# Copyright 1999-2012 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
# $Header: /var/cvsroot/gentoo-x86/sys-cluster/torque/torque-3.0.5.ebuild,v 1.1 2012/06/22 21:58:33 jsbronder Exp $

EAPI=2
inherit flag-o-matic eutils linux-info autotools

DESCRIPTION="Resource manager and queuing system based on OpenPBS"
HOMEPAGE="http://www.adaptivecomputing.com/products/torque.php"
SRC_URI="http://www.adaptivecomputing.com/resources/downloads/${PN}/${P}.tar.gz"

LICENSE="torque-2.5"

SLOT="0"
KEYWORDS="~alpha ~amd64 ~hppa ~ia64 ~mips ~ppc ~ppc64 ~sparc ~x86"
IUSE="cpusets +crypt doc drmaa kernel_linux munge nvidia server +syslog threads tk"

# ed is used by makedepend-sh
DEPEND_COMMON="sys-libs/ncurses
	sys-libs/readline
	munge? ( sys-auth/munge )
	nvidia? ( >=x11-drivers/nvidia-drivers-275 )
	tk? ( dev-lang/tk )
	syslog? ( virtual/logger )
	!games-util/qstat"

DEPEND="${DEPEND_COMMON}
	sys-apps/ed
	!sys-cluster/slurm"

RDEPEND="${DEPEND_COMMON}
	crypt? ( net-misc/openssh )
	!crypt? ( net-misc/netkit-rsh )"

pkg_setup() {
	PBS_SERVER_HOME="${PBS_SERVER_HOME:-/var/spool/torque}"

	# Find a Torque server to use.  Check environment, then
	# current setup (if any), and fall back on current hostname.
	if [ -z "${PBS_SERVER_NAME}" ]; then
		if [ -f "${ROOT}${PBS_SERVER_HOME}/server_name" ]; then
			PBS_SERVER_NAME="$(<${ROOT}${PBS_SERVER_HOME}/server_name)"
		else
			PBS_SERVER_NAME=$(hostname -f)
		fi
	fi

	USE_CPUSETS="--disable-cpuset"
	if use cpusets; then
		if ! use kernel_linux; then
			einfo
			elog "    Torque currently only has support for cpusets in linux."
			elog "Assuming you didn't really want this USE flag."
			einfo
		else
			linux-info_pkg_setup
			einfo
			elog "    Torque support for cpusets is still in development, you may"
			elog "wish to disable it for production use."
			einfo
			if ! linux_config_exists || ! linux_chkconfig_present CPUSETS; then
				einfo
				elog "    Torque support for cpusets will require that you recompile"
				elog "your kernel with CONFIG_CPUSETS enabled."
				einfo
			fi
			USE_CPUSETS="--enable-cpuset"
		fi
	fi
}

src_prepare() {
	# as-needed fix, libutils.a needs librt.
	sed -i 's,^\(LDADD = .*\)$(MOMLIBS) $(PBS_LIBS),\1$(PBS_LIBS) $(MOMLIBS),' \
		src/resmom/Makefile.am || die
	eautoreconf
}

src_configure() {
	local myconf="--with-rcp=mom_rcp"

	use crypt && myconf="--with-rcp=scp"

	econf \
		$(use_enable tk gui) \
		$(use_enable syslog) \
		$(use_enable server) \
		$(use_enable drmaa) \
		$(use_enable threads high-availability) \
		$(use_enable munge munge-auth) \
		$(use_enable nvidia nvidia-gpus) \
		--with-server-home=${PBS_SERVER_HOME} \
		--with-environ=/etc/pbs_environment \
		--with-default-server=${PBS_SERVER_NAME} \
		--disable-gcc-warnings \
		--with-tcp-retry-limit=2 \
		${USE_CPUSETS} \
		${myconf}
}

# WARNING
# OpenPBS is extremely stubborn about directory permissions. Sometimes it will
# just fall over with the error message, but in some spots it will just ignore
# you and fail strangely. Likewise it also barfs on our .keep files!
pbs_createspool() {
	local root="$1"
	local s="$(dirname "${PBS_SERVER_HOME}")"
	local h="${PBS_SERVER_HOME}"
	local sp="${h}/server_priv"
	einfo "Building spool directory under ${D}${h}"
	local a d m
	local dir_spec="
			0755:${h}/aux 0700:${h}/checkpoint
			0755:${h}/mom_logs 0751:${h}/mom_priv 0751:${h}/mom_priv/jobs
			1777:${h}/spool 1777:${h}/undelivered"

	if use server; then
		dir_spec="${dir_spec} 0755:${h}/sched_logs
			0755:${h}/sched_priv/accounting 0755:${h}/server_logs
			0750:${h}/server_priv 0755:${h}/server_priv/accounting
			0750:${h}/server_priv/acl_groups 0750:${h}/server_priv/acl_hosts
			0750:${h}/server_priv/acl_svr 0750:${h}/server_priv/acl_users
			0750:${h}/server_priv/jobs 0750:${h}/server_priv/queues"
	fi

	for a in ${dir_spec}; do
		d="${a/*:}"
		m="${a/:*}"
		if [[ ! -d "${root}${d}" ]]; then
			install -d -m${m} "${root}${d}" || die
		else
			chmod ${m} "${root}${d}" || die
		fi
		# (#149226) If we're running in src_*, then keepdir
		if [[ "${root}" = "${D}" ]]; then
			keepdir ${d} || die
		fi
	done
}

src_install() {
	# Make directories first
	pbs_createspool "${D}"

	emake DESTDIR="${D}" install || die "make install failed"

	dodoc CHANGELOG README.* Release_Notes || die "dodoc failed"
	if use doc; then
		dodoc doc/admin_guide.ps doc/*.pdf || die "dodoc failed"
	fi

