# Copyright 1999-2006 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
# $Header: /var/cvsroot/gentoo-x86/eclass/toolchain.eclass,v 1.254 2006/03/24 04:03:54 vapier Exp $

HOMEPAGE="http://www.gnu.org/software/gcc/gcc.html"
LICENSE="GPL-2 LGPL-2.1"
RESTRICT="nostrip" # cross-compilers need controlled stripping

#---->> eclass stuff <<----
inherit eutils versionator libtool toolchain-funcs flag-o-matic gnuconfig multilib fixheadtails

EXPORT_FUNCTIONS pkg_setup src_unpack src_compile src_test pkg_preinst src_install pkg_postinst pkg_prerm pkg_postrm
DESCRIPTION="Based on the ${ECLASS} eclass"

FEATURES=${FEATURES/multilib-strict/}

toolchain_pkg_setup() {
	gcc_pkg_setup
}
toolchain_src_unpack() {
	gcc_src_unpack
}
toolchain_src_compile() {
	gcc_src_compile
}
toolchain_src_test() {
	gcc_src_test
}
toolchain_pkg_preinst() {
	${ETYPE}_pkg_preinst
}
toolchain_src_install() {
	${ETYPE}_src_install
}
toolchain_pkg_postinst() {
	${ETYPE}_pkg_postinst
}
toolchain_pkg_prerm() {
	${ETYPE}_pkg_prerm
}
toolchain_pkg_postrm() {
	${ETYPE}_pkg_postrm
}
#----<< eclass stuff >>----


#---->> globals <<----
export CTARGET=${CTARGET:-${CHOST}}
if [[ ${CTARGET} = ${CHOST} ]] ; then
	if [[ ${CATEGORY/cross-} != ${CATEGORY} ]] ; then
		export CTARGET=${CATEGORY/cross-}
	fi
fi
is_crosscompile() {
	[[ ${CHOST} != ${CTARGET} ]]
}

tc_version_is_at_least() { version_is_at_least "$1" "${2:-${GCC_PV}}" ; }


GCC_PV=${TOOLCHAIN_GCC_PV:-${PV}}
GCC_PVR=${GCC_PV}
[[ ${PR} != "r0" ]] && GCC_PVR=${GCC_PVR}-${PR}
GCC_RELEASE_VER=$(get_version_component_range 1-3 ${GCC_PV})
GCC_BRANCH_VER=$(get_version_component_range 1-2 ${GCC_PV})
GCCMAJOR=$(get_version_component_range 1 ${GCC_PV})
GCCMINOR=$(get_version_component_range 2 ${GCC_PV})
GCCMICRO=$(get_version_component_range 3 ${GCC_PV})
[[ ${BRANCH_UPDATE-notset} == "notset" ]] && BRANCH_UPDATE=$(get_version_component_range 4 ${GCC_PV})

# According to gcc/c-cppbuiltin.c, GCC_CONFIG_VER MUST match this regex.
# ([^0-9]*-)?[0-9]+[.][0-9]+([.][0-9]+)?([- ].*)?
GCC_CONFIG_VER=${GCC_CONFIG_VER:-$(replace_version_separator 3 '-' ${GCC_PV})}

# Pre-release support
if [[ ${GCC_PV} != ${GCC_PV/_pre/-} ]] ; then
	PRERELEASE=${GCC_PV/_pre/-}
fi
# make _alpha and _beta ebuilds automatically use a snapshot
if [[ ${GCC_PV} != ${GCC_PV/_alpha/} ]] ; then
	SNAPSHOT=${GCC_BRANCH_VER}-${GCC_PV##*_alpha}
elif [[ ${GCC_PV} != ${GCC_PV/_beta/} ]] ; then
	SNAPSHOT=${GCC_BRANCH_VER}-${GCC_PV##*_beta}
fi
export GCC_FILESDIR=${GCC_FILESDIR:-${FILESDIR}}

if [[ ${ETYPE} == "gcc-library" ]] ; then
	GCC_VAR_TYPE=${GCC_VAR_TYPE:-non-versioned}
	GCC_LIB_COMPAT_ONLY=${GCC_LIB_COMPAT_ONLY:-true}
	GCC_TARGET_NO_MULTILIB=${GCC_TARGET_NO_MULTILIB:-true}
else
	GCC_VAR_TYPE=${GCC_VAR_TYPE:-versioned}
	GCC_LIB_COMPAT_ONLY="false"
	GCC_TARGET_NO_MULTILIB=${GCC_TARGET_NO_MULTILIB:-false}
fi

PREFIX=${TOOLCHAIN_PREFIX:-/usr}

if [[ ${GCC_VAR_TYPE} == "versioned" ]] ; then
	if tc_version_is_at_least 3.4.0 ; then
		LIBPATH=${TOOLCHAIN_LIBPATH:-${PREFIX}/lib/gcc/${CTARGET}/${GCC_CONFIG_VER}}
	else
		LIBPATH=${TOOLCHAIN_LIBPATH:-${PREFIX}/lib/gcc-lib/${CTARGET}/${GCC_CONFIG_VER}}
	fi
	LIBEXECPATH=${TOOLCHAIN_LIBEXE:-${PREFIX}/libexec/gcc/${CTARGET}/${GCC_CONFIG_VER}}
	INCLUDEPATH=${TOOLCHAIN_INCLUDEPATH:-${LIBPATH}/include}
	BINPATH=${TOOLCHAIN_BINPATH:-${PREFIX}/${CTARGET}/gcc-bin/${GCC_CONFIG_VER}}
	DATAPATH=${TOOLCHAIN_DATAPATH:-${PREFIX}/share/gcc-data/${CTARGET}/${GCC_CONFIG_VER}}
	# Dont install in /usr/include/g++-v3/, but in gcc internal directory.
	# We will handle /usr/include/g++-v3/ with gcc-config ...
	STDCXX_INCDIR=${TOOLCHAIN_STDCXX_INCDIR:-${LIBPATH}/include/g++-v${GCC_BRANCH_VER/\.*/}}
elif [[ ${GCC_VAR_TYPE} == "non-versioned" ]] ; then
	# using non-versioned directories to install gcc, like what is currently
	# done for ppc64 and 3.3.3_pre, is a BAD IDEA. DO NOT do it!! However...
	# setting up variables for non-versioned directories might be useful for
	# specific gcc targets, like libffi. Note that we dont override the value
	# returned by get_libdir here.
	LIBPATH=${TOOLCHAIN_LIBPATH:-${PREFIX}/$(get_libdir)}
	LIBEXECPATH=${TOOLCHAIN_LIBEXE:-${PREFIX}/libexec/gcc}
	INCLUDEPATH=${TOOLCHAIN_INCLUDEPATH:-${PREFIX}/include}
	BINPATH=${TOOLCHAIN_BINPATH:-${PREFIX}/bin}
	DATAPATH=${TOOLCHAIN_DATAPATH:-${PREFIX}/share}
	STDCXX_INCDIR=${TOOLCHAIN_STDCXX_INCDIR:-${PREFIX}/include/g++-v3}
fi

XGCC="${WORKDIR}/build/gcc/xgcc -B${WORKDIR}/build/gcc"
#----<< globals >>----


#---->> SLOT+IUSE logic <<----
if [[ ${ETYPE} == "gcc-library" ]] ; then
	IUSE="nls build"
	SLOT="${CTARGET}-${SO_VERSION_SLOT:-5}"
else
	IUSE="multislot"

	if [[ ${PN} != "kgcc64" ]] ; then
		IUSE="${IUSE} altivec bootstrap build doc fortran gcj gtk hardened multilib nls nocxx objc vanilla"
		[[ -n ${PIE_VER}    ]] && IUSE="${IUSE} nopie"
		[[ -n ${PP_VER}     ]] && IUSE="${IUSE} nossp"
		[[ -n ${HTB_VER}    ]] && IUSE="${IUSE} boundschecking"
	fi

	# gcc-{nios2,bfin} don't accept these
	if [[ ${PN} == "gcc" ]] ; then
		IUSE="${IUSE} ip28 n32 n64"
	fi

	# these are features introduced in 4.0
	if tc_version_is_at_least "4.0" ; then
		IUSE="${IUSE} objc-gc mudflap"

		if tc_version_is_at_least "4.1" ; then
			IUSE="${IUSE} objc++"
		fi
	fi

	# Support upgrade paths here or people get pissed
	if use multislot ; then
		SLOT="${CTARGET}-${GCC_CONFIG_VER}"
	elif is_crosscompile; then
		SLOT="${CTARGET}-${GCC_BRANCH_VER}"
	else
		SLOT="${GCC_BRANCH_VER}"
	fi
fi
#----<< SLOT+IUSE logic >>----


#---->> S + SRC_URI essentials <<----

# This function sets the source directory depending on whether we're using
# a prerelease, snapshot, or release tarball. To use it, just set S with:
#
#	S="$(gcc_get_s_dir)"
#
# Travis Tilley <lv@gentoo.org> (03 Sep 2004)
#
gcc_get_s_dir() {
	if [[ -n ${PRERELEASE} ]] ; then
		GCC_S=${WORKDIR}/gcc-${PRERELEASE}
	elif [[ -n ${SNAPSHOT} ]] ; then
		GCC_S=${WORKDIR}/gcc-${SNAPSHOT}
	else
		GCC_S=${WORKDIR}/gcc-${GCC_RELEASE_VER}
	fi

	echo "${GCC_S}"
}

# This function handles the basics of setting the SRC_URI for a gcc ebuild.
# To use, set SRC_URI with:
#
#	SRC_URI="$(get_gcc_src_uri)"
#
# Other than the variables normally set by portage, this function's behavior
# can be altered by setting the following:
#
#	SNAPSHOT
#			If set, this variable signals that we should be using a snapshot
#			of gcc from ftp://sources.redhat.com/pub/gcc/snapshots/. It is
#			expected to be in the format "YYYY-MM-DD". Note that if the ebuild
#			has a _pre suffix, this variable is ignored and the prerelease
#			tarball is used instead.
#
#	BRANCH_UPDATE
#			If set, this variable signals that we should be using the main
#			release tarball (determined by ebuild version) and applying a
#			CVS branch update patch against it. The location of this branch
#			update patch is assumed to be in ${GENTOO_TOOLCHAIN_BASE_URI}.
#			Just like with SNAPSHOT, this variable is ignored if the ebuild
#			has a _pre suffix.
#
#	PATCH_VER
#	PATCH_GCC_VER
#			This should be set to the version of the gentoo patch tarball.
#			The resulting filename of this tarball will be:
#			gcc-${PATCH_GCC_VER:-${GCC_RELEASE_VER}}-patches-${PATCH_VER}.tar.bz2
#
#	PIE_VER
#	PIE_GCC_VER
#	obsoleted: PIE_CORE
#			These variables control patching in various updates for the logic
#			controlling Position Independant Executables. PIE_VER is expected
#			to be the version of this patch, PIE_GCC_VER the gcc version of
#			the patch, and PIE_CORE (obsoleted) the actual filename of the patch.
#			An example:
#					PIE_VER="8.7.6.5"
#					PIE_GCC_VER="3.4.0"
#			The resulting filename of this tarball will be:
#			gcc-${PIE_GCC_VER:-${GCC_RELEASE_VER}}-piepatches-v${PIE_VER}.tar.bz2
#				old syntax (do not define PIE_CORE anymore):
#					PIE_CORE="gcc-3.4.0-piepatches-v${PIE_VER}.tar.bz2"
#
#	PP_VER
#	PP_GCC_VER
#	obsoleted: PP_FVER
#			These variables control patching in stack smashing protection
#			support. They both control the version of ProPolice to download.
#
#		PP_VER / PP_GCC_VER
#			Used to roll our own custom tarballs of ssp.
#		PP_FVER / PP_VER
#			Used for mirroring ssp straight from IBM.
#			PP_VER sets the version of the directory in which to find the
#			patch, and PP_FVER sets the version of the patch itself. For
#			example:
#					PP_VER="3_4"
#					PP_FVER="${PP_VER//_/.}-2"
#			would download gcc3_4/protector-3.4-2.tar.gz
#
#	HTB_VER
#	HTB_GCC_VER
#			These variables control whether or not an ebuild supports Herman
#			ten Brugge's bounds-checking patches. If you want to use a patch
#			for an older gcc version with a new gcc, make sure you set
#			HTB_GCC_VER to that version of gcc.
#
#	MAN_VER
#			The version of gcc for which we will download manpages. This will
#			default to ${GCC_RELEASE_VER}, but we may not want to pre-generate man pages
#			for prerelease test ebuilds for example. This allows you to
#			continue using pre-generated manpages from the last stable release.
#			If set to "none", this will prevent the downloading of manpages,
#			which is useful for individual library targets.
#
gentoo_urls() {
	local devspace="HTTP~lv/GCC/URI HTTP~eradicator/gcc/URI HTTP~vapier/dist/URI
	HTTP~halcy0n/patches/URI"
	devspace=${devspace//HTTP/http:\/\/dev.gentoo.org\/}
	echo mirror://gentoo/$1 ${devspace//URI/$1}
}
get_gcc_src_uri() {
	export PATCH_GCC_VER=${PATCH_GCC_VER:-${GCC_RELEASE_VER}}
	export UCLIBC_GCC_VER=${UCLIBC_GCC_VER:-${PATCH_GCC_VER}}
	export PIE_GCC_VER=${PIE_GCC_VER:-${GCC_RELEASE_VER}}
	export PP_GCC_VER=${PP_GCC_VER:-${GCC_RELEASE_VER}}
	export HTB_GCC_VER=${HTB_GCC_VER:-${GCC_RELEASE_VER}}

