[folders]
# DISTFILES_DIR
# Define a dir to store distfiles
# Default:
# distfiles_dir=/usr/portage/distfiles
distfiles_dir=./distfiles

# SEGMENTS_DIR
# Define a dir to store distfiles' segments
# Default:
# segments_dir=/tmp/seggetd/segments
#segments_dir=./tmp

[pkg_list]
# PKG_LIST_DIR
# Define a dir with pkg.list file
# Default:
# pkg_list_dir=./
pkg_list_dir=./

# SYNOPSIS: del_pkg_list_when_dld_finished=0 | 1
# - If del_pkg_list_when_dld_finished set to 1:
# Segget deletes pkg.list file, after all distfiles were successfuly fetched.
# Default:
# del_pkg_list_when_dld_finished=1
del_pkg_list_when_dld_finished=1

[portage]
# SYNOPSIS: fetch_only=0 | 1
# NOT IMPLEMENTED YET: fetch_only=0

[distfiles]
# MAX_CONNECTION_NUM_PER_DISTFILE
# Each distfile can have up to max_connection_num_per_distfile simultaneous
# connections.
# Minimum value: 1
# Maximum value: 20
# Default:
# max_connection_num_per_distfile=3
max_connection_num_per_distfile=3

[segments]
# MAX_SEGMENT_SIZE
# Define maximum segment size in bytes.
# Minimum value: 10000
# Maximum value: 10000000
# Default:
# max_segment_size=500000
max_segment_size=500000

# SYNOPSIS: resume_on=0 | 1
# - If resume_on set to 1:
# Before starting downloading a segment segget checks whether this segment is 
# already downloaded, checks segments size and if size mathces considers this 
# segment to be downloaded and skips downloading process.
# - If resume_on set to 0:
# Segget always starts new fetch for a segment regardless of the fact whether it
# is downloaded or not.
# Default:
# resume_on=1
resume_on=1

# MAX_TRIES
# If segment download was unsuccessful, new attempts are made. When attempts
# number reaches max_tries, segment gets FAILED status and error logged to error_log
# Minimum value: 1
# Maximum value: -1 (for no limit)
# Default:
# max_tries=10
max_tries=10

[connections]
# MAX_CONNECTIONS
# Define maximum number of connections
# Minimum value: 1
# Maximum value: 20
# Default:
# max_connections=10
max_connections=10

# CURRENT_SPEED_TIME_INTERVAL_MSECS
# segget transfers may have bursty nature of their traffic. Therefore, while
# measuring current speed, segget actually calculates average speed during
# current_speed_time_interval_msecs time interval, defined in milliseconds.
# Minimum value: 100
# Maximum value: 60000
# Default:
# current_speed_time_interval_msecs=1000
current_speed_time_interval_msecs=1000

# NOT IMPLEMENTED YET: max_total_speed=50000

[mirrors]
# MAX_CONNECTIONS_NUM_PER_MIRROR
# Define how many simultaneous downloads from one mirror segget is allowed to 
# have. While choosing a mirror segget will skip mirrors with 
# max_connections_num_per_mirror active downloads.
# Minimum value: 1
# Maximum value: 10
# Default:
# max_connections_num_per_mirror=1
max_connections_num_per_mirror=1

# SYNOPSIS: collect_benchmark_stats_on=0 | 1
# - If set to 1, stats on mirrors performance will be collected.
# default:
# collect_benchmark_stats_on=1 (Note: at the moment can NOT be changed)
collect_benchmark_stats_on=1

# SYNOPSIS: use_benchmark_stats=0 | 1
# If use_benchmark_stats=1 statistics on mirrors is used to rate them 
# and therefore improve performance.
# Each time connection from a particular mirror closes mirror->dld_time, 
# and mirror->dld_size get increased (in case of unsuccessful connection
# only time gets increased), so avg speed for a mirror can be
# calculated:
# 
#           mirror->avg_speed=mirror->dld_size/mirror->dld_time.       (1)
#
# When new segment is going to be started segget goes through the list of
# the mirrors distfile/segment has, and asks each mirror for self_rating:
#
#          "ulong self_rating=mirror->mirror_on_the_wall();". 
#
# This way segget chooses a mirror with the best self_rating. To calculate 
# self_rating mirrors use the following formula:
#
#               self_rating=dld_time/dld_size*honesty.                 (2)
#
# So mirrors actually say how bad they are.
# Even mirrors can have critical times, so to give mirrors another chance 
# honesty was added to the formula (2). honesty can get values in 
# interval (0,1]. Each time connection from a mirror opens or closes mirror
# sets its honesty=1. If mirror was asked for self_evaluation with 
# mirror->mirror_on_the_wall(), but wasn't chosen its honesty decreases
# somewhat (see [mirror].benchmark_oblivion option), so next time it will 
# lie little bit more about how bad it's.
# Default:
# use_benchmark_results=1
# ***Note: at the moment use_benchmark_results can NOT be set to 0
use_benchmark_stats=1

