From 6a9a2335247c00022d3906a8d587ae5e4a76b1d6 Mon Sep 17 00:00:00 2001 From: Alin Năstac Date: Mon, 30 Jun 2008 21:40:26 +0000 Subject: Version bump (#230013). Depend on + +files/rp-pppoe-3.10-autotools.patch, + +files/rp-pppoe-3.10-gentoo-netscripts.patch, + +files/rp-pppoe-3.10-linux-headers.patch, + +files/rp-pppoe-3.10-plugin-options.patch, + +files/rp-pppoe-3.10-session-offset.patch, + +files/rp-pppoe-3.10-username-charset.patch, rp-pppoe-3.8-r2.ebuild, + +rp-pppoe-3.10.ebuild: + Version bump (#230013). Depend on rp-pppoe-3.8-r2.ebuild: diff --git a/net-dialup/rp-pppoe/files/rp-pppoe-3.10-autotools.patch b/net-dialup/rp-pppoe/files/rp-pppoe-3.10-autotools.patch new file mode 100644 index 000000000000..66a6e9de9bcb --- /dev/null +++ b/net-dialup/rp-pppoe/files/rp-pppoe-3.10-autotools.patch @@ -0,0 +1,106 @@ +diff -Nru rp-pppoe-3.10.orig/gui/Makefile.in rp-pppoe-3.10/gui/Makefile.in +--- rp-pppoe-3.10.orig/gui/Makefile.in 2008-06-30 16:00:41.000000000 +0200 ++++ rp-pppoe-3.10/gui/Makefile.in 2008-06-30 22:30:56.000000000 +0200 +@@ -46,7 +46,7 @@ + -mkdir -p $(DESTDIR)$(sbindir) + -mkdir -p $(DESTDIR)$(bindir) + -mkdir -p $(DESTDIR)/etc/ppp/rp-pppoe-gui +- $(install) -m 4755 -s pppoe-wrapper $(DESTDIR)$(sbindir) ++ $(install) -m 4755 pppoe-wrapper $(DESTDIR)$(sbindir) + $(install) -m 755 tkpppoe $(DESTDIR)$(bindir) + -mkdir -p $(DESTDIR)$(mandir)/man1 + $(install) -m 644 pppoe-wrapper.1 $(DESTDIR)$(mandir)/man1 +diff -Nru rp-pppoe-3.10.orig/src/configure.in rp-pppoe-3.10/src/configure.in +--- rp-pppoe-3.10.orig/src/configure.in 2008-06-30 16:00:42.000000000 +0200 ++++ rp-pppoe-3.10/src/configure.in 2008-06-30 22:29:53.000000000 +0200 +@@ -45,7 +45,7 @@ + AC_MSG_RESULT($ac_cv_struct_sockaddr_ll) + + if test "$ac_cv_struct_sockaddr_ll" = yes ; then +-AC_DEFINE(HAVE_STRUCT_SOCKADDR_LL) ++AC_DEFINE(HAVE_STRUCT_SOCKADDR_LL, 1, [Define if you have struct sockaddr_ll]) + fi + + dnl Check for N_HDLC line discipline +@@ -56,7 +56,7 @@ + ac_cv_n_hdlc=no) + AC_MSG_RESULT($ac_cv_n_hdlc) + if test "$ac_cv_n_hdlc" = yes ; then +-AC_DEFINE(HAVE_N_HDLC) ++AC_DEFINE(HAVE_N_HDLC, 1, [Define if you have the N_HDLC line discipline in linux/termios.h]) + fi + + AC_ARG_ENABLE(plugin, [ --enable-plugin=pppd_src_path build pppd plugin], ac_cv_pluginpath=$enableval, ac_cv_pluginpath=no) +@@ -104,7 +104,7 @@ + if test "$ac_cv_header_linux_if_pppox_h" = yes ; then + if test "$ac_cv_pluginpath" != no ; then + LINUX_KERNELMODE_PLUGIN=rp-pppoe.so +- AC_DEFINE(HAVE_LINUX_KERNEL_PPPOE) ++ AC_DEFINE(HAVE_LINUX_KERNEL_PPPOE, 1, [Define if you have kernel-mode PPPoE in Linux file]) + PPPD_INCDIR=$ac_cv_pluginpath + fi + fi +@@ -114,7 +114,7 @@ + fi + + if test "$ac_cv_debugging" = "yes" ; then +- AC_DEFINE(DEBUGGING_ENABLED) ++ AC_DEFINE(DEBUGGING_ENABLED, 1, [Define to include debugging code]) + fi + + AC_SUBST(LINUX_KERNELMODE_PLUGIN) +@@ -154,15 +154,15 @@ + AC_MSG_CHECKING(for Linux 2.4.X kernel-mode PPPoE support) + AC_CACHE_VAL(ac_cv_linux_kernel_pppoe,[ + if test "`uname -s`" = "Linux" ; then +-if test $cross_compiling = "no"; then ++dnl if test $cross_compiling = "no"; then + + dnl Do a bunch of modprobes. Can't hurt; might help. +-modprobe ppp_generic > /dev/null 2>&1 +-modprobe ppp_async > /dev/null 2>&1 +-modprobe n_hdlc > /dev/null 2>&1 +-modprobe ppp_synctty > /dev/null 2>&1 +-modprobe pppoe > /dev/null 2>&1 +-fi ++dnl modprobe ppp_generic > /dev/null 2>&1 ++dnl modprobe ppp_async > /dev/null 2>&1 ++dnl modprobe n_hdlc > /dev/null 2>&1 ++dnl modprobe ppp_synctty > /dev/null 2>&1 ++dnl modprobe pppoe > /dev/null 2>&1 ++dnl fi + AC_TRY_RUN([#include + #include + #include +@@ -258,7 +258,7 @@ + + if test "$rpppoe_cv_pack_bitfields" = "rev" ; then + AC_MSG_RESULT(reversed) +- AC_DEFINE(PACK_BITFIELDS_REVERSED) ++ AC_DEFINE(PACK_BITFIELDS_REVERSED, 1, [Define if bitfields are packed in reverse order]) + else + AC_MSG_RESULT(normal) + fi +diff -Nru rp-pppoe-3.10.orig/src/plugin.c rp-pppoe-3.10/src/plugin.c +--- rp-pppoe-3.10.orig/src/plugin.c 2008-06-30 16:00:43.000000000 +0200 ++++ rp-pppoe-3.10/src/plugin.c 2008-06-30 22:27:18.000000000 +0200 +@@ -27,7 +27,6 @@ + static char const RCSID[] = + "$Id: rp-pppoe-3.10-autotools.patch,v 1.1 2008/06/30 21:40:26 mrness Exp $"; + +-#define _GNU_SOURCE 1 + #include "pppoe.h" + + #include "pppd/pppd.h" +diff -Nru rp-pppoe-3.10.orig/src/relay.c rp-pppoe-3.10/src/relay.c +--- rp-pppoe-3.10.orig/src/relay.c 2008-06-30 16:00:43.000000000 +0200 ++++ rp-pppoe-3.10/src/relay.c 2008-06-30 22:27:18.000000000 +0200 +@@ -17,8 +17,6 @@ + static char const RCSID[] = + "$Id: rp-pppoe-3.10-autotools.patch,v 1.1 2008/06/30 21:40:26 mrness Exp $"; + +-#define _GNU_SOURCE 1 /* For SA_RESTART */ +- + #include "relay.h" + + #include diff --git a/net-dialup/rp-pppoe/files/rp-pppoe-3.10-gentoo-netscripts.patch b/net-dialup/rp-pppoe/files/rp-pppoe-3.10-gentoo-netscripts.patch new file mode 100644 index 000000000000..f45557a0d6f0 --- /dev/null +++ b/net-dialup/rp-pppoe/files/rp-pppoe-3.10-gentoo-netscripts.patch @@ -0,0 +1,150 @@ +diff -Nru rp-pppoe-3.10.orig/configs/pppoe.conf rp-pppoe-3.10/configs/pppoe.conf +--- rp-pppoe-3.10.orig/configs/pppoe.conf 2008-06-30 16:00:42.000000000 +0200 ++++ rp-pppoe-3.10/configs/pppoe.conf 2008-06-30 22:22:32.000000000 +0200 +@@ -21,6 +21,9 @@ + # When you configure a variable, DO NOT leave spaces around the "=" sign. + + # Ethernet card connected to DSL modem ++# ++# NB: Gentoo overrides ETH when pppoe-start is called from the ++# networking scripts. This setting has no effect in that case. + ETH=eth1 + + # PPPoE user name. You may have to supply "@provider.com" Sympatico +@@ -86,8 +89,10 @@ + # $PIDFILE contains PID of pppoe-connect script + # $PIDFILE.pppoe contains PID of pppoe process + # $PIDFILE.pppd