# Copyright 1999-2002 Gentoo Technologies, Inc.
# Distributed under the terms of the GNU General Public License v2
# $Header: /var/cvsroot/gentoo-x86/sys-devel/perl/perl-5.6.1-r7.ebuild,v 1.10 2002/12/28 02:13:29 mcummings Exp $

IUSE="berkdb gdbm"

S=${WORKDIR}/${P}
DESCRIPTION="Larry Wall's Practical Extraction and Reporting Language"
SRC_URI="ftp://ftp.perl.org/pub/CPAN/src/${P}.tar.gz"
HOMEPAGE="http://www.perl.org"
LICENSE="Artistic GPL-2"
SLOT="0"
KEYWORDS="x86 ppc sparc alpha"

RDEPEND="gdbm? ( >=sys-libs/gdbm-1.8.0 )
	berkdb? ( >=sys-libs/db-3.2.3h-r3
		=sys-libs/db-1.85-r1 )"

DEPEND="sys-apps/groff
	${RDEPEND}"

src_compile() {

    #The following is to handle international users. Perl does nls post-install
    export LC_ALL=C

    if [ "${ARCH}" = "alpha" ]; then
        CFLAGS="${CFLAGS} -fPIC"
        CXXFLAGS="${CXXFLAGS} -fPIC"
    fi  

    local myconf
    if [ "`use gdbm`" ]
    then
		myconf="-Di_gdbm"
    fi
    if [ "`use berkdb`" ]
    then
		myconf="${myconf} -Di_db -Di_ndbm"
    else
		myconf="${myconf} -Ui_db -Ui_ndbm"
    fi

	# configure for libperl.so
    sh Configure -des \
		-Darchname=${CHOST%%-*}-linux \
		-Dcccdlflags='-fPIC' \
		-Dccdlflags='-rdynamic' \
		-Dprefix=/usr \
		-Dlocincpth=' ' \
		-Doptimize="${CFLAGS}" \
		-Duselargefiles \
		-Duseshrplib \
		-Dlibperl=libperl.so \
		-Dd_dosuid \
		-Dd_semctl_semun \
		${myconf} || die
	# add optimization flags
    cp config.sh config.sh.orig
    sed -e "s/optimize='-O2'/optimize=\'${CFLAGS}\'/" config.sh.orig > config.sh
	# create libperl.so and move it out of the way
	mv -f Makefile Makefile_orig
	sed -e 's#^CCDLFLAGS = -rdynamic -Wl,-rpath,/usr/lib/perl5/.*#CCDLFLAGS = -rdynamic#' \
	    -e 's#^all: $(FIRSTMAKEFILE) #all: README #' \
		Makefile_orig > Makefile
    export PARCH=`grep myarchname config.sh | cut -f2 -d"'"`
	# fixes a bug in the make/testing on new systems
	make -f Makefile depend || die
	mv makefile makefile_orig
	mv x2p/makefile x2p/makefile_orig
		  egrep -v "(<built-in>|<command line>)" makefile_orig >makefile
		  egrep -v "(<built-in>|<command line>)" x2p/makefile_orig >x2p/makefile
	make -f Makefile libperl.so || die
	mv libperl.so ${WORKDIR}

	# starting from scratch again
	cd ${WORKDIR}
	rm -rf ${S}
	unpack ${A}
	cd ${S}
	
	# configure for libperl.a
# this is gross -- from Christian Gafton, Red Hat
	cat > config.over <<EOF
installprefix=${D}/usr
#test -d \$installprefix || mkdir \$installprefix
#test -d \$installprefix/bin || mkdir \$installprefix/bin
installarchlib=\`echo \$installarchlib | sed "s!\$prefix!\$installprefix!"\`
installbin=\`echo \$installbin | sed "s!\$prefix!\$installprefix!"\`
#installman1dir=\$installprefix/share/man/man1
#installman3dir=\$installprefix/share/man/man3
installman1dir=\`echo \$installman1dir | sed "s!\$prefix!\$installprefix!"\`
installman3dir=\`echo \$installman3dir | sed "s!\$prefix!\$installprefix!"\`
installman1dir=\`echo \$installman1dir | sed "s!/man/!/share/man/!"\`
installman3dir=\`echo \$installman3dir | sed "s!/man/!/share/man/!"\`
man1ext=1
man3ext=3pm
installprivlib=\`echo \$installprivlib | sed "s!\$prefix!\$installprefix!"\`
installscript=\`echo \$installscript | sed "s!\$prefix!\$installprefix!"\`
installsitelib=\`echo \$installsitelib | sed "s!\$prefix!\$installprefix!"\`
installsitearch=\`echo \$installsitearch | sed "s!\$prefix!\$installprefix!"\`
EOF