	[[ -n ${PIE_VER} ]] && \
		PIE_CORE=${PIE_CORE:-gcc-${PIE_GCC_VER}-piepatches-v${PIE_VER}.tar.bz2}

	# Set where to download gcc itself depending on whether we're using a
	# prerelease, snapshot, or release tarball.
	if [[ -n ${PRERELEASE} ]] ; then
		GCC_SRC_URI="ftp://gcc.gnu.org/pub/gcc/prerelease-${PRERELEASE}/gcc-${PRERELEASE}.tar.bz2"
	elif [[ -n ${SNAPSHOT} ]] ; then
		GCC_SRC_URI="ftp://sources.redhat.com/pub/gcc/snapshots/${SNAPSHOT}/gcc-${SNAPSHOT}.tar.bz2"
	else
		GCC_SRC_URI="mirror://gnu/gcc/gcc-${GCC_PV}/gcc-${GCC_RELEASE_VER}.tar.bz2"
		# we want all branch updates to be against the main release
		[[ -n ${BRANCH_UPDATE} ]] && \
			GCC_SRC_URI="${GCC_SRC_URI} $(gentoo_urls gcc-${GCC_RELEASE_VER}-branch-update-${BRANCH_UPDATE}.patch.bz2)"
	fi

	# propolice aka stack smashing protection
	if [[ -n ${PP_VER} ]] ; then
		if [[ -n ${PP_FVER} ]] ; then
			GCC_SRC_URI="${GCC_SRC_URI}
				!nossp? (
					http://www.research.ibm.com/trl/projects/security/ssp/gcc${PP_VER}/protector-${PP_FVER}.tar.gz
					$(gentoo_urls protector-${PP_FVER}.tar.gz)
				)"
		else
			GCC_SRC_URI="${GCC_SRC_URI} $(gentoo_urls gcc-${PP_GCC_VER}-ssp-${PP_VER}.tar.bz2)"
		fi
	fi

	# uclibc lovin
	[[ -n ${UCLIBC_VER} ]] && \
		GCC_SRC_URI="${GCC_SRC_URI} $(gentoo_urls gcc-${UCLIBC_GCC_VER}-uclibc-patches-${UCLIBC_VER}.tar.bz2)"

	# PERL cannot be present at bootstrap, and is used to build the man pages.
	# So... lets include some pre-generated ones, shall we?
	[[ -n ${MAN_VER} ]] && \
		GCC_SRC_URI="${GCC_SRC_URI} $(gentoo_urls gcc-${MAN_VER}-manpages.tar.bz2)"

	# various gentoo patches
	[[ -n ${PATCH_VER} ]] && \
		GCC_SRC_URI="${GCC_SRC_URI} $(gentoo_urls gcc-${PATCH_GCC_VER}-patches-${PATCH_VER}.tar.bz2)"

	# strawberry pie, Cappuccino and a Gauloises (it's a good thing)
	[[ -n ${PIE_VER} ]] && \
		GCC_SRC_URI="${GCC_SRC_URI} !nopie? ( $(gentoo_urls ${PIE_CORE}) )"

	# gcc bounds checking patch
	if [[ -n ${HTB_VER} ]] ; then
		local HTBFILE="bounds-checking-gcc-${HTB_GCC_VER}-${HTB_VER}.patch.bz2"
		GCC_SRC_URI="${GCC_SRC_URI}
			boundschecking? (
				mirror://sourceforge/boundschecking/${HTBFILE}
				http://web.inter.nl.net/hcc/Haj.Ten.Brugge/${HTBFILE}
				$(gentoo_urls ${HTBFILE})
			)"
	fi

	echo "${GCC_SRC_URI}"
}
S=$(gcc_get_s_dir)
SRC_URI=$(get_gcc_src_uri)
#---->> S + SRC_URI essentials >>----


#---->> support checks <<----

# The gentoo piessp patches allow for 3 configurations:
# 1) PIE+SSP by default
# 2) PIE by default
# 3) SSP by default
hardened_gcc_works() {
	if [[ $1 == "pie" ]] ; then
		want_pie || return 1
		hardened_gcc_is_stable pie && return 0
		if has ~$(tc-arch) ${ACCEPT_KEYWORDS} ; then
			hardened_gcc_check_unsupported pie && return 1
			ewarn "Allowing pie-by-default for an unstable arch ($(tc-arch))"
			return 0
		fi
		return 1
	elif [[ $1 == "ssp" ]] ; then
		[[ -z ${PP_VER} ]] && return 1
		hardened_gcc_is_stable ssp && return 0
		if has ~$(tc-arch) ${ACCEPT_KEYWORDS} ; then
			hardened_gcc_check_unsupported ssp && return 1
			ewarn "Allowing ssp-by-default for an unstable arch ($(tc-arch))"
			return 0
		fi
		return 1
	else
		# laziness ;)
		hardened_gcc_works pie || return 1
		hardened_gcc_works ssp || return 1
		return 0
	fi
}

hardened_gcc_is_stable() {
	if [[ $1 == "pie" ]] ; then
		# HARDENED_* variables are deprecated and here for compatibility
		local tocheck="${HARDENED_PIE_WORKS} ${HARDENED_GCC_WORKS}"
		if is_uclibc ; then
			tocheck="${tocheck} ${PIE_UCLIBC_STABLE}"
		else
			tocheck="${tocheck} ${PIE_GLIBC_STABLE}"
		fi
	elif [[ $1 == "ssp" ]] ; then
		# ditto
		local tocheck="${HARDENED_SSP_WORKS} ${HARDENED_GCC_WORKS}"
		if is_uclibc ; then
			tocheck="${tocheck} ${SSP_UCLIBC_STABLE}"
		else
			tocheck="${tocheck} ${SSP_STABLE}"
		fi
	else
		die "hardened_gcc_stable needs to be called with pie or ssp"
	fi

	hasq $(tc-arch) ${tocheck} && return 0
	return 1
}

hardened_gcc_check_unsupported() {
	local tocheck=""
	# if a variable is unset, we assume that all archs are unsupported. since
	# this function is never called if hardened_gcc_is_stable returns true,
	# this shouldn't cause problems... however, allowing this logic to work
	# even with the variables unset will break older ebuilds that dont use them.
	if [[ $1 == "pie" ]] ; then
		if is_uclibc ; then
			[[ -z ${PIE_UCLIBC_UNSUPPORTED} ]] && return 0
			tocheck="${tocheck} ${PIE_UCLIBC_UNSUPPORTED}"
		else
			[[ -z ${PIE_GLIBC_UNSUPPORTED} ]] && return 0
			tocheck="${tocheck} ${PIE_GLIBC_UNSUPPORTED}"
		fi
	elif [[ $1 == "ssp" ]] ; then
		if is_uclibc ; then
			[[ -z ${SSP_UCLIBC_UNSUPPORTED} ]] && return 0
			tocheck="${tocheck} ${SSP_UCLIBC_UNSUPPORTED}"
		else
			[[ -z ${SSP_UNSUPPORTED} ]] && return 0
			tocheck="${tocheck} ${SSP_UNSUPPORTED}"
		fi
	else
		die "hardened_gcc_check_unsupported needs to be called with pie or ssp"
	fi

	hasq $(tc-arch) ${tocheck} && return 0
	return 1
}

has_libssp() {
	[[ -e /$(get_libdir)/libssp.so ]] && return 0
	return 1
}

want_libssp() {
	[[ ${GCC_LIBSSP_SUPPORT} == "true" ]] || return 1
	has_libssp || return 1
	[[ -n ${PP_VER} ]] || return 1
	return 0
}

_want_stuff() {
	local var=$1 flag=$2
	[[ -z ${!var} ]] && return 1
	use ${flag} && return 0
	return 1
}
want_boundschecking() { _want_stuff HTB_VER boundschecking ; }
want_pie() { _want_stuff PIE_VER !nopie ; }
want_ssp() { _want_stuff PP_VER !nossp ; }

want_split_specs() {
	[[ ${SPLIT_SPECS} == "true" ]] && want_pie
}

# This function checks whether or not glibc has the support required to build
# Position Independant Executables with gcc.
glibc_have_pie() {
	if [[ ! -f ${ROOT}/usr/$(get_libdir)/Scrt1.o ]] ; then
		echo
		ewarn "Your glibc does not have support for pie, the file Scrt1.o is missing"
		ewarn "Please update your glibc to a proper version or disable hardened"
		echo
		return 1
	fi
}

# This function determines whether or not libc has been patched with stack
# smashing protection support.
libc_has_ssp() {
	local libc_prefix
	[[ $(tc-arch) == "ppc64" ]] && [[ -z ${ABI} ]] && libc_prefix="lib64"
	libc_prefix=${libc_prefix:-$(get_libdir)}
	libc_prefix=${libc_prefix:-lib}

	echo 'int main(){}' > "${T}"/libctest.c
	gcc "${T}"/libctest.c -lc -o libctest
	local libc_file=$(readelf -d libctest | grep 'NEEDED.*\[libc\.so[0-9\.]*\]' | awk '{print $NF}')
	libc_file=${libc_file:1:${#libc_file}-2}

	local my_libc=${ROOT}/${libc_prefix}/${libc_file}

	# Check for gcc-4.x style ssp support
	if  [[ -n $(readelf -s "${my_libc}" 2>/dev/null | \
	            grep 'FUNC.*GLOBAL.*__stack_chk_fail') ]]
	then
		return 0
	else
		# Check for gcc-3.x style ssp support
		if  [[ -n $(readelf -s "${my_libc}" 2>/dev/null | \
		            grep 'OBJECT.*GLOBAL.*__guard') ]] && \
		    [[ -n $(readelf -s "${my_libc}" 2>/dev/null | \
		            grep 'FUNC.*GLOBAL.*__stack_smash_handler') ]]
		then
			return 0
		elif is_crosscompile ; then
			die "'${my_libc}' was detected w/out ssp, that sucks (a lot)"
		else
			return 1
		fi
	fi
}

# This is to make sure we don't accidentally try to enable support for a
# language that doesnt exist. GCC 3.4 supports f77, while 4.0 supports f95, etc.
#
# Travis Tilley <lv@gentoo.org> (26 Oct 2004)
#
gcc-lang-supported() {
	grep ^language=\"${1}\" ${S}/gcc/*/config-lang.in > /dev/null && return 0
	return 1
}

#----<< support checks >>----

#---->> specs + env.d logic <<----

# defaults to enable for all hardened toolchains
gcc_common_hard="-DEFAULT_RELRO -DEFAULT_BIND_NOW"

# configure to build with the hardened GCC specs as the default
make_gcc_hard() {
	if hardened_gcc_works ; then
		einfo "Updating gcc to use automatic PIE + SSP building ..."
		sed -e "s|^HARD_CFLAGS = |HARD_CFLAGS = -DEFAULT_PIE_SSP ${gcc_common_hard} |" \
			-i ${S}/gcc/Makefile.in || die "Failed to update gcc!"
	elif hardened_gcc_works pie ; then
		einfo "Updating gcc to use automatic PIE building ..."
		ewarn "SSP has not been enabled by default"
		sed -e "s|^HARD_CFLAGS = |HARD_CFLAGS = -DEFAULT_PIE ${gcc_common_hard} |" \
			-i ${S}/gcc/Makefile.in || die "Failed to update gcc!"
	elif hardened_gcc_works ssp ; then
		einfo "Updating gcc to use automatic SSP building ..."
		ewarn "PIE has not been enabled by default"
		sed -e "s|^HARD_CFLAGS = |HARD_CFLAGS = -DEFAULT_SSP ${gcc_common_hard} |" \
			-i ${S}/gcc/Makefile.in || die "Failed to update gcc!"
	else
		# do nothing if hardened isnt supported, but dont die either
		ewarn "hardened is not supported for this arch in this gcc version"
		ebeep
		return 0
	fi

