Version bump (#230013). Depend on <sys-kernel/linux-headers-2.6.24 (#227197).

(Portage version: 2.1.4.4)

9 files changed, 497 insertions, 3 deletions

diff --git a/net-dialup/rp-pppoe/ChangeLog b/net-dialup/rp-pppoe/ChangeLog
index 21ae11f3fa3b..54ae99746654 100644
--- a/net-dialup/rp-pppoe/ChangeLog
+++ b/net-dialup/rp-pppoe/ChangeLog
@@ -1,6 +1,18 @@
 # ChangeLog for net-dialup/rp-pppoe
 # Copyright 2002-2008 Gentoo Foundation; Distributed under the GPL v2
-# $Header: /var/cvsroot/gentoo-x86/net-dialup/rp-pppoe/ChangeLog,v 1.95 2008/06/30 18:50:32 bluebird Exp $
+# $Header: /var/cvsroot/gentoo-x86/net-dialup/rp-pppoe/ChangeLog,v 1.96 2008/06/30 21:40:25 mrness Exp $
+
+*rp-pppoe-3.10 (30 Jun 2008)
+
+  30 Jun 2008; Alin Năstac <mrness@gentoo.org>
+  +files/rp-pppoe-3.10-autotools.patch,
+  +files/rp-pppoe-3.10-gentoo-netscripts.patch,
+  +files/rp-pppoe-3.10-linux-headers.patch,
+  +files/rp-pppoe-3.10-plugin-options.patch,
+  +files/rp-pppoe-3.10-session-offset.patch,
+  +files/rp-pppoe-3.10-username-charset.patch, rp-pppoe-3.8-r2.ebuild,
+  +rp-pppoe-3.10.ebuild:
+  Version bump (#230013). Depend on <sys-kernel/linux-headers-2.6.24 (#227197).
 
   30 Jun 2008; Friedrich Oslage <bluebird@gentoo.org>
   rp-pppoe-3.8-r2.ebuild:
diff --git a/net-dialup/rp-pppoe/files/rp-pppoe-3.10-autotools.patch b/net-dialup/rp-pppoe/files/rp-pppoe-3.10-autotools.patch
new file mode 100644
index 000000000000..66a6e9de9bcb
--- /dev/null
+++ b/net-dialup/rp-pppoe/files/rp-pppoe-3.10-autotools.patch
@@ -0,0 +1,106 @@
+diff -Nru rp-pppoe-3.10.orig/gui/Makefile.in rp-pppoe-3.10/gui/Makefile.in
+--- rp-pppoe-3.10.orig/gui/Makefile.in	2008-06-30 16:00:41.000000000 +0200
++++ rp-pppoe-3.10/gui/Makefile.in	2008-06-30 22:30:56.000000000 +0200
+@@ -46,7 +46,7 @@
+ 	-mkdir -p $(DESTDIR)$(sbindir)
+ 	-mkdir -p $(DESTDIR)$(bindir)
+ 	-mkdir -p $(DESTDIR)/etc/ppp/rp-pppoe-gui
+-	$(install) -m 4755 -s pppoe-wrapper $(DESTDIR)$(sbindir)
++	$(install) -m 4755 pppoe-wrapper $(DESTDIR)$(sbindir)
+ 	$(install) -m 755 tkpppoe $(DESTDIR)$(bindir)
+ 	-mkdir -p $(DESTDIR)$(mandir)/man1
+ 	$(install) -m 644 pppoe-wrapper.1 $(DESTDIR)$(mandir)/man1
+diff -Nru rp-pppoe-3.10.orig/src/configure.in rp-pppoe-3.10/src/configure.in
+--- rp-pppoe-3.10.orig/src/configure.in	2008-06-30 16:00:42.000000000 +0200
++++ rp-pppoe-3.10/src/configure.in	2008-06-30 22:29:53.000000000 +0200
+@@ -45,7 +45,7 @@
+ AC_MSG_RESULT($ac_cv_struct_sockaddr_ll)
+ 
+ if test "$ac_cv_struct_sockaddr_ll" = yes ; then