    sh Configure -des \
		-Dprefix=/usr \
		-Darchname=${CHOST%%-*}-linux \
		-Duselargefiles \
		-Dd_dosuid \
		-Dlocincpth=' ' \
		-Dd_semctl_semun \
		${myconf} || die

    #Optimize ;)
    cp config.sh config.sh.orig
    sed -e "s/optimize='-O2'/optimize=\'${CFLAGS}\'/" config.sh.orig > config.sh
    #THIS IS USED LATER:
    export PARCH=`grep myarchname config.sh | cut -f2 -d"'"`

# Umm, for some reason this doesn't want to work, so we'll just remove
#  the makefiles and let make rebuild them itself. (It seems to do it
#  right the second time... -- pete
#    cp makefile makefile.orig
#    sed -e "s:^0::" makefile.orig > makefile

	mv Makefile Makefile_orig
	sed -e 's#^all: $(FIRSTMAKEFILE) #all: README #' \
		Makefile_orig > Makefile
    
    #for some reason, this rm -f doesn't seem to actually do anything. So we explicitly use "Makefile"
    #(rather than the default "makefile") in all make commands below.
    rm -f makefile x2p/makefile
    make -f Makefile depend || die
    mv makefile makefile_orig
    mv x2p/makefile x2p/makefile_orig
    egrep -v "(<built-in>|<command line>)" makefile_orig >makefile
    egrep -v "(<built-in>|<command line>)" x2p/makefile_orig >x2p/makefile
    make -f Makefile || die
	cp ${O}/files/stat.t ./t/op/
    # Parallel make fails
	# dont use the || die since some tests fail on bootstrap
	if [ `expr "$PARCH" ":" "sparc"` -gt 4 ]; then
		echo "Skipping tests on this platform"
	else
    	make -f Makefile test 
	fi
}

src_install() {
#The following is to handle international users. Perl does nls post-install 
    export LC_ALL=C 

    export PARCH=`grep myarchname config.sh | cut -f2 -d"'"`

	insinto /usr/lib/perl5/${PV}/${PARCH}/CORE/
	doins ${WORKDIR}/libperl.so
	dosym /usr/lib/perl5/${PV}/${PARCH}/CORE/libperl.so /usr/lib/libperl.so
	

#    make -f Makefile \
#		INSTALLMAN1DIR=${D}/usr/share/man/man1 \
#		INSTALLMAN3DIR=${D}/usr/share/man/man3 \
#		install || die

	make \
		DESTDIR=${D} \
		INSTALLMAN1DIR=${D}/usr/share/man/man1 \
		INSTALLMAN3DIR=${D}/usr/share/man/man3 \
		install || die "Unable to make install"
    install -m 755 utils/pl2pm ${D}/usr/bin/pl2pm


	#man pages

#	./perl installman \
#		--man1dir=${D}/usr/share/man/man1 \
#		--man1ext=1 \
#		--man3dir=${D}/usr/share/man/man3 \
#		--man3ext=3


	# This removes ${D} from Config.pm

	dosed /usr/lib/perl5/${PV}/${CHOST%%-*}-linux/Config.pm
	dosed /usr/lib/perl5/${PV}/${CHOST%%-*}-linux/.packlist

	# DOCUMENTATION

    dodoc Changes* Artistic Copying README Todo* AUTHORS
    prepalldocs

	# HTML Documentation
    
	dodir /usr/share/doc/${PF}/html
    ./perl installhtml --recurse --htmldir=${D}/usr/share/doc/${PF}/html

}