Version bump. Fix configure logic for cache since it's tied to thin-provisioning-tools.

(Portage version: 2.2.10/cvs/Linux x86_64, signed Manifest commit with key 4868F14D)

4 files changed, 424 insertions, 1 deletions

diff --git a/sys-fs/lvm2/ChangeLog b/sys-fs/lvm2/ChangeLog
index 2065ac6519cd..f7a2c254aad1 100644
--- a/sys-fs/lvm2/ChangeLog
+++ b/sys-fs/lvm2/ChangeLog
@@ -1,6 +1,14 @@
 # ChangeLog for sys-fs/lvm2
 # Copyright 1999-2014 Gentoo Foundation; Distributed under the GPL v2
-# $Header: /var/cvsroot/gentoo-x86/sys-fs/lvm2/ChangeLog,v 1.356 2014/07/25 19:50:59 ssuominen Exp $
+# $Header: /var/cvsroot/gentoo-x86/sys-fs/lvm2/ChangeLog,v 1.357 2014/07/30 17:11:27 ssuominen Exp $
+
+*lvm2-2.02.108 (30 Jul 2014)
+
+  30 Jul 2014; Samuli Suominen <ssuominen@gentoo.org>
+  +files/lvm2-2.02.108-example.conf.in.patch,
+  +files/lvm2-2.02.108-static-pkgconfig-libs.patch, +lvm2-2.02.108.ebuild:
+  Version bump. Fix configure logic for cache since it's tied to thin-
+  provisioning-tools.
 
   25 Jul 2014; Samuli Suominen <ssuominen@gentoo.org> lvm2-2.02.103.ebuild,
   lvm2-2.02.105-r2.ebuild, lvm2-2.02.106.ebuild, lvm2-2.02.107.ebuild:
diff --git a/sys-fs/lvm2/files/lvm2-2.02.108-example.conf.in.patch b/sys-fs/lvm2/files/lvm2-2.02.108-example.conf.in.patch
new file mode 100644
index 000000000000..af5a5afe258d
--- /dev/null
+++ b/sys-fs/lvm2/files/lvm2-2.02.108-example.conf.in.patch
@@ -0,0 +1,50 @@
+Maintainer note: Forward ported without editing from lvm2-2.02.99-example.conf.in.patch to apply cleanly.
+
+--- conf/example.conf.in
++++ conf/example.conf.in
+@@ -105,6 +105,10 @@
+     # By default we accept every block device:
+     # filter = [ "a/.*/" ]
+ 
++    # Gentoo: we exclude /dev/nbd by default, because it makes a lot of kernel
++    # noise when you probed while not available.
++    filter = [ "r|/dev/nbd.*|", "a/.*/" ]
++
+     # Exclude the cdrom drive
+     # filter = [ "r|/dev/cdrom|" ]
+ 
+@@ -522,7 +526,8 @@
+     # e.g. vgscan.lvm1 and they will stop working after you start using
+     # the new lvm2 on-disk metadata format.
+     # The default value is set when the tools are built.
+-    # fallback_to_lvm1 = 0
++    # Gentoo: the LVM tools are a seperate package.
++    fallback_to_lvm1 = 0
+ 
+     # The default metadata format that commands should use - "lvm1" or "lvm2".
+     # The command line override is -M1 or -M2.
+@@ -1182,12 +1187,13 @@
+ 
+ # Metadata settings
+ #
+-# metadata {
++metadata {
+     # Default number of copies of metadata to hold on each PV.  0, 1 or 2.
+     # You might want to override it from the command line with 0 
+     # when running pvcreate on new PVs which are to be added to large VGs.
+ 
+-    # pvmetadatacopies = 1
++    # Gentoo: enable for data safety, but PV resize is then disabled.
++    # pvmetadatacopies = 2
+ 
+     # Default number of copies of metadata to maintain for each VG.