+-AC_DEFINE(HAVE_STRUCT_SOCKADDR_LL)
++AC_DEFINE(HAVE_STRUCT_SOCKADDR_LL, 1, [Define if you have struct sockaddr_ll])
+ fi
+ 
+ dnl Check for N_HDLC line discipline
+@@ -56,7 +56,7 @@
+ 	ac_cv_n_hdlc=no)
+ AC_MSG_RESULT($ac_cv_n_hdlc)
+ if test "$ac_cv_n_hdlc" = yes ; then
+-AC_DEFINE(HAVE_N_HDLC)
++AC_DEFINE(HAVE_N_HDLC, 1, [Define if you have the N_HDLC line discipline in linux/termios.h])
+ fi
+ 
+ AC_ARG_ENABLE(plugin, [  --enable-plugin=pppd_src_path   build pppd plugin], ac_cv_pluginpath=$enableval, ac_cv_pluginpath=no)
+@@ -104,7 +104,7 @@
+ if test "$ac_cv_header_linux_if_pppox_h" = yes ; then
+ 	if test "$ac_cv_pluginpath" != no ; then
+ 		LINUX_KERNELMODE_PLUGIN=rp-pppoe.so
+-		AC_DEFINE(HAVE_LINUX_KERNEL_PPPOE)
++		AC_DEFINE(HAVE_LINUX_KERNEL_PPPOE, 1, [Define if you have kernel-mode PPPoE in Linux file])
+ 		PPPD_INCDIR=$ac_cv_pluginpath
+ 	fi
+ fi
+@@ -114,7 +114,7 @@
+ fi
+ 
+ if test "$ac_cv_debugging" = "yes" ; then
+-   AC_DEFINE(DEBUGGING_ENABLED)
++   AC_DEFINE(DEBUGGING_ENABLED, 1, [Define to include debugging code])
+ fi
+ 
+ AC_SUBST(LINUX_KERNELMODE_PLUGIN)
+@@ -154,15 +154,15 @@
+ AC_MSG_CHECKING(for Linux 2.4.X kernel-mode PPPoE support)
+ AC_CACHE_VAL(ac_cv_linux_kernel_pppoe,[
+ if test "`uname -s`" = "Linux" ; then
+-if test $cross_compiling = "no"; then
++dnl if test $cross_compiling = "no"; then
+ 
+ dnl Do a bunch of modprobes.  Can't hurt; might help.
+-modprobe ppp_generic > /dev/null 2>&1
+-modprobe ppp_async > /dev/null 2>&1
+-modprobe n_hdlc > /dev/null 2>&1
+-modprobe ppp_synctty > /dev/null 2>&1
+-modprobe pppoe > /dev/null 2>&1
+-fi
++dnl modprobe ppp_generic > /dev/null 2>&1
++dnl modprobe ppp_async > /dev/null 2>&1
++dnl modprobe n_hdlc > /dev/null 2>&1
++dnl modprobe ppp_synctty > /dev/null 2>&1
++dnl modprobe pppoe > /dev/null 2>&1
++dnl fi
+ AC_TRY_RUN([#include <sys/socket.h>
+ #include <net/ethernet.h>
+ #include <linux/if.h>
+@@ -258,7 +258,7 @@
+ 
+ if test "$rpppoe_cv_pack_bitfields" = "rev" ; then
+ 	AC_MSG_RESULT(reversed)
+-	AC_DEFINE(PACK_BITFIELDS_REVERSED)
++	AC_DEFINE(PACK_BITFIELDS_REVERSED, 1, [Define if bitfields are packed in reverse order])
+ else
+ 	AC_MSG_RESULT(normal)
+ fi
+diff -Nru rp-pppoe-3.10.orig/src/plugin.c rp-pppoe-3.10/src/plugin.c
+--- rp-pppoe-3.10.orig/src/plugin.c	2008-06-30 16:00:43.000000000 +0200
++++ rp-pppoe-3.10/src/plugin.c	2008-06-30 22:27:18.000000000 +0200
+@@ -27,7 +27,6 @@
+ static char const RCSID[] =
+ "$Id: rp-pppoe-3.10-autotools.patch,v 1.1 2008/06/30 21:40:26 mrness Exp $";