contains PID of pppd process +-CF_BASE=`basename $CONFIG` +-PIDFILE="/var/run/$CF_BASE-pppoe.pid" ++# ++# NB: Gentoo overrides PIDFILE when pppoe-start is run from the ++# networking scripts. This setting has no effect in that case. ++PIDFILE="/var/run/rp-pppoe.pid" + + # Do you want to use synchronous PPP? "yes" or "no". "yes" is much + # easier on CPU usage, but may not work for you. It is safer to use +diff -Nru rp-pppoe-3.10.orig/scripts/pppoe-connect.in rp-pppoe-3.10/scripts/pppoe-connect.in +--- rp-pppoe-3.10.orig/scripts/pppoe-connect.in 2008-06-30 16:00:42.000000000 +0200 ++++ rp-pppoe-3.10/scripts/pppoe-connect.in 2008-06-30 22:22:32.000000000 +0200 +@@ -62,12 +62,17 @@ + ;; + esac + +-if test ! -f "$CONFIG" -o ! -r "$CONFIG" ; then ++# In Gentoo, CONFIG is a named pipe when pppoe is started by the ++# network scripts. Testing -r is allowed; testing -f is not. ++if test ! -r "$CONFIG" ; then + echo "$0: Cannot read configuration file '$CONFIG'" >& 2 + exit 1 + fi +-export CONFIG +-. $CONFIG ++ ++# Read the named pipe (/dev/fd/foo) into a variable so we can use it ++# again later (since reading once from the pipe will exhaust it) ++CONFREAD=$(<$CONFIG) ++eval "$CONFREAD" + + PPPOE_PIDFILE="$PIDFILE.pppoe" + PPPD_PIDFILE="$PIDFILE.pppd" +diff -Nru rp-pppoe-3.10.orig/scripts/pppoe-start.in rp-pppoe-3.10/scripts/pppoe-start.in +--- rp-pppoe-3.10.orig/scripts/pppoe-start.in 2008-06-30 16:00:42.000000000 +0200 ++++ rp-pppoe-3.10/scripts/pppoe-start.in 2008-06-30 22:22:32.000000000 +0200 +@@ -1,4 +1,4 @@ +-#!/bin/sh ++#!/bin/bash + # @configure_input@ + #*********************************************************************** + # +@@ -113,12 +113,17 @@ + ;; + esac + +-if [ ! -f "$CONFIG" -o ! -r "$CONFIG" ] ; then ++# In Gentoo, CONFIG is a named pipe when pppoe is started by the ++# network scripts. Testing -r is allowed; testing -f is not. ++if [ ! -r "$CONFIG" ] ; then + $ECHO "$ME: Cannot read configuration file '$CONFIG'" >& 2 + exit 1 + fi +-export CONFIG +-. $CONFIG ++ ++# Read the named pipe (/dev/fd/foo) into a variable so we can use it ++# again later (since reading once from the pipe will exhaust it) ++CONFREAD=$(<$CONFIG) ++eval "$CONFREAD" + + # Check for command-line overriding of ETH and USER + case "$#" in +@@ -145,11 +150,11 @@ + + # Start the connection in the background unless we're debugging + if [ "$DEBUG" != "" ] ; then +- $CONNECT "$@" ++ $CONNECT <(echo "$CONFREAD") + exit 0 + fi + +-$CONNECT "$@" > /dev/null 2>&1 & ++$CONNECT <(echo "$CONFREAD") >/dev/null 2>&1 & + CONNECT_PID=$! + + if [ "$CONNECT_TIMEOUT" = "" -o "$CONNECT_TIMEOUT" = 0 ] ; then +@@ -164,7 +169,7 @@ + # Monitor connection + TIME=0 + while [ true ] ; do +- @sbindir@/pppoe-status $CONFIG > /dev/null 2>&1 ++ @sbindir@/pppoe-status <(echo "$CONFREAD") >/dev/null 2>&1 + + # Looks like the interface came up + if [ $? = 0 ] ; then +diff -Nru rp-pppoe-3.10.orig/scripts/pppoe-status rp-pppoe-3.10/scripts/pppoe-status +--- rp-pppoe-3.10.orig/scripts/pppoe-status 2008-06-30 16:00:42.000000000 +0200 ++++ rp-pppoe-3.10/scripts/pppoe-status 2008-06-30 22:22:32.000000000 +0200 +@@ -28,12 +28,17 @@ + ;; + esac + +-if [ ! -f "$CONFIG" -o ! -r "$CONFIG" ] ; then ++# In Gentoo, CONFIG is a named pipe when pppoe is started by the ++# network scripts. Testing -r is allowed; testing -f is not. ++if [ ! -r "$CONFIG" ] ; then + echo "$0: Cannot read configuration file '$CONFIG'" >& 2 + exit 1 + fi + +-. $CONFIG ++# Read the named pipe (/dev/fd/foo) into a variable so we can use it ++# again later (since reading once from the pipe will exhaust it) ++CONFREAD=$(<$CONFIG) ++eval "$CONFREAD" + + PPPOE_PIDFILE="$PIDFILE.pppoe" + PPPD_PIDFILE="$PIDFILE.pppd" +diff -Nru rp-pppoe-3.10.orig/scripts/pppoe-stop.in rp-pppoe-3.10/scripts/pppoe-stop.in +--- rp-pppoe-3.10.orig/scripts/pppoe-stop.in 2008-06-30 16:00:42.000000000 +0200 ++++ rp-pppoe-3.10/scripts/pppoe-stop.in 2008-06-30 22:22:32.000000000 +0200 +@@ -31,12 +31,17 @@ + CONFIG=/etc/ppp/pppoe.conf + fi + +-if [ ! -f "$CONFIG" -o ! -r "$CONFIG" ] ; then ++# In Gentoo, CONFIG is a named pipe when pppoe is started by the ++# network scripts. Testing -r is allowed; testing -f is not. ++if [ ! -r "$CONFIG" ] ; then + echo "$ME: Cannot read configuration file '$CONFIG'" >& 2 + exit 1 + fi +-export CONFIG +-. $CONFIG ++ ++# Read the named pipe (/dev/fd/foo) into a variable so we can use it ++# again later (since reading once from the pipe will exhaust it) ++CONFREAD=$(<$CONFIG) ++eval "$CONFREAD" + + PPPOE_PIDFILE="$PIDFILE.pppoe" + PPPD_PIDFILE="$PIDFILE.pppd" diff --git a/net-dialup/rp-pppoe/files/rp-pppoe-3.10-linux-headers.patch b/net-dialup/rp-pppoe/files/rp-pppoe-3.10-linux-headers.patch new file mode 100644 index 000000000000..47e504bf7835 --- /dev/null +++ b/net-dialup/rp-pppoe/files/rp-pppoe-3.10-linux-headers.patch @@ -0,0 +1,31 @@ +diff -Nru rp-pppoe-3.10.orig/src/pppoe.h rp-pppoe-3.10/src/pppoe.h +--- rp-pppoe-3.10.orig/src/pppoe.h 2008-06-30 16:00:43.000000000 +0200 ++++ rp-pppoe-3.10/src/pppoe.h 2008-06-30 23:25:54.000000000 +0200 +@@ -19,6 +19,13 @@ + + extern int IsSetID; + ++/* Ugly header files on some Linux boxes... */ ++#if defined(HAVE_LINUX_IF_H) ++#include ++#elif defined(HAVE_NET_IF_H) ++#include ++#endif ++ + #if defined(HAVE_NETPACKET_PACKET_H) || defined(HAVE_LINUX_IF_PACKET_H) + #define _POSIX_SOURCE 1 /* For sigaction defines */ + #endif +@@ -51,13 +58,6 @@ + #include + #endif + +-/* Ugly header files on some Linux boxes... */ +-#if defined(HAVE_LINUX_IF_H) +-#include +-#elif defined(HAVE_NET_IF_H) +-#include +-#endif +- + #ifdef HAVE_NET_IF_TYPES_H + #include + #endif diff --git a/net-dialup/rp-pppoe/files/rp-pppoe-3.10-plugin-options.patch b/net-dialup/rp-pppoe/files/rp-pppoe-3.10-plugin-options.patch