+     # If set to a non-zero value, LVM automatically chooses which of
+@@ -1222,7 +1228,7 @@
+     # the supplied toolset to make changes (e.g. vgcfgrestore).
+ 
+     # dirs = [ "/etc/lvm/metadata", "/mnt/disk2/lvm/metadata2" ]
+-#}
++}
+ 
+ # Event daemon
+ #
diff --git a/sys-fs/lvm2/files/lvm2-2.02.108-static-pkgconfig-libs.patch b/sys-fs/lvm2/files/lvm2-2.02.108-static-pkgconfig-libs.patch
new file mode 100644
index 000000000000..3ab699868a5d
--- /dev/null
+++ b/sys-fs/lvm2/files/lvm2-2.02.108-static-pkgconfig-libs.patch
@@ -0,0 +1,104 @@
+Maintainer note: Forward ported without editing from lvm2-2.02.107-static-pkgconfig-libs.patch to apply cleanly.
+
+--- configure.in
++++ configure.in
+@@ -1067,6 +1067,7 @@
+ 			   fi])
+ 	if test "$BLKID_WIPING" = yes; then
+ 		BLKID_PC="blkid"
++		BLKID_STATIC_LIBS=`$PKG_CONFIG --static --libs $BLKID_PC`
+ 		AC_DEFINE([BLKID_WIPING_SUPPORT], 1, [Define to 1 to use libblkid detection of signatures when wiping.])
+ 	fi
+ fi
+@@ -1092,6 +1093,7 @@
+ if test "$UDEV_SYNC" = yes; then
+ 	pkg_config_init
+ 	PKG_CHECK_MODULES(UDEV, libudev >= 143, [UDEV_PC="libudev"])
++	UDEV_STATIC_LIBS=`$PKG_CONFIG --static --libs libudev`
+ 	AC_DEFINE([UDEV_SYNC_SUPPORT], 1, [Define to 1 to enable synchronisation with udev processing.])
+ fi
+ 
+@@ -1312,19 +1314,32 @@
+ if test "$SELINUX" = yes; then
+ 	AC_CHECK_LIB([sepol], [sepol_check_context], [
+ 		AC_DEFINE([HAVE_SEPOL], 1, [Define to 1 if sepol_check_context is available.])
+-		SELINUX_LIBS="-lsepol"])
++		SEPOL_LIBS="-lsepol"])
++
++	dnl -- init pkgconfig if required
++	if  test x$PKGCONFIG_INIT != x1; then
++		pkg_config_init
++	fi
++	PKG_CHECK_MODULES(SELINUX, libselinux, [
++		SELINUX_PC="libselinux"
++		SELINUX_STATIC_LIBS=`$PKG_CONFIG --static --libs libselinux`
++		SELINUX_LIBS="$SELINUX_LIBS $SEPOL_LIBS"
++		AC_DEFINE([HAVE_SELINUX], 1, [Define to 1 to include support for selinux.])
++	],[
++		dnl -- old non-pkgconfig method, is buggy with static builds
+ 
+ 	AC_CHECK_LIB([selinux], [is_selinux_enabled], [
+ 		AC_CHECK_HEADERS([selinux/selinux.h],, hard_bailout)
+ 		AC_CHECK_HEADERS([selinux/label.h])
+ 		AC_DEFINE([HAVE_SELINUX], 1, [Define to 1 to include support for selinux.])