	# rebrand to make bug reports easier
	release_version="${release_version/Gentoo/Gentoo Hardened}"
}

create_vanilla_specs_file() {
	pushd "${WORKDIR}"/build/gcc > /dev/null
	if use hardened ; then
		# if using hardened, then we need to move xgcc out of the way
		# and recompile it
		cp Makefile Makefile.orig
		sed -i -e 's/^HARD_CFLAGS.*/HARD_CFLAGS = /g' Makefile
		mv xgcc xgcc.hard
		mv gcc.o gcc.o.hard
		make xgcc
		einfo "Creating a vanilla gcc specs file"
		./xgcc -dumpspecs > "${WORKDIR}"/build/vanilla.specs
		# restore everything to normal
		mv gcc.o.hard gcc.o
		mv xgcc.hard xgcc
		mv Makefile.orig Makefile
	else
		einfo "Creating a vanilla gcc specs file"
		./xgcc -dumpspecs > "${WORKDIR}"/build/vanilla.specs
	fi
	popd > /dev/null
}

create_hardened_specs_file() {
	pushd "${WORKDIR}"/build/gcc > /dev/null
	if ! use hardened ; then
		# if not using hardened, then we need to move xgcc out of the way
		# and recompile it
		cp Makefile Makefile.orig
		sed -i -e "s/^HARD_CFLAGS.*/HARD_CFLAGS = -DEFAULT_PIE_SSP ${gcc_common_hard}/g" Makefile
		mv xgcc xgcc.vanilla
		mv gcc.o gcc.o.vanilla
		make xgcc
		einfo "Creating a hardened gcc specs file"
		./xgcc -dumpspecs > "${WORKDIR}"/build/hardened.specs
		# restore everything to normal
		mv gcc.o.vanilla gcc.o
		mv xgcc.vanilla xgcc
		mv Makefile.orig Makefile
	else
		einfo "Creating a hardened gcc specs file"
		./xgcc -dumpspecs > "${WORKDIR}"/build/hardened.specs
	fi
	popd > /dev/null
}

create_hardenednossp_specs_file() {
	pushd "${WORKDIR}"/build/gcc > /dev/null
	cp Makefile Makefile.orig
	sed -i -e "s/^HARD_CFLAGS.*/HARD_CFLAGS = -DEFAULT_PIE ${gcc_common_hard}/g" Makefile
	mv xgcc xgcc.moo
	mv gcc.o gcc.o.moo
	make xgcc
	einfo "Creating a hardened no-ssp gcc specs file"
	./xgcc -dumpspecs > "${WORKDIR}"/build/hardenednossp.specs
	# restore everything to normal
	mv gcc.o.moo gcc.o
	mv xgcc.moo xgcc
	mv Makefile.orig Makefile
	popd > /dev/null
}

create_hardenednopie_specs_file() {
	pushd "${WORKDIR}"/build/gcc > /dev/null
	cp Makefile Makefile.orig
	sed -i -e "s/^HARD_CFLAGS.*/HARD_CFLAGS = -DEFAULT_SSP ${gcc_common_hard}/g" Makefile
	mv xgcc xgcc.moo
	mv gcc.o gcc.o.moo
	make xgcc
	einfo "Creating a hardened no-pie gcc specs file"
	./xgcc -dumpspecs > "${WORKDIR}"/build/hardenednopie.specs
	# restore everything to normal
	mv gcc.o.moo gcc.o
	mv xgcc.moo xgcc
	mv Makefile.orig Makefile
	popd > /dev/null
}

create_hardenednopiessp_specs_file() {
	pushd "${WORKDIR}"/build/gcc > /dev/null
	cp Makefile Makefile.orig
	sed -i -e "s/^HARD_CFLAGS.*/HARD_CFLAGS = ${gcc_common_hard}/g" Makefile
	mv xgcc xgcc.moo
	mv gcc.o gcc.o.moo
	make xgcc
	einfo "Creating a hardened no-pie no-ssp gcc specs file"
	./xgcc -dumpspecs > "${WORKDIR}"/build/hardenednopiessp.specs
	# restore everything to normal
	mv gcc.o.moo gcc.o
	mv xgcc.moo xgcc
	mv Makefile.orig Makefile
	popd > /dev/null
}

split_out_specs_files() {
	if hardened_gcc_works ; then
		create_hardened_specs_file
		create_vanilla_specs_file
		create_hardenednossp_specs_file
		create_hardenednopie_specs_file
	elif hardened_gcc_works pie ; then
		create_vanilla_specs_file
		create_hardenednossp_specs_file
	elif hardened_gcc_works ssp ; then
		create_vanilla_specs_file
		create_hardenednopie_specs_file
	fi
	create_hardenednopiessp_specs_file
}

create_gcc_env_entry() {
	dodir /etc/env.d/gcc
	local gcc_envd_base="/etc/env.d/gcc/${CTARGET}-${GCC_CONFIG_VER}"

	if [[ -z $1 ]] ; then
		gcc_envd_file="${D}${gcc_envd_base}"
		# I'm leaving the following commented out to remind me that it
		# was an insanely -bad- idea. Stuff broke. GCC_SPECS isnt unset
		# on chroot or in non-toolchain.eclass gcc ebuilds!
		#gcc_specs_file="${LIBPATH}/specs"
		gcc_specs_file=""
	else
		gcc_envd_file="${D}${gcc_envd_base}-$1"
		gcc_specs_file="${LIBPATH}/$1.specs"
	fi

	echo "PATH=\"${BINPATH}\"" > ${gcc_envd_file}
	echo "ROOTPATH=\"${BINPATH}\"" >> ${gcc_envd_file}

	if use multilib && ! has_multilib_profile; then
		LDPATH="${LIBPATH}"
		for path in 32 64 o32 ; do
			[[ -d ${LIBPATH}/${path} ]] && LDPATH="${LDPATH}:${LIBPATH}/${path}"
		done
	else
		local MULTIDIR
		LDPATH="${LIBPATH}"

		# We want to list the default ABI's LIBPATH first so libtool
		# searches that directory first.  This is a temporary
		# workaround for libtool being stupid and using .la's from
		# conflicting ABIs by using the first one in the search path

		# XXX: This breaks when cross-compiling a native compiler (CBUILD != CHOST)

		local abi=${DEFAULT_ABI}
		local MULTIDIR=$(${XGCC} -B./ $(get_abi_CFLAGS ${abi}) --print-multi-directory)
		if [[ ${MULTIDIR} == "." ]] ; then
			LDPATH=${LIBPATH}
		else
			LDPATH=${LIBPATH}/${MULTIDIR}
		fi

		for abi in $(get_all_abis) ; do
			[[ ${abi} == ${DEFAULT_ABI} ]] && continue

			MULTIDIR=$(${XGCC} -B./ $(get_abi_CFLAGS ${abi}) --print-multi-directory)
			if [[ ${MULTIDIR} == "." ]] ; then
				LDPATH=${LDPATH}:${LIBPATH}
			else
				LDPATH=${LDPATH}:${LIBPATH}/${MULTIDIR}
			fi
		done
	fi

	echo "LDPATH=\"${LDPATH}\"" >> ${gcc_envd_file}

	local mbits
	CC=${XGCC} has_m32 && mbits="${mbits:+${mbits} }32"
	CC=${XGCC} has_m64 && mbits="${mbits:+${mbits} }64"
	echo "GCCBITS=\"${mbits}\"" >> ${gcc_envd_file}

	echo "MANPATH=\"${DATAPATH}/man\"" >> ${gcc_envd_file}
	echo "INFOPATH=\"${DATAPATH}/info\"" >> ${gcc_envd_file}
	echo "STDCXX_INCDIR=\"${STDCXX_INCDIR##*/}\"" >> ${gcc_envd_file}

	is_crosscompile && echo "CTARGET=${CTARGET}" >> ${gcc_envd_file}

	# Set which specs file to use
	[[ -n ${gcc_specs_file} ]] && echo "GCC_SPECS=\"${gcc_specs_file}\"" >> ${gcc_envd_file}
}

add_profile_eselect_conf() {
	local compiler_config_file=$1
	local abi=$2
	local specs=$3
	local gcc_specs_file
	local var

	if [[ -z ${specs} ]] ; then
		# I'm leaving the following commented out to remind me that it
		# was an insanely -bad- idea. Stuff broke. GCC_SPECS isnt unset
		# on chroot or in non-toolchain.eclass gcc ebuilds!
		#gcc_specs_file="${LIBPATH}/specs"
		gcc_specs_file=""

		if use hardened ; then
			specs="hardened"
		else
			specs="vanilla"
		fi
	else
		gcc_specs_file="${LIBPATH}/${specs}.specs"
	fi

	echo >> ${compiler_config_file}
	if ! is_multilib ; then
		echo "[${specs}]" >> ${compiler_config_file}
		echo "	ctarget=${CTARGET}" >> ${compiler_config_file}
	else
		echo "[${abi}-${specs}]" >> ${compiler_config_file}
		var="CTARGET_${abi}"
		if [[ -n ${!var} ]] ; then
			echo "	ctarget=${!var}" >> ${compiler_config_file}
		else
			var="CHOST_${abi}"
			if [[ -n ${!var} ]] ; then
				echo "	ctarget=${!var}" >> ${compiler_config_file}
			else
				echo "	ctarget=${CTARGET}" >> ${compiler_config_file}
			fi
		fi
	fi

	local MULTIDIR=$(${XGCC} -B./ $(get_abi_CFLAGS ${abi}) --print-multi-directory)
	local LDPATH=${LIBPATH}
	if [[ ${MULTIDIR} != "." ]] ; then
		LDPATH="${LIBPATH}/${MULTIDIR}"
	fi

	echo "	ldpath=${LDPATH}" >> ${compiler_config_file}

	if [[ -n ${gcc_specs_file} ]] ; then
		echo "	specs=${gcc_specs_file}" >> ${compiler_config_file}
	fi

	var="CFLAGS_${abi}"
	if [[ -n ${!var} ]] ; then
		echo "	cflags=${!var}" >> ${compiler_config_file}
	fi
}

create_eselect_conf() {
	local config_dir="/etc/eselect/compiler"
	local compiler_config_file="${D}/${config_dir}/${CTARGET}-${GCC_CONFIG_VER}.conf"
	local abi

	dodir ${config_dir}

	echo "[global]" > ${compiler_config_file}
	echo "	version=${CTARGET}-${GCC_CONFIG_VER}" >> ${compiler_config_file}
	echo "	binpath=${BINPATH}" >> ${compiler_config_file}
	echo "	manpath=${DATAPATH}/man" >> ${compiler_config_file}
	echo "	infopath=${DATAPATH}/info" >> ${compiler_config_file}
	echo "	alias_cc=gcc" >> ${compiler_config_file}
	echo "	stdcxx_incdir=${STDCXX_INCDIR##*/}" >> ${compiler_config_file}
	echo "	bin_prefix=${CTARGET}" >> ${compiler_config_file}

	if [[ -x "${D}/${BINPATH}/${CTARGET}-g77" ]] ; then
		echo "	alias_gfortran=g77" >> ${compiler_config_file}
	elif [[ -x "${D}/${BINPATH}/${CTARGET}-gfortran" ]] ; then
		echo "	alias_g77=gfortran" >> ${compiler_config_file}
	fi

	for abi in $(get_all_abis) ; do
		add_profile_eselect_conf "${compiler_config_file}" "${abi}"

		if want_split_specs ; then
			if use hardened ; then
				add_profile_eselect_conf "${compiler_config_file}" "${abi}" vanilla
			elif hardened_gcc_works ; then
				add_profile_eselect_conf "${compiler_config_file}" "${abi}" hardened
			fi

			if hardened_gcc_works || hardened_gcc_works pie ; then
				add_profile_eselect_conf "${compiler_config_file}" "${abi}" hardenednossp
			fi

			if hardened_gcc_works || hardened_gcc_works ssp ; then
				add_profile_eselect_conf "${compiler_config_file}" "${abi}" hardenednopie
			fi

			add_profile_eselect_conf "${compiler_config_file}" "${abi}" hardenednopiessp
		fi
	done
}

