# Copyright 1999-2004 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
# $Header: /var/cvsroot/gentoo-x86/eclass/linux-mod.eclass,v 1.52 2005/09/22 14:13:36 johnm Exp $

# Description: This eclass is used to interface with linux-info in such a way
#              to provide the functionality required and initial functions
#			   required to install external modules against a kernel source
#			   tree.
#
# Maintainer: John Mylchreest <johnm@gentoo.org>
# Copyright 2004 Gentoo Linux
#
# Please direct your bugs to the current eclass maintainer :)

# A Couple of env vars are available to effect usage of this eclass
# These are as follows:
#
# Env Var		Option		Default		Description
# KERNEL_DIR		<string>	/usr/src/linux	The directory containing kernel
#							the target kernel sources.
# ECONF_PARAMS		<string>			The parameters to pass to econf.
#							If this is not set, then econf
#							isn't run.
# BUILD_PARAMS		<string>			The parameters to pass to emake.
# BUILD_TARGETS		<string>	clean modules	The build targets to pass to
#							make.
# MODULE_NAMES		<string>			This is the modules which are
#							to be built automatically using
#							the default pkg_compile/install.
#							They are explained properly
#							below. It will only make
#							BUILD_TARGETS once in any
#							directory.

# MODULE_NAMES - Detailed Overview
#
# The structure of each MODULE_NAMES entry is as follows:
# modulename(libdir:srcdir:objdir)
# for example:
# MODULE_NAMES="module_pci(pci:${S}/pci:${S}) module_usb(usb:${S}/usb:${S})"
#
# what this would do is
#  cd ${S}/pci
#  make ${BUILD_PARAMS} ${BUILD_TARGETS}
#  cd ${S}
#  insinto /lib/modules/${KV_FULL}/pci
#  doins module_pci.${KV_OBJ}
#
#  cd ${S}/usb
#  make ${BUILD_PARAMS} ${BUILD_TARGETS}
#  cd ${S}
#  insinto /lib/modules/${KV_FULL}/usb
#  doins module_usb.${KV_OBJ}
#
# if the srcdir isnt specified, it assumes ${S}
# if the libdir isnt specified, it assumes misc.
# if the objdir isnt specified, it assumes srcdir

# There is also support for automatyed modules.d file generation.
# This can be explicitly enabled by setting any of the following variables.
#
#
# MODULESD_${modulename}_ENABLED		This enables the modules.d file
#						generation even if we dont
#						specify any additional info.
# MODULESD_${modulename}_EXAMPLES		This is a bash array containing
#						a list of examples which should
#						be used. If you want us to try and
#						take a guess. Set this to "guess"
# MODULESD_${modulename}_ALIASES		This is a bash array containing
#						a list of associated aliases.
# MODULESD_${modulename}_ADDITIONS		This is a bash array containing
#						A list of additional things to
#						add to the bottom of the file.
#						This can be absolutely anything.
#						Each entry is a new line.
# MODULES_${modulename}_DOCS			This is a string list which contains
#						the full path to any associated
#						documents for $modulename


inherit linux-info
EXPORT_FUNCTIONS pkg_setup pkg_postinst src_install src_compile pkg_postrm

IUSE="" # don't put pcmcia here, rather in the ebuilds that actually support pcmcia
SLOT="0"
DESCRIPTION="Based on the $ECLASS eclass"
RDEPEND="virtual/modutils
		pcmcia? ( virtual/pcmcia )"
DEPEND="virtual/linux-sources
		sys-apps/sed
		pcmcia? ( virtual/pcmcia )"

# eclass utilities
# ----------------------------------

unpack_pcmcia_sources() {
	# So while the two eclasses exist side-by-side and also the ebuilds inherit
	# both we need to check for PCMCIA_SOURCE_DIR, and if we find it, then we
	# bail out and assume pcmcia.eclass is working on it.
	[[ -n ${PCMCIA_SOURCE_DIR} ]] && return 1

	if [[ -f "${1}" ]]; then
		PCMCIA_SOURCE_DIR="${WORKDIR}/pcmcia-cs/"

		ebegin "Decompressing pcmcia-cs sources"
		mkdir -p ${PCMCIA_SOURCE_DIR}
		tar -xjf ${1} -C ${PCMCIA_SOURCE_DIR}
		eend $?

		if [[ -f ${PCMCIA_SOURCE_DIR}/pcmcia-cs-version ]]; then
			PCMCIA_VERSION=$(cat ${PCMCIA_SOURCE_DIR}/pcmcia-cs-version)
			einfo "Found pcmcia-cs-${PCMCIA_VERSION}"
		fi
	fi
}