+ 
+-#define _GNU_SOURCE 1
+ #include "pppoe.h"
+ 
+ #include "pppd/pppd.h"
+diff -Nru rp-pppoe-3.10.orig/src/relay.c rp-pppoe-3.10/src/relay.c
+--- rp-pppoe-3.10.orig/src/relay.c	2008-06-30 16:00:43.000000000 +0200
++++ rp-pppoe-3.10/src/relay.c	2008-06-30 22:27:18.000000000 +0200
+@@ -17,8 +17,6 @@
+ static char const RCSID[] =
+ "$Id: rp-pppoe-3.10-autotools.patch,v 1.1 2008/06/30 21:40:26 mrness Exp $";
+ 
+-#define _GNU_SOURCE 1 /* For SA_RESTART */
+-
+ #include "relay.h"
+ 
+ #include <signal.h>
diff --git a/net-dialup/rp-pppoe/files/rp-pppoe-3.10-gentoo-netscripts.patch b/net-dialup/rp-pppoe/files/rp-pppoe-3.10-gentoo-netscripts.patch
new file mode 100644
index 000000000000..f45557a0d6f0
--- /dev/null
+++ b/net-dialup/rp-pppoe/files/rp-pppoe-3.10-gentoo-netscripts.patch
@@ -0,0 +1,150 @@
+diff -Nru rp-pppoe-3.10.orig/configs/pppoe.conf rp-pppoe-3.10/configs/pppoe.conf
+--- rp-pppoe-3.10.orig/configs/pppoe.conf	2008-06-30 16:00:42.000000000 +0200
++++ rp-pppoe-3.10/configs/pppoe.conf	2008-06-30 22:22:32.000000000 +0200
+@@ -21,6 +21,9 @@
+ # When you configure a variable, DO NOT leave spaces around the "=" sign.
+ 
+ # Ethernet card connected to DSL modem
++#
++# NB: Gentoo overrides ETH when pppoe-start is called from the
++# networking scripts.  This setting has no effect in that case.
+ ETH=eth1
+ 
+ # PPPoE user name.  You may have to supply "@provider.com"  Sympatico
+@@ -86,8 +89,10 @@
+ #   $PIDFILE       contains PID of pppoe-connect script
+ #   $PIDFILE.pppoe contains PID of pppoe process
+ #   $PIDFILE.pppd  contains PID of pppd process
+-CF_BASE=`basename $CONFIG`
+-PIDFILE="/var/run/$CF_BASE-pppoe.pid"
++#
++# NB: Gentoo overrides PIDFILE when pppoe-start is run from the
++# networking scripts.  This setting has no effect in that case.
++PIDFILE="/var/run/rp-pppoe.pid"
+ 
+ # Do you want to use synchronous PPP?  "yes" or "no".  "yes" is much
+ # easier on CPU usage, but may not work for you.  It is safer to use
+diff -Nru rp-pppoe-3.10.orig/scripts/pppoe-connect.in rp-pppoe-3.10/scripts/pppoe-connect.in
+--- rp-pppoe-3.10.orig/scripts/pppoe-connect.in	2008-06-30 16:00:42.000000000 +0200
++++ rp-pppoe-3.10/scripts/pppoe-connect.in	2008-06-30 22:22:32.000000000 +0200
+@@ -62,12 +62,17 @@
+     ;;
+ esac
+ 
+-if test ! -f "$CONFIG" -o ! -r "$CONFIG" ; then
++# In Gentoo, CONFIG is a named pipe when pppoe is started by the
++# network scripts.  Testing -r is allowed; testing -f is not.