#----<< specs + env.d logic >>----

#---->> pkg_* <<----
gcc_pkg_setup() {
	[[ -z ${ETYPE} ]] && die "Your ebuild needs to set the ETYPE variable"

	if [[ ( $(tc-arch) == "amd64" || $(tc-arch) == "ppc64" ) && ( ${LD_PRELOAD} == "/lib/libsandbox.so" || ${LD_PRELOAD} == "/usr/lib/libsandbox.so" ) ]] && is_multilib ; then
		eerror "Sandbox in your installed portage does not support compilation."
		eerror "of a multilib gcc.  Please set FEATURES=-sandbox and try again."
		eerror "After you have a multilib gcc, re-emerge portage to have a working sandbox."
		die "No 32bit sandbox.  Retry with FEATURES=-sandbox."
	fi

	if [[ ${ETYPE} == "gcc-compiler" ]] ; then
		case $(tc-arch) in
		mips)
			# Must compile for mips64-linux target if we want n32/n64 support
			case "${CTARGET}" in
				mips64*) ;;
				*)
					if use n32 || use n64; then
						eerror "n32/n64 can only be used when target host is mips64*-*-linux-*";
						die "Invalid USE flags for CTARGET ($CTARGET)";
					fi
				;;
			esac

			#cannot have both n32 & n64 without multilib
			if use n32 && use n64 && ! is_multilib; then
				eerror "Please enable multilib if you want to use both n32 & n64";
				die "Invalid USE flag combination";
			fi
		;;
		esac

		# Setup variables which would normally be in the profile
		if is_crosscompile ; then
			multilib_env ${CTARGET}
			if ! use multilib ; then
				MULTILIB_ABIS=${DEFAULT_ABI}
			fi
		fi

		# we dont want to use the installed compiler's specs to build gcc!
		unset GCC_SPECS
	fi

	want_libssp && libc_has_ssp && \
		die "libssp cannot be used with a glibc that has been patched to provide ssp symbols"
}

gcc-compiler_pkg_preinst() {
	:
}

gcc-compiler_pkg_postinst() {
	export LD_LIBRARY_PATH=${LIBPATH}:${LD_LIBRARY_PATH}

	if has_version 'app-admin/eselect-compiler' ; then
		do_eselect_compiler
	else
		do_gcc_config
	fi

	echo
	einfo "If you have issues with packages unable to locate libstdc++.la,"
	einfo "then try running 'fix_libtool_files.sh' on the old gcc versions."
	echo

	# If our gcc-config version doesn't like '-' in it's version string,
	# tell our users that gcc-config will yell at them, but it's all good.
	if ! has_version '>=sys-devel/gcc-config-1.3.10-r1' && [[ ${GCC_CONFIG_VER/-/} != ${GCC_CONFIG_VER} ]] ; then
		ewarn "Your version of gcc-config will issue about having an invalid profile"
		ewarn "when switching to this profile.  It is safe to ignore this warning,"
		ewarn "and this problem has been corrected in >=sys-devel/gcc-config-1.3.10-r1."
	fi

	if ! is_crosscompile && ! use multislot && [[ ${GCCMAJOR}.${GCCMINOR} == 3.4 ]] ; then
		echo
		einfo "You should make sure to rebuild all your C++ packages when"
		einfo "upgrading between different versions of gcc.  For example,"
		einfo "when moving to gcc-3.4 from gcc-3.3, emerge gentoolkit and run:"
		einfo "  # revdep-rebuild --library libstdc++.so.5"
		echo
		einfo "For more information on the steps to take when upgrading "
		einfo "from gcc-3.3 please refer to: "
		einfo "http://www.gentoo.org/doc/en/gcc-upgrading.xml"
		echo
	fi
}

gcc-compiler_pkg_prerm() {
	# TODO: flesh this out when I care
	return 0
}

gcc-compiler_pkg_postrm() {
	# to make our lives easier (and saner), we do the fix_libtool stuff here.
	# rather than checking SLOT's and trying in upgrade paths, we just see if
	# the common libstdc++.la exists in the ${LIBPATH} of the gcc that we are
	# unmerging.  if it does, that means this was a simple re-emerge.

	# clean up the cruft left behind by cross-compilers
	if is_crosscompile ; then
		if [[ -z $(ls "${ROOT}"/etc/env.d/gcc/${CTARGET}* 2>/dev/null) ]] ; then
			rm -f "${ROOT}"/etc/env.d/gcc/config-${CTARGET}
			rm -f "${ROOT}"/etc/env.d/??gcc-${CTARGET}
			rm -f "${ROOT}"/usr/bin/${CTARGET}-{gcc,{g,c}++}{,32,64}
		fi
		return 0
	fi

	# ROOT isnt handled by the script
	[[ ${ROOT} != "/" ]] && return 0

	if [[ ! -e ${LIBPATH}/libstdc++.la ]] ; then
		/sbin/fix_libtool_files.sh ${GCC_RELEASE_VER}
		[[ -z ${BRANCH_UPDATE} ]] || /sbin/fix_libtool_files.sh ${GCC_RELEASE_VER}-${BRANCH_UPDATE}
	fi

	return 0
}

#---->> pkg_* <<----

#---->> src_* <<----

# generic GCC src_unpack, to be called from the ebuild's src_unpack.
# BIG NOTE regarding hardened support: ebuilds with support for hardened are
# expected to export the following variable:
#
#	HARDENED_GCC_WORKS
#			This variable should be set to the archs on which hardened should
#			be allowed. For example: HARDENED_GCC_WORKS="x86 sparc amd64"
#			This allows for additional archs to be supported by hardened when
#			ready.
#
# Travis Tilley <lv@gentoo.org> (03 Sep 2004)
#
gcc-compiler_src_unpack() {
	# fail if using pie patches, building hardened, and glibc doesnt have
	# the necessary support
	want_pie && use hardened && glibc_have_pie

	if use hardened ; then
		einfo "updating configuration to build hardened GCC"
		make_gcc_hard || die "failed to make gcc hard"
	fi
}
gcc-library_src_unpack() {
	:
}
guess_patch_type_in_dir() {
	[[ -n $(ls "$1"/*.bz2 2>/dev/null) ]] \
		&& EPATCH_SUFFIX="patch.bz2" \
		|| EPATCH_SUFFIX="patch"
}
gcc_src_unpack() {
	local release_version="Gentoo ${GCC_PVR}"

	[[ -z ${UCLIBC_VER} ]] && is_uclibc && die "Sorry, this version does not support uClibc"

	gcc_quick_unpack
	exclude_gcc_patches

	cd ${S:=$(gcc_get_s_dir)}

	if ! use vanilla ; then
		if [[ -n ${PATCH_VER} ]] ; then
			guess_patch_type_in_dir "${WORKDIR}"/patch
			EPATCH_MULTI_MSG="Applying Gentoo patches ..." \
			epatch "${WORKDIR}"/patch
		fi
		if [[ -n ${UCLIBC_VER} ]] ; then
			guess_patch_type_in_dir "${WORKDIR}"/uclibc
			EPATCH_MULTI_MSG="Applying uClibc patches ..." \
			epatch "${WORKDIR}"/uclibc
		fi
	fi
	do_gcc_HTB_patches
	do_gcc_SSP_patches
	do_gcc_PIE_patches

	${ETYPE}_src_unpack || die "failed to ${ETYPE}_src_unpack"

	fix_files=""
	for x in contrib/test_summary libstdc++-v3/scripts/check_survey.in ; do
		[[ -e ${x} ]] && fix_files="${fix_files} ${x}"
	done
	ht_fix_file ${fix_files} */configure *.sh

	if ! is_crosscompile && is_multilib && \
	   [[ ( $(tc-arch) == "amd64" || $(tc-arch) == "ppc64" ) && -z ${SKIP_MULTILIB_HACK} ]] ; then
		disgusting_gcc_multilib_HACK || die "multilib hack failed"
	fi

	local version_string=${GCC_CONFIG_VER}

	# Backwards support... add the BRANCH_UPDATE for 3.3.5-r1 and 3.4.3-r1
	# which set it directly rather than using ${GCC_PV}
	if [[ ${GCC_PVR} == "3.3.5-r1" || ${GCC_PVR} = "3.4.3-r1" ]] ; then
		 version_string="${version_string} ${BRANCH_UPDATE}"
	fi


	einfo "patching gcc version: ${version_string} (${release_version})"
	gcc_version_patch "${version_string}" "${release_version}"

	# Misdesign in libstdc++ (Redhat)
	if [[ ${GCCMAJOR} -ge 3 ]] && [[ -e ${S}/libstdc++-v3/config/cpu/i486/atomicity.h ]] ; then
		cp -pPR "${S}"/libstdc++-v3/config/cpu/i{4,3}86/atomicity.h
	fi

	# disable --as-needed from being compiled into gcc specs
	# natively when using a gcc version < 3.4.4
	# http://gcc.gnu.org/bugzilla/show_bug.cgi?id=14992
	if [[ ${GCCMAJOR} < 3 ]] || \
	   [[ ${GCCMAJOR}.${GCCMINOR} < 3.4 ]] || \
	   [[ ${GCCMAJOR}.${GCCMINOR}.${GCCMICRO} < 3.4.4 ]]
	then
		sed -i -e s/HAVE_LD_AS_NEEDED/USE_LD_AS_NEEDED/g "${S}"/gcc/config.in
	fi

	# Fixup libtool to correctly generate .la files with portage
	cd "${S}"
	elibtoolize --portage --shallow --no-uclibc

	gnuconfig_update

	# update configure files
	einfo "Fixing misc issues in configure files"
	for f in $(grep -l 'autoconf version 2.13' $(find "${S}" -name configure)) ; do
		ebegin "  Updating ${f/${S}\/}"
		patch "${f}" "${GCC_FILESDIR}"/gcc-configure-LANG.patch >& "${T}"/configure-patch.log \
			|| eerror "Please file a bug about this"
		eend $?
	done

	./contrib/gcc_update --touch &> /dev/null

	disable_multilib_libjava || die "failed to disable multilib java"
}

gcc-library-configure() {
	# multilib support
	[[ ${GCC_TARGET_NO_MULTILIB} == "true" ]] \
		&& confgcc="${confgcc} --disable-multilib" \
		|| confgcc="${confgcc} --enable-multilib"
}

gcc-compiler-configure() {
	# multilib support
	if is_multilib || [[ ${CTARGET} == "avr" ]] ; then
		confgcc="${confgcc} --enable-multilib"
	else
		confgcc="${confgcc} --disable-multilib"
	fi

	if tc_version_is_at_least "4.0" ; then
		confgcc="${confgcc} $(use_enable mudflap libmudflap)"

		if want_libssp ; then
			confgcc="${confgcc} --enable-libssp"
		else
			export gcc_cv_libc_provides_ssp=yes
			confgcc="${confgcc} --disable-libssp"
		fi
	fi

	# GTK+ is preferred over xlib in 3.4.x (xlib is unmaintained
	# right now). Much thanks to <csm@gnu.org> for the heads up.
	# Travis Tilley <lv@gentoo.org>  (11 Jul 2004)
	if ! is_gcj ; then
		confgcc="${confgcc} --disable-libgcj"
	elif use gtk ; then
		confgcc="${confgcc} --enable-java-awt=gtk"
	fi

	case $(tc-arch) in
		# Add --with-abi flags to set default MIPS ABI
		mips)
		local mips_abi=""
		use n64 && mips_abi="--with-abi=64"
		use n32 && mips_abi="--with-abi=n32"
		[[ -n ${mips_abi} ]] && confgcc="${confgcc} ${mips_abi}"
		;;
		# Enable sjlj exceptions for backward compatibility on hppa
		hppa)
			[[ ${GCC_PV:0:1} == "3" ]] && \
			confgcc="${confgcc} --enable-sjlj-exceptions"
		;;
	esac