+-		SELINUX_LIBS="-lselinux $SELINUX_LIBS"
++		SELINUX_LIBS="-lselinux $SEPOL_LIBS"
+ 		SELINUX_PC="libselinux"
+ 		HAVE_SELINUX=yes ], [
+ 		AC_MSG_WARN(Disabling selinux)
+ 		SELINUX_LIBS=
+ 		SELINUX_PC=
+ 		HAVE_SELINUX=no ])
++	])
+ fi
+ 
+ ################################################################################
+@@ -1626,6 +1641,7 @@
+ ################################################################################
+ AC_SUBST(APPLIB)
+ AC_SUBST(AWK)
++AC_SUBST(BLKID_STATIC_LIBS)
+ AC_SUBST(BLKID_PC)
+ AC_SUBST(BLKID_WIPING)
+ AC_SUBST(BUILD_CMIRRORD)
+@@ -1721,6 +1737,7 @@
+ AC_SUBST(SALCK_CFLAGS)
+ AC_SUBST(SALCK_LIBS)
+ AC_SUBST(SELINUX_LIBS)
++AC_SUBST(SELINUX_STATIC_LIBS)
+ AC_SUBST(SELINUX_PC)
+ AC_SUBST(SNAPSHOTS)
+ AC_SUBST(STATICDIR)
+@@ -1735,6 +1752,7 @@
+ AC_SUBST(CACHE_DUMP_CMD)
+ AC_SUBST(CACHE_REPAIR_CMD)
+ AC_SUBST(CACHE_RESTORE_CMD)
++AC_SUBST(UDEV_STATIC_LIBS)
+ AC_SUBST(UDEV_PC)
+ AC_SUBST(UDEV_RULES)
+ AC_SUBST(UDEV_SYNC)
+--- make.tmpl.in
++++ make.tmpl.in
+@@ -43,7 +43,7 @@
+ 
+ LIBS = @LIBS@
+ # Extra libraries always linked with static binaries
+-STATIC_LIBS = $(SELINUX_LIBS) $(UDEV_LIBS) $(BLKID_LIBS)
++STATIC_LIBS = $(SELINUX_STATIC_LIBS) $(UDEV_STATIC_LIBS) $(BLKID_STATIC_LIBS)
+ DEFS += @DEFS@
+ # FIXME set this only where it's needed, not globally?
+ CFLAGS += @CFLAGS@
+@@ -57,10 +57,13 @@
+ PTHREAD_LIBS = @PTHREAD_LIBS@
+ READLINE_LIBS = @READLINE_LIBS@
+ SELINUX_LIBS = @SELINUX_LIBS@
++SELINUX_STATIC_LIBS = @SELINUX_STATIC_LIBS@
+ UDEV_CFLAGS = @UDEV_CFLAGS@
+ UDEV_LIBS = @UDEV_LIBS@
++UDEV_STATIC_LIBS = @UDEV_STATIC_LIBS@
+ BLKID_CFLAGS = @BLKID_CFLAGS@
+ BLKID_LIBS = @BLKID_LIBS@
++BLKID_STATIC_LIBS = @BLKID_STATIC_LIBS@
+ TESTING = @TESTING@
+ 
+ # Setup directory variables
diff --git a/sys-fs/lvm2/lvm2-2.02.108.ebuild b/sys-fs/lvm2/lvm2-2.02.108.ebuild
new file mode 100644
index 000000000000..260380ac2079
--- /dev/null
+++ b/sys-fs/lvm2/lvm2-2.02.108.ebuild
@@ -0,0 +1,261 @@
+# Copyright 1999-2014 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/sys-fs/lvm2/lvm2-2.02.108.ebuild,v 1.1 2014/07/30 17:11:27 ssuominen Exp $
+
+EAPI=5
+inherit autotools eutils linux-info multilib systemd toolchain-funcs udev flag-o-matic
+
+DESCRIPTION="User-land utilities for LVM2 (device-mapper) software."