# Dummy function for compatibility.
pcmcia_configure() { return 0; }

pcmcia_src_unpack() {
	local pcmcia_tbz="${ROOT}/usr/src/pcmcia-cs/pcmcia-cs-build-env.tbz2"

	# if the kernel has pcmcia support built in, then we just ignore all this.
	if linux_chkconfig_present PCMCIA; then
		einfo "Kernel based PCMCIA support has been detected."
	else
		if kernel_is 2 4; then
			unpack_pcmcia_sources ${pcmcia_tbz};
		else
			einfo "We have detected that you are running a 2.6 kernel"
			einfo "but you are not using the built-in PCMCIA support."
			einfo "We will assume you know what you are doing, but please"
			einfo "consider using the built in PCMCIA support instead."
			sleep 10

			unpack_pcmcia_sources ${pcmcia_tbz};
		fi
	fi
}

use_m() {
	# if we haven't determined the version yet, we need too.
	get_version;

	# if the kernel version is greater than 2.6.6 then we should use
	# M= instead of SUBDIRS=
	[ ${KV_MAJOR} -eq 2 -a ${KV_MINOR} -gt 5 -a ${KV_PATCH} -gt 5 ] && \
		return 0 || return 1
}

convert_to_m() {
	if use_m
	then
		[ ! -f "${1}" ] && \
			die "convert_to_m() requires a filename as an argument"
		ebegin "Converting ${1/${WORKDIR}\//} to use M= instead of SUBDIRS="
		sed -i 's:SUBDIRS=:M=:g' ${1}
		eend $?
	fi
}

update_depmod() {
	# if we haven't determined the version yet, we need too.
	get_version;

	ebegin "Updating module dependencies for ${KV_FULL}"
	if [ -r ${KV_OUT_DIR}/System.map ]
	then
		depmod -ae -F ${KV_OUT_DIR}/System.map -b ${ROOT} -r ${KV_FULL}
		eend $?
	else
		ewarn
		ewarn "${KV_OUT_DIR}/System.map not found."
		ewarn "You must manually update the kernel module dependencies using depmod."
		eend 1
		ewarn
	fi
}

update_modules() {
	if [ -x /sbin/modules-update ] && \
		grep -v -e "^#" -e "^$" ${D}/etc/modules.d/* >/dev/null 2>&1; then
		ebegin "Updating modules.conf"
		/sbin/modules-update
		eend $?
	fi
}

move_old_moduledb() {
	local OLDDIR=${ROOT}/usr/share/module-rebuild/
	local NEWDIR=${ROOT}/var/lib/module-rebuild/

	if [[ -f ${OLDDIR}/moduledb ]]; then
		[[ ! -d ${NEWDIR} ]] && mkdir -p ${NEWDIR}
		[[ ! -f ${NEWDIR}/moduledb ]] && \
			mv ${OLDDIR}/moduledb ${NEWDIR}/moduledb
		rm -f ${OLDDIR}/*
		rmdir ${OLDDIR}
	fi
}

update_moduledb() {
	local MODULEDB_DIR=${ROOT}/var/lib/module-rebuild/
	move_old_moduledb

	if [[ ! -f ${MODULEDB_DIR}/moduledb ]]; then
		[[ ! -d ${MODULEDB_DIR} ]] && mkdir -p ${MODULEDB_DIR}
		touch ${MODULEDB_DIR}/moduledb
	fi
	if [[ -z $(grep ${CATEGORY}/${PN}-${PVR} ${MODULEDB_DIR}/moduledb) ]]; then
		einfo "Adding module to moduledb."
		echo "a:1:${CATEGORY}/${PN}-${PVR}" >> ${MODULEDB_DIR}/moduledb
	fi
}

remove_moduledb() {
	local MODULEDB_DIR=${ROOT}/var/lib/module-rebuild/
	move_old_moduledb

	if [[ -n $(grep ${CATEGORY}/${PN}-${PVR} ${MODULEDB_DIR}/moduledb) ]]; then
		einfo "Removing ${CATEGORY}/${PN}-${PVR} from moduledb."
		sed -ie "/.*${CATEGORY}\/${P}.*/d" ${MODULEDB_DIR}/moduledb
	fi
}

set_kvobj() {
	if kernel_is 2 6
	then
		KV_OBJ="ko"
	else
		KV_OBJ="o"
	fi
	# Do we really need to know this?
	# Lets silence it.
	# einfo "Using KV_OBJ=${KV_OBJ}"
}