	GCC_LANG="c"
	is_cxx && GCC_LANG="${GCC_LANG},c++"
	is_gcj && GCC_LANG="${GCC_LANG},java"
	if is_objc || is_objcxx ; then
		GCC_LANG="${GCC_LANG},objc"
		use objc-gc && confgcc="${confgcc} --enable-objc-gc"
		is_objcxx && GCC_LANG="${GCC_LANG},obj-c++"
	fi

	# fortran support just got sillier! the lang value can be f77 for
	# fortran77, f95 for fortran95, or just plain old fortran for the
	# currently supported standard depending on gcc version.
	is_fortran && GCC_LANG="${GCC_LANG},fortran"
	is_f77 && GCC_LANG="${GCC_LANG},f77"
	is_f95 && GCC_LANG="${GCC_LANG},f95"

	# We do NOT want 'ADA support' in here!
	# is_ada && GCC_LANG="${GCC_LANG},ada"

	einfo "configuring for GCC_LANG: ${GCC_LANG}"
}

# Other than the variables described for gcc_setup_variables, the following
# will alter tha behavior of gcc_do_configure:
#
#	CTARGET
#	CBUILD
#			Enable building for a target that differs from CHOST
#
#	GCC_TARGET_NO_MULTILIB
#			Disable multilib. Useful when building single library targets.
#
#	GCC_LANG
#			Enable support for ${GCC_LANG} languages. defaults to just "c"
#
# Travis Tilley <lv@gentoo.org> (04 Sep 2004)
#
gcc_do_configure() {
	local confgcc

	# Set configuration based on path variables
	confgcc="${confgcc} \
		--prefix=${PREFIX} \
		--bindir=${BINPATH} \
		--includedir=${INCLUDEPATH} \
		--datadir=${DATAPATH} \
		--mandir=${DATAPATH}/man \
		--infodir=${DATAPATH}/info \
		--with-gxx-include-dir=${STDCXX_INCDIR}"

	# All our cross-compile logic goes here !  woo !
	confgcc="${confgcc} --host=${CHOST}"
	if is_crosscompile || tc-is-cross-compiler ; then
		# Straight from the GCC install doc:
		# "GCC has code to correctly determine the correct value for target
		# for nearly all native systems. Therefore, we highly recommend you
		# not provide a configure target when configuring a native compiler."
		confgcc="${confgcc} --target=${CTARGET}"
	fi
	[[ -n ${CBUILD} ]] && confgcc="${confgcc} --build=${CBUILD}"

	# ppc altivec support
	confgcc="${confgcc} $(use_enable altivec)"

	[[ ${CTARGET} == *-softfloat-* ]] && confgcc="${confgcc} --with-float=soft"

	# Native Language Support
	if use nls && ! use build ; then
		confgcc="${confgcc} --enable-nls --without-included-gettext"
	else
		confgcc="${confgcc} --disable-nls"
	fi

	# reasonably sane globals (hopefully)
	# --disable-libunwind-exceptions needed till unwind sections get fixed. see ps.m for details
	confgcc="${confgcc} \
		--with-system-zlib \
		--disable-checking \
		--disable-werror \
		--disable-libunwind-exceptions"

	# etype specific configuration
	einfo "running ${ETYPE}-configure"
	${ETYPE}-configure || die

	# if not specified, assume we are building for a target that only
	# requires C support
	GCC_LANG=${GCC_LANG:-c}
	confgcc="${confgcc} --enable-languages=${GCC_LANG}"

	if is_crosscompile ; then
		# When building a stage1 cross-compiler (just C compiler), we have to
		# disable a bunch of features or gcc goes boom
		local needed_libc=""
		case ${CTARGET} in
			*-dietlibc) needed_libc=dietlibc;;
			*-freebsd*) needed_libc=freebsd-lib;;
			*-gnu)      needed_libc=glibc;;
			*-klibc)    needed_libc=klibc;;
			*-uclibc)   needed_libc=uclibc;;
			avr)        confgcc="${confgcc} --enable-shared --disable-threads";;
		esac
		if [[ -n ${needed_libc} ]] ; then
			if ! has_version ${CATEGORY}/${needed_libc} ; then
				confgcc="${confgcc} --disable-shared --disable-threads --without-headers"
			elif built_with_use ${CATEGORY}/${needed_libc} _E_CROSS_HEADERS_ONLY ; then
				confgcc="${confgcc} --disable-shared --with-sysroot=${PREFIX}/${CTARGET}"
			else
				confgcc="${confgcc} --with-sysroot=${PREFIX}/${CTARGET}"
			fi
		fi
	else
		confgcc="${confgcc} --enable-shared --enable-threads=posix"
	fi
	# __cxa_atexit is "essential for fully standards-compliant handling of
	# destructors", but apparently requires glibc.
	# --enable-sjlj-exceptions : currently the unwind stuff seems to work
	# for statically linked apps but not dynamic
	# so use setjmp/longjmp exceptions by default
	if is_uclibc ; then
		confgcc="${confgcc} --disable-__cxa_atexit --enable-target-optspace"
		[[ ${GCCMAJOR}.${GCCMINOR} == 3.3 ]] && \
			confgcc="${confgcc} --enable-sjlj-exceptions"
	else
		confgcc="${confgcc} --enable-__cxa_atexit"
	fi
	[[ ${CTARGET} == *-gnu* ]] && confgcc="${confgcc} --enable-clocale=gnu"
	[[ ${CTARGET} == *-uclibc* ]] && [[ ${GCCMAJOR}.${GCCMINOR} > 3.3 ]] \
		&& confgcc="${confgcc} --enable-clocale=uclibc"

	# Nothing wrong with a good dose of verbosity
	echo
	einfo "PREFIX:          ${PREFIX}"
	einfo "BINPATH:         ${BINPATH}"
	einfo "LIBPATH:         ${LIBPATH}"
	einfo "DATAPATH:        ${DATAPATH}"
	einfo "STDCXX_INCDIR:   ${STDCXX_INCDIR}"
	echo
	einfo "Configuring GCC with: ${confgcc//--/\n\t--} ${@} ${EXTRA_ECONF}"
	echo

	# Build in a separate build tree
	mkdir -p "${WORKDIR}"/build
	pushd "${WORKDIR}"/build > /dev/null

	# and now to do the actual configuration
	addwrite /dev/zero
	"${S}"/configure ${confgcc} $@ ${EXTRA_ECONF} \
		|| die "failed to run configure"

	# return to whatever directory we were in before
	popd > /dev/null
}

# This function accepts one optional argument, the make target to be used.
# If ommitted, gcc_do_make will try to guess whether it should use all,
# profiledbootstrap, or bootstrap-lean depending on CTARGET and arch. An
# example of how to use this function:
#
#	gcc_do_make all-target-libstdc++-v3
#
# In addition to the target to be used, the following variables alter the
# behavior of this function:
#
#	LDFLAGS
#			Flags to pass to ld
#
#	STAGE1_CFLAGS
#			CFLAGS to use during stage1 of a gcc bootstrap
#
#	BOOT_CFLAGS
#			CFLAGS to use during stages 2+3 of a gcc bootstrap.
#
# Travis Tilley <lv@gentoo.org> (04 Sep 2004)
#
gcc_do_make() {
	# Fix for libtool-portage.patch
	local OLDS=${S}
	S=${WORKDIR}/build

	# Set make target to $1 if passed
	[[ -n $1 ]] && GCC_MAKE_TARGET=$1
	# default target
	if is_crosscompile || tc-is-cross-compiler ; then
		# 3 stage bootstrapping doesnt quite work when you cant run the
		# resulting binaries natively ^^;
		GCC_MAKE_TARGET=${GCC_MAKE_TARGET-all}
	elif [[ $(tc-arch) == "x86" || $(tc-arch) == "amd64" || $(tc-arch) == "ppc64" ]] \
	     && [[ ${GCCMAJOR}.${GCCMINOR} > 3.3 ]]
	then
		GCC_MAKE_TARGET=${GCC_MAKE_TARGET-profiledbootstrap}
	else
		GCC_MAKE_TARGET=${GCC_MAKE_TARGET-bootstrap-lean}
	fi

	# the gcc docs state that parallel make isnt supported for the
	# profiledbootstrap target, as collisions in profile collecting may occur.
	[[ ${GCC_MAKE_TARGET} == "profiledbootstrap" ]] && export MAKEOPTS="${MAKEOPTS} -j1"

	# boundschecking seems to introduce parallel build issues
	want_boundschecking && export MAKEOPTS="${MAKEOPTS} -j1"

	if [[ ${GCC_MAKE_TARGET} == "all" ]] ; then
		STAGE1_CFLAGS=${STAGE1_CFLAGS-"${CFLAGS}"}
	elif [[ $(gcc-version) == "3.4" && ${GCC_BRANCH_VER} == "3.4" ]] && has_hardened ; then
		# See bug #79852
		STAGE1_CFLAGS=${STAGE1_CFLAGS-"-O2"}
	else
		STAGE1_CFLAGS=${STAGE1_CFLAGS-"-O"}
	fi

	if is_crosscompile; then
		# In 3.4, BOOT_CFLAGS is never used on a crosscompile...
		# but I'll leave this in anyways as someone might have had
		# some reason for putting it in here... --eradicator
		BOOT_CFLAGS=${BOOT_CFLAGS-"-O2"}
	else
		# we only want to use the system's CFLAGS if not building a
		# cross-compiler.
		BOOT_CFLAGS=${BOOT_CFLAGS-"$(get_abi_CFLAGS) ${CFLAGS}"}
	fi

	pushd "${WORKDIR}"/build
	einfo "Running make LDFLAGS=\"${LDFLAGS}\" STAGE1_CFLAGS=\"${STAGE1_CFLAGS}\" LIBPATH=\"${LIBPATH}\" BOOT_CFLAGS=\"${BOOT_CFLAGS}\" ${GCC_MAKE_TARGET}"

	emake \
		LDFLAGS="${LDFLAGS}" \
		STAGE1_CFLAGS="${STAGE1_CFLAGS}" \
		LIBPATH="${LIBPATH}" \
		BOOT_CFLAGS="${BOOT_CFLAGS}" \
		${GCC_MAKE_TARGET} \
		|| die "emake failed with ${GCC_MAKE_TARGET}"

	if ! use build && ! is_crosscompile && ! use nocxx && use doc ; then
		if type -p doxygen > /dev/null ; then
			cd "${CTARGET}"/libstdc++-v3
			make doxygen-man || ewarn "failed to make docs"
		else
			ewarn "Skipping libstdc++ manpage generation since you don't have doxygen installed"
		fi
	fi

	popd
}

# This function will add ${GCC_CONFIG_VER} to the names of all shared libraries in the
# directory specified to avoid filename collisions between multiple slotted
# non-versioned gcc targets. If no directory is specified, it is assumed that
# you want -all- shared objects to have ${GCC_CONFIG_VER} added. Example
#
#	add_version_to_shared ${D}/usr/$(get_libdir)
#
# Travis Tilley <lv@gentoo.org> (05 Sep 2004)
#
add_version_to_shared() {
	local sharedlib sharedlibdir
	[[ -z $1 ]] \
		&& sharedlibdir=${D} \
		|| sharedlibdir=$1

	for sharedlib in $(find ${sharedlibdir} -name *.so.*) ; do
		if [[ ! -L ${sharedlib} ]] ; then
			einfo "Renaming `basename "${sharedlib}"` to `basename "${sharedlib/.so*/}-${GCC_CONFIG_VER}.so.${sharedlib/*.so./}"`"
			mv "${sharedlib}" "${sharedlib/.so*/}-${GCC_CONFIG_VER}.so.${sharedlib/*.so./}" \
				|| die
			pushd `dirname "${sharedlib}"` > /dev/null || die
			ln -sf "`basename "${sharedlib/.so*/}-${GCC_CONFIG_VER}.so.${sharedlib/*.so./}"`" \
				"`basename "${sharedlib}"`" || die
			popd > /dev/null || die
		fi
	done
}

# This is mostly a stub function to be overwritten in an ebuild
gcc_do_filter_flags() {
	strip-flags

	# In general gcc does not like optimization, and add -O2 where
	# it is safe.  This is especially true for gcc 3.3 + 3.4
	replace-flags -O? -O2

	# ... sure, why not?
	strip-unsupported-flags

	# dont want to funk ourselves
	filter-flags '-mabi*' -m31 -m32 -m64

	case ${GCC_BRANCH_VER} in
	3.2|3.3)
		case $(tc-arch) in
			x86)   filter-flags '-mtune=*';;
			amd64) filter-flags '-mtune=*'
			       replace-cpu-flags k8 athlon64 opteron i686;;
		esac
		;;
	3.4|4.*)
		case $(tc-arch) in
			x86|amd64) filter-flags '-mcpu=*';;
		esac
		;;
	esac