++if test ! -r "$CONFIG" ; then
+     echo "$0: Cannot read configuration file '$CONFIG'" >& 2
+     exit 1
+ fi
+-export CONFIG
+-. $CONFIG
++
++# Read the named pipe (/dev/fd/foo) into a variable so we can use it
++# again later (since reading once from the pipe will exhaust it)
++CONFREAD=$(<$CONFIG)
++eval "$CONFREAD"
+ 
+ PPPOE_PIDFILE="$PIDFILE.pppoe"
+ PPPD_PIDFILE="$PIDFILE.pppd"
+diff -Nru rp-pppoe-3.10.orig/scripts/pppoe-start.in rp-pppoe-3.10/scripts/pppoe-start.in
+--- rp-pppoe-3.10.orig/scripts/pppoe-start.in	2008-06-30 16:00:42.000000000 +0200
++++ rp-pppoe-3.10/scripts/pppoe-start.in	2008-06-30 22:22:32.000000000 +0200
+@@ -1,4 +1,4 @@
+-#!/bin/sh
++#!/bin/bash
+ # @configure_input@
+ #***********************************************************************
+ #
+@@ -113,12 +113,17 @@
+ 	;;
+ esac
+ 
+-if [ ! -f "$CONFIG" -o ! -r "$CONFIG" ] ; then
++# In Gentoo, CONFIG is a named pipe when pppoe is started by the
++# network scripts.  Testing -r is allowed; testing -f is not.
++if [ ! -r "$CONFIG" ] ; then
+     $ECHO "$ME: Cannot read configuration file '$CONFIG'" >& 2
+     exit 1
+ fi
+-export CONFIG
+-. $CONFIG
++
++# Read the named pipe (/dev/fd/foo) into a variable so we can use it
++# again later (since reading once from the pipe will exhaust it)
++CONFREAD=$(<$CONFIG)
++eval "$CONFREAD"
+ 
+ # Check for command-line overriding of ETH and USER
+ case "$#" in
+@@ -145,11 +150,11 @@
+ 
+ # Start the connection in the background unless we're debugging
+ if [ "$DEBUG" != "" ] ; then
+-    $CONNECT "$@"
++    $CONNECT <(echo "$CONFREAD")
+     exit 0
+ fi
+ 
+-$CONNECT "$@" > /dev/null 2>&1 &
++$CONNECT <(echo "$CONFREAD") >/dev/null 2>&1 &
+ CONNECT_PID=$!
+ 
+ if [ "$CONNECT_TIMEOUT" = "" -o "$CONNECT_TIMEOUT" = 0 ] ; then
+@@ -164,7 +169,7 @@
+ # Monitor connection
+ TIME=0
+ while [ true ] ; do
+-    @sbindir@/pppoe-status $CONFIG > /dev/null 2>&1
++    @sbindir@/pppoe-status <(echo "$CONFREAD") >/dev/null 2>&1
+ 
+     # Looks like the interface came up
+     if [ $? = 0 ] ; then
+diff -Nru rp-pppoe-3.10.orig/scripts/pppoe-status rp-pppoe-3.10/scripts/pppoe-status
+--- rp-pppoe-3.10.orig/scripts/pppoe-status	2008-06-30 16:00:42.000000000 +0200
++++ rp-pppoe-3.10/scripts/pppoe-status	2008-06-30 22:22:32.000000000 +0200
+@@ -28,12 +28,17 @@
+ 	;;
+ esac
+ 
+-if [ ! -f "$CONFIG" -o ! -r "$CONFIG" ] ; then
++# In Gentoo, CONFIG is a named pipe when pppoe is started by the
++# network scripts.  Testing -r is allowed; testing -f is not.
++if [ ! -r "$CONFIG" ] ; then
+     echo "$0: Cannot read configuration file '$CONFIG'" >& 2
+     exit 1
+ fi
+ 
+-. $CONFIG
++# Read the named pipe (/dev/fd/foo) into a variable so we can use it
++# again later (since reading once from the pipe will exhaust it)
++CONFREAD=$(<$CONFIG)
++eval "$CONFREAD"
+ 
+ PPPOE_PIDFILE="$PIDFILE.pppoe"
+ PPPD_PIDFILE="$PIDFILE.pppd"
+diff -Nru rp-pppoe-3.10.orig/scripts/pppoe-stop.in rp-pppoe-3.10/scripts/pppoe-stop.in
+--- rp-pppoe-3.10.orig/scripts/pppoe-stop.in	2008-06-30 16:00:42.000000000 +0200
++++ rp-pppoe-3.10/scripts/pppoe-stop.in	2008-06-30 22:22:32.000000000 +0200
+@@ -31,12 +31,17 @@
+     CONFIG=/etc/ppp/pppoe.conf
+ fi
+ 
+-if [ ! -f "$CONFIG" -o ! -r "$CONFIG" ] ; then
++# In Gentoo, CONFIG is a named pipe when pppoe is started by the
++# network scripts.  Testing -r is allowed; testing -f is not.