# BENCHMARK_OBLIVION
# benchmark_oblivion option allows to adjust how fast segget "forgets" 
# benchmarking statistics on mirrors performance. 
# Each time mirror->mirror_on_the_wall() called, mirror decreases its
# honesty (to have more chances next time) using the following formula:
#
#       honesty=honesty*100/(100+settings.benchmark_oblivion)         (3)
#
# Therefore, setting benchmark_oblivion=100 will make mirror look twice
# less bad next time mirror->mirror_on_the_wall() called.
# Minimum value: 0 (Beware: setting to 0, will can exclude unlucky mirrors)
# Maximum value: 1000
# Default:
# benchmark_oblivion=5
benchmark_oblivion=5

[provide_mirror_to_others]
# PROVIDE_MIRROR_DIR
# Define a dir for making symlinks to downloaded distfiles. This dir can be 
# used to provide local mirror for other hosts (with help of Apache, vsftp, etc).
# If set to none, segget will not make symlinks.
# Default:
# provide_mirror_dir=none
provide_mirror_dir=./provide_mirror_dir

# SYNOPSIS: PROVIDE_MIRROR_FILES_RESTRICT_LIST_ON= 0 | 1
# If PROVIDE_MIRROR_DIR=none this option will be ignored.
# - If set to 1, segget will compare distfile name with the list of forbiden 
# patterns from the restricted.conf file. If distfile name contains any of the 
# patterns, no symlink will be provided to this distfile.
# Default:
# provide_mirror_files_restrict_list_on=0
provide_mirror_files_restrict_list_on=0

# PROVIDE_MIRROR_TO_OTHERS_URL
# Specify url to the provided mirror.
# This option is used to generate rss feed.
# By default UI_IP is used for this.
# Default: 
# provide_mirror_to_others_url=ui_ip
provide_mirror_to_others_url=ui_ip

[provide_proxy_fetcher_to_others]
# PROVIDE_PROXY_FETCHER_IP
# Define an ip address segget will use to provide access for tuiclients.
# The parameter should be a string holding your host dotted IP address.
# Default:
# provide_proxy_fetcher_ip=none
provide_proxy_fetcher_ip=127.0.0.1

# PROVIDE_PROXY_FETCHER_PORT
# Define a port segget will use to provide access for tuiclients.
# The parameter should be an integer.
# Minimum value: 1
# Maximum value: 65535
# Default:
# provide_proxy_fetcher_port=3131
provide_proxy_fetcher_port=3130

[networks]
# NETWORK0_PRIORITY
# Define priority as a value in range from lowest 0 to highest 10.
# Segget tries to use networks with higher priority levels first, and in case of 
# failure will switch to networks with lower priority levels.
# Segget will NOT use network if its priority level set to 0. Therefore at least
# one network must have priority level higher than 0.
# Networks with local mirrors usually would have higher priority than that of 
# networks with remote mirrors.
# Segget can have up to 10 networks (from network0 to network9).
# Settings for each network should be defined in network#.conf file, where 
# instead of # should be network number. For network0 it's network0.conf
# Default:
# network0_priority=10
# network1_priority=0
# network2_priority=0
# network3_priority=0
# network4_priority=0
# network5_priority=0
# network6_priority=0
# network7_priority=0
# network8_priority=0
# network9_priority=0
network0_priority=10
network1_priority=0
network2_priority=0
network3_priority=0
network4_priority=0
network5_priority=0
network6_priority=0
network7_priority=0
network8_priority=0
network9_priority=0

[schedule]