	# Compile problems with these (bug #6641 among others)...
	#filter-flags "-fno-exceptions -fomit-frame-pointer -fforce-addr"

	# CFLAGS logic (verified with 3.4.3):
	# CFLAGS:
	#   This conflicts when creating a crosscompiler, so set to a sane
	#     default in this case:
	#   used in ./configure and elsewhere for the native compiler
	#   used by gcc when creating libiberty.a
	#   used by xgcc when creating libstdc++ (and probably others)!
	#     this behavior should be removed...
	#
	# CXXFLAGS:
	#   used by xgcc when creating libstdc++
	#
	# STAGE1_CFLAGS (not used in creating a crosscompile gcc):
	#   used by ${CHOST}-gcc for building stage1 compiler
	#
	# BOOT_CFLAGS (not used in creating a crosscompile gcc):
	#   used by xgcc for building stage2/3 compiler

	if is_crosscompile ; then
		# Set this to something sane for both native and target
		CFLAGS="-O2 -pipe"

		local VAR="CFLAGS_"${CTARGET//-/_}
		CXXFLAGS=${!VAR}
	fi

	export GCJFLAGS=${GCJFLAGS:-${CFLAGS}}
}

gcc_src_compile() {
	gcc_do_filter_flags
	einfo "CFLAGS=\"${CFLAGS}\""
	einfo "CXXFLAGS=\"${CXXFLAGS}\""

	# Build in a separate build tree
	mkdir -p "${WORKDIR}"/build
	pushd "${WORKDIR}"/build > /dev/null

	# Install our pre generated manpages if we do not have perl ...
	[[ ! -x /usr/bin/perl ]] && [[ -n ${MAN_VER} ]] && \
		unpack gcc-${MAN_VER}-manpages.tar.bz2

	einfo "Configuring ${PN} ..."
	gcc_do_configure

	touch ${S}/gcc/c-gperf.h

	# Do not make manpages if we do not have perl ...
	[[ ! -x /usr/bin/perl ]] \
		&& find "${WORKDIR}"/build -name '*.[17]' | xargs touch

	einfo "Compiling ${PN} ..."
	gcc_do_make ${GCC_MAKE_TARGET}

	# Do not create multiple specs files for PIE+SSP if boundschecking is in
	# USE, as we disable PIE+SSP when it is.
	if [[ ${ETYPE} == "gcc-compiler" ]] && want_split_specs ; then
		split_out_specs_files || die "failed to split out specs"
	fi

	popd > /dev/null
}

gcc_src_test() {
	cd "${WORKDIR}"/build
	make check || ewarn "check failed and that sucks :("
}

gcc-library_src_install() {
	einfo "Installing ${PN} ..."
	# Do the 'make install' from the build directory
	cd "${WORKDIR}"/build
	S=${WORKDIR}/build \
	make DESTDIR="${D}" \
		prefix=${PREFIX} \
		bindir=${BINPATH} \
		includedir=${LIBPATH}/include \
		datadir=${DATAPATH} \
		mandir=${DATAPATH}/man \
		infodir=${DATAPATH}/info \
		LIBPATH="${LIBPATH}" \
		${GCC_INSTALL_TARGET} || die

	if [[ ${GCC_LIB_COMPAT_ONLY} == "true" ]] ; then
		rm -rf "${D}"${INCLUDEPATH}
		rm -rf "${D}"${DATAPATH}
		pushd "${D}"${LIBPATH}/
		rm *.a *.la *.so
		popd
	fi

	if [[ -n ${GCC_LIB_USE_SUBDIR} ]] ; then
		mkdir -p "${WORKDIR}"/${GCC_LIB_USE_SUBDIR}/
		mv "${D}"${LIBPATH}/* "${WORKDIR}"/${GCC_LIB_USE_SUBDIR}/
		mv "${WORKDIR}"/${GCC_LIB_USE_SUBDIR}/ "${D}"${LIBPATH}

		dodir /etc/env.d
		echo "LDPATH=\"${LIBPATH}/${GCC_LIB_USE_SUBDIR}/\"" >> "${D}"/etc/env.d/99${PN}
	fi

	if [[ ${GCC_VAR_TYPE} == "non-versioned" ]] ; then
		# if we're not using versioned directories, we need to use versioned
		# filenames.
		add_version_to_shared
	fi
}

gcc-compiler_src_install() {
	local x=

	# Do allow symlinks in ${PREFIX}/lib/gcc-lib/${CHOST}/${GCC_CONFIG_VER}/include as
	# this can break the build.
	for x in "${WORKDIR}"/build/gcc/include/* ; do
		[[ -L ${x} ]] && rm -f "${x}"
	done
	# Remove generated headers, as they can cause things to break
	# (ncurses, openssl, etc).
	for x in $(find "${WORKDIR}"/build/gcc/include/ -name '*.h') ; do
		grep -q 'It has been auto-edited by fixincludes from' "${x}" \
			&& rm -f "${x}"
	done
	einfo "Installing GCC..."
	# Do the 'make install' from the build directory
	cd "${WORKDIR}"/build
	S=${WORKDIR}/build \
	make DESTDIR="${D}" install || die
	# Punt some tools which are really only useful while building gcc
	rm -r "${D}${LIBEXECPATH}"/install-tools
	# This one comes with binutils
	find "${D}" -name libiberty.a -exec rm -f {} \;

	# Move the libraries to the proper location
	gcc_movelibs

	# Now do the fun stripping stuff
	env RESTRICT="" STRIP=${CHOST}-strip prepstrip "${D}${BINPATH}" "${D}${LIBEXECPATH}"
	env RESTRICT="" STRIP=${CTARGET}-strip prepstrip "${D}${LIBPATH}"

	# Basic sanity check
	is_crosscompile || [[ -r ${D}${BINPATH}/gcc ]] || die "gcc not found in ${D}"

	dodir /lib /usr/bin
	dodir /etc/env.d/gcc
	create_gcc_env_entry

	if want_split_specs ; then
		if use hardened ; then
			create_gcc_env_entry vanilla
		fi
		! use hardened && hardened_gcc_works && create_gcc_env_entry hardened
		if hardened_gcc_works || hardened_gcc_works pie ; then
			create_gcc_env_entry hardenednossp
		fi
		if hardened_gcc_works || hardened_gcc_works ssp ; then
			create_gcc_env_entry hardenednopie
		fi
		create_gcc_env_entry hardenednopiessp

		cp "${WORKDIR}"/build/*.specs "${D}"${LIBPATH}
	fi

	# Make sure we dont have stuff lying around that
	# can nuke multiple versions of gcc
	if ! use build ; then
		cd ${D}${LIBPATH}

		# Move Java headers to compiler-specific dir
		for x in ${D}${PREFIX}/include/gc*.h ${D}${PREFIX}/include/j*.h ; do
			[[ -f ${x} ]] && mv -f "${x}" ${D}${LIBPATH}/include/
		done
		for x in gcj gnu java javax org ; do
			if [[ -d ${D}${PREFIX}/include/${x} ]] ; then
				dodir /${LIBPATH}/include/${x}
				mv -f ${D}${PREFIX}/include/${x}/* ${D}${LIBPATH}/include/${x}/
				rm -rf ${D}${PREFIX}/include/${x}
			fi
		done

		if [[ -d ${D}${PREFIX}/lib/security ]] ; then
			dodir /${LIBPATH}/security
			mv -f ${D}${PREFIX}/lib/security/* ${D}${LIBPATH}/security
			rm -rf ${D}${PREFIX}/lib/security
		fi

		# Move libgcj.spec to compiler-specific directories
		[[ -f ${D}${PREFIX}/lib/libgcj.spec ]] && \
			mv -f ${D}${PREFIX}/lib/libgcj.spec ${D}${LIBPATH}/libgcj.spec

		# Rename jar because it could clash with Kaffe's jar if this gcc is
		# primary compiler (aka don't have the -<version> extension)
		cd ${D}${PREFIX}/${CTARGET}/gcc-bin/${GCC_CONFIG_VER}
		[[ -f jar ]] && mv -f jar gcj-jar

		# Move <cxxabi.h> to compiler-specific directories
		[[ -f ${D}${STDCXX_INCDIR}/cxxabi.h ]] && \
			mv -f ${D}${STDCXX_INCDIR}/cxxabi.h ${D}${LIBPATH}/include/

		# These should be symlinks
		dodir /usr/bin
		cd "${D}"${BINPATH}
		for x in gcc g++ c++ g77 gcj gcjh gfortran ; do
			# For some reason, g77 gets made instead of ${CTARGET}-g77...
			# this should take care of that
			[[ -f ${x} ]] && mv ${x} ${CTARGET}-${x}

			if [[ -f ${CTARGET}-${x} ]] && ! is_crosscompile; then
				ln -sf ${CTARGET}-${x} ${x}

				# Create version-ed symlinks
				dosym ${BINPATH}/${CTARGET}-${x} \
					/usr/bin/${CTARGET}-${x}-${GCC_CONFIG_VER}
				dosym ${BINPATH}/${CTARGET}-${x} \
					/usr/bin/${x}-${GCC_CONFIG_VER}
			fi

			if [[ -f ${CTARGET}-${x}-${GCC_CONFIG_VER} ]] ; then
				rm -f ${CTARGET}-${x}-${GCC_CONFIG_VER}
				ln -sf ${CTARGET}-${x} ${CTARGET}-${x}-${GCC_CONFIG_VER}
			fi
		done

		# I do not know if this will break gcj stuff, so I'll only do it for
		#   objc for now; basically "ffi.h" is the correct file to include,
		#   but it gets installed in .../GCCVER/include and yet it does
		#   "#include <ffitarget.h>" which (correctly, as it's an "extra" file)
		#   is installed in .../GCCVER/include/libffi; the following fixes
		#   ffi.'s include of ffitarget.h - Armando Di Cianno <fafhrd@gentoo.org>
		if is_objc && ! is_gcj ; then
			#dosed "s:<ffitarget.h>:<libffi/ffitarget.h>:g" /${LIBPATH}/include/ffi.h
			mv "${D}"${LIBPATH}/include/libffi/* "${D}"${LIBPATH}/include
			rm -Rf "${D}"${LIBPATH}/include/libffi
		fi
	fi

	cd "${S}"
	if use build || is_crosscompile; then
		rm -rf "${D}"/usr/share/{man,info}
		rm -rf "${D}"${DATAPATH}/{man,info}
	else
		local cxx_mandir=${WORKDIR}/build/${CTARGET}/libstdc++-v3/docs/doxygen/man
		if [[ -d ${cxx_mandir} ]] ; then
			# clean bogus manpages #113902
			find "${cxx_mandir}" -name '*_build_*' -exec rm {} \;
			cp -r "${cxx_mandir}"/man? "${D}/${DATAPATH}"/man/
		fi
		has noinfo ${FEATURES} \
			&& rm -r "${D}/${DATAPATH}"/info \
			|| prepinfo "${DATAPATH}"
		has noman ${FEATURES} \
			&& rm -r "${D}/${DATAPATH}"/man \
			|| prepman "${DATAPATH}"
	fi

	# Rather install the script, else portage with changing $FILESDIR
	# between binary and source package borks things ....
	if ! is_crosscompile; then
		insinto /lib/rcscripts/awk
		doins "${GCC_FILESDIR}"/awk/fixlafiles.awk
		exeinto /sbin
		doexe "${GCC_FILESDIR}"/fix_libtool_files.sh
	fi

	# use gid of 0 because some stupid ports don't have
	# the group 'root' set to gid 0
	chown -R root:0 "${D}"${LIBPATH}

	# Create config files for eselect-compiler
	create_eselect_conf
}

# Move around the libs to the right location.  For some reason,
# when installing gcc, it dumps internal libraries into /usr/lib
# instead of the private gcc lib path
gcc_movelibs() {
	# XXX: This breaks when cross-compiling a native compiler (CBUILD != CHOST)

	local multiarg
	for multiarg in $(${XGCC} -print-multi-lib) ; do
		multiarg=${multiarg#*;}
		multiarg=${multiarg//@/ -}

		local OS_MULTIDIR=$(${XGCC} -B./ ${multiarg} --print-multi-os-directory)
		local MULTIDIR=$(${XGCC} -B./ ${multiarg} --print-multi-directory)
		local TODIR=${D}${LIBPATH}/${MULTIDIR}
		local FROMDIR=