generate_modulesd() {
	# This function will generate the neccessary modules.d file from the
	# information contained in the modules exported parms

	local 	currm_path currm t myIFS myVAR
	local 	module_docs module_enabled module_aliases \
			module_additions module_examples module_modinfo module_opts

	for currm_path in ${@}
	do
		currm=${currm_path//*\/}
		currm=$(echo ${currm} | tr '[:lower:]' '[:upper:]')

		module_docs="$(eval echo \${MODULESD_${currm}_DOCS})"
		module_enabled="$(eval echo \${MODULESD_${currm}_ENABLED})"
		module_aliases="$(eval echo \${#MODULESD_${currm/-/_}_ALIASES[*]})"
		module_additions="$(eval echo \${#MODULESD_${currm/-/_}_ADDITIONS[*]})"
		module_examples="$(eval echo \${#MODULESD_${currm/-/_}_EXAMPLES[*]})"

		[[ ${module_aliases} -eq 0 ]] 	&& unset module_aliases
		[[ ${module_additions} -eq 0 ]]	&& unset module_additions
		[[ ${module_examples} -eq 0 ]] 	&& unset module_examples

		# If we specify we dont want it, then lets exit, otherwise we assume
		# that if its set, we do want it.
		[[ ${module_enabled} == no ]] && return 0

		# unset any unwanted variables.
		for t in ${!module_*}
		do
			[[ -z ${!t} ]] && unset ${t}
		done

		[[ -z ${!module_*} ]] && return 0

		# OK so now if we have got this far, then we know we want to continue
		# and generate the modules.d file.
		module_modinfo="$(modinfo -p ${currm_path}.${KV_OBJ})"
		module_config="${T}/modulesd-${currm}"

		ebegin "Preparing file for modules.d"
		#-----------------------------------------------------------------------
		echo "# modules.d configuration file for ${currm}" >> ${module_config}
		#-----------------------------------------------------------------------
		[[ -n ${module_docs} ]] && \
			echo "# For more information please read:" >> ${module_config}
		for t in ${module_docs}
		do
			echo "#    ${t//*\/}" >> ${module_config}
		done
		echo >> ${module_config}

		#-----------------------------------------------------------------------
		if [[ ${module_aliases} -gt 0 ]]
		then
			echo  "# Internal Aliases - Do not edit" >> ${module_config}
			echo  "# ------------------------------" >> ${module_config}

			for((t=0; t<${module_aliases}; t++))
			do
				echo "alias $(eval echo \${MODULESD_${currm}_ALIASES[$t]})" \
					>> ${module_config}
			done
			echo '' >> ${module_config}
		fi

		#-----------------------------------------------------------------------
		if [[ -n ${module_modinfo} ]]
		then
			echo >> ${module_config}
			echo  "# Configurable module parameters" >> ${module_config}
			echo  "# ------------------------------" >> ${module_config}
			myIFS="${IFS}"
			IFS="$(echo -en "\n\b")"

			for t in ${module_modinfo}
			do
				myVAR="$(echo ${t#*:} | grep -e " [0-9][ =]" | sed "s:.*\([01][= ]\).*:\1:")"
				if [[ -n ${myVAR} ]]
				then
					module_opts="${module_opts} ${t%%:*}:${myVAR}"
				fi
				echo -e "# ${t%%:*}:\t${t#*:}" >> ${module_config}
			done
			IFS="${myIFS}"
			echo '' >> ${module_config}
		fi

		#-----------------------------------------------------------------------
		if [[ $(eval echo \${MODULESD_${currm}_ALIASES[0]}) == guess ]]
		then
			# So lets do some guesswork eh?
			if [[ -n ${module_opts} ]]
			then
				echo "# For Example..." >> ${module_config}
				echo "# --------------" >> ${module_config}
				for t in ${module_opts}
				do
					echo "# options ${currm} ${t//:*}=${t//*:}" >> ${module_config}
				done
				echo '' >> ${module_config}
			fi
		elif [[ ${module_examples} -gt 0 ]]
		then
			echo "# For Example..." >> ${module_config}
			echo "# --------------" >> ${module_config}
			for((t=0; t<${module_examples}; t++))
			do
				echo "options $(eval echo \${MODULESD_${currm}_EXAMPLES[$t]})" \
					>> ${module_config}
			done
			echo '' >> ${module_config}
		fi