	# The build script isn't alternative install location friendly,
	# So we have to fix some hard-coded paths in tclIndex for xpbs* to work
	for file in `find "${D}" -iname tclIndex`; do
		sed -e "s/${D//\// }/ /" "${file}" > "${file}.new"
		mv "${file}.new" "${file}" || die
	done

	if use server; then
		newinitd "${FILESDIR}"/pbs_server-init.d-munge pbs_server || die
		newinitd "${FILESDIR}"/pbs_sched-init.d pbs_sched || die
	fi
	newinitd "${FILESDIR}"/pbs_mom-init.d-munge pbs_mom || die
	newconfd "${FILESDIR}"/torque-conf.d-munge torque || die
	newenvd "${FILESDIR}"/torque-env.d 25torque || die
}

pkg_preinst() {
	if [[ -f "${ROOT}etc/pbs_environment" ]]; then
		cp "${ROOT}etc/pbs_environment" "${D}"/etc/pbs_environment || die
	fi

	echo "${PBS_SERVER_NAME}" > "${D}${PBS_SERVER_HOME}/server_name" || die

	# Fix up the env.d file to use our set server home.
	sed -i \
		"s:/var/spool/torque:${PBS_SERVER_HOME}:g" "${D}"/etc/env.d/25torque \
		|| die

	if use munge; then
		sed -i 's,\(PBS_USE_MUNGE=\).*,\11,' "${D}"etc/conf.d/torque || die
	fi
}

pkg_postinst() {
	pbs_createspool "${ROOT}"
	elog "    If this is the first time torque has been installed, then you are not"
	elog "ready to start the server.  Please refer to the documentation located at:"
	elog "http://www.clusterresources.com/wiki/doku.php?id=torque:torque_wiki"

	elog "    For a basic setup, you may use emerge --config ${PN}"
	if use server; then
		elog "    The format for the serverdb is now xml only.  If you do not want"
		elog "this, reverting to 2.4.x is your only option.  The upgrade will"
		elog "happen automatically when pbs_server is restarted"
	fi
	elog "    The on-wire protocol version has been bumped from 1 to 2."
	elog "Versions of Torque before 3.0.0 are no longer able to communicate."
}

# root will be setup as the primary operator/manager, the local machine
# will be added as a node and we'll create a simple queue, batch.
pkg_config() {
	local h="$(echo "${ROOT}/${PBS_SERVER_HOME}" | sed 's:///*:/:g')"
	local rc=0

	ebegin "Configuring Torque"
	einfo "Using ${h} as the pbs homedir"
	einfo "Using ${PBS_SERVER_NAME} as the pbs_server"

	# Check for previous configuration and bail if found.
	if [ -e "${h}/server_priv/acl_svr/operators" ] \
		|| [ -e "${h}/server_priv/nodes" ] \
		|| [ -e "${h}/mom_priv/config" ]; then
		ewarn "Previous Torque configuration detected.  Press Enter to"
		ewarn "continue or Control-C to abort now"
		read
	fi

	# pbs_mom configuration.
	echo "\$pbsserver ${PBS_SERVER_NAME}" > "${h}/mom_priv/config" || die
	echo "\$logevent 255" >> "${h}/mom_priv/config" || die

	if use server; then
		local qmgr="${ROOT}/usr/bin/qmgr -c"
		# pbs_server bails on repeated backslashes.
		if ! "${ROOT}"/usr/sbin/pbs_server -f -d "${h}" -t create; then
			eerror "Failed to start pbs_server"
			rc=1
		else
			${qmgr} "set server operators = root@$(hostname -f)" ${PBS_SERVER_NAME} \
				&& ${qmgr} "create queue batch" ${PBS_SERVER_NAME} \
				&& ${qmgr} "set queue batch queue_type = Execution" ${PBS_SERVER_NAME} \
				&& ${qmgr} "set queue batch started = True" ${PBS_SERVER_NAME} \
				&& ${qmgr} "set queue batch enabled = True" ${PBS_SERVER_NAME} \
				&& ${qmgr} "set server default_queue = batch" ${PBS_SERVER_NAME} \
				&& ${qmgr} "set server resources_default.nodes = 1" ${PBS_SERVER_NAME} \
				&& ${qmgr} "set server scheduling = True" ${PBS_SERVER_NAME} \
				|| die

			"${ROOT}"/usr/bin/qterm -t quick ${PBS_SERVER_NAME} || rc=1

			# Add the local machine as a node.
			echo "$(hostname -f) np=1" > "${h}/server_priv/nodes" || die
		fi
	fi
	eend ${rc}
}