new file mode 100644 index 000000000000..d1593392ba23 --- /dev/null +++ b/net-dialup/rp-pppoe/files/rp-pppoe-3.10-plugin-options.patch @@ -0,0 +1,33 @@ +diff -Nru rp-pppoe-3.10.orig/configs/pppoe.conf rp-pppoe-3.10/configs/pppoe.conf +--- rp-pppoe-3.10.orig/configs/pppoe.conf 2008-06-30 22:23:11.000000000 +0200 ++++ rp-pppoe-3.10/configs/pppoe.conf 2008-06-30 22:33:08.000000000 +0200 +@@ -120,7 +120,7 @@ + FIREWALL=NONE + + # Linux kernel-mode plugin for pppd. If you want to try the kernel-mode +-# plugin, use LINUX_PLUGIN=/etc/ppp/plugins/rp-pppoe.so ++# plugin, use LINUX_PLUGIN=rp-pppoe.so + LINUX_PLUGIN= + + # Any extra arguments to pass to pppoe. Normally, use a blank string +diff -Nru rp-pppoe-3.10.orig/scripts/pppoe-connect.in rp-pppoe-3.10/scripts/pppoe-connect.in +--- rp-pppoe-3.10.orig/scripts/pppoe-connect.in 2008-06-30 22:23:11.000000000 +0200 ++++ rp-pppoe-3.10/scripts/pppoe-connect.in 2008-06-30 22:33:08.000000000 +0200 +@@ -202,7 +202,7 @@ + + # If we're using kernel-mode PPPoE on Linux... + if test "$LINUX_PLUGIN" != "" ; then +- PLUGIN_OPTS="plugin $LINUX_PLUGIN nic-$ETH" ++ PLUGIN_OPTS="plugin $LINUX_PLUGIN" + if test -n "$SERVICENAME" ; then + PLUGIN_OPTS="$PLUGIN_OPTS rp_pppoe_service $SERVICENAME" + fi +@@ -297,7 +297,7 @@ + $SETSID $OVERRIDE_PPPD_COMMAND & + echo "$!" > $PPPD_PIDFILE + elif test "$LINUX_PLUGIN" != "" ; then +- $SETSID $PPPD $PPP_STD_OPTIONS $DEMAND & ++ $SETSID $PPPD $DEMAND $PPP_STD_OPTIONS & + echo "$!" > $PPPD_PIDFILE + else + $SETSID $PPPD pty "$PPPOE_CMD" \ diff --git a/net-dialup/rp-pppoe/files/rp-pppoe-3.10-session-offset.patch b/net-dialup/rp-pppoe/files/rp-pppoe-3.10-session-offset.patch new file mode 100644 index 000000000000..303ecfa9e4b7 --- /dev/null +++ b/net-dialup/rp-pppoe/files/rp-pppoe-3.10-session-offset.patch @@ -0,0 +1,21 @@ +diff -Nru rp-pppoe-3.10.orig/src/pppoe-server.c rp-pppoe-3.10/src/pppoe-server.c +--- rp-pppoe-3.10.orig/src/pppoe-server.c 2008-06-30 16:00:43.000000000 +0200 ++++ rp-pppoe-3.10/src/pppoe-server.c 2008-06-30 22:35:11.000000000 +0200 +@@ -1751,7 +1751,7 @@ + } + if (PassUnitOptionToPPPD) { + argv[c++] = "unit"; +- sprintf(buffer, "%u", (unsigned int) (ntohs(session->sess) - 1 - SessOffset)); ++ sprintf(buffer, "%u", (unsigned int) (ntohs(session->sess) - 1)); + argv[c++] = buffer; + } + argv[c++] = NULL; +@@ -1834,7 +1834,7 @@ + argv[c++] = "default-asyncmap"; + if (PassUnitOptionToPPPD) { + argv[c++] = "unit"; +- sprintf(buffer, "%u", (unsigned int) (ntohs(session->sess) - 1 - SessOffset)); ++ sprintf(buffer, "%u", (unsigned int) (ntohs(session->sess) - 1)); + argv[c++] = buffer; + } + argv[c++] = NULL; diff --git a/net-dialup/rp-pppoe/files/rp-pppoe-3.10-username-charset.patch b/net-dialup/rp-pppoe/files/rp-pppoe-3.10-username-charset.patch new file mode 100644 index 000000000000..8ef99a4b7aa9 --- /dev/null +++ b/net-dialup/rp-pppoe/files/rp-pppoe-3.10-username-charset.patch @@ -0,0 +1,58 @@ +diff -Nru rp-pppoe-3.10.orig/scripts/pppoe-setup.in rp-pppoe-3.10/scripts/pppoe-setup.in +--- rp-pppoe-3.10.orig/scripts/pppoe-setup.in 2008-06-30 16:00:42.000000000 +0200 ++++ rp-pppoe-3.10/scripts/pppoe-setup.in 2008-06-30 22:23:40.000000000 +0200 +@@ -86,11 +86,13 @@ + $ECHO "USER NAME" + $ECHO "" + printf "%s" ">>> Enter your PPPoE user name (default $USER): " +- read U ++ read Uu + +- if [ "$U" = "" ] ; then +- U="$USER" ++ if [ "$Uu" = "" ] ; then ++ Uu="$USER" + fi ++ ++ U=`echo $Uu | sed -e "s/&/\\\\\&/g"` + + # Under Linux, "fix" the default interface if eth1 is not available + if test `uname -s` = "Linux" ; then +@@ -221,7 +223,7 @@ + $ECHO "** Summary of what you entered **" + $ECHO "" + $ECHO "Ethernet Interface: $E" +- $ECHO "User name: $U" ++ $ECHO "User name: $Uu" + if [ "$D" = "no" ] ; then + $ECHO "Activate-on-demand: No" + else +@@ -288,7 +290,12 @@ + fi + + # Some #$(*& ISP's use a slash in the user name... +-sed -e "s&^USER=.*&USER='$U'&" \ ++for SEP in ':' ';' '/' '!' '|' '_' '-' '@' ; do ++ if [ "$U" = `echo $U | sed "sI${SEP}II"` ]; then ++ break; ++ fi ++done ++sed -e "s${SEP}^USER=.*${SEP}USER='$U'${SEP}"\ + -e "s&^ETH=.*Ð='$E'&" \ + -e "s&^PIDFILE=.*&PIDFILE=\"$VARRUN/\$CF_BASE-pppoe.pid\"&" \ + -e "s/^FIREWALL=.*/FIREWALL=$FIREWALL/" \ +@@ -337,10 +344,10 @@ + cp /dev/null /etc/ppp/chap-secrets-bak + fi + +-egrep -v "^$U|^\"$U\"" /etc/ppp/pap-secrets-bak > /etc/ppp/pap-secrets +-$ECHO "\"$U\" * \"$PWD1\"" >> /etc/ppp/pap-secrets +-egrep -v "^$U|^\"$U\"" /etc/ppp/chap-secrets-bak > /etc/ppp/chap-secrets +-$ECHO "\"$U\" * \"$PWD1\"" >> /etc/ppp/chap-secrets ++egrep -v "^$Uu|^\"$Uu\"" /etc/ppp/pap-secrets-bak > /etc/ppp/pap-secrets ++$ECHO "\"$Uu\" * \"$PWD1\"" >> /etc/ppp/pap-secrets ++egrep -v "^$Uu|^\"$Uu\"" /etc/ppp/chap-secrets-bak > /etc/ppp/chap-secrets ++$ECHO "\"$Uu\" * \"$PWD1\"" >> /etc/ppp/chap-secrets + + $ECHO "" + $ECHO "" diff --git a/net-dialup/rp-pppoe/rp-pppoe-3.10.ebuild b/net-dialup/rp-pppoe/rp-pppoe-3.10.ebuild new file mode 100644 index 000000000000..616773dae1b0 --- /dev/null +++ b/net-dialup/rp-pppoe/rp-pppoe-3.10.ebuild @@ -0,0 +1,82 @@ +# Copyright 1999-2008 Gentoo Foundation +# Distributed under the terms of the GNU General Public License v2 +# $Header: /var/cvsroot/gentoo-x86/net-dialup/rp-pppoe/rp-pppoe-3.10.ebuild,v 1.1 2008/06/30 21:40:25 mrness Exp $ + +WANT_AUTOCONF="latest" +WANT_AUTOMAKE="latest" + +inherit eutils flag-o-matic autotools + +DESCRIPTION="A user-mode PPPoE client and server suite for Linux" +HOMEPAGE="http://www.roaringpenguin.com/pppoe/" +SRC_URI="http://www.roaringpenguin.com/files/download/${P}.tar.gz + ftp://ftp.samba.org/pub/ppp/ppp-2.4.4.tar.gz" + +LICENSE="GPL-2" +SLOT="0" +KEYWORDS="~alpha ~amd64 ~arm ~hppa ~mips ~ppc ~ppc64 ~sh ~sparc ~x86" +IUSE="X" + +DEPEND="