+HOMEPAGE="http://sources.redhat.com/lvm2/"
+SRC_URI="ftp://sources.redhat.com/pub/lvm2/${PN/lvm/LVM}.${PV}.tgz
+	ftp://sources.redhat.com/pub/lvm2/old/${PN/lvm/LVM}.${PV}.tgz"
+
+LICENSE="GPL-2"
+SLOT="0"
+KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~mips ~ppc ~ppc64 ~s390 ~sh ~sparc ~x86 ~amd64-linux ~x86-linux"
+IUSE="readline static static-libs systemd clvm cman lvm1 lvm2create_initrd selinux +udev +thin device-mapper-only"
+REQUIRED_USE="device-mapper-only? ( !clvm !cman !lvm1 !lvm2create_initrd !thin )"
+
+DEPEND_COMMON="clvm? ( cman? ( =sys-cluster/cman-3* ) =sys-cluster/libdlm-3* )
+	readline? ( sys-libs/readline )
+	udev? ( >=virtual/libudev-208:=[static-libs?] )"
+# /run is now required for locking during early boot. /var cannot be assumed to
+# be available -- thus, pull in recent enough baselayout for /run.
+# This version of LVM is incompatible with cryptsetup <1.1.2.
+RDEPEND="${DEPEND_COMMON}
+	>=sys-apps/baselayout-2.2
+	!<sys-apps/openrc-0.11
+	!<sys-fs/cryptsetup-1.1.2
+	!!sys-fs/clvm
+	!!sys-fs/lvm-user
+	>=sys-apps/util-linux-2.16
+	lvm2create_initrd? ( sys-apps/makedev )
+	thin? ( >=sys-block/thin-provisioning-tools-0.3.0 )"
+# note: thin- 0.3.0 is required to avoid --disable-thin_check_needs_check
+DEPEND="${DEPEND_COMMON}
+	virtual/pkgconfig
+	>=sys-devel/binutils-2.20.1-r1
+	static? (
+		selinux? ( sys-libs/libselinux[static-libs] )
+		udev? ( >=virtual/libudev-208:=[static-libs] )
+		>=sys-apps/util-linux-2.16[static-libs]
+	)"
+
+S=${WORKDIR}/${PN/lvm/LVM}.${PV}
+
+pkg_setup() {
+	local CONFIG_CHECK="~SYSVIPC"
+
+	if use udev; then
+		local WARNING_SYSVIPC="CONFIG_SYSVIPC:\tis not set (required for udev sync)\n"
+		if linux_config_exists; then
+			local uevent_helper_path=$(linux_chkconfig_string UEVENT_HELPER_PATH)
+			if [ -n "${uevent_helper_path}" ] && [ "${uevent_helper_path}" != '""' ]; then
+				ewarn "It's recommended to set an empty value to the following kernel config option:"
+				ewarn "CONFIG_UEVENT_HELPER_PATH=${uevent_helper_path}"
+			fi
+		fi
+	fi
+
+	check_extra_config
+
+	# 1. Genkernel no longer copies /sbin/lvm blindly.
+	if use static; then
+		elog "Warning, we no longer overwrite /sbin/lvm and /sbin/dmsetup with"
+		elog "their static versions. If you need the static binaries,"
+		elog "you must append .static to the filename!"