[user-data]
# USER_AGENT
# Set the User-Agent: header in the http request sent to the remote server. 
# This can be used to fool servers or scripts.
# Default:
# user_agent=segget
user_agent=segget

# Specify the user and password for authentication on a ftp servers.
# NOT IMPLEMENTED YET: ftp-user=anonymous
# NOT IMPLEMENTED YET: ftp-password=me@mail.ru

[ui_server]
# tuiclient monitors segget's activity by establishing tcp connection
# with segget daemon (ui_server part of it).
# Same ip and port are used for WebUI which can be accessed from web
# browser via http://ui_ip:ui_port/

# UI_IP
# Define an ip address segget will use to provide access for tuiclients.
# The parameter should be a string holding your host dotted IP address.
# Default:
# ui_ip=127.0.0.1
ui_ip=127.0.0.1

# UI_PORT
# Define a port segget will use to provide access for tuiclients.
# The parameter should be an integer.
# Minimum value: 1
# Maximum value: 65535
# Default:
# ui_port=9999
ui_port=9999

[rss]
# RSS feed provides information on the files added (symlinked)
# to PROVIDE_MIRROR_DIR and can be accessed from feedreader
# via http://ui_ip:ui_port/rss.xml

# RSS_TITLE
# Specify a title for the RSS feed
# Default:
# rss_title=Seggetd feed
rss_title=Seggetd feed

# RSS_DESCRIPTION
# Specify description for the RSS feed
# Default:
# rss_description=Files downloaded by seggetd and provided in the local mirror
rss_description=Files downloaded by seggetd and provided in the local mirror

[request_server]
# request application adds distfiles to segget daemon queue by establishing tcp connection
# with segget daemon (request_server part of it).

# REQUEST_IP
# Define an ip address segget will use to provide access for tuiclients.
# The parameter should be a string holding your host dotted IP address.
# Default:
# request_ip=127.0.0.1
request_ip=127.0.0.1

# REQUEST_PORT
# Define a port segget will use to provide access for tuiclients.
# The parameter should be an integer.
# Minimum value: 1
# Maximum value: 65535
# Default:
# request_port=10000
request_port=10000

[scripting_and_scheduling]
# Segget provides Python scripting functionalyty to support scheduling.
# Each time segget tries to start a new connection certain network it calls
# a python script (client.py) to accept or reject this connection and
# if necessary adjusts its settings.

# PYTHON_PATH
# Define path to python
# Default:
# python_path=/usr/bin/python
python_path=/usr/bin/python

# SCRIPTS_DIR
# Define a path to the dir with python scripts. Before establishing connection for
# a particular segment via network# segget checks SCRIPTS_DIR.
# If SCRIPTS_DIR contains net#.py file, segget will launch schedule() function
# from this file to apply settings for connetion and accept or reject this
# segment for the moment. net#.py file is a python script file
# with a user-writen schedule() function.
# It's necessary to import functions before using get("variable"),
# set("variable",value), accept_segment() and reject_segment() in schedule().
# get() function can obtain values for the following variables:
# connection.num, connection.url, connection.max_speed_limit,
# network.num, network.mode, network.active_connections_count,
# distfile.name, distfile.size, distfile.dld_segments_count,
# distfile.segments_count, distfile.active_connections_count,
# segment.num, segment.try_num, segment.size, segment.range
# set() function can change connection.max_speed_limit, see example:
# -----------------EXAMPLE STARTS-----------------
# from functions import *
# import time;
# def schedule():
#     localtime = time.localtime(time.time());
#     hour=localtime[3];
#     # disable downloading distfiles that have size more than 5 000 000 bytes
#     # from 8-00 to 22-00.
#     if hour>8 and hour<22 and (get("distfile.size"))>5000000:
#         print "reject because distfile is too big"
#         reject_segment()
#     # set speed limit 50 000 cps for distfiles larger than 1 000 000 bytes
#     if get("distfile.size")>1000000:
#         print "limit connection speed"
#         set(connection.max_speed_limit, 50000)
#         accept_segment()
# -----------------EXAMPLE ENDS-----------------
# From example above localtime returns following tuple:
# Index  Attributes       Values
#   0     tm_year   e.i.: 2008
#   1     tm_mon          1 to 12
#   2     tm_mday         1 to 31
#   3     tm_hour         0 to 23
#   4     tm_min          0 to 59
#   5     tm_sec          0 to 61 (60 or 61 are leap-seconds)
#   6     tm_wday         0 to 6 (0 is Monday)
#   7     tm_yday         1 to 366 (Julian day)
#   8     tm_isdst        -1, 0, 1, -1 means library determines DST
# Therefore localtime[3] provides hours.
# Segment will be accecpted by default if it was neither accepted nor rejected
# during the schedule() function.
# sagget saves logs of resulting stdout and stderr in the log folder
# separatly for each network. Hence, if there's an error in net3.py file python
# error message would be saved to net3_script_stderr.log. Results of print would
# be saved in net3_script_stdout.log.
# Default:
# scripts_dir=/usr/share/seggetd/scripts
scripts_dir=./scripts