++if [ ! -r "$CONFIG" ] ; then
+     echo "$ME: Cannot read configuration file '$CONFIG'" >& 2
+     exit 1
+ fi
+-export CONFIG
+-. $CONFIG
++
++# Read the named pipe (/dev/fd/foo) into a variable so we can use it
++# again later (since reading once from the pipe will exhaust it)
++CONFREAD=$(<$CONFIG)
++eval "$CONFREAD"
+ 
+ PPPOE_PIDFILE="$PIDFILE.pppoe"
+ PPPD_PIDFILE="$PIDFILE.pppd"
diff --git a/net-dialup/rp-pppoe/files/rp-pppoe-3.10-linux-headers.patch b/net-dialup/rp-pppoe/files/rp-pppoe-3.10-linux-headers.patch
new file mode 100644
index 000000000000..47e504bf7835
--- /dev/null
+++ b/net-dialup/rp-pppoe/files/rp-pppoe-3.10-linux-headers.patch
@@ -0,0 +1,31 @@
+diff -Nru rp-pppoe-3.10.orig/src/pppoe.h rp-pppoe-3.10/src/pppoe.h
+--- rp-pppoe-3.10.orig/src/pppoe.h	2008-06-30 16:00:43.000000000 +0200
++++ rp-pppoe-3.10/src/pppoe.h	2008-06-30 23:25:54.000000000 +0200
+@@ -19,6 +19,13 @@
+ 
+ extern int IsSetID;
+ 
++/* Ugly header files on some Linux boxes... */
++#if defined(HAVE_LINUX_IF_H)
++#include <linux/if.h>
++#elif defined(HAVE_NET_IF_H)
++#include <net/if.h>
++#endif
++
+ #if defined(HAVE_NETPACKET_PACKET_H) || defined(HAVE_LINUX_IF_PACKET_H)
+ #define _POSIX_SOURCE 1 /* For sigaction defines */
+ #endif
+@@ -51,13 +58,6 @@
+ #include <sys/socket.h>
+ #endif
+ 
+-/* Ugly header files on some Linux boxes... */
+-#if defined(HAVE_LINUX_IF_H)
+-#include <linux/if.h>
+-#elif defined(HAVE_NET_IF_H)
+-#include <net/if.h>
+-#endif
+-
+ #ifdef HAVE_NET_IF_TYPES_H
+ #include <net/if_types.h>
+ #endif
diff --git a/net-dialup/rp-pppoe/files/rp-pppoe-3.10-plugin-options.patch b/net-dialup/rp-pppoe/files/rp-pppoe-3.10-plugin-options.patch
new file mode 100644
index 000000000000..d1593392ba23
--- /dev/null
+++ b/net-dialup/rp-pppoe/files/rp-pppoe-3.10-plugin-options.patch
@@ -0,0 +1,33 @@
+diff -Nru rp-pppoe-3.10.orig/configs/pppoe.conf rp-pppoe-3.10/configs/pppoe.conf
+--- rp-pppoe-3.10.orig/configs/pppoe.conf	2008-06-30 22:23:11.000000000 +0200
++++ rp-pppoe-3.10/configs/pppoe.conf	2008-06-30 22:33:08.000000000 +0200
+@@ -120,7 +120,7 @@
+ FIREWALL=NONE
+ 
+ # Linux kernel-mode plugin for pppd.  If you want to try the kernel-mode
+-# plugin, use LINUX_PLUGIN=/etc/ppp/plugins/rp-pppoe.so
++# plugin, use LINUX_PLUGIN=rp-pppoe.so
+ LINUX_PLUGIN=
+ 
+ # Any extra arguments to pass to pppoe.  Normally, use a blank string
+diff -Nru rp-pppoe-3.10.orig/scripts/pppoe-connect.in rp-pppoe-3.10/scripts/pppoe-connect.in
+--- rp-pppoe-3.10.orig/scripts/pppoe-connect.in	2008-06-30 22:23:11.000000000 +0200
++++ rp-pppoe-3.10/scripts/pppoe-connect.in	2008-06-30 22:33:08.000000000 +0200
+@@ -202,7 +202,7 @@
+ 
+ # If we're using kernel-mode PPPoE on Linux...