		[[ -d ${TODIR} ]] || mkdir -p ${TODIR}

		for FROMDIR in \
			${LIBPATH}/${OS_MULTIDIR} \
			${LIBPATH}/../${MULTIDIR} \
			${PREFIX}/lib/${OS_MULTIDIR} \
			${PREFIX}/${CTARGET}/lib/${OS_MULTIDIR} \
			${PREFIX}/lib/${MULTIDIR}
		do
			FROMDIR=${D}${FROMDIR}
			if [[ ${FROMDIR} != "${TODIR}" && -d ${FROMDIR} ]] ; then
				local files=$(find "${FROMDIR}" -maxdepth 1 ! -type d 2>/dev/null)
				if [[ -n ${files} ]] ; then
					mv ${files} "${TODIR}"
				fi
				rmdir "${FROMDIR}" 2>/dev/null
			fi
		done
	done

	# make sure the libtool archives have libdir set to where they actually
	# -are-, and not where they -used- to be.
	fix_libtool_libdir_paths "$(find ${D}${LIBPATH} -name *.la)"
}

#----<< src_* >>----

#---->> unorganized crap in need of refactoring follows

# gcc_quick_unpack will unpack the gcc tarball and patches in a way that is
# consistant with the behavior of get_gcc_src_uri. The only patch it applies
# itself is the branch update if present.
#
# Travis Tilley <lv@gentoo.org> (03 Sep 2004)
#
gcc_quick_unpack() {
	pushd "${WORKDIR}" > /dev/null
	export PATCH_GCC_VER=${PATCH_GCC_VER:-${GCC_RELEASE_VER}}
	export UCLIBC_GCC_VER=${UCLIBC_GCC_VER:-${PATCH_GCC_VER}}
	export PIE_GCC_VER=${PIE_GCC_VER:-${GCC_RELEASE_VER}}
	export PP_GCC_VER=${PP_GCC_VER:-${GCC_RELEASE_VER}}
	export HTB_GCC_VER=${HTB_GCC_VER:-${GCC_RELEASE_VER}}

	if [[ -n ${GCC_A_FAKEIT} ]] ; then
		unpack ${GCC_A_FAKEIT}
	elif [[ -n ${PRERELEASE} ]] ; then
		unpack gcc-${PRERELEASE}.tar.bz2
	elif [[ -n ${SNAPSHOT} ]] ; then
		unpack gcc-${SNAPSHOT}.tar.bz2
	else
		unpack gcc-${GCC_RELEASE_VER}.tar.bz2
		# We want branch updates to be against a release tarball
		if [[ -n ${BRANCH_UPDATE} ]] ; then
			pushd ${S:-"$(gcc_get_s_dir)"} > /dev/null
			epatch ${DISTDIR}/gcc-${GCC_RELEASE_VER}-branch-update-${BRANCH_UPDATE}.patch.bz2
			popd > /dev/null
		fi
	fi

	[[ -n ${PATCH_VER} ]] && \
		unpack gcc-${PATCH_GCC_VER}-patches-${PATCH_VER}.tar.bz2

	[[ -n ${UCLIBC_VER} ]] && \
		unpack gcc-${UCLIBC_GCC_VER}-uclibc-patches-${UCLIBC_VER}.tar.bz2

	if want_ssp ; then
		if [[ -n ${PP_FVER} ]] ; then
			# The gcc 3.4 propolice versions are meant to be unpacked to ${S}
			pushd ${S:-$(gcc_get_s_dir)} > /dev/null
			unpack protector-${PP_FVER}.tar.gz
			popd > /dev/null
		else
			unpack gcc-${PP_GCC_VER}-ssp-${PP_VER}.tar.bz2
		fi
	fi

	if want_pie ; then
		if [[ -n ${PIE_CORE} ]] ; then
			unpack ${PIE_CORE}
		else
			unpack gcc-${PIE_GCC_VER}-piepatches-v${PIE_VER}.tar.bz2
		fi
	fi

	# pappy@gentoo.org - Fri Oct  1 23:24:39 CEST 2004
	want_boundschecking && \
		unpack "bounds-checking-gcc-${HTB_GCC_VER}-${HTB_VER}.patch.bz2"

	popd > /dev/null
}

# Exclude any unwanted patches, as specified by the following variables:
#
#	GENTOO_PATCH_EXCLUDE
#			List of filenames, relative to ${WORKDIR}/patch/
#
#	PIEPATCH_EXCLUDE
#			List of filenames, relative to ${WORKDIR}/piepatch/
#
# Travis Tilley <lv@gentoo.org> (03 Sep 2004)
#
exclude_gcc_patches() {
	local i
	for i in ${GENTOO_PATCH_EXCLUDE} ; do
		if [[ -f ${WORKDIR}/patch/${i} ]] ; then
			einfo "Excluding patch ${i}"
			rm -f "${WORKDIR}"/patch/${i} || die "failed to delete ${i}"
		fi
	done
	for i in ${PIEPATCH_EXCLUDE} ; do
		if [[ -f ${WORKDIR}/piepatch/${i} ]] ; then
			einfo "Excluding piepatch ${i}"
			rm -f "${WORKDIR}"/piepatch/${i} || die "failed to delete ${i}"
		fi
	done
}

# Try to apply some stub patches so that gcc won't error out when
# passed parameters like -fstack-protector but no ssp is found
do_gcc_stub() {
	local v stub_patch=""
	for v in ${GCC_RELEASE_VER} ${GCC_BRANCH_VER} ; do
		stub_patch=${GCC_FILESDIR}/stubs/gcc-${v}-$1-stub.patch
		if [[ -e ${stub_patch} ]] ; then
			EPATCH_SINGLE_MSG="Applying stub patch for $1 ..." \
			epatch "${stub_patch}"
			return 0
		fi
	done
}

do_gcc_HTB_patches() {
	if ! want_boundschecking || \
	   (want_ssp && [[ ${HTB_EXCLUSIVE} == "true" ]])
	then
		do_gcc_stub htb
		return 0
	fi

	# modify the bounds checking patch with a regression patch
	epatch "${WORKDIR}/bounds-checking-gcc-${HTB_GCC_VER}-${HTB_VER}.patch"
	release_version="${release_version}, HTB-${HTB_GCC_VER}-${HTB_VER}"
}

# patch in ProPolice Stack Smashing protection
do_gcc_SSP_patches() {
	# PARISC has no love ... it's our stack :(
	if [[ $(tc-arch) == "hppa" ]] || \
	   ! want_ssp || \
	   (want_boundschecking && [[ ${HTB_EXCLUSIVE} == "true" ]])
	then
		do_gcc_stub ssp
		return 0
	fi

	local ssppatch
	local sspdocs

	if [[ -n ${PP_FVER} ]] ; then
		# Etoh keeps changing where files are and what the patch is named
		if tc_version_is_at_least 3.4.1 ; then
			# >3.4.1 uses version in patch name, and also includes docs
			ssppatch="${S}/gcc_${PP_VER}.dif"
			sspdocs="yes"
		elif tc_version_is_at_least 3.4.0 ; then
			# >3.4 put files where they belong and 3_4 uses old patch name
			ssppatch="${S}/protector.dif"
			sspdocs="no"
		elif tc_version_is_at_least 3.2.3 ; then
			# earlier versions have no directory structure or docs
			mv ${S}/protector.{c,h} ${S}/gcc
			ssppatch="${S}/protector.dif"
			sspdocs="no"
		fi
	else
		# Just start packaging the damn thing ourselves
		mv "${WORKDIR}"/ssp/protector.{c,h} "${S}"/gcc/
		ssppatch=${WORKDIR}/ssp/gcc-${PP_GCC_VER}-ssp.patch
		# allow boundschecking and ssp to get along
		(want_boundschecking && [[ -e ${WORKDIR}/ssp/htb-ssp.patch ]]) \
			&& patch -s "${ssppatch}" "${WORKDIR}"/ssp/htb-ssp.patch
	fi

	[[ -z ${ssppatch} ]] && die "Sorry, SSP is not supported in this version"
	epatch ${ssppatch}

	if [[ ${PN} == "gcc" && ${sspdocs} == "no" ]] ; then
		epatch "${GCC_FILESDIR}"/pro-police-docs.patch
	fi

	# Don't build crtbegin/end with ssp
	sed -e 's|^CRTSTUFF_CFLAGS = |CRTSTUFF_CFLAGS = -fno-stack-protector |'\
		-i gcc/Makefile.in || die "Failed to update crtstuff!"

	# if gcc in a stage3 defaults to ssp, is version 3.4.0 and a stage1 is built
	# the build fails building timevar.o w/:
	# cc1: stack smashing attack in function ix86_split_to_parts()
	if use build && tc_version_is_at_least 3.4.0 ; then
		if gcc -dumpspecs | grep -q "fno-stack-protector:" ; then
			epatch "${GCC_FILESDIR}"/3.4.0/gcc-3.4.0-cc1-no-stack-protector.patch
		fi
	fi

	release_version="${release_version}, ssp-${PP_FVER:-${PP_GCC_VER}-${PP_VER}}"
	if want_libssp ; then
		update_gcc_for_libssp
	else
		update_gcc_for_libc_ssp
	fi

	# Don't build libgcc with ssp
	sed -e 's|^\(LIBGCC2_CFLAGS.*\)$|\1 -fno-stack-protector|' \
		-i gcc/Makefile.in || die "Failed to update gcc!"
}

# If glibc or uclibc has been patched to provide the necessary symbols itself,
# then lets use those for SSP instead of libgcc.
update_gcc_for_libc_ssp() {
	if libc_has_ssp ; then
		einfo "Updating gcc to use SSP from libc ..."
		sed -e 's|^\(LIBGCC2_CFLAGS.*\)$|\1 -D_LIBC_PROVIDES_SSP_|' \
			-i ${S}/gcc/Makefile.in || die "Failed to update gcc!"
	fi
}

# a split out non-libc non-libgcc ssp requires additional spec logic changes
update_gcc_for_libssp() {
	einfo "Updating gcc to use SSP from libssp..."
	sed -e 's|^\(INTERNAL_CFLAGS.*\)$|\1 -D_LIBSSP_PROVIDES_SSP_|' \
		-i ${S}/gcc/Makefile.in || die "Failed to update gcc!"
}

# do various updates to PIE logic
do_gcc_PIE_patches() {
	if ! want_pie || \
	   (want_boundschecking && [[ ${HTB_EXCLUSIVE} == "true" ]])
	then
		return 0
	fi

	want_boundschecking \
		&& rm -f "${WORKDIR}"/piepatch/*/*-boundschecking-no.patch* \
		|| rm -f "${WORKDIR}"/piepatch/*/*-boundschecking-yes.patch*

	use vanilla && rm -f "${WORKDIR}"/piepatch/*/*uclibc*

	guess_patch_type_in_dir "${WORKDIR}"/piepatch/upstream

	# corrects startfile/endfile selection and shared/static/pie flag usage
	EPATCH_MULTI_MSG="Applying upstream pie patches ..." \
	epatch "${WORKDIR}"/piepatch/upstream
	# adds non-default pie support (rs6000)
	EPATCH_MULTI_MSG="Applying non-default pie patches ..." \
	epatch "${WORKDIR}"/piepatch/nondef
	# adds default pie support (rs6000 too) if DEFAULT_PIE[_SSP] is defined
	EPATCH_MULTI_MSG="Applying default pie patches ..." \
	epatch "${WORKDIR}"/piepatch/def

	# we want to be able to control the pie patch logic via something other
	# than ALL_CFLAGS...
	sed -e '/^ALL_CFLAGS/iHARD_CFLAGS = ' \
		-e 's|^ALL_CFLAGS = |ALL_CFLAGS = $(HARD_CFLAGS) |' \
		-i ${S}/gcc/Makefile.in

	release_version="${release_version}, pie-${PIE_VER}"
}

should_we_gcc_config() {
	# we only want to switch compilers if installing to / or /tmp/stage1root
	[[ ${ROOT} == "/" || ${ROOT} == "/tmp/stage1root" ]] || return 1

	# we always want to run gcc-config if we're bootstrapping, otherwise
	# we might get stuck with the c-only stage1 compiler
	use bootstrap && return 0
	use build && return 0