+	fi
+}
+
+src_prepare() {
+	# Gentoo specific modification(s):
+	epatch "${FILESDIR}"/${PN}-2.02.108-example.conf.in.patch
+
+	sed -i \
+		-e "1iAR = $(tc-getAR)" \
+		-e "s:CC ?= @CC@:CC = $(tc-getCC):" \
+		make.tmpl.in || die #444082
+
+	sed -i -e '/FLAG/s:-O2::' configure{.in,} || die #480212
+
+	# For upstream -- review and forward:
+	epatch "${FILESDIR}"/${PN}-2.02.63-always-make-static-libdm.patch
+	epatch "${FILESDIR}"/${PN}-2.02.56-lvm2create_initrd.patch
+	epatch "${FILESDIR}"/${PN}-2.02.67-createinitrd.patch #301331
+	epatch "${FILESDIR}"/${PN}-2.02.99-locale-muck.patch #330373
+	epatch "${FILESDIR}"/${PN}-2.02.70-asneeded.patch # -Wl,--as-needed
+	epatch "${FILESDIR}"/${PN}-2.02.92-dynamic-static-ldflags.patch #332905
+	epatch "${FILESDIR}"/${PN}-2.02.108-static-pkgconfig-libs.patch #370217, #439414 + blkid
+	epatch "${FILESDIR}"/${PN}-2.02.106-pthread-pkgconfig.patch #492450
+	# Upstream never tested with USE="-thin" wrt #510202
+	sed -i -e 's|_man7: $(MAN8)|_man7: $(MAN7)|' man/Makefile.in || die
+	use thin || { sed -i -e '/^install_lvm2/s:install_man7::' man/Makefile.in || die; }
+
+	eautoreconf
+}
+
+src_configure() {
+	filter-flags -flto
+	local myconf
+	local buildmode
+
+	myconf="${myconf} $(use_enable !device-mapper-only dmeventd)"
+	myconf="${myconf} $(use_enable !device-mapper-only cmdlib)"
+	myconf="${myconf} $(use_enable !device-mapper-only applib)"
+	myconf="${myconf} $(use_enable !device-mapper-only fsadm)"
+	myconf="${myconf} $(use_enable !device-mapper-only lvmetad)"
+	use device-mapper-only && myconf="${myconf} --disable-udev-systemd-background-jobs"
+
+	# Most of this package does weird stuff.
+	# The build options are tristate, and --without is NOT supported
+	# options: 'none', 'internal', 'shared'
+	if use static; then
+		buildmode="internal"
+		# This only causes the .static versions to become available
+		myconf="${myconf} --enable-static_link"
+	else
+		buildmode="shared"
+	fi
+	dmbuildmode=$(use !device-mapper-only && echo internal || echo none)
+
+	# dmeventd requires mirrors to be internal, and snapshot available
+	# so we cannot disable them
+	myconf="${myconf} --with-mirrors=${dmbuildmode}"
+	myconf="${myconf} --with-snapshots=${dmbuildmode}"
+	if use thin; then
+		myconf="${myconf} --with-thin=internal --with-cache=internal"
+		local texec
+		for texec in check dump repair restore; do
+			myconf="${myconf} --with-thin-${texec}=${EPREFIX}/sbin/thin_${texec}"
+			myconf="${myconf} --with-cache-${texec}=${EPREFIX}/sbin/cache_${texec}"
+		done
+	else
+		myconf="${myconf} --with-thin=none --with-cache=none"
+	fi
+
+	if use lvm1; then
+		myconf="${myconf} --with-lvm1=${buildmode}"
+	else
+		myconf="${myconf} --with-lvm1=none"
+	fi
+
+	# disable O_DIRECT support on hppa, breaks pv detection (#99532)
+	use hppa && myconf="${myconf} --disable-o_direct"
+
+	if use clvm; then
+		myconf="${myconf} --with-cluster=${buildmode}"
+		# 4-state! Make sure we get it right, per bug 210879
+		# Valid options are: none, cman, gulm, all
+		#
+		# 2009/02:
+		# gulm is removed now, now dual-state:
+		# cman, none
+		# all still exists, but is not needed
+		#
+		# 2009/07:
+		# TODO: add corosync and re-enable ALL
+		local clvmd=""