+ if test "$LINUX_PLUGIN" != "" ; then
+-    PLUGIN_OPTS="plugin $LINUX_PLUGIN nic-$ETH"
++    PLUGIN_OPTS="plugin $LINUX_PLUGIN"
+     if test -n "$SERVICENAME" ; then
+ 	PLUGIN_OPTS="$PLUGIN_OPTS rp_pppoe_service $SERVICENAME"
+     fi
+@@ -297,7 +297,7 @@
+ 	$SETSID $OVERRIDE_PPPD_COMMAND &
+ 	echo "$!" > $PPPD_PIDFILE
+     elif test "$LINUX_PLUGIN" != "" ; then
+-	$SETSID $PPPD $PPP_STD_OPTIONS $DEMAND &
++	$SETSID $PPPD $DEMAND $PPP_STD_OPTIONS &
+ 	echo "$!" > $PPPD_PIDFILE
+     else
+ 	$SETSID $PPPD pty "$PPPOE_CMD" \
diff --git a/net-dialup/rp-pppoe/files/rp-pppoe-3.10-session-offset.patch b/net-dialup/rp-pppoe/files/rp-pppoe-3.10-session-offset.patch
new file mode 100644
index 000000000000..303ecfa9e4b7
--- /dev/null
+++ b/net-dialup/rp-pppoe/files/rp-pppoe-3.10-session-offset.patch
@@ -0,0 +1,21 @@
+diff -Nru rp-pppoe-3.10.orig/src/pppoe-server.c rp-pppoe-3.10/src/pppoe-server.c
+--- rp-pppoe-3.10.orig/src/pppoe-server.c	2008-06-30 16:00:43.000000000 +0200
++++ rp-pppoe-3.10/src/pppoe-server.c	2008-06-30 22:35:11.000000000 +0200
+@@ -1751,7 +1751,7 @@
+     }
+     if (PassUnitOptionToPPPD) {
+ 	argv[c++] = "unit";
+-	sprintf(buffer, "%u", (unsigned int) (ntohs(session->sess) - 1 - SessOffset));
++	sprintf(buffer, "%u", (unsigned int) (ntohs(session->sess) - 1));
+ 	argv[c++] = buffer;
+     }
+     argv[c++] = NULL;
+@@ -1834,7 +1834,7 @@
+     argv[c++] = "default-asyncmap";
+     if (PassUnitOptionToPPPD) {
+ 	argv[c++] = "unit";
+-	sprintf(buffer, "%u", (unsigned int) (ntohs(session->sess) - 1 - SessOffset));
++	sprintf(buffer, "%u", (unsigned int) (ntohs(session->sess) - 1));
+ 	argv[c++] = buffer;
+     }
+     argv[c++] = NULL;
diff --git a/net-dialup/rp-pppoe/files/rp-pppoe-3.10-username-charset.patch b/net-dialup/rp-pppoe/files/rp-pppoe-3.10-username-charset.patch
new file mode 100644
index 000000000000..8ef99a4b7aa9
--- /dev/null
+++ b/net-dialup/rp-pppoe/files/rp-pppoe-3.10-username-charset.patch
@@ -0,0 +1,58 @@
+diff -Nru rp-pppoe-3.10.orig/scripts/pppoe-setup.in rp-pppoe-3.10/scripts/pppoe-setup.in
+--- rp-pppoe-3.10.orig/scripts/pppoe-setup.in	2008-06-30 16:00:42.000000000 +0200
++++ rp-pppoe-3.10/scripts/pppoe-setup.in	2008-06-30 22:23:40.000000000 +0200
+@@ -86,11 +86,13 @@
+     $ECHO "USER NAME"
+     $ECHO ""
+     printf "%s" ">>> Enter your PPPoE user name (default $USER): "
+-    read U
++    read Uu
+ 
+-    if [ "$U" = "" ] ; then
+-	U="$USER"
++    if [ "$Uu" = "" ] ; then
++	Uu="$USER"
+     fi
++  
++    U=`echo $Uu | sed -e "s/&/\\\\\&/g"`
+ 
+     # Under Linux, "fix" the default interface if eth1 is not available
+     if test `uname -s` = "Linux" ; then
+@@ -221,7 +223,7 @@
+     $ECHO "** Summary of what you entered **"
+     $ECHO ""
+     $ECHO "Ethernet Interface: $E"
+-    $ECHO "User name:          $U"
++    $ECHO "User name:          $Uu"
+     if [ "$D" = "no" ] ; then
+ 	$ECHO "Activate-on-demand: No"
+     else
+@@ -288,7 +290,12 @@
+ fi
+ 
+ # Some #$(*& ISP's use a slash in the user name...