	# if the current config is invalid, we definitely want a new one
	# Note: due to bash quirkiness, the following must not be 1 line
	local curr_config
	curr_config=$(env -i gcc-config -c ${CTARGET} 2>&1) || return 0

	# if the previously selected config has the same major.minor (branch) as
	# the version we are installing, then it will probably be uninstalled
	# for being in the same SLOT, make sure we run gcc-config.
	local curr_config_ver=$(env -i gcc-config -S ${curr_config} | awk '{print $2}')

	local curr_branch_ver=$(get_version_component_range 1-2 ${curr_config_ver})

	# If we're using multislot, just run gcc-config if we're installing
	# to the same profile as the current one.
	use multislot && return $([[ ${curr_config_ver} == ${GCC_CONFIG_VER} ]])

	if [[ ${curr_branch_ver} == ${GCC_BRANCH_VER} ]] ; then
		return 0
	else
		# if we're installing a genuinely different compiler version,
		# we should probably tell the user -how- to switch to the new
		# gcc version, since we're not going to do it for him/her.
		# We don't want to switch from say gcc-3.3 to gcc-3.4 right in
		# the middle of an emerge operation (like an 'emerge -e world'
		# which could install multiple gcc versions).
		einfo "The current gcc config appears valid, so it will not be"
		einfo "automatically switched for you.  If you would like to"
		einfo "switch to the newly installed gcc version, do the"
		einfo "following:"
		echo
		einfo "gcc-config ${CTARGET}-${GCC_CONFIG_VER}"
		einfo "source /etc/profile"
		echo
		ebeep
		return 1
	fi
}

do_gcc_config() {
	if ! should_we_gcc_config ; then
		env -i gcc-config --use-old --force
		return 0
	fi

	local current_gcc_config="" current_specs="" use_specs=""

	# We grep out any possible errors
	current_gcc_config=$(env -i gcc-config -c ${CTARGET} | grep -v '^ ')
	if [[ -n ${current_gcc_config} ]] ; then
		# figure out which specs-specific config is active
		current_specs=$(gcc-config -S ${current_gcc_config} | awk '{print $3}')
		[[ -n ${current_specs} ]] && use_specs=-${current_specs}
	fi
	if [[ -n ${use_specs} ]] && \
	   [[ ! -e ${ROOT}/etc/env.d/gcc/${CTARGET}-${GCC_CONFIG_VER}${use_specs} ]]
	then
		ewarn "The currently selected specs-specific gcc config,"
		ewarn "${current_specs}, doesn't exist anymore. This is usually"
		ewarn "due to enabling/disabling hardened or switching to a version"
		ewarn "of gcc that doesnt create multiple specs files. The default"
		ewarn "config will be used, and the previous preference forgotten."
		ebeep
		epause
		use_specs=""
	fi

	gcc-config ${CTARGET}-${GCC_CONFIG_VER}${use_specs}
}

should_we_eselect_compiler() {
	# we only want to switch compilers if installing to / or /tmp/stage1root
	[[ ${ROOT} == "/" || ${ROOT} == "/tmp/stage1root" ]] || return 1

	# we always want to run gcc-config if we're bootstrapping, otherwise
	# we might get stuck with the c-only stage1 compiler
	use bootstrap && return 0
	use build && return 0

	# if the current config is invalid, we definitely want a new one
	# Note: due to bash quirkiness, the following must not be 1 line
	local curr_config
	curr_config=$(env -i eselect compiler show ${CTARGET} 2>&1) || return 0
	[[ -z ${curr_config} || ${curr_config} == "(none)" ]] && return 0

	# if the previously selected config has the same major.minor (branch) as
	# the version we are installing, then it will probably be uninstalled
	# for being in the same SLOT, make sure we run gcc-config.
	local curr_config_ver=$(echo ${curr_config} | cut -f1 -d/ | awk -F - '{ print $5 }')
	local curr_branch_ver=$(get_version_component_range 1-2 ${curr_config_ver})

	# If we're using multislot, just run gcc-config if we're installing
	# to the same profile as the current one.
	use multislot && return $([[ ${curr_config_ver} == ${GCC_CONFIG_VER} ]])

	if [[ ${curr_branch_ver} == ${GCC_BRANCH_VER} ]] ; then
		return 0
	else
		# if we're installing a genuinely different compiler version,
		# we should probably tell the user -how- to switch to the new
		# gcc version, since we're not going to do it for him/her.
		# We don't want to switch from say gcc-3.3 to gcc-3.4 right in
		# the middle of an emerge operation (like an 'emerge -e world'
		# which could install multiple gcc versions).
		einfo "The current gcc config appears valid, so it will not be"
		einfo "automatically switched for you.  If you would like to"
		einfo "switch to the newly installed gcc version, do the"
		einfo "following:"
		echo
		einfo "eselect compiler set <profile>"
		echo
		ebeep
		return 1
	fi
}

do_eselect_compiler() {
	if ! should_we_eselect_compiler; then
		eselect compiler update
		return 0
	fi

	local current_specs=$(env -i eselect compiler show ${CTARGET} | cut -f2 -d/)

	if [[ -n ${current_specs} && ${current_specs} != "(none)" ]] && eselect compiler set ${CTARGET}-${GCC_CONFIG_VER}/${current_specs} &> /dev/null; then
		einfo "The following compiler profile has been activated based on your previous profile:"
		einfo "${CTARGET}-${GCC_CONFIG_VER}/${current_specs}"
	else
		# We couldn't choose based on the old specs, so fall back on vanilla/hardened based on USE

		local spec
		if use hardened ; then
			spec="hardened"
		else
			spec="vanilla"
		fi

		local profile
		local isset=0
		for profile in "${current_specs%-*}-${spec}" "${DEFAULT_ABI}-${spec}" "${spec}" ; do
			if eselect compiler set ${CTARGET}-${GCC_CONFIG_VER}/${profile} &> /dev/null ; then
				ewarn "We were not able to select the currently in use profile with"
				ewarn "your newly emerged gcc.  Instead, we have enabled the following:"
				ewarn "${CTARGET}-${GCC_CONFIG_VER}/${profile}"
				ewarn "If this is incorrect, please use 'eselect compiler set' to"
				ewarn "select another profile."

				isset=1
				break
			fi
		done

		if [[ ${isset} == 0 ]] ; then
			eerror "We were not able to automatically set the current compiler"
			eerror "to your newly emerged gcc.  Please use 'eselect compiler set'"
			eerror "to select your compiler."
		fi
	fi
}

# This function allows us to gentoo-ize gcc's version number and bugzilla
# URL without needing to use patches.
#
# Travis Tilley <lv@gentoo.org> (02 Sep 2004)
#
gcc_version_patch() {
	[[ -z $1 ]] && die "no arguments to gcc_version_patch"

	if grep -qs VERSUFFIX "${S}"/gcc/version.c ; then
		sed -i -e "s~VERSUFFIX \"\"~VERSUFFIX \" ($2)\"~" "${S}"/gcc/version.c \
		|| die "failed to update VERSUFFIX with Gentoo branding"
	else
		version_string="$1 ($2)"
		sed -i -e "s~\(const char version_string\[\] = \"\).*\(\".*\)~\1$version_string\2~" \
		        "${S}"/gcc/version.c || die "failed to update version.c with Gentoo branding."
	fi
	sed -i -e 's~gcc\.gnu\.org\/bugs\.html~bugs\.gentoo\.org\/~'\
	"${S}"/gcc/version.c || die "Failed to change the bug URL"
}

# The purpose of this DISGUSTING gcc multilib hack is to allow 64bit libs
# to live in lib instead of lib64 where they belong, with 32bit libraries
# in lib32. This hack has been around since the beginning of the amd64 port,
# and we're only now starting to fix everything that's broken. Eventually
# this should go away.
#
# Travis Tilley <lv@gentoo.org> (03 Sep 2004)
#
disgusting_gcc_multilib_HACK() {
	local config
	local libdirs
	if has_multilib_profile ; then
		case $(tc-arch) in
			amd64)
				config="i386/t-linux64"
				libdirs="../$(get_abi_LIBDIR amd64) ../$(get_abi_LIBDIR x86)" \
			;;
			ppc64)
				config="rs6000/t-linux64"
				libdirs="../$(get_abi_LIBDIR ppc64) ../$(get_abi_LIBDIR ppc)" \
			;;
		esac
	else
		# Remove this hunk when amd64's 2004.3 is purged from portage.
		use amd64 || die "Your profile is no longer supported by portage."
		config="i386/t-linux64"
		libdirs="../$(get_libdir) ../$(get_multilibdir)"
	fi

	einfo "updating multilib directories to be: ${libdirs}"
	sed -i -e "s:^MULTILIB_OSDIRNAMES.*:MULTILIB_OSDIRNAMES = ${libdirs}:" ${S}/gcc/config/${config}
}

disable_multilib_libjava() {
	if is_gcj ; then
		# We dont want a multilib libjava, so lets use this hack taken from fedora
		pushd ${S} > /dev/null
		sed -i -e 's/^all: all-redirect/ifeq (\$(MULTISUBDIR),)\nall: all-redirect\nelse\nall:\n\techo Multilib libjava build disabled\nendif/' libjava/Makefile.in
		sed -i -e 's/^install: install-redirect/ifeq (\$(MULTISUBDIR),)\ninstall: install-redirect\nelse\ninstall:\n\techo Multilib libjava install disabled\nendif/' libjava/Makefile.in
		sed -i -e 's/^check: check-redirect/ifeq (\$(MULTISUBDIR),)\ncheck: check-redirect\nelse\ncheck:\n\techo Multilib libjava check disabled\nendif/' libjava/Makefile.in
		sed -i -e 's/^all: all-recursive/ifeq (\$(MULTISUBDIR),)\nall: all-recursive\nelse\nall:\n\techo Multilib libjava build disabled\nendif/' libjava/Makefile.in
		sed -i -e 's/^install: install-recursive/ifeq (\$(MULTISUBDIR),)\ninstall: install-recursive\nelse\ninstall:\n\techo Multilib libjava install disabled\nendif/' libjava/Makefile.in
		sed -i -e 's/^check: check-recursive/ifeq (\$(MULTISUBDIR),)\ncheck: check-recursive\nelse\ncheck:\n\techo Multilib libjava check disabled\nendif/' libjava/Makefile.in
		popd > /dev/null
	fi
}

fix_libtool_libdir_paths() {
	local dirpath
	for archive in $* ; do
		dirpath=$(dirname ${archive} | sed -e "s:^${D}::")
		sed -i ${archive} -e "s:^libdir.*:libdir=\'${dirpath}\':"
	done
}

is_multilib() {
	[[ ${GCCMAJOR} < 3 ]] && return 1
	case ${CTARGET} in
		mips64*|powerpc64*|s390x*|sparc64*|x86_64*)
			has_multilib_profile || use multilib ;;
		*)	false ;;
	esac
}

is_uclibc() {
	[[ ${GCCMAJOR} -lt 3 ]] && return 1
	[[ ${CTARGET} == *-uclibc ]]
}

is_allowed() {
	return 0
#	[[ -z ${TOOLCHAIN_ALLOWED_LANGS} ]] && return 0
#	[[ " ${TOOLCHAIN_ALLOWED_LANGS} " != " "*$1*" " ]]
}

is_cxx() {
	gcc-lang-supported 'c++' || return 1
	is_allowed 'c++' || return 1
	use build && return 1
	! use nocxx
}

is_f77() {
	gcc-lang-supported f77 || return 1
	is_allowed 'f77' || return 1
	use build && return 1
	use fortran
}

is_f95() {
	gcc-lang-supported f95 || return 1
	is_allowed 'f95' || return 1
	use build && return 1
	use fortran
}

is_fortran() {
	gcc-lang-supported fortran || return 1
	is_allowed 'fortran' || return 1
	use build && return 1
	use fortran
}

is_gcj() {
	gcc-lang-supported java || return 1
	is_allowed 'gcj' || return 1
	use build && return 1
	use gcj
}

is_objc() {
	gcc-lang-supported objc || return 1
	is_allowed 'objc' || return 1
	use build && return 1
	use objc
}

is_objcxx() {
	gcc-lang-supported 'obj-c++' || return 1
	is_allowed 'obj-c++' || return 1
	use build && return 1
	use objc++
}

is_ada() {
	gcc-lang-supported ada || return 1
	is_allowed 'ada' || return 1
	use build && return 1
	use ada
}