+		use cman && clvmd="cman"
+		#clvmd="${clvmd/cmangulm/all}"
+		[ -z "${clvmd}" ] && clvmd="none"
+		myconf="${myconf} --with-clvmd=${clvmd}"
+		myconf="${myconf} --with-pool=${buildmode}"
+	else
+		myconf="${myconf} --with-clvmd=none --with-cluster=none"
+	fi
+
+	econf \
+		$(use_enable readline) \
+		$(use_enable selinux) \
+		--enable-pkgconfig \
+		--with-confdir="${EPREFIX}"/etc \
+		--exec-prefix="${EPREFIX}" \
+		--sbindir="${EPREFIX}/sbin" \
+		--with-staticdir="${EPREFIX}"/sbin \
+		--libdir="${EPREFIX}/$(get_libdir)" \
+		--with-usrlibdir="${EPREFIX}/usr/$(get_libdir)" \
+		--with-default-dm-run-dir=/run \
+		--with-default-run-dir=/run/lvm \
+		--with-default-locking-dir=/run/lock/lvm \
+		--with-default-pid-dir=/run \
+		$(use_enable udev udev_rules) \
+		$(use_enable udev udev_sync) \
+		$(use_with udev udevdir "$(get_udevdir)"/rules.d) \
+		$(use_enable systemd udev-systemd-background-jobs) \
+		"$(systemd_with_unitdir)" \
+		${myconf} \
+		CLDFLAGS="${LDFLAGS}"
+}
+
+src_compile() {
+	pushd include >/dev/null
+	emake
+	popd >/dev/null
+
+	if use device-mapper-only ; then
+		emake device-mapper
+	else
+		emake
+		emake CC="$(tc-getCC)" -C scripts lvm2_activation_generator_systemd_red_hat
+	fi
+}
+
+src_install() {
+	local inst
+	INSTALL_TARGETS="install install_systemd_units install_systemd_generators install_tmpfiles_configuration"
+	use device-mapper-only && INSTALL_TARGETS="install_device-mapper"
+	for inst in ${INSTALL_TARGETS}; do
+		emake DESTDIR="${D}" ${inst}
+	done
+
+	newinitd "${FILESDIR}"/device-mapper.rc-2.02.105-r2 device-mapper
+	newconfd "${FILESDIR}"/device-mapper.conf-1.02.22-r3 device-mapper
+
+	if use !device-mapper-only ; then
+		newinitd "${FILESDIR}"/dmeventd.initd-2.02.67-r1 dmeventd
+		newinitd "${FILESDIR}"/lvm.rc-2.02.105-r2 lvm
+		newconfd "${FILESDIR}"/lvm.confd-2.02.28-r2 lvm
+
+		newinitd "${FILESDIR}"/lvm-monitoring.initd-2.02.105-r2 lvm-monitoring
+		newinitd "${FILESDIR}"/lvmetad.initd-2.02.105-r2 lvmetad
+	fi
+
+	if use clvm; then
+		newinitd "${FILESDIR}"/clvmd.rc-2.02.39 clvmd
+		newconfd "${FILESDIR}"/clvmd.confd-2.02.39 clvmd
+	fi
+
+	if use static-libs; then
+		dolib.a libdm/ioctl/libdevmapper.a
+		dolib.a libdaemon/client/libdaemonclient.a #462908
+		#gen_usr_ldscript libdevmapper.so
+		dolib.a daemons/dmeventd/libdevmapper-event.a
+		#gen_usr_ldscript libdevmapper-event.so
+	else
+		rm -f "${ED}"usr/$(get_libdir)/{libdevmapper-event,liblvm2cmd,liblvm2app,libdevmapper}.a
+	fi
+
+	if use lvm2create_initrd; then
+		dosbin scripts/lvm2create_initrd/lvm2create_initrd
+		doman scripts/lvm2create_initrd/lvm2create_initrd.8
+		newdoc scripts/lvm2create_initrd/README README.lvm2create_initrd
+	fi
+
+	insinto /etc
+	doins "${FILESDIR}"/dmtab
+
+	dodoc README VERSION* WHATS_NEW WHATS_NEW_DM doc/*.{c,txt} conf/*.conf
+}
+
+pkg_postinst() {
+	ewarn "Make sure the \"lvm\" init script is in the runlevels:"
+	ewarn "# rc-update add lvm boot"
+	ewarn
+	ewarn "Make sure to enable lvmetad in /etc/lvm/lvm.conf if you want"
+	ewarn "to enable lvm autoactivation and metadata caching."
+}
+
+src_test() {
+	einfo "Tests are disabled because of device-node mucking, if you want to"
+	einfo "run tests, compile the package and see ${S}/tests"
+}