+-sed -e "s&^USER=.*&USER='$U'&" \
++for SEP in ':' ';' '/' '!' '|' '_' '-' '@' ; do 
++	if [ "$U" = `echo $U | sed "sI${SEP}II"` ]; then 
++		break;
++	fi
++done
++sed -e "s${SEP}^USER=.*${SEP}USER='$U'${SEP}"\
+     -e "s&^ETH=.*&ETH='$E'&" \
+     -e "s&^PIDFILE=.*&PIDFILE=\"$VARRUN/\$CF_BASE-pppoe.pid\"&" \
+     -e "s/^FIREWALL=.*/FIREWALL=$FIREWALL/" \
+@@ -337,10 +344,10 @@
+     cp /dev/null /etc/ppp/chap-secrets-bak
+ fi
+ 
+-egrep -v "^$U|^\"$U\"" /etc/ppp/pap-secrets-bak > /etc/ppp/pap-secrets
+-$ECHO "\"$U\"	*	\"$PWD1\"" >> /etc/ppp/pap-secrets
+-egrep -v "^$U|^\"$U\"" /etc/ppp/chap-secrets-bak > /etc/ppp/chap-secrets
+-$ECHO "\"$U\"	*	\"$PWD1\"" >> /etc/ppp/chap-secrets
++egrep -v "^$Uu|^\"$Uu\"" /etc/ppp/pap-secrets-bak > /etc/ppp/pap-secrets
++$ECHO "\"$Uu\"	*	\"$PWD1\"" >> /etc/ppp/pap-secrets
++egrep -v "^$Uu|^\"$Uu\"" /etc/ppp/chap-secrets-bak > /etc/ppp/chap-secrets
++$ECHO "\"$Uu\"	*	\"$PWD1\"" >> /etc/ppp/chap-secrets
+ 
+ $ECHO ""
+ $ECHO ""
diff --git a/net-dialup/rp-pppoe/rp-pppoe-3.10.ebuild b/net-dialup/rp-pppoe/rp-pppoe-3.10.ebuild
new file mode 100644
index 000000000000..616773dae1b0
--- /dev/null
+++ b/net-dialup/rp-pppoe/rp-pppoe-3.10.ebuild
@@ -0,0 +1,82 @@
+# Copyright 1999-2008 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/net-dialup/rp-pppoe/rp-pppoe-3.10.ebuild,v 1.1 2008/06/30 21:40:25 mrness Exp $
+
+WANT_AUTOCONF="latest"
+WANT_AUTOMAKE="latest"
+
+inherit eutils flag-o-matic autotools
+
+DESCRIPTION="A user-mode PPPoE client and server suite for Linux"
+HOMEPAGE="http://www.roaringpenguin.com/pppoe/"
+SRC_URI="http://www.roaringpenguin.com/files/download/${P}.tar.gz
+	ftp://ftp.samba.org/pub/ppp/ppp-2.4.4.tar.gz"
+
+LICENSE="GPL-2"
+SLOT="0"
+KEYWORDS="~alpha ~amd64 ~arm ~hppa ~mips ~ppc ~ppc64 ~sh ~sparc ~x86"
+IUSE="X"
+
+DEPEND="<sys-kernel/linux-headers-2.6.24
+	net-dialup/ppp
+	X? ( dev-lang/tk )"
+
+src_unpack() {
+	unpack ${A} || die "failed to unpack"
+
+	# Patch to enable integration of pppoe-start and pppoe-stop with
+	# baselayout-1.11.x so that the pidfile can be found reliably per interface
+	epatch "${FILESDIR}/${P}-gentoo-netscripts.patch"
+
+	epatch "${FILESDIR}/${P}-username-charset.patch" # bug 82410