# SCRIPT_SOCKET_PATH
# Segget uses AF_UNIX domain sockets for communication with python.
# Specify path for the socket on your filesystem.
# NOTE !: Default value can NOT be changed yet (option under development).
# Default:
# script_socket_path=/tmp/segget_script_socket
script_socket_path=/tmp/segget_script_socket

[logs]
# LOGS_DIR
# Define a dir to store log files.
# Default:
# logs_dir=/var/log/seggetd
logs_dir=/home/mona/idfetcha/logs

# GENERAL_LOG_FILE
# Define a file name to store general log.
# Set to none to disable loggin.
# Default:
# general_log_file=segget.log
general_log_file=segget.log

# GENERAL_LOG_TIME_FORMAT
# Set time format for general log as a string containing any combination of
# regular characters and special format specifiers. These format specifiers are
# replaced by the function to the corresponding values to represent the time
# specified in timeptr. They all begin with a percentage (%) sign, and are:
# %a Abbreviated weekday name             [For example: Thu]
# %A Full weekday name                    [For example: Thursday]
# %b Abbreviated month name               [For example: Aug]
# %B Full month name                      [For example: August]
# %c Date and time representation         [For example: Thu Aug 23 14:55:02 2001]
# %d Day of the month (01-31)             [For example: 23]
# %H Hour in 24h format (00-23)           [For example: 14]
# %I Hour in 12h format (01-12)           [For example: 02]
# %j Day of the year (001-366)            [For example: 235]
# %m Month as a decimal number (01-12)    [For example: 08]
# %M Minute (00-59)                       [For example: 55]
# %p AM or PM designation                 [For example: PM]
# %S Second (00-61)                       [For example: 02]
# %U Week number with the first Sunday 
#    as the first day of week one (00-53) [For example: 33]
# %w Weekday as a decimal number with 
#    Sunday as 0 (0-6)                    [For example: 4]
# %W Week number with the first Monday as
#    the first day of week one (00-53)    [For example: 34]
# %x Date representation                  [For example: 08/23/01]
# %X Time representation                  [For example: 14:55:02]
# %y Year, last two digits (00-99)        [For example: 01]
# %Y Year                                 [For example: 2001]
# %Z Timezone name or abbreviation        [For example: CDT]
# %% A % sign                             [For example: %]
#
# For instace general_log_time_format=Time: %m/%d %X
#
# Default:
# general_log_time_format=%m/%d %X
general_log_time_format=%m/%d %X

# ERROR_LOG_FILE
# Define a file name to store error log.
# Set to none to disable loggin.
# Default:
# error_log_file=segget.log
error_log_file=error.log

# ERROR_LOG_TIME_FORMAT
# Set time format for error log as a string containing any combination of
# regular characters and special format specifiers. See GENERAL_LOG_TIME_FORMAT
# for details on format specifiers.
# Default:
# error_log_time_format=%m/%d %X
error_log_time_format=%m/%d %X

# DEBUG_LOG_FILE
# Define a file name to store debug log.
# Set to none to disable loggin.
# Default:
# debug_log_file=segget.log
debug_log_file=debug.log

# DEBUG_LOG_TIME_FORMAT
# Set time format for debug log as a string containing any combination of
# regular characters and special format specifiers. See GENERAL_LOG_TIME_FORMAT
# for details on format specifiers.
# Default:
# debug_log_time_format=%m/%d %X
debug_log_time_format=%m/%d %X