idx); diff --git a/include/linux/fs.h b/include/linux/fs.h index 240cbaee819f..13277d2715df 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -65,6 +65,8 @@ extern struct inodes_stat_t inodes_stat; extern int leases_enable, lease_break_time; extern int sysctl_protected_symlinks; extern int sysctl_protected_hardlinks; +extern int sysctl_protected_fifos; +extern int sysctl_protected_regular; struct buffer_head; typedef int (get_block_t)(struct inode *inode, sector_t iblock, diff --git a/include/linux/of.h b/include/linux/of.h index dd10626a615f..d9371c9cd88a 100644 --- a/include/linux/of.h +++ b/include/linux/of.h @@ -265,6 +265,8 @@ extern struct device_node *of_get_next_child(const struct device_node *node, extern struct device_node *of_get_next_available_child( const struct device_node *node, struct device_node *prev); +extern struct device_node *of_get_compatible_child(const struct device_node *parent, + const char *compatible); extern struct device_node *of_get_child_by_name(const struct device_node *node, const char *name); @@ -462,6 +464,12 @@ static inline bool of_have_populated_dt(void) return false; } +static inline struct device_node *of_get_compatible_child(const struct device_node *parent, + const char *compatible) +{ + return NULL; +} + static inline struct device_node *of_get_child_by_name( const struct device_node *node, const char *name) diff --git a/kernel/debug/kdb/kdb_io.c b/kernel/debug/kdb/kdb_io.c index 77777d918676..cc892a9e109d 100644 --- a/kernel/debug/kdb/kdb_io.c +++ b/kernel/debug/kdb/kdb_io.c @@ -215,7 +215,7 @@ static char *kdb_read(char *buffer, size_t bufsize) int count; int i; int diag, dtab_count; - int key; + int key, buf_size, ret; diag = kdbgetintenv("DTABCOUNT", &dtab_count); @@ -335,9 +335,8 @@ poll_again: else p_tmp = tmpbuffer; len = strlen(p_tmp); - count = kallsyms_symbol_complete(p_tmp, - sizeof(tmpbuffer) - - (p_tmp - tmpbuffer)); + buf_size = sizeof(tmpbuffer) - (p_tmp - tmpbuffer); + count = kallsyms_symbol_complete(p_tmp, buf_size); if (tab == 2 && count > 0) { kdb_printf("\n%d symbols are found.", count); if (count > dtab_count) { @@ -349,9 +348,13 @@ poll_again: } kdb_printf("\n"); for (i = 0; i < count; i++) { - if (WARN_ON(!kallsyms_symbol_next(p_tmp, i))) + ret = kallsyms_symbol_next(p_tmp, i, buf_size); + if (WARN_ON(!ret)) break; - kdb_printf("%s ", p_tmp); + if (ret != -E2BIG) + kdb_printf("%s ", p_tmp); + else + kdb_printf("%s... ", p_tmp); *(p_tmp + len) = '\0'; } if (i >= dtab_count) diff --git a/kernel/debug/kdb/kdb_private.h b/kernel/debug/kdb/kdb_private.h index 75014d7f4568..533e04e75a9c 100644 --- a/kernel/debug/kdb/kdb_private.h +++ b/kernel/debug/kdb/kdb_private.h @@ -83,7 +83,7 @@ typedef struct __ksymtab { unsigned long sym_start; unsigned long sym_end; } kdb_symtab_t; -extern int kallsyms_symbol_next(char *prefix_name, int flag); +extern int kallsyms_symbol_next(char *prefix_name, int flag, int buf_size); extern int kallsyms_symbol_complete(char *prefix_name, int max_len); /* Exported Symbols for kernel loadable modules to use. */ diff --git a/kernel/debug/kdb/kdb_support.c b/kernel/debug/kdb/kdb_support.c index d35cc2d3a4cc..2aed4a33521b 100644 --- a/kernel/debug/kdb/kdb_support.c +++ b/kernel/debug/kdb/kdb_support.c @@ -221,11 +221,13 @@ int kallsyms_symbol_complete(char *prefix_name, int max_len) * Parameters: * prefix_name prefix of a symbol name to lookup * flag 0 means search from the head, 1 means continue search. + * buf_size maximum length that can be written to prefix_name + * buffer * Returns: * 1 if a symbol matches the given prefix. * 0 if no string found */ -int kallsyms_symbol_next(char *prefix_name, int flag) +int kallsyms_symbol_next(char *prefix_name, int flag, int buf_size) { int prefix_len = strlen(prefix_name); static loff_t pos; @@ -235,10 +237,8 @@ int kallsyms_symbol_next(char *prefix_name, int flag) pos = 0; while ((name = kdb_walk_kallsyms(&pos))) { - if (strncmp(name, prefix_name, prefix_len) == 0) { - strncpy(prefix_name, name, strlen(name)+1); - return 1; - } + if (!strncmp(name, prefix_name, prefix_len)) + return strscpy(prefix_name, name, buf_size); } return 0; } diff --git a/kernel/sched/core.c b/kernel/sched/core.c index 4743e1f2a3d1..d0618951014b 100644 --- a/kernel/sched/core.c +++ b/kernel/sched/core.c @@ -3822,8 +3822,8 @@ static int __sched_setscheduler(struct task_struct *p, struct rq *rq; int reset_on_fork; - /* may grab non-irq protected spin_locks */ - BUG_ON(in_interrupt()); + /* The pi code expects interrupts enabled */ + BUG_ON(pi && in_interrupt()); recheck: /* double check policy once rq lock held */ if (policy < 0) { diff --git a/kernel/sysctl.c b/kernel/sysctl.c index 66100d1bc3f7..7e832f9a8f42 100644 --- a/kernel/sysctl.c +++ b/kernel/sysctl.c @@ -1715,6 +1715,24 @@ static struct ctl_table fs_table[] = { .extra1 = &zero, .extra2 = &one, }, + { + .procname = "protected_fifos", + .data = &sysctl_protected_fifos, + .maxlen = sizeof(int), + .mode = 0600, + .proc_handler = proc_dointvec_minmax, + .extra1 = &zero, + .extra2 = &two, + }, + { + .procname = "protected_regular", + .data = &sysctl_protected_regular, + .maxlen = sizeof(int), + .mode = 0600, + .proc_handler = proc_dointvec_minmax, + .extra1 = &zero, + .extra2 = &two, + }, { .procname = "suid_dumpable", .data = &suid_dumpable, diff --git a/mm/shmem.c b/mm/shmem.c index 8e506a45a6ef..d902b413941a 100644 --- a/mm/shmem.c +++ b/mm/shmem.c @@ -1818,9 +1818,7 @@ static loff_t shmem_file_llseek(struct file *file, loff_t offset, int whence) mutex_lock(&inode->i_mutex); /* We're holding i_mutex so we can access i_size directly */ - if (offset < 0) - offset = -EINVAL; - else if (offset >= inode->i_size) + if (offset < 0 || offset >= inode->i_size) offset = -ENXIO; else { start = offset >> PAGE_CACHE_SHIFT; diff --git a/net/llc/af_llc.c b/net/llc/af_llc.c index 83e8a295c806..c153fc2883a8 100644 --- a/net/llc/af_llc.c +++ b/net/llc/af_llc.c @@ -726,7 +726,6 @@ static int llc_ui_recvmsg(struct socket *sock, struct msghdr *msg, size_t len, struct sk_buff *skb = NULL; struct sock *sk = sock->sk; struct llc_sock *llc = llc_sk(sk); - unsigned long cpu_flags; size_t copied = 0; u32 peek_seq = 0; u32 *seq, skb_len; @@ -851,9 +850,8 @@ static int llc_ui_recvmsg(struct socket *sock, struct msghdr *msg, size_t len, goto copy_uaddr; if (!(flags & MSG_PEEK)) { - spin_lock_irqsave(&sk->sk_receive_queue.lock, cpu_flags); - sk_eat_skb(sk, skb); - spin_unlock_irqrestore(&sk->sk_receive_queue.lock, cpu_flags); + skb_unlink(skb, &sk->sk_receive_queue); + kfree_skb(skb); *seq = 0; } @@ -874,9 +872,8 @@ copy_uaddr: llc_cmsg_rcv(msg, skb); if (!(flags & MSG_PEEK)) { - spin_lock_irqsave(&sk->sk_receive_queue.lock, cpu_flags); - sk_eat_skb(sk, skb); - spin_unlock_irqrestore(&sk->sk_receive_queue.lock, cpu_flags); + skb_unlink(skb, &sk->sk_receive_queue); + kfree_skb(skb); *seq = 0; } diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c index 120e9ae04db3..a7967af0da82 100644 --- a/net/netfilter/nf_tables_api.c +++ b/net/netfilter/nf_tables_api.c @@ -3452,6 +3452,7 @@ static int nft_add_set_elem(struct nft_ctx *ctx, struct nft_set *set, dreg = nft_type_to_reg(set->dtype); list_for_each_entry(binding, &set->bindings, list) { struct nft_ctx bind_ctx = { + .net = ctx->net, .afi = ctx->afi, .table = ctx->table, .chain = (struct nft_chain *)binding->chain, diff --git a/net/sctp/associola.c b/net/sctp/associola.c index a40b8b0ef0d5..f085b01b6603 100644 --- a/net/sctp/associola.c +++ b/net/sctp/associola.c @@ -486,8 +486,9 @@ void sctp_assoc_set_primary(struct sctp_association *asoc, void sctp_assoc_rm_peer(struct sctp_association *asoc, struct sctp_transport *peer) { - struct list_head *pos; - struct sctp_transport *transport; + struct sctp_transport *transport; + struct list_head *pos; + struct sctp_chunk *ch; pr_debug("%s: association:%p addr:%pISpc\n", __func__, asoc, &peer->ipaddr.sa); @@ -543,7 +544,6 @@ void sctp_assoc_rm_peer(struct sctp_association *asoc, */ if (!list_empty(&peer->transmitted)) { struct sctp_transport *active = asoc->peer.active_path; - struct sctp_chunk *ch; /* Reset the transport of each chunk on this list */ list_for_each_entry(ch, &peer->transmitted, @@ -565,6 +565,10 @@ void sctp_assoc_rm_peer(struct sctp_association *asoc, sctp_transport_hold(active); } + list_for_each_entry(ch, &asoc->outqueue.out_chunk_list, list) + if (ch->transport == peer) + ch->transport = NULL; + asoc->peer.transport_count--; sctp_transport_free(peer); diff --git a/net/sunrpc/auth_generic.c b/net/sunrpc/auth_generic.c index 41248b1820c7..cc27e38392ea 100644 --- a/net/sunrpc/auth_generic.c +++ b/net/sunrpc/auth_generic.c @@ -272,13 +272,7 @@ static bool generic_key_to_expire(struct rpc_cred *cred) { struct auth_cred *acred = &container_of(cred, struct generic_cred, gc_base)->acred; - bool ret; - - get_rpccred(cred); - ret = test_bit(RPC_CRED_KEY_EXPIRE_SOON, &acred->ac_flags); - put_rpccred(cred); - - return ret; + return test_bit(RPC_CRED_KEY_EXPIRE_SOON, &acred->ac_flags); } static const struct rpc_credops generic_credops = {