+	epatch "${FILESDIR}/${P}-plugin-options.patch"
+	epatch "${FILESDIR}/${P}-autotools.patch"
+	epatch "${FILESDIR}/${P}-session-offset.patch" # bug 204476
+	epatch "${FILESDIR}/${P}-linux-headers.patch"
+
+	cd "${S}"/src
+	eautoreconf
+}
+
+src_compile() {
+	addpredict /dev/ppp
+
+	cd "${S}/src"
+	econf --enable-plugin=../../ppp-2.4.4 || die "econf failed"
+	emake || die "emake failed"
+
+	if use X; then
+		make -C "${S}/gui" || die "gui make failed"
+	fi
+}
+
+src_install () {
+	cd "${S}/src"
+	emake DESTDIR="${D}" docdir=/usr/share/doc/${PF} install \
+		|| die "install failed"
+
+	#Don't use compiled rp-pppoe plugin - see pkg_preinst below
+	rm "${D}/etc/ppp/plugins/rp-pppoe.so"
+
+	prepalldocs
+
+	if use X; then
+		emake -C "${S}/gui" DESTDIR="${D}" datadir=/usr/share/doc/${PF}/ install \
+			|| die "gui install failed"
+		dosym /usr/share/doc/${PF}/tkpppoe /usr/share/tkpppoe
+	fi
+}
+
+pkg_preinst() {
+	# Use the rp-pppoe plugin that comes with net-dialup/pppd
+	local PPPD_VER=`best_version net-dialup/ppp`
+	PPPD_VER=${PPPD_VER#*/*-} #reduce it to ${PV}-${PR}
+	PPPD_VER=${PPPD_VER%%-*} #reduce it to ${PV}
+	if [ -n "${PPPD_VER}" ] && [ -f "${ROOT}/usr/lib/pppd/${PPPD_VER}/rp-pppoe.so" ] ; then
+		dosym /usr/lib/pppd/${PPPD_VER}/rp-pppoe.so /etc/ppp/plugins/rp-pppoe.so
+	fi
+}
+
+pkg_postinst() {
+	elog "Use pppoe-setup to configure your dialup connection."
+}
diff --git a/net-dialup/rp-pppoe/rp-pppoe-3.8-r2.ebuild b/net-dialup/rp-pppoe/rp-pppoe-3.8-r2.ebuild
index c43da8c8a2c5..bc2362d30209 100644
--- a/net-dialup/rp-pppoe/rp-pppoe-3.8-r2.ebuild
+++ b/net-dialup/rp-pppoe/rp-pppoe-3.8-r2.ebuild
@@ -1,6 +1,6 @@
 # Copyright 1999-2008 Gentoo Foundation
 # Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/net-dialup/rp-pppoe/rp-pppoe-3.8-r2.ebuild,v 1.7 2008/06/30 18:50:32 bluebird Exp $
+# $Header: /var/cvsroot/gentoo-x86/net-dialup/rp-pppoe/rp-pppoe-3.8-r2.ebuild,v 1.8 2008/06/30 21:40:25 mrness Exp $
 
 WANT_AUTOCONF="latest"
 WANT_AUTOMAKE="latest"
@@ -17,7 +17,8 @@ SLOT="0"
 KEYWORDS="alpha ~amd64 ~arm hppa ~mips ~ppc ppc64 ~sh sparc x86"
 IUSE="X"
 
-DEPEND="net-dialup/ppp
+DEPEND="<sys-kernel/linux-headers-2.6.24
+	net-dialup/ppp
 	X? ( dev-lang/tk )"
 
 src_unpack() {