		#-----------------------------------------------------------------------
		if [[ ${module_additions} -gt 0 ]]
		then
			for((t=0; t<${module_additions}; t++))
			do
				echo "$(eval echo \${MODULESD_${currm}_ADDITIONS[$t]})" \
					>> ${module_config}
			done
			echo '' >> ${module_config}
		fi

		#-----------------------------------------------------------------------

		# then we install it
		insinto /etc/modules.d
		newins ${module_config} ${currm_path//*\/}

		# and install any documentation we might have.
		[[ -n ${module_docs} ]] && dodoc ${module_docs}
	done
	eend 0
	return 0
}

find_module_params() {
	local matched_offset=0 matched_opts=0 test="${@}" temp_var result
	local i=0 y=0 z=0

	for((i=0; i<=${#test}; i++))
	do
		case ${test:${i}:1} in
			\()		matched_offset[0]=${i};;
			\:)		matched_opts=$((${matched_opts} + 1));
					matched_offset[${matched_opts}]="${i}";;
			\))		matched_opts=$((${matched_opts} + 1));
					matched_offset[${matched_opts}]="${i}";;
		esac
	done

	for((i=0; i<=${matched_opts}; i++))
	do
		# i			= offset were working on
		# y			= last offset
		# z			= current offset - last offset
		# temp_var	= temporary name
		case ${i} in
			0)	tempvar=${test:0:${matched_offset[0]}};;
			*)	y=$((${matched_offset[$((${i} - 1))]} + 1))
				z=$((${matched_offset[${i}]} - ${matched_offset[$((${i} - 1))]}));
				z=$((${z} - 1))
				tempvar=${test:${y}:${z}};;
		esac

		case ${i} in
			0)	result="${result} modulename:${tempvar}";;
			1)	result="${result} libdir:${tempvar}";;
			2)	result="${result} srcdir:${tempvar}";;
			3)	result="${result} objdir:${tempvar}";;
		esac
	done

	echo ${result}
}

# default ebuild functions
# --------------------------------

linux-mod_pkg_setup() {
	linux-info_pkg_setup;
	check_kernel_built;
	check_modules_supported;
	set_kvobj;
}

linux-mod_src_compile() {
	local modulename libdir srcdir objdir i n myARCH="${ARCH}"
	ARCH="$(tc-arch-kernel)"

	BUILD_TARGETS=${BUILD_TARGETS:-clean module}

	for i in ${MODULE_IGNORE}
	do
		MODULE_NAMES=${MODULE_NAMES//${i}(*}
	done

	for i in ${MODULE_NAMES}
	do
		unset libdir srcdir objdir
		for n in $(find_module_params ${i})
		do
			eval ${n/:*}=${n/*:/}
		done
		libdir=${libdir:-misc}
		srcdir=${srcdir:-${S}}
		objdir=${objdir:-${srcdir}}

		if [ ! -f "${srcdir}/.built" ];
		then
			cd ${srcdir}
			einfo "Preparing ${modulename} module"
			if [[ -n ${ECONF_PARAMS} ]]
			then
				econf ${ECONF_PARAMS} || \
				die "Unable to run econf ${ECONF_PARAMS}"
			fi

			emake ${BUILD_FIXES} ${BUILD_PARAMS} ${BUILD_TARGETS} \
				|| die "Unable to make \
				   ${BUILD_FIXES} ${BUILD_PARAMS} ${BUILD_TARGETS}."
			touch ${srcdir}/.built
			cd ${OLDPWD}
		fi
	done

	ARCH="${myARCH}"
}

linux-mod_src_install() {
	local modulename libdir srcdir objdir i n

	for i in ${MODULE_IGNORE}
	do
		MODULE_NAMES=${MODULE_NAMES//${i}(*}
	done

	for i in ${MODULE_NAMES}
	do
		unset libdir srcdir objdir
		for n in $(find_module_params ${i})
		do
			eval ${n/:*}=${n/*:/}
		done
		libdir=${libdir:-misc}
		srcdir=${srcdir:-${S}}
		objdir=${objdir:-${srcdir}}

		einfo "Installing ${modulename} module"
		cd ${objdir}
		insinto ${ROOT}lib/modules/${KV_FULL}/${libdir}
		doins ${modulename}.${KV_OBJ}
		cd ${OLDPWD}

		generate_modulesd ${objdir}/${modulename}
	done
}

linux-mod_pkg_postinst() {
	update_depmod;
	update_modules;
	update_moduledb;
}

linux-mod_pkg_postrm() {
	remove_moduledb;
}